Stefan Kalscheuer
d74a36128d
Merge upstream changes from Marlin 2.1.2.4
...
* Fix broken STEPTEST (already included)
* Update SAMD51 build deps
* Remove dead video links
* Fix comma typo
* Optimize LPC176x pin toggle
* Misc. SPI cleanup
* Overridable SUICIDE_PIN for RAMPS_CREALITY
* Assume RAMPS_CREALITY is not CR2020
* "Boards Manager"
* Prefer friendly Power Off over Auto-unalive
* Adjust pulse_phase_isr code guards
* Mount media early for POWER_LOSS_RECOVERY
* Version 2.1.2.4
2024-06-23 18:03:17 +02:00
Stefan Kalscheuer
35b6573a54
Merge upstream changes from Marlin 2.1.2.3
2024-05-29 18:50:54 +02:00
Stefan Kalscheuer
cb39247a70
revert some unintentional config changes from 2.1.2.2 merge
...
Walked through the diff and noticed some config flags that have been
disabled unintentionally. Restore them.
Fixes: 752476dc8f
2024-04-29 17:07:56 +02:00
Stefan Kalscheuer
752476dc8f
Merge upstream changes from Marlin 2.1.2.2
2024-02-13 20:40:24 +01:00
Knutwurst
e0a4e25ffa
More relaxed thermal runaway parameters for all printers especially for the print bed to allow higher temperatures.
2023-09-28 18:33:58 +02:00
Knutwurst
97c3391cd9
Revert "Disable file sorting (for testing purpose only)"
...
This reverts commit af83c12790
2023-07-17 11:06:38 +02:00
Knutwurst
af83c12790
Disable file sorting (for testing purpose only)
2023-07-15 11:55:27 +02:00
Knutwurst
b940864e18
Implement 'M73' to set print job progress, overrides Knutwurst's built-in estimate
2023-06-14 22:18:43 +02:00
Knutwurst
201a693283
Make sorting much faster and prevent it from using too much RAM.
2023-06-13 12:07:17 +02:00
Oliver Köster
ecdbf477ec
Merge pull request #462 from stklcode/marlin-2.1.2.1
...
Merge upstream changes from Marlin 2.1.2.1
2023-06-09 08:50:09 +02:00
Knutwurst
dc28578f54
Disable Steppers after one Minute
2023-06-08 18:26:53 +02:00
Knutwurst
dfc9cbe8b1
Change Chiron and 4MAX filament load length.
2023-06-07 18:55:48 +02:00
Knutwurst
dedc00fb0d
Reenable automatic filament feed on M600, because a little purge is needed to enable the continue button.
2023-06-02 19:42:13 +02:00
Knutwurst
acc3c74905
New load/unload values for chiron.
2023-06-02 19:02:36 +02:00
Knutwurst
d1f269d654
Fix build
2023-06-02 18:59:12 +02:00
Knutwurst
d4fe673b96
Add M600 config for CHIRON.
2023-06-02 18:54:52 +02:00
Knutwurst
e8d38ba955
Enable alphabetical SD card file sorting.
2023-05-31 21:19:37 +02:00
Knutwurst
1df0ee59d2
Set correct filament sensor pins for chiron in correspondig header and enable new file list implementation.
2023-05-29 20:34:08 +02:00
Knutwurst
8e34d7dc7c
Fix 4MAXP2 Build.
2023-05-29 19:27:55 +02:00
Knutwurst
7fbbbba752
Fix Typo
2023-05-29 14:20:28 +02:00
Knutwurst
2b5816037a
Add custom M600 configuration for DirectExtruder 4MAX Pro 2.0.
2023-05-29 12:35:07 +02:00
Knutwurst
bb8d41c0e1
Disable BLTouch Highspeed Mode by default (can be enabled via M401 S1)
2023-05-28 17:28:12 +02:00
Stefan Kalscheuer
f92a587638
Merge upstream changes from Marlin 2.1.2.1
2023-05-26 18:50:47 +02:00
Knutwurst
570c419165
Use toolhead/nozzle paring position when aborting the SD print, instead of G28 homing.
