Update README.md

- Bump version zu 1.1.3 Release
- Finally Fix 0.01 Steps for manual leveling

Marlin/Configuration.h

@@ -915,11 +915,11 @@
  *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #if ENABLED(KNUTWURST_MEGA)
-    #define DEFAULT_MAX_FEEDRATE          { 500, 500, 20, 60 }
+    #define DEFAULT_MAX_FEEDRATE          { 500, 500, 8, 60 }
 #endif
 
 #if ENABLED(KNUTWURST_MEGA_S)
-    #define DEFAULT_MAX_FEEDRATE          { 500, 500, 20, 30 }
+    #define DEFAULT_MAX_FEEDRATE          { 500, 500, 8, 30 }
 #endif
 
 #if ENABLED(KNUTWURST_MEGA_X)
@@ -939,7 +939,16 @@
  * Override with M201
  *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
+#if EITHER(KNUTWURST_MEGA, KNUTWURST_MEGA_S)
     #define DEFAULT_MAX_ACCELERATION      { 3000, 2000,  60, 10000 }
+#endif
+
+#if ENABLED(KNUTWURST_MEGA_X)
+    #define DEFAULT_MAX_ACCELERATION      { 400, 400, 60, 10000 }
+#endif
+
+
+
 
 //#define LIMITED_MAX_ACCEL_EDITING     // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
 #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
@@ -982,10 +991,31 @@
  * value set here, it may happen instantaneously.
  */
 //#define CLASSIC_JERK
+
+// I Know.. it's useless to put it here ;)
+#if EITHER(KNUTWURST_MEGA, KNUTWURST_MEGA_S)
+    //#define CLASSIC_JERK
+#endif
+
+#if ENABLED(KNUTWURST_MEGA_X)
+    #define CLASSIC_JERK
+#endif
+
 #if ENABLED(CLASSIC_JERK)
+
+#if EITHER(KNUTWURST_MEGA, KNUTWURST_MEGA_S)
     #define DEFAULT_XJERK  10.0
     #define DEFAULT_YJERK  10.0
     #define DEFAULT_ZJERK  0.4
+#endif
+
+#if ENABLED(KNUTWURST_MEGA_X)
+    #define DEFAULT_XJERK  4.0
+    #define DEFAULT_YJERK  4.0
+    #define DEFAULT_ZJERK  0.15
+#endif
+
+
 
   //#define TRAVEL_EXTRA_XYJERK 0.0     // Additional jerk allowance for all travel moves
 
@@ -995,7 +1025,13 @@
   #endif
 #endif
 
+#if EITHER(KNUTWURST_MEGA, KNUTWURST_MEGA_S)
     #define DEFAULT_EJERK    5.0  // May be used by Linear Advance
+#endif
+
+#if ENABLED(KNUTWURST_MEGA_X)
+    #define DEFAULT_EJERK    8.0  // May be used by Linear Advance
+#endif
 
 /**
  * Junction Deviation Factor
@@ -1005,9 +1041,15 @@
  *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
  */
 #if DISABLED(CLASSIC_JERK)
+    #if EITHER(KNUTWURST_MEGA, KNUTWURST_MEGA_S)
         #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge
     #endif
 
+    #if ENABLED(KNUTWURST_MEGA_X)
+        #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge
+    #endif
+#endif
+
 /**
  * S-Curve Acceleration
  *
@@ -1634,7 +1676,7 @@
 
 // Homing speeds (mm/m)
 #define HOMING_FEEDRATE_XY (50*60)
-#define HOMING_FEEDRATE_Z  (10*60)
+#define HOMING_FEEDRATE_Z  (5*60)
 
 // Validate that endstops are triggered on homing moves
 #define VALIDATE_HOMING_ENDSTOPS

Marlin/src/inc/Version.h

@@ -41,11 +41,11 @@
  * here we define this default string as the date where the latest release
  * version was tagged.
  */
- #define CUSTOM_BUILD_VERSION "1.1.2"
+ #define CUSTOM_BUILD_VERSION "1.1.3"
 
