wp/Marlin-2-0-x-Anycubic-i3-MEGA-S
1
0
Fork 0
Code Issues 28 Pull Requests 2 Actions Packages Projects Releases 30 Wiki Activity

update leveling implementation and pin config for Chiron

Browse Source
This commit is contained in:
Stefan Kalscheuer
2022-09-03 09:28:10 +02:00
parent 6368552ced
commit db27202614
5 changed files with 74 additions and 75 deletions
Download Patch File Download Diff File Expand all files Collapse all files

94
Marlin/src/pins/ramps/pins_RAMPS_CHIRON.h
View File

@@ -53,7 +53,7 @@
#if NONE(IS_RAMPS_SMART, IS_RAMPS_DUO, IS_RAMPS4DUE, TARGET_LPC1768)
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
// #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
#endif
@@ -170,26 +170,26 @@
#endif
//
// SPI for Max6675 or Max31855 Thermocouple
// SPI for MAX Thermocouple
//
#ifndef MAX6675_SS_PIN
#define MAX6675_SS_PIN 66 // Don't use 53 if using Display/SD card (SDSS) or 49 (SD_DETECT_PIN)
#ifndef TEMP_0_CS_PIN
#define TEMP_0_CS_PIN 66 // Don't use 53 if using Display/SD card (SDSS) or 49 (SD_DETECT_PIN)
#endif
//
// Augmentation for auto-assigning RAMPS plugs
//
#if NONE(IS_RAMPS_EEB, IS_RAMPS_EEF, IS_RAMPS_EFB, IS_RAMPS_EFF, IS_RAMPS_SF) && !PIN_EXISTS(MOSFET_D)
#if NONE(FET_ORDER_EEB, FET_ORDER_EEF, FET_ORDER_EFB, FET_ORDER_EFF, FET_ORDER_SF) && !PIN_EXISTS(MOSFET_D)
#if HOTENDS > 1
#if TEMP_SENSOR_BED
#define IS_RAMPS_EEB
#define FET_ORDER_EEB
#else
#define IS_RAMPS_EEF
#define FET_ORDER_EEF
#endif
#elif TEMP_SENSOR_BED
#define IS_RAMPS_EFB
#define FET_ORDER_EFB
#else
#define IS_RAMPS_EFF
#define FET_ORDER_EFF
#endif
#endif
@@ -211,16 +211,16 @@
#define HEATER_0_PIN RAMPS_D10_PIN
#if ENABLED(IS_RAMPS_EFB) // Hotend, Fan, Bed
#define HEATER_BED_PIN 45 //RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EEF) // Hotend, Hotend, Fan
#if ENABLED(FET_ORDER_EFB) // Hotend, Fan, Bed
#define HEATER_BED_PIN 45 // RAMPS_D8_PIN
#elif ENABLED(FET_ORDER_EEF) // Hotend, Hotend, Fan
#define HEATER_1_PIN RAMPS_D9_PIN
#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed
#elif ENABLED(FET_ORDER_EEB) // Hotend, Hotend, Bed
#define HEATER_1_PIN RAMPS_D9_PIN
#define HEATER_BED_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Fan
#elif ENABLED(FET_ORDER_EFF) // Hotend, Fan, Fan
#define FAN1_PIN RAMPS_D8_PIN
#elif DISABLED(IS_RAMPS_SF) // Not Spindle, Fan (i.e., "EFBF" or "EFBE")
#elif DISABLED(FET_ORDER_SF) // Not Spindle, Fan (i.e., "EFBF" or "EFBE")
#define HEATER_BED_PIN RAMPS_D8_PIN
#if HOTENDS == 1
#define FAN1_PIN MOSFET_D_PIN
@@ -230,11 +230,11 @@
#endif
#ifndef FAN_PIN
#if EITHER(IS_RAMPS_EFB, IS_RAMPS_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan
#if EITHER(FET_ORDER_EFB, FET_ORDER_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan
#define FAN_PIN RAMPS_D9_PIN
#elif EITHER(IS_RAMPS_EEF, IS_RAMPS_SF) // Hotend, Hotend, Fan or Spindle, Fan
#elif EITHER(FET_ORDER_EEF, FET_ORDER_SF) // Hotend, Hotend, Fan or Spindle, Fan
#define FAN_PIN RAMPS_D8_PIN
#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed
#elif ENABLED(FET_ORDER_EEB) // Hotend, Hotend, Bed