2023-05-24 23:06:13 +02:00
Knutwurst
7cc485ae3e
Fix host action commands conflicting with integrated filament sensor
2023-05-24 19:36:20 +02:00
Knutwurst
62fcc2ff35
Fix filament sensor, but disable host action commands.
2023-05-24 19:22:58 +02:00
Knutwurst
c01193bf40
Finally fix print/pause/resume and M600 filament change.
2023-05-24 14:42:09 +02:00
Knutwurst
a019c471d1
Code cleanup.
2023-05-23 22:18:21 +02:00
Knutwurst
c03aa9d5a4
Fix Z home position not touching the buildplate (see #396 ) by removing the 2mm HOMING_BACKOFF_POST_MM on z.
2022-12-21 08:58:53 +01:00
Stefan Kalscheuer
67c7ce7b79
Merge upstream changes from Marlin 2.1.2
2022-12-19 15:31:22 +01:00
Stefan Kalscheuer
986e416c7f
Merge upstream changes from Marlin 2.1.1
2022-09-03 09:23:32 +02:00
Stefan Kalscheuer
465f4cbf60
config: enable g-code M808 for repeat markers ( #325 )
2022-05-09 19:45:56 +02:00
Knutwurst
4985c9abf5
Only enable babystepping and probe offset change when BLTouch is enabled.
2022-02-23 10:08:45 +01:00
Knutwurst
0eaa8f902f
Combine M851 and Z babystepping
2022-02-23 10:03:44 +01:00
Knutwurst
e5271d7b2f
Optimize Extruder Feedrates and turn off fans at pause.
2022-01-27 16:08:45 +01:00
Knutwurst
f56b9f58ab
Increase nozzle park timeout to 1 minute and bump version for next release
2022-01-23 12:42:42 +01:00
Knutwurst
a2efdedde4
Pause/Reheat/Resume now works as expected.
2022-01-23 11:07:04 +01:00
Knutwurst
f041be8338
TFT Pause/Resume works again, but Filament runout does not park the nozzle.
2022-01-22 21:01:17 +01:00
Knutwurst
a7495a49c5
Cleanup unused environment variables from older build configurations
2022-01-09 15:07:10 +01:00
Stefan Kalscheuer
866675b72b
config: enable host action commands and host prompt support
...
This allows actions for pause/resume and receive a notice on
filament runout or change requests in OctoPrint.
2021-11-09 20:32:18 +01:00
Knutwurst
dd169b7cca
Reenable Linear Advance on all models which was disabled since Update to 2.0.9.2
2021-11-05 11:02:47 +01:00
Stefan Kalscheuer
a16109379e
config: define laser pins for Mega P
2021-11-02 10:53:02 +01:00
Stefan Kalscheuer
7077da3591
update code base to Marlin 2.0.9.2
2021-11-02 10:28:40 +01:00
Knutwurst
c4725d946d
Add original 4MAX Metal configuration and build profile. Also add Case Light control.
2021-10-31 00:09:41 +02:00
Knutwurst
4a58b4b093
Add full 4MAX Pro 2.0 configuration including case light. This might be buggy regadring motor directions and has to be tested!
2021-10-29 18:12:06 +02:00
Knutwurst
1ecca13347
Disable Steppers after 3 Minutes idle time.
2021-08-22 22:07:09 +02:00
Ashley Sommer
92bfd1b495
Backport meatpack feature from upstream
2021-08-20 13:45:16 +10:00
Knutwurst
28f97829c2
Disable auto stepper deactivation because it causes problems with the mesh leveling
2021-06-25 08:39:44 +02:00
Knutwurst
035538dac7
Back to special TMC/A4988 timings
2021-06-21 21:50:18 +02:00
Knutwurst
df00fdd01e
Fix Chiron Endstop Configuration and Pin mapping.
2021-06-21 12:02:00 +02:00
