wp/Marlin-2-0-x-Anycubic-i3-MEGA-S
1
0
Fork 0
Code Issues 28 Pull Requests 2 Actions Packages Projects Releases 30 Wiki Activity

Rewrite printer feature toggle selection to save cpu cycles

Browse Source
This commit is contained in:
Knutwurst
2020-10-01 18:19:47 +02:00
parent 1577fff13c
commit d7ae56c292
1 changed files with 10 additions and 10 deletions
Download Patch File Download Diff File Expand all files Collapse all files

20
Marlin/Configuration.h
View File

@@ -808,7 +808,7 @@
//#define ENDSTOPPULLDOWN_ZMIN_PROBE //#define ENDSTOPPULLDOWN_ZMIN_PROBE
#endif #endif
#if ENABLED(KNUTWURST_MEGA) || ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_P) #if ANY(KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_P)
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
@@ -982,7 +982,7 @@
* Override with M201 * Override with M201
* X, Y, Z, E0 [, E1[, E2...]] * X, Y, Z, E0 [, E1[, E2...]]
*/ */
#if ENABLED(KNUTWURST_MEGA) || ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_P) #if ANY(KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_P)
#define DEFAULT_MAX_ACCELERATION { 3000, 2000, 60, 10000 } #define DEFAULT_MAX_ACCELERATION { 3000, 2000, 60, 10000 }
#endif #endif
@@ -1045,7 +1045,7 @@
* value set here, it may happen instantaneously. * value set here, it may happen instantaneously.
*/ */
#if ENABLED(KNUTWURST_MEGA) || ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_P) #if ANY(KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_P)
#define CLASSIC_JERK #define CLASSIC_JERK
#endif #endif
@@ -1055,7 +1055,7 @@
#if ENABLED(CLASSIC_JERK) #if ENABLED(CLASSIC_JERK)
#if ENABLED(KNUTWURST_MEGA) || ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_P) #if ANY(KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_P)
#define DEFAULT_XJERK 10.0 #define DEFAULT_XJERK 10.0
#define DEFAULT_YJERK 10.0 #define DEFAULT_YJERK 10.0
#define DEFAULT_ZJERK 0.4 #define DEFAULT_ZJERK 0.4
@@ -1077,7 +1077,7 @@
#endif #endif
#endif #endif
#if ENABLED(KNUTWURST_MEGA) || ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_P) #if ANY(KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_P)
#define DEFAULT_EJERK 5.0 // May be used by Linear Advance #define DEFAULT_EJERK 5.0 // May be used by Linear Advance
#endif #endif
@@ -1093,7 +1093,7 @@
* http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html * http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
*/ */
#if DISABLED(CLASSIC_JERK) #if DISABLED(CLASSIC_JERK)
#if ENABLED(KNUTWURST_MEGA) || ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_P) #if ANY(KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_P)
#define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge
#endif #endif
@@ -1378,7 +1378,7 @@
#if DISABLED(KNUTWURST_TMC) #if DISABLED(KNUTWURST_TMC)
#if ENABLED(KNUTWURST_MEGA) || ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_X) #if ANY(KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_X)
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR true // set to true for stock drivers or TMC2208 with reversed connectors #define INVERT_X_DIR true // set to true for stock drivers or TMC2208 with reversed connectors
#define INVERT_Y_DIR false // set to false for stock drivers or TMC2208 with reversed connectors #define INVERT_Y_DIR false // set to false for stock drivers or TMC2208 with reversed connectors
@@ -1426,7 +1426,7 @@
#endif #endif
#if ENABLED(KNUTWURST_TMC) #if ENABLED(KNUTWURST_TMC)
#if ENABLED(KNUTWURST_MEGA) || ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_X) #if ANY(KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_X)
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
#define INVERT_X_DIR false // set to true for stock drivers or TMC2208 with reversed connectors #define INVERT_X_DIR false // set to true for stock drivers or TMC2208 with reversed connectors
#define INVERT_Y_DIR true // set to false for stock drivers or TMC2208 with reversed connectors #define INVERT_Y_DIR true // set to false for stock drivers or TMC2208 with reversed connectors
@@ -1498,7 +1498,7 @@
#define Z_BED_HEIGHT 210 #define Z_BED_HEIGHT 210
#endif #endif
#if ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_P) #if ANY(KNUTWURST_MEGA_S, KNUTWURST_MEGA_P)
#define X_BED_SIZE 225 #define X_BED_SIZE 225
#define Y_BED_SIZE 220 #define Y_BED_SIZE 220
#define Z_BED_HEIGHT 210 #define Z_BED_HEIGHT 210
@@ -1790,7 +1790,7 @@
#define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28).
#endif #endif
#if ENABLED(KNUTWURST_MEGA) || ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_P) #if ANY(KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_P)
// Homing speeds (mm/m) // Homing speeds (mm/m)
#define HOMING_FEEDRATE_XY (50*60) #define HOMING_FEEDRATE_XY (50*60)
#define HOMING_FEEDRATE_Z (5*60) #define HOMING_FEEDRATE_Z (5*60)