#define FAN_PIN 4 // IO pin. Buffer needed
#else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE")
#define FAN_PIN RAMPS_D9_PIN
@@ -307,17 +307,17 @@
* Hardware serial communication ports.
* If undefined software serial is used according to the pins below
*/
//#define X_HARDWARE_SERIAL Serial1
//#define X2_HARDWARE_SERIAL Serial1
//#define Y_HARDWARE_SERIAL Serial1
//#define Y2_HARDWARE_SERIAL Serial1
//#define Z_HARDWARE_SERIAL Serial1
//#define Z2_HARDWARE_SERIAL Serial1
//#define E0_HARDWARE_SERIAL Serial1
//#define E1_HARDWARE_SERIAL Serial1
//#define E2_HARDWARE_SERIAL Serial1
//#define E3_HARDWARE_SERIAL Serial1
//#define E4_HARDWARE_SERIAL Serial1
// #define X_HARDWARE_SERIAL Serial1
// #define X2_HARDWARE_SERIAL Serial1
// #define Y_HARDWARE_SERIAL Serial1
// #define Y2_HARDWARE_SERIAL Serial1
// #define Z_HARDWARE_SERIAL Serial1
// #define Z2_HARDWARE_SERIAL Serial1
// #define E0_HARDWARE_SERIAL Serial1
// #define E1_HARDWARE_SERIAL Serial1
// #define E2_HARDWARE_SERIAL Serial1
// #define E3_HARDWARE_SERIAL Serial1
// #define E4_HARDWARE_SERIAL Serial1
//
// Software serial
@@ -410,7 +410,7 @@
#ifndef E7_SERIAL_RX_PIN
#define E7_SERIAL_RX_PIN -1
#endif
#endif
#endif // if HAS_TMC_UART
//
// Průša i3 MK2 Multiplexer Support
@@ -494,18 +494,18 @@
#define BEEPER_PIN 33
#endif
#endif
#endif // if ENABLED(CR10_STOCKDISPLAY)
#if DISABLED(NEWPANEL)
// Buttons attached to a shift register
// Not wired yet
//#define SHIFT_CLK 38
//#define SHIFT_LD 42
//#define SHIFT_OUT 40
//#define SHIFT_EN 17
// #define SHIFT_CLK 38
// #define SHIFT_LD 42
// #define SHIFT_OUT 40
// #define SHIFT_EN 17
#endif
#endif
#endif // if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
//
// LCD Display input pins
@@ -610,9 +610,9 @@
// GLCD features
// Uncomment screen orientation
//#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270
// #define LCD_SCREEN_ROT_90
// #define LCD_SCREEN_ROT_180
// #define LCD_SCREEN_ROT_270
// not connected to a pin
#define LCD_BACKLIGHT_PIN -1 // 65 (MKS mini12864 can't adjust backlight by software!)
@@ -630,8 +630,8 @@
#define BTN_EN1 33
#define BTN_EN2 31
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
// #define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN 23 // Must be high or open for LCD to operate normally.
@@ -649,7 +649,7 @@
#define NEOPIXEL_PIN 25
#endif
#endif
#endif // if ENABLED(MKS_MINI_12864)
#elif ENABLED(MINIPANEL)
@@ -662,9 +662,9 @@
// GLCD features
// Uncomment screen orientation
//#define LCD_SCREEN_ROT_90
//#define LCD_SCREEN_ROT_180
//#define LCD_SCREEN_ROT_270
// #define LCD_SCREEN_ROT_90
// #define LCD_SCREEN_ROT_180
// #define LCD_SCREEN_ROT_270
#define BTN_EN1 40
#define BTN_EN2 63
@@ -681,7 +681,7 @@
// Pins only defined for RAMPS_SMART currently
#else
#else // if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
// Beeper on AUX-4
#define BEEPER_PIN 33
@@ -702,7 +702,7 @@
#define KILL_PIN 41
#endif
#endif
#endif // if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
#endif // NEWPANEL
#endif // HAS_SPI_LCD