Update Version to 1.1.4 Release

- Bump Version to 1.1.4 Beta
- Fix Special Menu Handling when no SD Card is present
- Add Pictures for new WIKI Page
- Set Classic jerk to 0.2 since this is needed for Mesh Leveling

Marlin/Configuration.h

@@ -915,15 +915,15 @@
  *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
 #if ENABLED(KNUTWURST_MEGA)
-    #define DEFAULT_MAX_FEEDRATE          { 500, 500, 20, 60 }
+    #define DEFAULT_MAX_FEEDRATE          { 500, 500, 8, 60 }
 #endif
 
 #if ENABLED(KNUTWURST_MEGA_S)
-    #define DEFAULT_MAX_FEEDRATE          { 500, 500, 20, 30 }
+    #define DEFAULT_MAX_FEEDRATE          { 500, 500, 8, 30 }
 #endif
 
 #if ENABLED(KNUTWURST_MEGA_X)
-    #define DEFAULT_MAX_FEEDRATE            { 120, 120, 20, 80 }
+    #define DEFAULT_MAX_FEEDRATE            { 120, 120, 8, 80 } // { 120, 120, 20, 80 }
 #endif
 
 
@@ -939,7 +939,16 @@
  * Override with M201
  *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
+#if EITHER(KNUTWURST_MEGA, KNUTWURST_MEGA_S)
     #define DEFAULT_MAX_ACCELERATION      { 3000, 2000,  60, 10000 }
+#endif
+
+#if ENABLED(KNUTWURST_MEGA_X)
+    #define DEFAULT_MAX_ACCELERATION      { 400, 400, 60, 10000 }
+#endif
+
+
+
 
 //#define LIMITED_MAX_ACCEL_EDITING     // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
 #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
@@ -982,10 +991,31 @@
  * value set here, it may happen instantaneously.
  */
 //#define CLASSIC_JERK
+
+// I Know.. it's useless to put it here ;)
+#if EITHER(KNUTWURST_MEGA, KNUTWURST_MEGA_S)
+    //#define CLASSIC_JERK
+#endif
+
+#if ENABLED(KNUTWURST_MEGA_X)
+    //#define CLASSIC_JERK
+#endif
+
 #if ENABLED(CLASSIC_JERK)
+
+#if EITHER(KNUTWURST_MEGA, KNUTWURST_MEGA_S)
     #define DEFAULT_XJERK  10.0
     #define DEFAULT_YJERK  10.0
     #define DEFAULT_ZJERK  0.4
+#endif
+
+#if ENABLED(KNUTWURST_MEGA_X)
+    #define DEFAULT_XJERK  4.0
+    #define DEFAULT_YJERK  4.0
+    #define DEFAULT_ZJERK  0.2
+#endif
+
+
 
   //#define TRAVEL_EXTRA_XYJERK 0.0     // Additional jerk allowance for all travel moves
 
@@ -995,7 +1025,13 @@
   #endif
 #endif
 
+#if EITHER(KNUTWURST_MEGA, KNUTWURST_MEGA_S)
     #define DEFAULT_EJERK    5.0  // May be used by Linear Advance
+#endif
+
+#if ENABLED(KNUTWURST_MEGA_X)
+    #define DEFAULT_EJERK    8.0  // May be used by Linear Advance
+#endif
 
 /**
  * Junction Deviation Factor
@@ -1005,9 +1041,15 @@
  *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
  */
 #if DISABLED(CLASSIC_JERK)
+    #if EITHER(KNUTWURST_MEGA, KNUTWURST_MEGA_S)
         #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge
     #endif
 
+    #if ENABLED(KNUTWURST_MEGA_X)
+        #define JUNCTION_DEVIATION_MM 0.16 // (mm) Distance from real junction edge
+    #endif
+#endif
+
 /**
  * S-Curve Acceleration
  *
@@ -1632,9 +1674,18 @@
   #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2)    // Y point for Z homing when homing all axes (G28).
 #endif
 
