knutwurst
53b286c98d
[cron] Bump distribution date (2020-09-10)
2020-09-10 00:28:12 +00:00
Knutwurst
b04997f045
Re-enable Filament runout on boot.
2020-09-09 10:20:11 +02:00
Knutwurst
b2d8a9d260
Code Cleanup
2020-09-09 09:26:24 +02:00
Knutwurst
40ab3aad74
Feedrate and Acc settings for BMG Extruder
2020-09-09 08:43:22 +02:00
Knutwurst
b3edf03e71
Support for Bondtech Mini Geared (BMG) Extruders
2020-09-09 08:39:14 +02:00
knutwurst
3c54fd8469
[cron] Bump distribution date (2020-09-09)
2020-09-09 00:28:54 +00:00
Knutwurst
6a7ec5fc06
Start Mesh leveling is now in sub menu. Flow rate can be adjusted in special menu.
2020-09-08 17:55:20 +02:00
knutwurst
5ee4642956
[cron] Bump distribution date (2020-09-08)
2020-09-08 00:28:46 +00:00
knutwurst
927cd10e85
[cron] Bump distribution date (2020-09-07)
2020-09-07 00:29:12 +00:00
knutwurst
8f1bc49ed6
[cron] Bump distribution date (2020-09-06)
2020-09-06 00:29:40 +00:00
Knutwurst
40d3d09d5b
Revert T0 Sensor type from 11 to 5.
2020-09-05 13:10:04 +02:00
knutwurst
3a9fa4f8ef
[cron] Bump distribution date (2020-09-05)
2020-09-05 00:48:47 +00:00
Knutwurst
d7ab58ea88
Switch Temp Sensor from 5 to 11 which should be the correct one.
2020-09-04 20:55:50 +02:00
Knutwurst
e61cec29da
Add build environments for 1st gen Mega
2020-09-03 09:51:53 +02:00
Knutwurst
b6bdcd393b
Add support for first generation i3 Mega with only one endstop
2020-09-02 21:15:58 +02:00
Knutwurst
fc5a29b43a
First rudimentary support for MEGA PRO.
2020-08-27 16:31:54 +02:00
Knutwurst
0757a57122
Update Version to 1.1.5 for next release
2020-08-27 08:44:46 +02:00
Knutwurst
dab8b979bf
Fix issue where the BLTouch nozzle did not retract between probes.
2020-08-26 22:33:19 +02:00
Knutwurst
9140808f2d
Add Howto-Screenshot
2020-08-26 17:05:52 +02:00
Knutwurst
0f53591818
Small initialisation fix.
2020-08-26 14:56:45 +02:00
Knutwurst
f363260a49
Massive Code Cleanup and Filament Runout Sensor Pin isn't a magic number anymore.
2020-08-26 14:48:53 +02:00
Knutwurst
bd2cb8080a
Reenable T0 Sensor Message handling
2020-08-26 11:26:20 +02:00
Knutwurst
697bc6f45c
PID Tuning is now automatially saved to EEPROM.
2020-08-26 11:25:09 +02:00
Knutwurst
c7373ccc8e
More readable special menu on DGUS Clone Display
2020-08-26 09:43:46 +02:00
Knutwurst
52126609af
Fix too long version number
2020-08-25 19:56:01 +02:00
Knutwurst
aa57f4be9d
Fix for Special Menu without SD card
2020-08-25 19:39:08 +02:00
Knutwurst
e4a828f32a
Increase filament runout watch from 3 to 5 seconds.
2020-08-25 08:56:45 +02:00
Knutwurst
5c0841a139
Increase max Z Feedrate to 18 (thanks to Simon Geis)
2020-08-25 08:22:27 +02:00
Knutwurst
c65ec66cb1
Add Manual Mesh Leveling Sub-Menu.
2020-08-24 14:48:07 +02:00
Knutwurst
fb65790f4d
Update Version to 1.1.4 Release
2020-08-24 11:07:00 +02:00
Knutwurst
e53792cbce
Fix Z Feedrate on Mega X
2020-08-23 22:00:28 +02:00
Knutwurst
b8cbfd7569
- Disable DGUS Fix for Mega X to switch to the better Special Menu
...
- Bump Version to 1.1.4 Beta
- Fix Special Menu Handling when no SD Card is present
- Add Pictures for new WIKI Page
- Set Classic jerk to 0.2 since this is needed for Mesh Leveling
2020-08-23 11:40:00 +02:00
Knutwurst
2ef275c95b
More default speeds from original MEGA_X_V1.2.6 Firmware
2020-08-22 21:19:48 +02:00
Knutwurst
98852f7164
Show Special Menu even if no SD card is inserted.
2020-08-22 15:07:43 +02:00
Knutwurst
810526e377
Some minor Touchscreen fixes
2020-08-22 14:44:01 +02:00
Knutwurst
f663765c7e
Add detailed Version Info for DGUS II.
2020-08-21 23:52:11 +02:00
Knutwurst
27c074ba25
Enable Junction Deviation for MEGA X
2020-08-17 16:40:50 +02:00
Knutwurst
fb22e90d6d
Fix z height when using hotend pid autotune
2020-08-16 12:10:01 +02:00
Knutwurst
14c90915b0
Set release Date
2020-08-16 12:02:15 +02:00
Knutwurst
f078706442
- Disable Stepper after Hotend PID Tuning
...
- Bump version zu 1.1.3 Release
- Finally Fix 0.01 Steps for manual leveling
2020-08-16 12:01:30 +02:00
Knutwurst
fe734e1152
- Lower max feedrate for Z on MEGA M and S
...
- fully automatize PID tuning
- Bump Version to 1.1.3-BETA
2020-08-15 22:30:42 +02:00
Knutwurst
4d5d068a99
Disable stepper motors after BLTouch leveling is done
2020-08-14 12:49:58 +02:00
Knutwurst
a4cd712b02
JunctionDeviation Params for Mega S/X
2020-08-14 09:56:23 +02:00
Knutwurst
6ffd8dd31d
Mega X Acceleration Fixes
2020-08-14 09:29:42 +02:00
Knutwurst
083894f518
Slower homing feedrate. It war too high for the Mega S
2020-08-13 12:41:12 +02:00
Knutwurst
81ed8a1d9f
Deployment Script with subfolders for each firmware version
2020-08-13 10:08:24 +02:00
Knutwurst
f91882400b
Bump Version to 1.1.2 for next Release
2020-08-13 09:32:14 +02:00
Knutwurst
abf7f93bda
Add Distribution Date to M115 Command
2020-08-13 08:30:26 +02:00
Knutwurst
bcc3964aed
Feature: Very fast BLTouch probing
2020-08-12 22:10:23 +02:00
Knutwurst
9c59d44e9f
DGUS2 TFT Bugfix when serial error occures
2020-08-12 20:05:09 +02:00
