wp/Marlin-2-0-x-Anycubic-i3-MEGA-S
1
0
Fork 0
Code Issues 28 Pull Requests 2 Actions Packages Projects Releases 30 Wiki Activity

Merge pull request #538 from stklcode/marlin-2.1.2.4

Browse Source 
Merge upstream changes from Marlin 2.1.2.4
This commit is contained in:
Oliver Köster
2024-06-24 11:03:01 +02:00
committed by GitHub
parent 1ef65dc26b d74a36128d
commit c41a85354a
38 changed files with 101 additions and 94 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
Marlin/Configuration.h
View File

@@ -35,7 +35,7 @@
*
* Advanced settings can be found in Configuration_adv.h
*/
#define CONFIGURATION_H_VERSION 02010203
#define CONFIGURATION_H_VERSION 02010204
#define ANYCUBIC_TOUCHSCREEN
#define KNUTWURST_SPECIAL_MENU
// #define ANYCUBIC_TFT_DEBUG

2
Marlin/Configuration_adv.h
View File

@@ -30,7 +30,7 @@
*
* Basic settings can be found in Configuration.h
*/
#define CONFIGURATION_ADV_H_VERSION 02010203
#define CONFIGURATION_ADV_H_VERSION 02010204
// @section develop

2
Marlin/Version.h
View File

@@ -28,7 +28,7 @@
/**
* Marlin release version identifier
*/
//#define SHORT_BUILD_VERSION "2.1.2.3"
//#define SHORT_BUILD_VERSION "2.1.2.4"
/**
* Verbose version identifier which should contain a reference to the location

2
Marlin/src/HAL/AVR/fast_pwm.cpp
View File

@@ -150,7 +150,7 @@ void MarlinHAL::set_pwm_frequency(const pin_t pin, const uint16_t f_desired) {
else {
if (p == 32 || p == 128) continue; // Skip TIMER2 specific prescalers when not TIMER2
const uint16_t rft = (F_CPU) / (p * f_desired);
DEBUG_ECHOLNPGM("(Not Timer 2) F_CPU=" STRINGIFY(F_CPU), " prescaler=", p, " f_desired=", f_desired);
DEBUG_ECHOLNPGM("(Not Timer 2) F_CPU=", STRINGIFY(F_CPU), " prescaler=", p, " f_desired=", f_desired);
res_fast_temp = rft - 1;
res_pc_temp = rft / 2;
}

3
Marlin/src/HAL/AVR/fastio/fastio_1280.h
View File

@@ -28,9 +28,6 @@
* Port : E0 E1 E4 E5 G5 E3 H3 H4 H5 H6 B4 B5 B6 B7 J1 J0 H1 H0 D3 D2 D1 D0 A0 A1 A2 A3 A4 A5 A6 A7 C7 C6 C5 C4 C3 C2 C1 C0 D7 G2 G1 G0 L7 L6 L5 L4 L3 L2 L1 L0 B3 B2 B1 B0 F0 F1 F2 F3 F4 F5 F6 F7 K0 K1 K2 K3 K4 K5 K6 K7 | E2 E6 E7 xx xx H2 H7 G3 G4 xx xx xx xx xx D4 D5 D6 xx xx J2 J3 J4 J5 J6 J7 xx xx xx xx xx
* Logical Pin : 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 | 78 79 80 xx xx 84 85 71 70 xx xx xx xx xx 81 82 83 xx xx 72 73 75 76 77 74 xx xx xx xx xx
* Analog Input : 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
*
* Arduino Pin Layout video: https://youtu.be/rIqeVCX09FA
* AVR alternate pin function overview video: https://youtu.be/1yd8wuI5Plg
*/
#include "../fastio.h"