+#if EITHER(KNUTWURST_MEGA, KNUTWURST_MEGA_S)
     // Homing speeds (mm/m)
     #define HOMING_FEEDRATE_XY (50*60)
-#define HOMING_FEEDRATE_Z  (10*60)
+    #define HOMING_FEEDRATE_Z  (5*60)
+#endif
+
+#if ENABLED(KNUTWURST_MEGA_X)
+    // Homing speeds (mm/m)
+    #define HOMING_FEEDRATE_XY (40*60)
+    #define HOMING_FEEDRATE_Z  (6*60)
+#endif
+
 
 // Validate that endstops are triggered on homing moves
 #define VALIDATE_HOMING_ENDSTOPS

Marlin/src/inc/Version.h

@@ -41,11 +41,11 @@
  * here we define this default string as the date where the latest release
  * version was tagged.
  */
- #define CUSTOM_BUILD_VERSION "1.1.2"
+ #define CUSTOM_BUILD_VERSION "1.1.4"
 
 #ifndef STRING_DISTRIBUTION_DATE
   //#define STRING_DISTRIBUTION_DATE "2020-07-09"
-  #define STRING_DISTRIBUTION_DATE "2020-08-13"
+  #define STRING_DISTRIBUTION_DATE "2020-08-24"
 #endif
 
 /**

Marlin/src/lcd/anycubic_touchscreen.cpp

@@ -447,14 +447,21 @@ void AnycubicTouchscreenClass::HandleSpecialMenu()
   || (strcasestr(currentTouchscreenSelection, SM_PID_HOTEND_S) != NULL))
   {
     SERIAL_ECHOLNPGM("Special Menu: PID Tune Hotend");
-    queue.inject_P(PSTR("M106 S204\nG4 P500\nM303 E0 S215 C15 U1"));
+    queue.inject_P(PSTR("G28\nG90\nG1 Z20\nG1 X110 Y110 F4000\nG1 Z5\nM106 S172\nG4 P500\nM303 E0 S215 C15 U1\nG4 P500\nM107\nG28\nG1 Z10\nM84"));
-    
+    buzzer.tone(200, 1108);
+    buzzer.tone(200, 1661);
+    buzzer.tone(200, 1108);
+    buzzer.tone(600, 1661);
   }
   else if ((strcasestr(currentTouchscreenSelection, SM_PID_BED_L) != NULL)
   || (strcasestr(currentTouchscreenSelection, SM_PID_BED_S) != NULL))
   {
     SERIAL_ECHOLNPGM("Special Menu: PID Tune Ultrabase");
     queue.inject_P(PSTR("M303 E-1 S60 C6 U1"));
+    buzzer.tone(200, 1108);
+    buzzer.tone(200, 1661);
+    buzzer.tone(200, 1108);
+    buzzer.tone(600, 1661);
   }
   else if ((strcasestr(currentTouchscreenSelection, SM_SAVE_EEPROM_L) != NULL)
   || (strcasestr(currentTouchscreenSelection, SM_SAVE_EEPROM_S) != NULL))
@@ -520,17 +527,15 @@ void AnycubicTouchscreenClass::HandleSpecialMenu()
   || (strcasestr(currentTouchscreenSelection, SM_Z_UP_001_S) != NULL))
   {
     SERIAL_ECHOLNPGM("Special Menu: Z Up 0.01");
-    queue.inject_P(PSTR("G91\nG1 Z+0.01\nG90"));
     //queue.inject_P(PSTR("G91\nG1 Z+0.01\nG90"));
-    //queue.inject_P(PSTR("G91\nG1 Z-0.02\nG90"));
+    queue.inject_P(PSTR("G91\nG1 Z+0.03\nG4 P250\nG1 Z-0.02\nG90"));
   }
   else if ((strcasestr(currentTouchscreenSelection, SM_Z_DN_001_L) != NULL)
-  || (strcasestr(currentTouchscreenSelection, SM_Z_DN_001_L) != NULL))
+  || (strcasestr(currentTouchscreenSelection, SM_Z_DN_001_S) != NULL))
   {
     SERIAL_ECHOLNPGM("Special Menu: Z Down 0.01");
-    queue.inject_P(PSTR("G91\nG1 Z-0.01\nG90"));
+    //queue.inject_P(PSTR("G91\nG1 Z-0.01\nG90"));
-    //queue.inject_P(PSTR("G91\nG1 Z+0.02\nG90"));
+    queue.inject_P(PSTR("G91\nG1 Z+0.02\nG4 P250\nG1 Z-0.03\nG90"));
-    //queue.inject_P(PSTR("G91\nG1 Z-0.03\nG90"));
   }
 #endif
 
