wp/Marlin-2-0-x-Anycubic-i3-MEGA-S
1
0
Fork 0
Code Issues 28 Pull Requests 2 Actions Packages Projects Releases 30 Wiki Activity
890 Commits 1 Branch 37 Tags
cb39247a7036d388a254020f22f03413074f0c07
Commit Graph

91 Commits

Author SHA1 Message Date
Stefan Kalscheuer
cb39247a70 revert some unintentional config changes from 2.1.2.2 merge 
Walked through the diff and noticed some config flags that have been
disabled unintentionally. Restore them.

Fixes: 752476dc8f
 2024-04-29 17:07:56 +02:00
Stefan Kalscheuer
752476dc8f Merge upstream changes from Marlin 2.1.2.2 2024-02-13 20:40:24 +01:00
Knutwurst
e0a4e25ffa More relaxed thermal runaway parameters for all printers especially for the print bed to allow higher temperatures. 2023-09-28 18:33:58 +02:00
Knutwurst
97c3391cd9 Revert "Disable file sorting (for testing purpose only)" 
This reverts commit af83c12790.
 2023-07-17 11:06:38 +02:00
Knutwurst
af83c12790 Disable file sorting (for testing purpose only) 2023-07-15 11:55:27 +02:00
Knutwurst
b940864e18 Implement 'M73' to set print job progress, overrides Knutwurst's built-in estimate 2023-06-14 22:18:43 +02:00
Knutwurst
201a693283 Make sorting much faster and prevent it from using too much RAM. 2023-06-13 12:07:17 +02:00
Oliver Köster
ecdbf477ec Merge pull request #462 from stklcode/marlin-2.1.2.1 
Merge upstream changes from Marlin 2.1.2.1
 2023-06-09 08:50:09 +02:00
Knutwurst
dc28578f54 Disable Steppers after one Minute 2023-06-08 18:26:53 +02:00
Knutwurst
dfc9cbe8b1 Change Chiron and 4MAX filament load length. 2023-06-07 18:55:48 +02:00
Knutwurst
dedc00fb0d Reenable automatic filament feed on M600, because a little purge is needed to enable the continue button. 2023-06-02 19:42:13 +02:00
Knutwurst
acc3c74905 New load/unload values for chiron. 2023-06-02 19:02:36 +02:00
Knutwurst
d1f269d654 Fix build 2023-06-02 18:59:12 +02:00
Knutwurst
d4fe673b96 Add M600 config for CHIRON. 2023-06-02 18:54:52 +02:00
Knutwurst
e8d38ba955 Enable alphabetical SD card file sorting. 2023-05-31 21:19:37 +02:00
Knutwurst
1df0ee59d2 Set correct filament sensor pins for chiron in correspondig header and enable new file list implementation. 2023-05-29 20:34:08 +02:00
Knutwurst
8e34d7dc7c Fix 4MAXP2 Build. 2023-05-29 19:27:55 +02:00
Knutwurst
7fbbbba752 Fix Typo 2023-05-29 14:20:28 +02:00
Knutwurst
2b5816037a Add custom M600 configuration for DirectExtruder 4MAX Pro 2.0. 2023-05-29 12:35:07 +02:00
Knutwurst
bb8d41c0e1 Disable BLTouch Highspeed Mode by default (can be enabled via M401 S1) 2023-05-28 17:28:12 +02:00
Stefan Kalscheuer
f92a587638 Merge upstream changes from Marlin 2.1.2.1 2023-05-26 18:50:47 +02:00
Knutwurst
570c419165 Use toolhead/nozzle paring position when aborting the SD print, instead of G28 homing. 2023-05-24 23:06:13 +02:00
Knutwurst
7cc485ae3e Fix host action commands conflicting with integrated filament sensor 2023-05-24 19:36:20 +02:00
Knutwurst
62fcc2ff35 Fix filament sensor, but disable host action commands. 2023-05-24 19:22:58 +02:00
Knutwurst
c01193bf40 Finally fix print/pause/resume and M600 filament change. 2023-05-24 14:42:09 +02:00
Knutwurst
a019c471d1 Code cleanup. 2023-05-23 22:18:21 +02:00
Knutwurst
c03aa9d5a4 Fix Z home position not touching the buildplate (see #396) by removing the 2mm HOMING_BACKOFF_POST_MM on z. 2022-12-21 08:58:53 +01:00
Stefan Kalscheuer
67c7ce7b79 Merge upstream changes from Marlin 2.1.2 2022-12-19 15:31:22 +01:00
Stefan Kalscheuer
986e416c7f Merge upstream changes from Marlin 2.1.1 2022-09-03 09:23:32 +02:00
Stefan Kalscheuer
465f4cbf60 config: enable g-code M808 for repeat markers (#325) 2022-05-09 19:45:56 +02:00
Knutwurst
4985c9abf5 Only enable babystepping and probe offset change when BLTouch is enabled. 2022-02-23 10:08:45 +01:00
Knutwurst
0eaa8f902f Combine M851 and Z babystepping 2022-02-23 10:03:44 +01:00
Knutwurst
e5271d7b2f Optimize Extruder Feedrates and turn off fans at pause. 2022-01-27 16:08:45 +01:00
Knutwurst
f56b9f58ab Increase nozzle park timeout to 1 minute and bump version for next release 2022-01-23 12:42:42 +01:00
Knutwurst
a2efdedde4 Pause/Reheat/Resume now works as expected. 2022-01-23 11:07:04 +01:00
Knutwurst
f041be8338 TFT Pause/Resume works again, but Filament runout does not park the nozzle. 2022-01-22 21:01:17 +01:00
Knutwurst
a7495a49c5 Cleanup unused environment variables from older build configurations 2022-01-09 15:07:10 +01:00
Stefan Kalscheuer
866675b72b config: enable host action commands and host prompt support 
This allows actions for pause/resume and receive a notice on
filament runout or change requests in OctoPrint.
 2021-11-09 20:32:18 +01:00
Knutwurst
dd169b7cca Reenable Linear Advance on all models which was disabled since Update to 2.0.9.2 2021-11-05 11:02:47 +01:00
Stefan Kalscheuer
a16109379e config: define laser pins for Mega P 2021-11-02 10:53:02 +01:00
Stefan Kalscheuer
7077da3591 update code base to Marlin 2.0.9.2 2021-11-02 10:28:40 +01:00
Knutwurst
c4725d946d Add original 4MAX Metal configuration and build profile. Also add Case Light control. 2021-10-31 00:09:41 +02:00
Knutwurst
4a58b4b093 Add full 4MAX Pro 2.0 configuration including case light. This might be buggy regadring motor directions and has to be tested! 2021-10-29 18:12:06 +02:00
Knutwurst
1ecca13347 Disable Steppers after 3 Minutes idle time. 2021-08-22 22:07:09 +02:00
Ashley Sommer
92bfd1b495 Backport meatpack feature from upstream 2021-08-20 13:45:16 +10:00
Knutwurst
28f97829c2 Disable auto stepper deactivation because it causes problems with the mesh leveling 2021-06-25 08:39:44 +02:00
Knutwurst
035538dac7 Back to special TMC/A4988 timings 2021-06-21 21:50:18 +02:00
Knutwurst
df00fdd01e Fix Chiron Endstop Configuration and Pin mapping. 2021-06-21 12:02:00 +02:00
Knutwurst
f358634e0a Fix for Mega Pro whining noise 2021-06-18 11:11:12 +02:00
Knutwurst
2bf9fc57cc Update float conversion 2021-06-12 16:15:47 +02:00