 #ifndef STRING_DISTRIBUTION_DATE
   //#define STRING_DISTRIBUTION_DATE "2020-07-09"
-  #define STRING_DISTRIBUTION_DATE "2020-08-13"
+  #define STRING_DISTRIBUTION_DATE "2020-08-16"
 #endif
 
 /**

Marlin/src/lcd/anycubic_touchscreen.cpp

@@ -447,14 +447,21 @@ void AnycubicTouchscreenClass::HandleSpecialMenu()
   || (strcasestr(currentTouchscreenSelection, SM_PID_HOTEND_S) != NULL))
   {
     SERIAL_ECHOLNPGM("Special Menu: PID Tune Hotend");
-    queue.inject_P(PSTR("M106 S204\nG4 P500\nM303 E0 S215 C15 U1"));
-    
+    queue.inject_P(PSTR("G28\nG90\nG1 Z20\nG1 X100 Y100 F4000\nG1 Z5\nM106 S172\nG4 P500\nM303 E0 S215 C15 U1\nG4 P500\nM107\nG28\nG1 Z10\nM84"));
+    buzzer.tone(200, 1108);
+    buzzer.tone(200, 1661);
+    buzzer.tone(200, 1108);
+    buzzer.tone(600, 1661);
   }
   else if ((strcasestr(currentTouchscreenSelection, SM_PID_BED_L) != NULL)
   || (strcasestr(currentTouchscreenSelection, SM_PID_BED_S) != NULL))
   {
     SERIAL_ECHOLNPGM("Special Menu: PID Tune Ultrabase");
     queue.inject_P(PSTR("M303 E-1 S60 C6 U1"));
+    buzzer.tone(200, 1108);
+    buzzer.tone(200, 1661);
+    buzzer.tone(200, 1108);
+    buzzer.tone(600, 1661);
   }
   else if ((strcasestr(currentTouchscreenSelection, SM_SAVE_EEPROM_L) != NULL)
   || (strcasestr(currentTouchscreenSelection, SM_SAVE_EEPROM_S) != NULL))
@@ -520,17 +527,15 @@ void AnycubicTouchscreenClass::HandleSpecialMenu()
   || (strcasestr(currentTouchscreenSelection, SM_Z_UP_001_S) != NULL))
   {
     SERIAL_ECHOLNPGM("Special Menu: Z Up 0.01");
-    queue.inject_P(PSTR("G91\nG1 Z+0.01\nG90"));
     //queue.inject_P(PSTR("G91\nG1 Z+0.01\nG90"));
-    //queue.inject_P(PSTR("G91\nG1 Z-0.02\nG90"));
+    queue.inject_P(PSTR("G91\nG1 Z+0.03\nG4 P250\nG1 Z-0.02\nG90"));
   }
   else if ((strcasestr(currentTouchscreenSelection, SM_Z_DN_001_L) != NULL)
-  || (strcasestr(currentTouchscreenSelection, SM_Z_DN_001_L) != NULL))
+  || (strcasestr(currentTouchscreenSelection, SM_Z_DN_001_S) != NULL))
   {
     SERIAL_ECHOLNPGM("Special Menu: Z Down 0.01");
-    queue.inject_P(PSTR("G91\nG1 Z-0.01\nG90"));
-    //queue.inject_P(PSTR("G91\nG1 Z+0.02\nG90"));
-    //queue.inject_P(PSTR("G91\nG1 Z-0.03\nG90"));
+    //queue.inject_P(PSTR("G91\nG1 Z-0.01\nG90"));
+    queue.inject_P(PSTR("G91\nG1 Z+0.02\nG4 P250\nG1 Z-0.03\nG90"));
   }
 #endif
 
@@ -539,7 +544,7 @@ void AnycubicTouchscreenClass::HandleSpecialMenu()
   || (strcasestr(currentTouchscreenSelection, SM_BLTOUCH_S) != NULL))
   {
     SERIAL_ECHOLNPGM("Special Menu: BLTouch Leveling");
-    queue.inject_P(PSTR("G28\nG29\nM500\nG90\nG1 Z30 F4000\nG1 X0 F4000\nG91"));
+    queue.inject_P(PSTR("G28\nG29\nM500\nG90\nG1 Z30 F4000\nG1 X0 F4000\nG91\nM84"));
   }
 #endif
 

