wp/Marlin-2-0-x-Anycubic-i3-MEGA-S
1
0
Fork 0
Code Issues 28 Pull Requests 2 Actions Packages Projects Releases 30 Wiki Activity

TFT Pause/Resume works again, but Filament runout does not park the nozzle.

Browse Source
This commit is contained in:
Knutwurst
2022-01-22 21:01:17 +01:00
parent a09cf3034e
commit f041be8338
3 changed files with 40 additions and 29 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
Marlin/Configuration_adv.h
View File

@@ -2471,7 +2471,7 @@
// Set to 0 for manual extrusion.
// Filament can be extruded repeatedly from the Filament Change menu
// until extrusion is consistent, and to purge old filament.
#define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park.
//#define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park.
//#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused.
// Filament Unload does a Retract, Delay, and Purge first:
@@ -2480,13 +2480,13 @@
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
#define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload
#define PAUSE_PARK_NOZZLE_TIMEOUT 600 // (seconds) Time limit before the nozzle is turned off for safety.
#define PAUSE_PARK_NOZZLE_TIMEOUT 30 // (seconds) Time limit before the nozzle is turned off for safety.
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
//#define FILAMENT_CHANGE_RESUME_ON_INSERT // Automatically continue / load filament when runout sensor is triggered again.
//#define PAUSE_REHEAT_FAST_RESUME // Reduce number of waits by not prompting again post-timeout before continuing.
#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
//#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
@@ -3900,7 +3900,7 @@
*/
#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PAUSE_M76
#define HOST_PAUSE_M76
#define HOST_PROMPT_SUPPORT
//#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start
#endif

3
Marlin/src/feature/pause.cpp
View File

@@ -286,7 +286,8 @@ bool load_filament(const_float_t slow_load_length/*=0*/, const_float_t fast_load
#if EITHER(HAS_LCD_MENU, DWIN_CREALITY_LCD_ENHANCED)
ui.pause_show_message(PAUSE_MESSAGE_OPTION); // Also sets PAUSE_RESPONSE_WAIT_FOR
#else
pause_menu_response = PAUSE_RESPONSE_WAIT_FOR;
//pause_menu_response = PAUSE_RESPONSE_WAIT_FOR;
pause_menu_response = PAUSE_RESPONSE_RESUME_PRINT; // KNUTWURST
#endif
while (pause_menu_response == PAUSE_RESPONSE_WAIT_FOR) idle_no_sleep();
}

58
Marlin/src/lcd/anycubic_touchscreen.cpp
View File

@@ -353,17 +353,19 @@ void AnycubicTouchscreenClass::StartPrint(){
break;
case 1:
// regular sd pause
queue.inject_P(PSTR("M108")); // unpark nozzle
#ifdef ANYCUBIC_TFT_DEBUG
SERIAL_ECHOPGM("DEBUG: AI3M Pause State: ", ai3m_pause_state);
SERIAL_EOL();
SERIAL_ECHOLNPGM("DEBUG: M108 Resume from regular pause");
SERIAL_ECHOLNPGM("DEBUG: M108/M24 Resume from regular pause");
#endif
IsParked = false; // remove parked flag
wait_for_heatup = false;
wait_for_user = false;
starttime = millis();
card.startOrResumeFilePrinting(); // resume regularly
wait_for_heatup = false;
wait_for_user = false;
TFTstate = ANYCUBIC_TFT_STATE_SDPRINT;
ai3m_pause_state = 0;
#ifdef ANYCUBIC_TFT_DEBUG
@@ -386,12 +388,16 @@ void AnycubicTouchscreenClass::StartPrint(){
break;
case 3:
// paused by filament runout
queue.inject_P(PSTR("M24")); // unpark nozzle and resume
#ifdef ANYCUBIC_TFT_DEBUG
SERIAL_ECHOLNPGM("DEBUG: M24 Resume from Filament Runout");
SERIAL_ECHOLNPGM("DEBUG: M108/M24 Resume from Filament Runout");
#endif
IsParked = false; // clear flags
IsParked = false; // remove parked flag
card.startOrResumeFilePrinting(); // resume regularly
wait_for_heatup = false;
wait_for_user = false;
TFTstate = ANYCUBIC_TFT_STATE_SDPRINT;
ai3m_pause_state = 0;
#ifdef ANYCUBIC_TFT_DEBUG
SERIAL_ECHOLNPGM("DEBUG: Filament Pause Flag cleared");
@@ -439,8 +445,7 @@ void AnycubicTouchscreenClass::PausePrint() {
SERIAL_EOL();
SERIAL_ECHOLNPGM("DEBUG: Regular Pause");
#endif
}
else { // pause caused by filament runout
} else { // pause caused by filament runout
#ifdef ANYCUBIC_TFT_DEBUG
SERIAL_ECHOLNPGM("DEBUG: Filament Runout Pause");
#endif
@@ -478,16 +483,18 @@ void AnycubicTouchscreenClass::PausePrint() {
inline void AnycubicTouchscreenClass::StopPrint()
{
// stop print, disable heaters
wait_for_user = false;
wait_for_heatup = false;
IsParked = false;
if (card.isFileOpen) {
card.endFilePrintNow();
card.closefile();
}
queue.clear();
#ifdef ANYCUBIC_TFT_DEBUG
SERIAL_ECHOLNPGM("DEBUG: Stopped and cleared");
#endif
print_job_timer.stop();
thermalManager.disable_all_heaters();
ai3m_pause_state = 0;
@@ -502,17 +509,21 @@ inline void AnycubicTouchscreenClass::StopPrint()
}
void AnycubicTouchscreenClass::FilamentChangeResume() {
wait_for_user = false; //must be done twice, since we have a bug in marlin
wait_for_heatup = false;
// call M108 to break out of M600 pause
queue.inject_P(PSTR("M108"));
#ifdef ANYCUBIC_TFT_DEBUG
SERIAL_ECHOLNPGM("DEBUG: M108 Resume called");
#endif
wait_for_user = false;
IsParked = false; // remove parked flag
starttime = millis();
card.startOrResumeFilePrinting(); // resume regularly
wait_for_heatup = false;
// resume with proper progress state
card.startOrResumeFilePrinting();
wait_for_user = false;
TFTstate = ANYCUBIC_TFT_STATE_SDPRINT;
ai3m_pause_state = 0;
#ifdef ANYCUBIC_TFT_DEBUG
SERIAL_ECHOLNPGM("DEBUG: M108 Resume done");
#endif
@@ -539,7 +550,10 @@ void AnycubicTouchscreenClass::ReheatNozzle() {
#ifdef ANYCUBIC_TFT_DEBUG
SERIAL_ECHOLNPGM("DEBUG: Send reheat M108");
#endif
queue.inject_P(PSTR("M108"));
wait_for_heatup = false;
wait_for_user = false;
#ifdef ANYCUBIC_TFT_DEBUG
SERIAL_ECHOLNPGM("DEBUG: Resume heating");
#endif
@@ -557,10 +571,6 @@ void AnycubicTouchscreenClass::ReheatNozzle() {
SERIAL_EOL();
#endif
}
wait_for_user = false;
wait_for_heatup = false;
// set pause state to show CONTINUE button again
TFTstate = ANYCUBIC_TFT_STATE_SDPAUSE_REQ;
}