wp/Marlin-2-0-x-Anycubic-i3-MEGA-S
1
0
Fork 0
Code Issues 28 Pull Requests 2 Actions Packages Projects Releases 30 Wiki Activity

Add original 4MAX Metal configuration and build profile. Also add Case Light control.

Browse Source
This commit is contained in:
Knutwurst
2021-10-31 00:09:41 +02:00
parent bf4572488f
commit c4725d946d
5 changed files with 188 additions and 64 deletions
Download Patch File Download Diff File Expand all files Collapse all files

108
Marlin/Configuration.h
View File

@@ -51,7 +51,7 @@
#define ANYCUBIC_TOUCHSCREEN
#if DISABLED(KNUTWURST_4MAXP2)
#if NONE(KNUTWURST_4MAX, KNUTWURST_4MAXP2)
#define ANYCUBIC_FILAMENT_RUNOUT_SENSOR
#endif
@@ -99,7 +99,7 @@
* this has to be enabled to alter the motherboard
* configuration for the 4MAX printer family
*/
#if ENABLED(KNUTWURST_4MAXP2)
#if EITHER(KNUTWURST_4MAX, KNUTWURST_4MAXP2)
#define ANYCUBIC_4_MAX_PRO_ENDSTOPS
#endif
@@ -515,7 +515,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*/
#if ENABLED(KNUTWURST_4MAXP2)
#if EITHER(KNUTWURST_4MAX, KNUTWURST_4MAXP2)
#define TEMP_SENSOR_0 1
#else
#define TEMP_SENSOR_0 5
@@ -528,7 +528,7 @@
#define TEMP_SENSOR_6 0
#define TEMP_SENSOR_7 0
#if ENABLED(KNUTWURST_4MAXP2)
#if EITHER(KNUTWURST_4MAXP2) // 4MAX has type 1
#define TEMP_SENSOR_BED 5
#else
#define TEMP_SENSOR_BED 1
@@ -621,12 +621,20 @@
#define DEFAULT_Kd 106.55
#endif
#if ENABLED(KNUTWURST_4MAX)
#define DEFAULT_Kp 22.2
#define DEFAULT_Ki 1.08
#define DEFAULT_Kd 114
#endif
#if ENABLED(KNUTWURST_4MAXP2)
#define DEFAULT_Kp 17.13
#define DEFAULT_Ki 0.93
#define DEFAULT_Kd 78.58
#endif
#endif // PIDTEMP
//===========================================================================
@@ -680,7 +688,7 @@
#define DEFAULT_bedKd 1675.16
#endif
#if ENABLED(KNUTWURST_4MAXP2)
#if ANY(KNUTWURST_4MAX, KNUTWURST_4MAXP2)
#define DEFAULT_bedKp 251.78
#define DEFAULT_bedKi 49.57
#define DEFAULT_bedKd 319.73
@@ -800,7 +808,7 @@
//#define ENDSTOPPULLDOWN_ZMIN_PROBE
#endif
#if ANY(KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_P, KNUTWURST_4MAXP2)
#if ANY(KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_P, KNUTWURST_4MAX, KNUTWURST_4MAXP2)
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
@@ -931,6 +939,10 @@
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 100, 400, 415 }
#endif
#if ENABLED(KNUTWURST_4MAX)
#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 80, 800, 422 }
#endif
#if ENABLED(KNUTWURST_4MAXP2)
#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 80, 800, 422 }
#endif
@@ -974,6 +986,10 @@
#endif
#endif
#if ENABLED(KNUTWURST_4MAX)
#define DEFAULT_MAX_FEEDRATE { 150, 150, 25, 30 }
#endif
#if ENABLED(KNUTWURST_4MAXP2)
#define DEFAULT_MAX_FEEDRATE { 150, 150, 25, 30 }
#endif
@@ -1003,6 +1019,10 @@
#define DEFAULT_MAX_ACCELERATION { 350, 350, 50, 20000 }
#endif
#if ENABLED(KNUTWURST_4MAX)
#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 60, 10000 }
#endif
#if ENABLED(KNUTWURST_4MAXP2)
#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 60, 10000 }
#endif
@@ -1057,6 +1077,12 @@
#define DEFAULT_TRAVEL_ACCELERATION 350 // X, Y, Z acceleration for travel (non printing) moves
#endif
#if ENABLED(KNUTWURST_4MAX)
#define DEFAULT_ACCELERATION 1500 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1500 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1800 // X, Y, Z acceleration for travel (non printing) moves
#endif
#if ENABLED(KNUTWURST_4MAXP2)
#define DEFAULT_ACCELERATION 1500 // X, Y, Z and E acceleration for printing moves
#define DEFAULT_RETRACT_ACCELERATION 1500 // E acceleration for retracts
@@ -1089,17 +1115,12 @@
#define DEFAULT_ZJERK 0.2
#endif
#if ENABLED(KNUTWURST_CHIRON)