@@ -539,7 +544,7 @@ void AnycubicTouchscreenClass::HandleSpecialMenu()
   || (strcasestr(currentTouchscreenSelection, SM_BLTOUCH_S) != NULL))
   {
     SERIAL_ECHOLNPGM("Special Menu: BLTouch Leveling");
-    queue.inject_P(PSTR("G28\nG29\nM500\nG90\nG1 Z30 F4000\nG1 X0 F4000\nG91"));
+    queue.inject_P(PSTR("G28\nG29\nM500\nG90\nG1 Z30 F4000\nG1 X0 F4000\nG91\nM84"));
   }
 #endif
 
@@ -726,8 +731,8 @@ void AnycubicTouchscreenClass::PrintList()
         
         // Cut off too long filenames.
         // They don't fit on the screen anyways.
-        if(fileNameLen > MAX_PRINTABLE_FILENAME_LEN)
+        //if(fileNameLen > MAX_PRINTABLE_FILENAME_LEN)
-          fileNameLen = MAX_PRINTABLE_FILENAME_LEN;
+        //  fileNameLen = MAX_PRINTABLE_FILENAME_LEN;
         
         char outputString[fileNameLen];
 
@@ -785,7 +790,8 @@ void AnycubicTouchscreenClass::PrintList()
 #endif
   else
   {
-    // Do nothing?
+    HARDWARE_SERIAL_PROTOCOLLNPGM(SM_SPECIAL_MENU_S);
+    HARDWARE_SERIAL_PROTOCOLLNPGM(SM_SPECIAL_MENU_L);
   }
 }
 
@@ -1175,7 +1181,7 @@ void AnycubicTouchscreenClass::GetCommandFromTFT()
             }
             else
             {
-              HARDWARE_SERIAL_PROTOCOLPGM("J02");
+              HARDWARE_SERIAL_PROTOCOLPGM("J02");  // J02 SD Card initilized
             }
           }
           else
@@ -1211,11 +1217,10 @@ void AnycubicTouchscreenClass::GetCommandFromTFT()
           currentTouchscreenSelection[0] = 0;
           if (!IS_SD_INSERTED())
           {
-            HARDWARE_SERIAL_PROTOCOLPGM("J02");
+            HARDWARE_SERIAL_PROTOCOLPGM("J02");  // J02 SD Card initilized
             HARDWARE_SERIAL_ENTER();
           }
-          else
+          
-          {
           if (CodeSeen('S'))
             filenumber = CodeValue();
             
@@ -1224,7 +1229,7 @@ void AnycubicTouchscreenClass::GetCommandFromTFT()
           PrintList();
           HARDWARE_SERIAL_PROTOCOLPGM("END"); // Filelist stop
           HARDWARE_SERIAL_ENTER();
-          }
+          
 #endif
           break;
         case 9: // A9 pause sd print
@@ -1641,6 +1646,7 @@ void AnycubicTouchscreenClass::GetCommandFromTFT()
         case 33: // A33 get version info
         {
           HARDWARE_SERIAL_PROTOCOLPGM("J33 ");
+          HARDWARE_SERIAL_PROTOCOLPGM("Knutwurst-");
           HARDWARE_SERIAL_PROTOCOLPGM(MSG_MY_VERSION);
           HARDWARE_SERIAL_ENTER();
         }

Marlin/src/lcd/anycubic_touchscreen.h

@@ -90,7 +90,7 @@ char *ftostr32(const float &);
 #endif
 
 #if ENABLED(KNUTWURST_DGUS2_TFT)
-#define SM_DIR_UP_L           "<<<<<<.gcode"
+#define SM_DIR_UP_L           "<<< BACK <<<.gcode"
 #define SM_DIR_UP_S           "DIR_UP~1.GCO"
 #define SM_SPECIAL_MENU_L     "<Special Menu>.gcode"
 #define SM_SPECIAL_MENU_S     "<SPECI~1.GCO"