3
Marlin/src/HAL/AVR/fastio/fastio_1281.h
View File

@@ -26,9 +26,6 @@
*
* Logical Pin: 38 39 40 41 42 43 44 45 16 10 11 12 06 07 08 09 30 31 32 33 34 35 36 37 17 18 19 20 21 22 23 24 00 01 13 05 02 03 14 15 46 47 48 49 50 51 52 53 25 26 27 28 29 04
* Port: A0 A1 A2 A3 A4 A5 A6 A7 B0 B1 B2 B3 B4 B5 B6 B7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 E0 E1 E2 E3 E4 E5 E6 E7 F0 F1 F2 F3 F4 F5 F6 F7 G0 G1 G2 G3 G4 G5
*
* Arduino Pin Layout video: https://youtu.be/rIqeVCX09FA
* AVR alternate pin function overview video: https://youtu.be/1yd8wuI5Plg
*/
#include "../fastio.h"

3
Marlin/src/HAL/AVR/fastio/fastio_168.h
View File

@@ -26,9 +26,6 @@
*
* Logical Pin: 08 09 10 11 12 13 14 15 16 17 18 19 20 21 00 01 02 03 04 05 06 07
* Port: B0 B1 B2 B3 B4 B5 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7
*
* Arduino Pin Layout video: https://youtu.be/rIqeVCX09FA
* AVR alternate pin function overview video: https://youtu.be/1yd8wuI5Plg
*/
#include "../fastio.h"

3
Marlin/src/HAL/AVR/fastio/fastio_644.h
View File

@@ -26,9 +26,6 @@
*
* Logical Pin: 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
* Port: B0 B1 B2 B3 B4 B5 B6 B7 D0 D1 D2 D3 D4 D5 D6 D7 C0 C1 C2 C3 C4 C5 C6 C7 A7 A6 A5 A4 A3 A2 A1 A0
*
* Arduino Pin Layout video: https://youtu.be/rIqeVCX09FA
* AVR alternate pin function overview video: https://youtu.be/1yd8wuI5Plg
*/
/** ATMega644

3
Marlin/src/HAL/AVR/fastio/fastio_AT90USB.h
View File

@@ -27,9 +27,6 @@
* Logical Pin: 28 29 30 31 32 33 34 35 20 21 22 23 24 25 26 27 10 11 12 13 14 15 16 17 00 01 02 03 04 05 06 07 08 09(46*47)36 37 18 19 38 39 40 41 42 43 44 45
* Port: A0 A1 A2 A3 A4 A5 A6 A7 B0 B1 B2 B3 B4 B5 B6 B7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 E0 E1 E2 E3 E4 E5 E6 E7 F0 F1 F2 F3 F4 F5 F6 F7
* The logical pins 46 and 47 are not supported by Teensyduino, but are supported below as E2 and E3
*
* Arduino Pin Layout video: https://youtu.be/rIqeVCX09FA
* AVR alternate pin function overview video: https://youtu.be/1yd8wuI5Plg
*/
#include "../fastio.h"

9
Marlin/src/HAL/DUE/inc/SanityCheck.h
View File

@@ -68,16 +68,15 @@
* Usually the hardware SPI pins are only available to the LCD. This makes the DUE hard SPI used at the same time
* as the TMC2130 soft SPI the most common setup.
*/
#define _IS_HW_SPI(P) (defined(TMC_SPI_##P) && (TMC_SPI_##P == SD_MOSI_PIN || TMC_SPI_##P == SD_MISO_PIN || TMC_SPI_##P == SD_SCK_PIN))
#if HAS_MEDIA && HAS_DRIVER(TMC2130)
#if ENABLED(TMC_USE_SW_SPI)
#if DISABLED(DUE_SOFTWARE_SPI) && (_IS_HW_SPI(MOSI) || _IS_HW_SPI(MISO) || _IS_HW_SPI(SCK))
#define _IS_HW_SPI(P) (defined(TMC_SPI_##P) && (TMC_SPI_##P == SD_MOSI_PIN || TMC_SPI_##P == SD_MISO_PIN || TMC_SPI_##P == SD_SCK_PIN))
#if DISABLED(DUE_SOFTWARE_SPI) && ENABLED(TMC_USE_SW_SPI) && (_IS_HW_SPI(MOSI) || _IS_HW_SPI(MISO) || _IS_HW_SPI(SCK))
#error "DUE hardware SPI is required but is incompatible with TMC2130 software SPI. Either disable TMC_USE_SW_SPI or use separate pins for the two SPIs."
#endif
#elif ENABLED(DUE_SOFTWARE_SPI)
#if ENABLED(DUE_SOFTWARE_SPI) && DISABLED(TMC_USE_SW_SPI)
#error "DUE software SPI is required but is incompatible with TMC2130 hardware SPI. Enable TMC_USE_SW_SPI to fix."
#endif
#undef _IS_HW_SPI
#endif
#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY

