Stefan Kalscheuer
41c16006a1
fill the output buffer with blanks on DGUS2 clone displays
...
The intention behind the original logic was to fill the entire line with
blanks, so that the output buffer of the display gets "flushed". Restore
this behavior.
2022-12-21 20:15:37 +01:00
Stefan Kalscheuer
c2c950bbca
simplify file name sanitization
...
The routine copies "fileNameLen" characters from the original filename
plus one additional character or a trailing blank. This additional char
is overwritten by a terminating null-byte afterwards anyway.
Remove the redundant check and simplify the loop.
2022-12-21 09:07:05 +01:00
Stefan Kalscheuer
3a19d9ef69
use longest_filename() for SD card files instead of longFilename
...
The long filename is not always filled, so files like "test.gco" may not
be shown in the file list. Use the built-in fallback to the longest name
available to overcome that issue and print the 8.3 name if no other is
available.
2022-12-20 09:03:22 +01:00
Stefan Kalscheuer
67c7ce7b79
Merge upstream changes from Marlin 2.1.2
2022-12-19 15:31:22 +01:00
Stefan Kalscheuer
db27202614
update leveling implementation and pin config for Chiron
2022-09-12 16:18:03 +02:00
Stefan Kalscheuer
6368552ced
clean up HardwareSerial code
...
Remove unused variables, sanitize declarations and apply uncrust.
2022-09-12 16:18:02 +02:00
Stefan Kalscheuer
afee7b10c2
apply uncrust to anycubic_touchscreen
2022-09-03 09:26:38 +02:00
Stefan Kalscheuer
031c095019
remove explicit ABL inclusion from Anycubit Touchscreen code
2022-09-03 09:26:05 +02:00
Stefan Kalscheuer
986e416c7f
Merge upstream changes from Marlin 2.1.1
2022-09-03 09:23:32 +02:00
Knutwurst
7444f4bb45
Add reset to 4Max Pro routine
2022-02-21 13:06:24 +01:00
Knutwurst
c66f3559d7
Reenable Mesh after 4 point easy level.
2022-02-18 09:57:27 +01:00
Knutwurst
1183a5b51c
Fix bug, where Mesh was always applied when using 4 point easy leveling.
2022-02-18 09:53:43 +01:00
Knutwurst
2bc946edab
Fix StopPrint when used before the actual print starts.
2022-02-13 12:43:34 +01:00
Knutwurst
3afc5c0dc1
Automatically disable steppers after stopping the print.
2022-02-13 12:34:32 +01:00
Knutwurst
f03df0b280
Add MEGA_P feature toggle (just in case, the implementation is used by another printer)
2022-02-10 09:37:08 +01:00
Knutwurst
b035c464dd
Implement MEGA PRO inbuilt 4 point leveling
2022-02-10 09:25:13 +01:00
Knutwurst
ff88387916
Remove 8+3 filename crap when usind longer files on Anycubic 0.0.2 Display. It's now cut off at 26 characters but still displayed.
2022-02-04 23:36:04 +01:00
Knutwurst
b217d9fe69
Fix lockup and freeze for DGUS variants when pressing STOP while printing from SD card.
2022-02-04 19:44:38 +01:00
Knutwurst
d95fcd7673
Some minor fixes.
2022-02-03 12:14:56 +01:00
Knutwurst
e32e753ebf
Some M600 and Filament Runout Fixes.
2022-02-01 12:29:25 +01:00
Knutwurst
66eeb0d7ec
Fix Mesh Leveling not homing at start.
2022-01-23 14:45:47 +01:00
Knutwurst
f85e2ebb22
Stop/Abort now works as expected and does not kill the printer.
2022-01-23 12:39:32 +01:00
Knutwurst
47adc716b2
Pause on Filament Runout also works now
2022-01-23 12:27:01 +01:00
Knutwurst
a2efdedde4
Pause/Reheat/Resume now works as expected.
2022-01-23 11:07:04 +01:00
Knutwurst
c8ffbe769b
Fix Typo
2022-01-22 22:13:03 +01:00
Knutwurst
f041be8338
TFT Pause/Resume works again, but Filament runout does not park the nozzle.
2022-01-22 21:01:17 +01:00
Knutwurst
a09cf3034e
Some Debug cleanup
2022-01-22 18:36:16 +01:00
Knutwurst
03c4a3de09
Fix 4MAX build
2022-01-22 16:19:55 +01:00
Knutwurst
341addb39f
More Anycubic 0.0.2 TFT fixes, thanks to @etet100
2022-01-09 14:55:02 +01:00
Knutwurst
b6b2995b5e
- Fix resume from pause (M108)
...
- Use serial out from progmem for debugging
2022-01-09 14:48:21 +01:00
Knutwurst
899f35e029
Remove 4MAX Metal Configuration because the printer uses a 12864 display instead of Anycubic 0.0.2
2022-01-09 14:43:47 +01:00
Knutwurst
85fb3005e4
Change ANY to EITHER macro when only using two values
2021-11-07 11:27:45 +01:00
Knutwurst
8bf38f49a0
Adapt new setAxis implementation
2021-11-07 11:25:06 +01:00
Knutwurst
9cbf70c2ee
Fix Pid Tune Hotend on 4MAX and 4MAXP2
2021-11-05 11:07:44 +01:00
Knutwurst
9bf04b2e18
PowerOffPin set up at init.
2021-11-03 20:57:42 +01:00
Knutwurst
806737d701
Disable unused 4MAX powerdown code
2021-11-03 20:47:48 +01:00
Knutwurst
0fae7ebb09
Add auto-power-down feature to 4MAX Pro.
2021-11-03 19:25:31 +01:00
Knutwurst
b6a11d2648
Add EZLevel points for 4MAX and 4MAX Pro
2021-11-03 15:05:20 +01:00
Stefan Kalscheuer
9ffed0e031
harmonize indentation in anycubic_touchscreen sources
2021-11-02 10:28:40 +01:00
Stefan Kalscheuer
7077da3591
update code base to Marlin 2.0.9.2
2021-11-02 10:28:40 +01:00
Knutwurst
7e2409b8a0
Fix build.
2021-10-31 00:12:49 +02:00
Knutwurst
c4725d946d
Add original 4MAX Metal configuration and build profile. Also add Case Light control.
2021-10-31 00:09:41 +02:00
Knutwurst
d845160163
Allow ed temoeratures higher than 115 degrees
2021-09-30 10:24:50 +02:00
Knutwurst
04fcfa3b30
Fix Chiron Z-Offset editing via special menu
2021-09-18 21:54:20 +02:00
Knutwurst
533d44bf94
Cleanup
2021-09-17 21:38:18 +02:00
Knutwurst
ad974e176c
Fix for #197 Print Menu file list, when there were exactely 3 files or folders on the sd card. This was caused by a misinterpreted comparision between uint16_t and integer.
2021-09-17 21:28:42 +02:00
Knutwurst
85bac6b396
Increase Heatercheck timeout
2021-09-14 10:22:19 +02:00
Knutwurst
2e1c2343cb
Revert "HeaterCheck is now only displayed one single time at startup"
...
This reverts commit 8aa79ade6a
2021-09-13 22:41:58 +02:00
Knutwurst
8aa79ade6a
HeaterCheck is now only displayed one single time at startup
2021-09-13 12:11:58 +02:00
Knutwurst
4ad1429c5b
Fix Non-DGUS special menu key value pairs
2021-09-05 16:52:37 +02:00