README.md

@@ -1,4 +1,4 @@
-# Knutwurst's i3 MEGA (M/S/X) Firmware (based on Marlin 2.0.5.4)
+# Knutwurst's i3 MEGA (M/S/X) Firmware <br>(based on Marlin 2.0.x)
 
 <span style="color: red;">(BITTE GENAU DURCHLESEN! / PLEASE READ CAREFULLY!)</span>
 
@@ -12,7 +12,6 @@
 # Inhaltsverzeichnis (Deutsch)
 - [Funktionen](#funktionen)
    - [Was ist besser?](#besser-im-vergleich-zu-anderen-firmwares-bugfixes)
-   - [Bekannte Bugs](#bekannte-bugs)
 - [Häufig gestellte Fragen (FAQ)](#häufig-gesellte-fragen-faq)
 - [Fotos / Bilder](#bilder)
    - [Spezial Menü](#spezial-menü)
@@ -22,11 +21,10 @@
 
 
 # Table of Contets (english)
-- [Features](#faq)
+- [Features](#features)
-   - [What's better?](#faq)
+   - [What's better?](#whats-better-in-coparison-to-other-firmwares-bug-fixes)
-   - [Known Bugs](#faq)
 - [Frequently asked questions (FAQ)](#faq)
-- [Photos / Pictures](#bilder)
+- [Photos / Pictures](#pictures)
    - [Special Menü](#special-menu)
    - [Manual Mesh Beld Leveling](#manual-mesh-beld-leveling)
    - [BLTouch Beld Leveling](#bltouch-beld-leveling)
@@ -37,7 +35,7 @@
 
 ## Funktionen
 
- * Mesh-Bed Kalibrierung / Autokalibrierung mit BLTouch [(Installations-Anleitung)](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/BLTouch-Installation-(deutsch))
+ * Mesh-Bed Kalibrierung / Autokalibrierung mit [BLTouch (Installations-Anleitung)](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/BLTouch-Installation-(deutsch))
  * S-Kurven Beschleunigung
  * "Juction Deviation" statt des klassischen "Jerk" 
  * "Linear Pressure Control v1.5" aktiviert (kann mit M900 konfiguriert werden)
@@ -51,8 +49,9 @@
  * Automatische EEPROM Initialisierung
  * Filament Runout Sensor kann im Menü temporär deaktiviert werden
  * Wiederaufnahme des Drucks nach Stromausfall (WiP)
- * Druckbettgröße erweitert auf 220 x 225 x 210 mm
+ * [Druckbettgröße erweitert auf 225 x 220 x 210 mm](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/Set-new-print-bed-size)
  * Automatischer 'Slowdown', falls Daten nicht schnell genug fließen
+ * Vollautomatisches Hotend und Ultrabase PID Tuning
 
 
 ## Besser im Vergleich zu anderen Firmwares (Bugfixes):
@@ -190,11 +189,11 @@ Für (fast) jede Kombination gibt es eine passende Firmware im Download-Bereich.
 
 ## Features:
 
- * Mesh bed calibration / Auto calibration with BLTouch [(see installation Manual)](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/BLTouch-Installation-(english))
+ * Mesh bed calibration / Auto calibration with [BLTouch (Installation Manual)](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/BLTouch-Installation-(english))
  * S-curve acceleration
  * "Juction Deviation" instead of the classic "Jerk"
- * "Linear Pressure Control v1.5" enabled (can be configured with M900)
+ * "Linear Pressure Control v1.5" activated (can be configured with M900)
- * Baby stepping during printing
+ * Baby stepping during the printing process
  * Bilinear Bed Leveling (BBL)
  * Manual editing of the measuring points
  * Full Anycubic touchscreen support
@@ -202,12 +201,11 @@ Für (fast) jede Kombination gibt es eine passende Firmware im Download-Bereich.
  * Part cooling fan now runs at 100% instead of 70%
  * Pause & filament change function
  * Automatic EEPROM initialization
- * Filament Runout Sensor can be temporarily deactivated in the menu
+ * Filament runout sensor can be temporarily deactivated in the menu
- * Power outage support
+ * Resumption of printing after a power failure (WiP)
- * Print bed size enlarged to 220 x 225 x 210 mm
+ * [Print bed size enlarged to 225 x 220 x 210 mm](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/Set-new-print-bed-size)
- * Automatic slowdown in if the data is not received fast enough
+ * Automatic 'slowdown' if data does not flow fast enough
- * You don't have to do a basic configuration via GCODE.
+ * Fully automatic hotend and ultrabase PID tuning
- * You do not have to perform a factory reset
 