2
Marlin/src/HAL/DUE/spi_pins.h
View File

@@ -24,7 +24,7 @@
/**
* Define SPI Pins: SCK, MISO, MOSI, SS
*
* Available chip select pins for HW SPI are 4 10 52 77
* Available chip select pins for HW SPI are 4 10 52 77 87
*/
#if SDSS == 4 || SDSS == 10 || SDSS == 52 || SDSS == 77 || SDSS == 87
#if SDSS == 4

6
Marlin/src/HAL/LINUX/spi_pins.h
View File

@@ -31,12 +31,6 @@
// spiBeginTransaction.
#endif
// Onboard SD
//#define SD_SCK_PIN P0_07
//#define SD_MISO_PIN P0_08
//#define SD_MOSI_PIN P0_09
//#define SD_SS_PIN P0_06
// External SD
#ifndef SD_SCK_PIN
#define SD_SCK_PIN 50

2
Marlin/src/HAL/LPC1768/fastio.h
View File

@@ -66,7 +66,7 @@
#define _WRITE(IO,V) WRITE_PIN(IO,V)
/// toggle a pin
#define _TOGGLE(IO) _WRITE(IO, !READ(IO))
#define _TOGGLE(IO) LPC176x::gpio_toggle(IO)
/// set pin as input
#define _SET_INPUT(IO) SET_DIR_INPUT(IO)

5
Marlin/src/HAL/LPC1768/spi_pins.h
View File

@@ -30,12 +30,13 @@
// spiBeginTransaction.
#endif
/** onboard SD card */
// Onboard SD
//#define SD_SCK_PIN P0_07
//#define SD_MISO_PIN P0_08
//#define SD_MOSI_PIN P0_09
//#define SD_SS_PIN P0_06
/** external */
// External SD
#ifndef SD_SCK_PIN
#define SD_SCK_PIN P0_15
#endif

6
Marlin/src/gcode/control/M80_M81.cpp
View File

@@ -124,9 +124,9 @@ void GcodeSuite::M81() {
return;
}
#if HAS_SUICIDE
suicide();
#elif ENABLED(PSU_CONTROL)
#if ENABLED(PSU_CONTROL)
powerManager.power_off_soon();
#elif HAS_SUICIDE
suicide();
#endif
}

4
Marlin/src/inc/Version.h
View File

@@ -25,7 +25,7 @@
* Release version. Leave the Marlin version or apply a custom scheme.
*/
#ifndef SHORT_BUILD_VERSION
#define SHORT_BUILD_VERSION "2.1.2.3"
#define SHORT_BUILD_VERSION "2.1.2.4"
#endif
/**
@@ -54,7 +54,7 @@
* to alert users to major changes.
*/
#define MARLIN_HEX_VERSION 02010203
#define MARLIN_HEX_VERSION 02010204
#ifndef REQUIRED_CONFIGURATION_H_VERSION
#define REQUIRED_CONFIGURATION_H_VERSION MARLIN_HEX_VERSION
#endif

11
Marlin/src/module/stepper.cpp
View File

@@ -1610,7 +1610,7 @@ void Stepper::isr() {
#if MINIMUM_STEPPER_PULSE || MAXIMUM_STEPPER_RATE
#define ISR_PULSE_CONTROL 1
#endif
#if ISR_PULSE_CONTROL && DISABLED(I2S_STEPPER_STREAM)
#if ISR_PULSE_CONTROL && MULTISTEPPING_LIMIT > 1 && DISABLED(I2S_STEPPER_STREAM)
#define ISR_MULTI_STEPS 1
#endif
@@ -1655,10 +1655,11 @@ void Stepper::pulse_phase_isr() {
// Just update the value we will get at the end of the loop
step_events_completed += events_to_do;
// Take multiple steps per interrupt (For high speed moves)
#if ISR_MULTI_STEPS
TERN_(ISR_PULSE_CONTROL, USING_TIMED_PULSE());
// Take multiple steps per interrupt. For high speed moves.
#if ENABLED(ISR_MULTI_STEPS)
bool firstStep = true;
USING_TIMED_PULSE();
#endif
xyze_bool_t step_needed{0};
@@ -1944,7 +1945,7 @@ void Stepper::pulse_phase_isr() {
TERN_(I2S_STEPPER_STREAM, i2s_push_sample());
// TODO: need to deal with MINIMUM_STEPPER_PULSE over i2s
#if ISR_MULTI_STEPS
#if ISR_PULSE_CONTROL
START_TIMED_PULSE();
AWAIT_HIGH_PULSE();
#endif

