wp/Marlin-2-0-x-Anycubic-i3-MEGA-S
1
0
Fork 0
Code Issues 28 Pull Requests 2 Actions Packages Projects Releases 30 Wiki Activity

Enable manual mesh bed leveling for Chiron.

Browse Source
This commit is contained in:
Knutwurst
2021-04-10 15:04:38 +02:00
parent e0aa7f7d96
commit ecff16c7dc
1 changed files with 7 additions and 7 deletions
Download Patch File Download Diff File Expand all files Collapse all files

14
Marlin/Configuration.h
View File

@@ -161,9 +161,9 @@
* PLEASE READ THE WARNING ABOVE! * PLEASE READ THE WARNING ABOVE!
* *
*/ */
//#if ENABLED(KNUTWURST_CHIRON) // DO NOT UNCOMMENT! USE PLATFORMIO TO BUILD THE FW FOR YOUR PRINTER! #if ENABLED(KNUTWURST_CHIRON)
//#define KNUTWURST_TFT_LEVELING //#define KNUTWURST_TFT_LEVELING
//#endif #endif
/******************************************************************************************* /*******************************************************************************************
** ** ** **
@@ -1207,7 +1207,7 @@
* or (with LCD_BED_LEVELING) the LCD controller. * or (with LCD_BED_LEVELING) the LCD controller.
*/ */
#if DISABLED(KNUTWURST_BLTOUCH) #if DISABLED(KNUTWURST_BLTOUCH)
#if DISABLED(KNUTWURST_CHIRON) #if DISABLED(KNUTWURST_TFT_LEVELING)
#define PROBE_MANUALLY #define PROBE_MANUALLY
#endif #endif
#endif #endif
@@ -1229,7 +1229,7 @@
/** /**
* Z Servo Probe, such as an endstop switch on a rotating arm. * Z Servo Probe, such as an endstop switch on a rotating arm.
*/ */
#if ENABLED(KNUTWURST_CHIRON) #if ENABLED(KNUTWURST_TFT_LEVELING)
#define Z_PROBE_SERVO_NR 0 #define Z_PROBE_SERVO_NR 0
#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles #define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
#endif #endif
@@ -1723,7 +1723,7 @@
* leveling in steps so you can manually adjust the Z height at each grid-point. * leveling in steps so you can manually adjust the Z height at each grid-point.
* With an LCD controller the process is guided step-by-step. * With an LCD controller the process is guided step-by-step.
*/ */
#if ANY(KNUTWURST_BLTOUCH, KNUTWURST_CHIRON) #if ANY(KNUTWURST_BLTOUCH, KNUTWURST_TFT_LEVELING)
//#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_3POINT
//#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_LINEAR
#define AUTO_BED_LEVELING_BILINEAR #define AUTO_BED_LEVELING_BILINEAR
@@ -1731,7 +1731,7 @@
//#define MESH_BED_LEVELING //#define MESH_BED_LEVELING
#endif #endif
#if NONE(KNUTWURST_BLTOUCH, KNUTWURST_CHIRON) #if NONE(KNUTWURST_BLTOUCH, KNUTWURST_TFT_LEVELING)
//#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_3POINT
//#define AUTO_BED_LEVELING_LINEAR //#define AUTO_BED_LEVELING_LINEAR
//#define AUTO_BED_LEVELING_BILINEAR //#define AUTO_BED_LEVELING_BILINEAR
@@ -2796,7 +2796,7 @@
* Set this manually if there are extra servos needing manual control. * Set this manually if there are extra servos needing manual control.
* Leave undefined or set to 0 to entirely disable the servo subsystem. * Leave undefined or set to 0 to entirely disable the servo subsystem.
*/ */
#if ENABLED(KNUTWURST_CHIRON) #if ENABLED(KNUTWURST_TFT_LEVELING)
#define NUM_SERVOS 1 // Servo index starts with 0 for M280 command #define NUM_SERVOS 1 // Servo index starts with 0 for M280 command
#endif #endif