README.md

@@ -53,6 +53,7 @@
  * Wiederaufnahme des Drucks nach Stromausfall (WiP)
  * Druckbettgröße erweitert auf 220 x 225 x 210 mm
  * Automatischer 'Slowdown', falls Daten nicht schnell genug fließen
+ * Vollautomatisches Hotend und Ultrabase PID Tuning
 
 
 ## Besser im Vergleich zu anderen Firmwares (Bugfixes):
@@ -193,8 +194,8 @@ Für (fast) jede Kombination gibt es eine passende Firmware im Download-Bereich.
  * Mesh bed calibration / Auto calibration with BLTouch [(see installation Manual)](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/BLTouch-Installation-(english))
  * S-curve acceleration
  * "Juction Deviation" instead of the classic "Jerk"
- * "Linear Pressure Control v1.5" enabled (can be configured with M900)
- * Baby stepping during printing
+ * "Linear Pressure Control v1.5" activated (can be configured with M900)
+ * Baby stepping during the printing process
  * Bilinear Bed Leveling (BBL)
  * Manual editing of the measuring points
  * Full Anycubic touchscreen support
@@ -202,12 +203,11 @@ Für (fast) jede Kombination gibt es eine passende Firmware im Download-Bereich.
  * Part cooling fan now runs at 100% instead of 70%
  * Pause & filament change function
  * Automatic EEPROM initialization
- * Filament Runout Sensor can be temporarily deactivated in the menu
- * Power outage support
- * Print bed size enlarged to 220 x 225 x 210 mm
- * Automatic slowdown in if the data is not received fast enough
- * You don't have to do a basic configuration via GCODE.
- * You do not have to perform a factory reset
+ * Filament runout sensor can be temporarily deactivated in the menu
+ * Resumption of printing after a power failure (WiP)
+ * Print bed size expanded to 220 x 225 x 210 mm
+ * Automatic 'slowdown' if data does not flow fast enough
+ * Fully automatic hotend and ultrabase PID tuning
 
 ### What's better in coparison to other firmwares (bug fixes):
  * Tidy special menu

deploy_firmware_files.sh

@@ -4,14 +4,14 @@ VERSION_FILE="/Users/OKoester/Documents/Arduino/Marlin-2-0-x-Anycubic-i3-MEGA-S-
 FIRMWARE_FOLDER="/Users/OKoester/Documents/Arduino/Marlin-2-0-x-Anycubic-i3-MEGA-S-Master/.pio/build/"
 OUTPUT_FOLDER="/Users/OKoester/Desktop/i3_FIRMWARE"
 
-if [ -d "$OUTPUT_FOLDER" ]; then
-    echo "$OUTPUT_FOLDER already exists."
-else 
-    mkdir $OUTPUT_FOLDER
-fi
-
 CUSTOM_BUILD_VERSION=$(egrep -o "([0-9]{1,}\.)+[0-9]{1,}" $VERSION_FILE -m2 | tail -n1)
 
+if [ -d "$$OUTPUT_FOLDER/v$CUSTOM_BUILD_VERSION" ]; then
+    echo "$$OUTPUT_FOLDER/$CUSTOM_BUILD_VERSION already exists."
+else 
+    mkdir $OUTPUT_FOLDER/$CUSTOM_BUILD_VERSION
+fi
+
 echo "Knutwurst's Mega Firmware Version: $CUSTOM_BUILD_VERSION"
 
 cd $FIRMWARE_FOLDER
@@ -19,5 +19,5 @@ for dir in $FIRMWARE_FOLDER/*/
 do
     dir=${dir%*/}
     echo ${dir##*/}
-    cp ${dir##*/}/firmware.hex /$OUTPUT_FOLDER/${dir##*/}_v$CUSTOM_BUILD_VERSION.hex
+    cp ${dir##*/}/firmware.hex /$OUTPUT_FOLDER/$CUSTOM_BUILD_VERSION/${dir##*/}_v$CUSTOM_BUILD_VERSION.hex
 done