Knutwurst
9140808f2d
Add Howto-Screenshot
2020-08-26 17:05:52 +02:00
Knutwurst
0f53591818
Small initialisation fix.
2020-08-26 14:56:45 +02:00
Knutwurst
f363260a49
Massive Code Cleanup and Filament Runout Sensor Pin isn't a magic number anymore.
2020-08-26 14:48:53 +02:00
Knutwurst
bd2cb8080a
Reenable T0 Sensor Message handling
2020-08-26 11:26:20 +02:00
Knutwurst
697bc6f45c
PID Tuning is now automatially saved to EEPROM.
2020-08-26 11:25:09 +02:00
Knutwurst
c7373ccc8e
More readable special menu on DGUS Clone Display
2020-08-26 09:43:46 +02:00
Knutwurst
52126609af
Fix too long version number
2020-08-25 19:56:01 +02:00
Knutwurst
aa57f4be9d
Fix for Special Menu without SD card
2020-08-25 19:39:08 +02:00
Knutwurst
e4a828f32a
Increase filament runout watch from 3 to 5 seconds.
2020-08-25 08:56:45 +02:00
Knutwurst
5c0841a139
Increase max Z Feedrate to 18 (thanks to Simon Geis)
2020-08-25 08:22:27 +02:00
Knutwurst
c65ec66cb1
Add Manual Mesh Leveling Sub-Menu.
2020-08-24 14:48:07 +02:00
Knutwurst
fb65790f4d
Update Version to 1.1.4 Release
2020-08-24 11:07:00 +02:00
Knutwurst
e53792cbce
Fix Z Feedrate on Mega X
2020-08-23 22:00:28 +02:00
Knutwurst
b8cbfd7569
- Disable DGUS Fix for Mega X to switch to the better Special Menu
...
- Bump Version to 1.1.4 Beta
- Fix Special Menu Handling when no SD Card is present
- Add Pictures for new WIKI Page
- Set Classic jerk to 0.2 since this is needed for Mesh Leveling
2020-08-23 11:40:00 +02:00
Knutwurst
2ef275c95b
More default speeds from original MEGA_X_V1.2.6 Firmware
2020-08-22 21:19:48 +02:00
Knutwurst
98852f7164
Show Special Menu even if no SD card is inserted.
2020-08-22 15:07:43 +02:00
Knutwurst
810526e377
Some minor Touchscreen fixes
2020-08-22 14:44:01 +02:00
Knutwurst
f663765c7e
Add detailed Version Info for DGUS II.
2020-08-21 23:52:11 +02:00
Knutwurst
27c074ba25
Enable Junction Deviation for MEGA X
2020-08-17 16:40:50 +02:00
Knutwurst
fb22e90d6d
Fix z height when using hotend pid autotune
2020-08-16 12:10:01 +02:00
Knutwurst
14c90915b0
Set release Date
2020-08-16 12:02:15 +02:00
Knutwurst
f078706442
- Disable Stepper after Hotend PID Tuning
...
- Bump version zu 1.1.3 Release
- Finally Fix 0.01 Steps for manual leveling
2020-08-16 12:01:30 +02:00
Knutwurst
fe734e1152
- Lower max feedrate for Z on MEGA M and S
...
- fully automatize PID tuning
- Bump Version to 1.1.3-BETA
2020-08-15 22:30:42 +02:00
Knutwurst
4d5d068a99
Disable stepper motors after BLTouch leveling is done
2020-08-14 12:49:58 +02:00
Knutwurst
a4cd712b02
JunctionDeviation Params for Mega S/X
2020-08-14 09:56:23 +02:00
Knutwurst
6ffd8dd31d
Mega X Acceleration Fixes
2020-08-14 09:29:42 +02:00
Knutwurst
083894f518
Slower homing feedrate. It war too high for the Mega S
2020-08-13 12:41:12 +02:00
Knutwurst
81ed8a1d9f
Deployment Script with subfolders for each firmware version
2020-08-13 10:08:24 +02:00
Knutwurst
f91882400b
Bump Version to 1.1.2 for next Release
2020-08-13 09:32:14 +02:00
Knutwurst
abf7f93bda
Add Distribution Date to M115 Command
2020-08-13 08:30:26 +02:00
Knutwurst
bcc3964aed
Feature: Very fast BLTouch probing
2020-08-12 22:10:23 +02:00
Knutwurst
9c59d44e9f
DGUS2 TFT Bugfix when serial error occures
2020-08-12 20:05:09 +02:00
Knutwurst
e08673ac8d
Bugfix: Hotend Fan did not start up when starting PID tuning.
2020-08-12 16:22:55 +02:00
Knutwurst
8d8d46a2b8
Add more information for developers
2020-08-11 06:50:24 +02:00
Knutwurst
101fd49a1e
Implement multi environment handling and deployment for all configurations.
2020-08-10 13:36:26 +02:00
Knutwurst
25364c7f2f
More convinient BLTouch leveling with auto saving and homing.
2020-08-09 15:51:44 +02:00
Knutwurst
53b0ac3c3a
Add userdefines for touchscreen preheat functions
2020-08-07 20:01:55 +02:00
Knutwurst
0ce6fff5d2
Bugfix: Endstops where mixed up when Mega S is selected. Thanks to "maximych" from thingiverse ;)
2020-08-07 15:36:44 +02:00
Knutwurst
afdb93e0f6
Cleanup unused stepper driver definitions.
2020-08-07 00:03:35 +02:00
Knutwurst
c9c1dffaff
Better short filenames for special menu on old TFT to ensuree the firmware is not used on DGUS2 accedentally.
2020-08-06 14:46:50 +02:00
Knutwurst
13c2400089
Add full Anycubic MEGA X support, which can be enabled in the configuration.h.
2020-08-05 11:32:45 +02:00
Knutwurst
e6fa28456c
New BLTouch offsets as default.
2020-07-31 17:27:27 +02:00
Knutwurst
45816ee091
Bugfix #7 Revert step handling for mesh leveling.
2020-07-27 19:26:28 +02:00
Knutwurst
a709457baa
Cleanup unused anycubic related code
2020-07-26 22:29:18 +02:00
Knutwurst
a7094a923d
Bump version to 1.1.0 for next release
2020-07-26 20:28:33 +02:00
Knutwurst
32d498e26c
Bugfix: File is selectable, but the print can not start when using the print button.
2020-07-26 20:22:00 +02:00
Knutwurst
790c5191c8
Fix typo
2020-07-26 16:25:37 +02:00
Knutwurst
813166d705
Disable tft serial debug level by default
2020-07-26 16:19:30 +02:00
Knutwurst
36e2e5be91
Add feature switch for new DGUS TFT in master firmware
2020-07-26 16:16:10 +02:00
Knutwurst
d70a585be8
Add debug define
2020-07-26 13:19:59 +02:00