66
Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h
View File

@@ -29,17 +29,57 @@
#define BOARD_INFO_NAME "Creality3D RAMPS"
//#define CR2020_INDUSTRIAL_SERIES // Use layout specific to CR2020
//
// 4-pin expansion header
//
#define EXP1_PIN 65 // A11 - Used by CR2020 Industrial series for case
#define EXP2_PIN 66 // A12
#define EXP3_PIN 11 // RAMPS: SERVO0_PIN
#define EXP4_PIN 12 // RAMPS: PS_ON_PIN
//
// Servos
//
#define SERVO1_PIN 12
//
// Heaters / Fans
//
#define MOSFET_B_PIN 7
#define FAN0_PIN 9
//
// Filament Runout Sensor
//
#define FIL_RUNOUT_PIN 2
#if NUM_RUNOUT_SENSORS >= 2
#define FIL_RUNOUT2_PIN 15 // Creality CR-X can use dual runout sensors
#endif
//
// Misc. Functions
//
#ifdef CR2020_INDUSTRIAL_SERIES
#if ENABLED(PSU_CONTROL) && !defined(PS_ON_PIN)
#define PS_ON_PIN 40 // Used by CR2020 Industrial series
#endif
#ifndef SUICIDE_PIN
#define SUICIDE_PIN 12 // Used by CR2020 Industrial series
#endif
#ifndef SUICIDE_PIN_STATE
#define SUICIDE_PIN_STATE HIGH
#endif
#endif
#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN)
#define CASE_LIGHT_PIN 65
#endif
//
// SD Card
//
#ifndef SD_DETECT_PIN
#if SD_CONNECTION_IS(ONBOARD)
//#define HAS_ONBOARD_SD_DETECT // If the SD_DETECT_PIN is wired up
@@ -49,28 +89,14 @@
#endif
#endif
#ifndef PS_ON_PIN
#define PS_ON_PIN 40 // Used by CR2020 Industrial series
#endif
#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN)
#define CASE_LIGHT_PIN 65
#endif
#define SERVO1_PIN 12
//
// Based on RAMPS 1.4
//
#include "pins_RAMPS.h"
//
// LCD / Controller
//
#ifndef BEEPER_PIN
#define BEEPER_PIN 37 // Always define beeper pin so Play Tone works with ExtUI
#endif
#define EXP1_PIN 65 // A11 - Used by CR2020 Industrial series for case
#define EXP2_PIN 66 // A12
#define EXP3_PIN 11 // SERVO0_PIN
#define EXP4_PIN 12 // PS_ON_PIN
#define SUICIDE_PIN 12 // Used by CR2020 Industrial series
#ifndef SUICIDE_PIN_STATE
#define SUICIDE_PIN_STATE HIGH
#endif

4
Marlin/src/pins/sam/pins_ARCHIM1.h
View File

@@ -26,10 +26,10 @@
*
* The Archim 1.0 board requires Arduino Archim addons installed.
*
* - Add the following URL to Arduino IDE's Additional Board Manager URLs:
* - Add the following URL to Arduino IDE's Additional Boards Manager URLs:
* https://raw.githubusercontent.com/ultimachine/ArduinoAddons/master/package_ultimachine_index.json
*
* - In the Arduino IDE Board Manager search for Archim and install the package.
* - In the Arduino IDE Boards Manager search for Archim and install the package.
*
* - Change your target board to "Archim".
*

