Stefan Kalscheuer
c2c950bbca
simplify file name sanitization
...
The routine copies "fileNameLen" characters from the original filename
plus one additional character or a trailing blank. This additional char
is overwritten by a terminating null-byte afterwards anyway.
Remove the redundant check and simplify the loop.
2022-12-21 09:07:05 +01:00
Stefan Kalscheuer
3a19d9ef69
use longest_filename() for SD card files instead of longFilename
...
The long filename is not always filled, so files like "test.gco" may not
be shown in the file list. Use the built-in fallback to the longest name
available to overcome that issue and print the 8.3 name if no other is
available.
2022-12-20 09:03:22 +01:00
Stefan Kalscheuer
db27202614
update leveling implementation and pin config for Chiron
2022-09-12 16:18:03 +02:00
Stefan Kalscheuer
afee7b10c2
apply uncrust to anycubic_touchscreen
2022-09-03 09:26:38 +02:00
Stefan Kalscheuer
031c095019
remove explicit ABL inclusion from Anycubit Touchscreen code
2022-09-03 09:26:05 +02:00
Knutwurst
7444f4bb45
Add reset to 4Max Pro routine
2022-02-21 13:06:24 +01:00
Knutwurst
c66f3559d7
Reenable Mesh after 4 point easy level.
2022-02-18 09:57:27 +01:00
Knutwurst
1183a5b51c
Fix bug, where Mesh was always applied when using 4 point easy leveling.
2022-02-18 09:53:43 +01:00
Knutwurst
2bc946edab
Fix StopPrint when used before the actual print starts.
2022-02-13 12:43:34 +01:00
Knutwurst
3afc5c0dc1
Automatically disable steppers after stopping the print.
2022-02-13 12:34:32 +01:00
Knutwurst
f03df0b280
Add MEGA_P feature toggle (just in case, the implementation is used by another printer)
2022-02-10 09:37:08 +01:00
Knutwurst
b035c464dd
Implement MEGA PRO inbuilt 4 point leveling
2022-02-10 09:25:13 +01:00
Knutwurst
ff88387916
Remove 8+3 filename crap when usind longer files on Anycubic 0.0.2 Display. It's now cut off at 26 characters but still displayed.
2022-02-04 23:36:04 +01:00
Knutwurst
b217d9fe69
Fix lockup and freeze for DGUS variants when pressing STOP while printing from SD card.
2022-02-04 19:44:38 +01:00
Knutwurst
d95fcd7673
Some minor fixes.
2022-02-03 12:14:56 +01:00
Knutwurst
e32e753ebf
Some M600 and Filament Runout Fixes.
2022-02-01 12:29:25 +01:00
Knutwurst
66eeb0d7ec
Fix Mesh Leveling not homing at start.
2022-01-23 14:45:47 +01:00
Knutwurst
f85e2ebb22
Stop/Abort now works as expected and does not kill the printer.
2022-01-23 12:39:32 +01:00
Knutwurst
47adc716b2
Pause on Filament Runout also works now
2022-01-23 12:27:01 +01:00
Knutwurst
a2efdedde4
Pause/Reheat/Resume now works as expected.
2022-01-23 11:07:04 +01:00
Knutwurst
c8ffbe769b
Fix Typo
2022-01-22 22:13:03 +01:00
Knutwurst
f041be8338
TFT Pause/Resume works again, but Filament runout does not park the nozzle.
2022-01-22 21:01:17 +01:00
Knutwurst
a09cf3034e
Some Debug cleanup
2022-01-22 18:36:16 +01:00
Knutwurst
03c4a3de09
Fix 4MAX build
2022-01-22 16:19:55 +01:00
Knutwurst
341addb39f
More Anycubic 0.0.2 TFT fixes, thanks to @etet100
2022-01-09 14:55:02 +01:00
Knutwurst
b6b2995b5e
- Fix resume from pause (M108)
...
- Use serial out from progmem for debugging
2022-01-09 14:48:21 +01:00
Knutwurst
899f35e029
Remove 4MAX Metal Configuration because the printer uses a 12864 display instead of Anycubic 0.0.2
2022-01-09 14:43:47 +01:00
Knutwurst
85fb3005e4
Change ANY to EITHER macro when only using two values
2021-11-07 11:27:45 +01:00
Knutwurst
8bf38f49a0
Adapt new setAxis implementation
2021-11-07 11:25:06 +01:00
Knutwurst
9cbf70c2ee
Fix Pid Tune Hotend on 4MAX and 4MAXP2
2021-11-05 11:07:44 +01:00
Knutwurst
9bf04b2e18
PowerOffPin set up at init.
2021-11-03 20:57:42 +01:00
Knutwurst
806737d701
Disable unused 4MAX powerdown code
2021-11-03 20:47:48 +01:00
Knutwurst
0fae7ebb09
Add auto-power-down feature to 4MAX Pro.
2021-11-03 19:25:31 +01:00
Knutwurst
b6a11d2648
Add EZLevel points for 4MAX and 4MAX Pro
2021-11-03 15:05:20 +01:00
Stefan Kalscheuer
9ffed0e031
harmonize indentation in anycubic_touchscreen sources
2021-11-02 10:28:40 +01:00
Stefan Kalscheuer
7077da3591
update code base to Marlin 2.0.9.2
2021-11-02 10:28:40 +01:00
Knutwurst
c4725d946d
Add original 4MAX Metal configuration and build profile. Also add Case Light control.
2021-10-31 00:09:41 +02:00
Knutwurst
d845160163
Allow ed temoeratures higher than 115 degrees
2021-09-30 10:24:50 +02:00
Knutwurst
04fcfa3b30
Fix Chiron Z-Offset editing via special menu
2021-09-18 21:54:20 +02:00
Knutwurst
533d44bf94
Cleanup
2021-09-17 21:38:18 +02:00
Knutwurst
ad974e176c
Fix for #197 Print Menu file list, when there were exactely 3 files or folders on the sd card. This was caused by a misinterpreted comparision between uint16_t and integer.
2021-09-17 21:28:42 +02:00
Knutwurst
85bac6b396
Increase Heatercheck timeout
2021-09-14 10:22:19 +02:00
Knutwurst
2e1c2343cb
Revert "HeaterCheck is now only displayed one single time at startup"
...
This reverts commit 8aa79ade6a
2021-09-13 22:41:58 +02:00
Knutwurst
8aa79ade6a
HeaterCheck is now only displayed one single time at startup
2021-09-13 12:11:58 +02:00
Knutwurst
1729115a07
Fix non-BLT build
2021-09-04 13:12:33 +02:00
Knutwurst
e2c1dd0b3c
Fully working Z offset adjustment
2021-09-04 13:04:54 +02:00
Knutwurst
1a8d83556a
Remove code dupication
2021-09-04 00:17:22 +02:00
Knutwurst
923693fc14
Add debugging code and read current offset to LCD.
2021-09-03 23:54:15 +02:00
Knutwurst
39deaa0fc0
Implement Z Offset editing via BLTouch submenu.
2021-09-03 20:41:14 +02:00
Knutwurst
6e74183381
If SpecialMenu is selected, the current menu item is not always deselected after clicking on reload/ok.
2021-06-28 19:11:56 +02:00