#if ANY(KNUTWURST_CHIRON, KNUTWURST_4MAX, KNUTWURST_4MAXP2)
#define DEFAULT_XJERK 4
#define DEFAULT_YJERK 4
#define DEFAULT_ZJERK 0.4
#endif
#if ENABLED(KNUTWURST_4MAXP2)
#define DEFAULT_XJERK 4
#define DEFAULT_YJERK 4
#define DEFAULT_ZJERK 0.4
#endif
//#define TRAVEL_EXTRA_XYJERK 0.0 // Additional jerk allowance for all travel moves
@@ -1121,7 +1142,7 @@
#define DEFAULT_EJERK 8.0 // May be used by Linear Advance
#endif
#if ENABLED(KNUTWURST_4MAXP2)
#if EITHER(KNUTWURST_4MAX, KNUTWURST_4MAXP2)
#define DEFAULT_EJERK 6.0 // May be used by Linear Advance
#endif
@@ -1145,7 +1166,7 @@
#define JUNCTION_DEVIATION_MM 0.018 // (mm) Distance from real junction edge
#endif
#if ENABLED(KNUTWURST_4MAXP2)
#if EITHER(KNUTWURST_4MAX, KNUTWURST_4MAXP2)
#define JUNCTION_DEVIATION_MM 0.016 // (mm) Distance from real junction edge
#endif
#endif
@@ -1506,6 +1527,29 @@
#define INVERT_E7_DIR false
#endif
#if ENABLED(KNUTWURST_4MAX)
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false // set to true for stock drivers or TMC2208 with reversed connectors
#define INVERT_Y_DIR false // set to false for stock drivers or TMC2208 with reversed connectors
#define INVERT_Z_DIR false // set to false for stock drivers or TMC2208 with reversed connectors
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#if ENABLED(KNUTWURST_BMG)
#define INVERT_E0_DIR false // set to false for stock drivers or TMC2208 with reversed connectors
#else
#define INVERT_E0_DIR true // set to false for stock drivers or TMC2208 with reversed connectors
#endif
#define INVERT_E1_DIR false // set to false for stock drivers or TMC2208 with reversed connectors
#define INVERT_E2_DIR false
#define INVERT_E3_DIR false
#define INVERT_E4_DIR false
#define INVERT_E5_DIR false
#define INVERT_E6_DIR false
#define INVERT_E7_DIR false
#endif
#if ENABLED(KNUTWURST_4MAXP2)
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false // set to true for stock drivers or TMC2208 with reversed connectors
@@ -1599,6 +1643,29 @@
#define INVERT_E7_DIR false
#endif
#if ENABLED(KNUTWURST_4MAX)
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true // set to true for stock drivers or TMC2208 with reversed connectors
#define INVERT_Y_DIR true // set to false for stock drivers or TMC2208 with reversed connectors
#define INVERT_Z_DIR true // set to false for stock drivers or TMC2208 with reversed connectors
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
#if ENABLED(KNUTWURST_BMG)
#define INVERT_E0_DIR true // set to false for stock drivers or TMC2208 with reversed connectors
#else
#define INVERT_E0_DIR false // set to false for stock drivers or TMC2208 with reversed connectors
#endif
#define INVERT_E1_DIR true // set to false for stock drivers or TMC2208 with reversed connectors
#define INVERT_E2_DIR false
#define INVERT_E3_DIR false
#define INVERT_E4_DIR false
#define INVERT_E5_DIR false
#define INVERT_E6_DIR false
#define INVERT_E7_DIR false
#endif
#if ENABLED(KNUTWURST_4MAXP2)
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false // set to true for stock drivers or TMC2208 with reversed connectors
@@ -1695,6 +1762,17 @@
#define Y_MAX_POS Y_BED_SIZE +10
#endif
#if ENABLED(KNUTWURST_4MAX)
#define X_MIN_POS -5
#define Y_MIN_POS 0
#define Z_MIN_POS 0
#define X_BED_SIZE 210
#define Y_BED_SIZE 210
#define Z_MAX_POS 300
#define X_MAX_POS X_BED_SIZE
#define Y_MAX_POS Y_BED_SIZE
#endif
#if ENABLED(KNUTWURST_4MAXP2)
#define X_MIN_POS -6
#define Y_MIN_POS 0
@@ -2003,7 +2081,7 @@
#define HOMING_FEEDRATE_Z (6*60)
#endif
#if ENABLED(KNUTWURST_4MAXP2)
#if EITHER(KNUTWURST_4MAX, KNUTWURST_4MAXP2)
// Homing speeds (mm/m)
#define HOMING_FEEDRATE_XY (40*60)
#define HOMING_FEEDRATE_Z (4*60)