4
Marlin/src/pins/sam/pins_ARCHIM2.h
View File

@@ -26,10 +26,10 @@
*
* The Archim 2.0 board requires Arduino Archim addons installed.
*
* - Add the following URL to Arduino IDE's Additional Board Manager URLs:
* - Add the following URL to Arduino IDE's Additional Boards Manager URLs:
* https://raw.githubusercontent.com/ultimachine/ArduinoAddons/master/package_ultimachine_index.json
*
* - In the Arduino IDE Board Manager search for Archim and install the package.
* - In the Arduino IDE Boards Manager search for Archim and install the package.
*
* - Change your target board to "Archim".
*

4
Marlin/src/pins/sanguino/pins_ANET_10.h
View File

@@ -35,7 +35,7 @@
*/
/**
* The standard Arduino IDE extension (board manager) for this board
* The standard Arduino IDE extension (Boards Manager) for this board
* is located at https://github.com/SkyNet3D/anet-board.
*
* Installation instructions are on that page.
@@ -52,7 +52,7 @@
*/
/**
* Another usable Arduino IDE extension (board manager) can be found at
* Another usable Arduino IDE extension (Boards Manager) can be found at
* https://github.com/Lauszus/Sanguino
*
* This extension has been tested on Arduino 1.6.12 & 1.8.0

2
Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h
View File

@@ -33,7 +33,7 @@
*/
/**
* A useable Arduino IDE extension (board manager) can be found at
* A useable Arduino IDE extension (Boards Manager) can be found at
* https://github.com/Lauszus/Sanguino
*
* This extension has been tested on Arduino 1.6.12 & 1.8.0

2
Marlin/src/pins/sanguino/pins_GEN3_PLUS.h
View File

@@ -32,7 +32,7 @@
*/
/**
* A useable Arduino IDE extension (board manager) can be found at
* A useable Arduino IDE extension (Boards Manager) can be found at
* https://github.com/Lauszus/Sanguino
*
* This extension has been tested on Arduino 1.6.12 & 1.8.0

2
Marlin/src/pins/sanguino/pins_GEN6.h
View File

@@ -36,7 +36,7 @@
*/
/**
* A useable Arduino IDE extension (board manager) can be found at
* A useable Arduino IDE extension (Boards Manager) can be found at
* https://github.com/Lauszus/Sanguino
*
* This extension has been tested on Arduino 1.6.12 & 1.8.0

2
Marlin/src/pins/sanguino/pins_GEN6_DELUXE.h
View File

@@ -32,7 +32,7 @@
*/
/**
* A useable Arduino IDE extension (board manager) can be found at
* A useable Arduino IDE extension (Boards Manager) can be found at
* https://github.com/Lauszus/Sanguino
*
* This extension has been tested on Arduino 1.6.12 & 1.8.0

2
Marlin/src/pins/sanguino/pins_GEN7_12.h
View File

@@ -42,7 +42,7 @@
*/
/**
* A useable Arduino IDE extension (board manager) can be found at
* A useable Arduino IDE extension (Boards Manager) can be found at
* https://github.com/Lauszus/Sanguino
*
* This extension has been tested on Arduino 1.6.12 & 1.8.0

2
Marlin/src/pins/sanguino/pins_GEN7_13.h
View File

@@ -32,7 +32,7 @@
*/
/**
* A useable Arduino IDE extension (board manager) can be found at
* A useable Arduino IDE extension (Boards Manager) can be found at
* https://github.com/Lauszus/Sanguino
*
* This extension has been tested on Arduino 1.6.12 & 1.8.0

2
Marlin/src/pins/sanguino/pins_GEN7_14.h
View File

@@ -38,7 +38,7 @@
*/
/**
* A useable Arduino IDE extension (board manager) can be found at
* A useable Arduino IDE extension (Boards Manager) can be found at
* https://github.com/Lauszus/Sanguino
*
* This extension has been tested on Arduino 1.6.12 & 1.8.0

2
Marlin/src/pins/sanguino/pins_GEN7_CUSTOM.h
View File

@@ -37,7 +37,7 @@
*/
/**
* A useable Arduino IDE extension (board manager) can be found at
* A useable Arduino IDE extension (Boards Manager) can be found at
* https://github.com/Lauszus/Sanguino
*
* This extension has been tested on Arduino 1.6.12 & 1.8.0

2
Marlin/src/pins/sanguino/pins_OMCA.h
View File

@@ -59,7 +59,7 @@
*/
/**
* A useable Arduino IDE extension (board manager) can be found at
* A useable Arduino IDE extension (Boards Manager) can be found at
* https://github.com/Lauszus/Sanguino
*
* This extension has been tested on Arduino 1.6.12 & 1.8.0

2
Marlin/src/pins/sanguino/pins_OMCA_A.h
View File

@@ -57,7 +57,7 @@
*/
/**
* A useable Arduino IDE extension (board manager) can be found at
* A useable Arduino IDE extension (Boards Manager) can be found at
* https://github.com/Lauszus/Sanguino
*
* This extension has been tested on Arduino 1.6.12 & 1.8.0

2
Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h
View File

@@ -44,7 +44,7 @@
*/
/**
* A useable Arduino IDE extension (board manager) can be found at
* A useable Arduino IDE extension (Boards Manager) can be found at
* https://github.com/Lauszus/Sanguino
*
* This extension has been tested on Arduino 1.6.12 & 1.8.0

2
Marlin/src/pins/sanguino/pins_SETHI.h
View File

@@ -33,7 +33,7 @@
*/
/**
* A useable Arduino IDE extension (board manager) can be found at
* A useable Arduino IDE extension (Boards Manager) can be found at
* https://github.com/Lauszus/Sanguino
*
* This extension has been tested on Arduino 1.6.12 & 1.8.0

2
Marlin/src/sd/Sd2Card.h
View File

@@ -78,7 +78,7 @@ uint8_t const SD_CARD_TYPE_SD1 = 1, // Standard capacity V1 SD card
/**
* Define SOFTWARE_SPI to use bit-bang SPI
*/
#if ANY(MEGA_SOFT_SPI, USE_SOFTWARE_SPI)
#if ANY(MEGA_SOFT_SPI, SDFAT_USE_SOFTWARE_SPI)
#define SOFTWARE_SPI
#endif

4
Marlin/src/sd/SdFatConfig.h
View File

@@ -88,8 +88,8 @@
*/
#define MEGA_SOFT_SPI 0
// Set USE_SOFTWARE_SPI nonzero to ALWAYS use Software SPI.
#define USE_SOFTWARE_SPI 0
// Set SDFAT_USE_SOFTWARE_SPI nonzero to ALWAYS use Software SPI.
#define SDFAT_USE_SOFTWARE_SPI 0
/**
* The __cxa_pure_virtual function is an error handler that is invoked when

2
Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h
View File

@@ -33,7 +33,7 @@
/**
* Define SOFTWARE_SPI to use bit-bang SPI
*/
#if ANY(MEGA_SOFT_SPI, USE_SOFTWARE_SPI)
#if ANY(MEGA_SOFT_SPI, SDFAT_USE_SOFTWARE_SPI)
#define SOFTWARE_SPI
#endif

2
config/README.md
View File

@@ -1,3 +1,3 @@
# Where have all the configurations gone?
## https://github.com/MarlinFirmware/Configurations/archive/release-2.1.2.3.zip
## https://github.com/MarlinFirmware/Configurations/archive/release-2.1.2.4.zip

3
ini/samd51.ini
View File

@@ -15,11 +15,12 @@
[env:SAMD51_grandcentral_m4]
platform = atmelsam
board = adafruit_grandcentral_m4
build_flags = ${common.build_flags} -std=gnu++17
build_flags = ${common.build_flags} -std=gnu++17 -DUSE_TINYUSB
build_unflags = -std=gnu++11
build_src_filter = ${common.default_src_filter} +<src/HAL/SAMD51>
lib_deps = ${common.lib_deps}
SoftwareSerialM
Adafruit TinyUSB Library
extra_scripts = ${common.extra_scripts}
pre:buildroot/share/PlatformIO/scripts/SAMD51_grandcentral_m4.py
custom_marlin.HAS_MEDIA = SdFat - Adafruit Fork, Adafruit SPIFlash