 ### What's better in coparison to other firmwares (bug fixes):
  * Tidy special menu

deploy_firmware_files.sh

@@ -4,14 +4,14 @@ VERSION_FILE="/Users/OKoester/Documents/Arduino/Marlin-2-0-x-Anycubic-i3-MEGA-S-
 FIRMWARE_FOLDER="/Users/OKoester/Documents/Arduino/Marlin-2-0-x-Anycubic-i3-MEGA-S-Master/.pio/build/"
 OUTPUT_FOLDER="/Users/OKoester/Desktop/i3_FIRMWARE"
 
-if [ -d "$OUTPUT_FOLDER" ]; then
-    echo "$OUTPUT_FOLDER already exists."
-else 
-    mkdir $OUTPUT_FOLDER
-fi
-
 CUSTOM_BUILD_VERSION=$(egrep -o "([0-9]{1,}\.)+[0-9]{1,}" $VERSION_FILE -m2 | tail -n1)
 
+if [ -d "$$OUTPUT_FOLDER/v$CUSTOM_BUILD_VERSION" ]; then
+    echo "$$OUTPUT_FOLDER/$CUSTOM_BUILD_VERSION already exists."
+else 
+    mkdir $OUTPUT_FOLDER/$CUSTOM_BUILD_VERSION
+fi
+
 echo "Knutwurst's Mega Firmware Version: $CUSTOM_BUILD_VERSION"
 
 cd $FIRMWARE_FOLDER
@@ -19,5 +19,5 @@ for dir in $FIRMWARE_FOLDER/*/
 do
     dir=${dir%*/}
     echo ${dir##*/}
-    cp ${dir##*/}/firmware.hex /$OUTPUT_FOLDER/${dir##*/}_v$CUSTOM_BUILD_VERSION.hex
+    cp ${dir##*/}/firmware.hex /$OUTPUT_FOLDER/$CUSTOM_BUILD_VERSION/${dir##*/}_v$CUSTOM_BUILD_VERSION.hex
 done

i3_mega_envs.ini

@@ -90,8 +90,8 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
   TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT
 
 
 
@@ -102,8 +102,8 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
   TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_TMC
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT
 
 
 
@@ -190,8 +190,8 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
   TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_BLTOUCH
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_TMC 
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_TMC -DKNUTWURST_DGUS2_TFT
 
 
 
@@ -202,8 +202,8 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
   TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S 
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT
 
 
 ###########################################################
@@ -211,6 +211,10 @@ build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S
 #  BL Touch Configurations ( TRIGORILLA_14_11 )           #
 #                                                         #
 ###########################################################
+
+#
+#  i3 Mega (normal Version)
+#
 [env:i3_MEGA_BLTOUCH_11]
 platform          = atmelavr
 board             = megaatmega2560
@@ -233,6 +237,9 @@ build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -
 build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT 
 
 
+#
+#  i3 Mega S
+#
 [env:i3_MEGA_S_BLTOUCH_11]
 platform          = atmelavr
 board             = megaatmega2560
@@ -280,6 +287,9 @@ build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT 
 
 
+#
+#  i3 Mega X
+#
 [env:i3_MEGA_X_BLTOUCH_11]
 platform          = atmelavr
 board             = megaatmega2560
@@ -287,8 +297,8 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
   TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_X -DKNUTWURST_BLTOUCH
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_TMC 
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_TMC -DKNUTWURST_DGUS2_TFT
 
 
 
@@ -299,5 +309,5 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
   TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S 
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT

platformio.ini

@@ -15,14 +15,34 @@
 # Remove '-fmax-errors=5' from build_flags below to see all.
 #
 
+
+
+# *******************************************************************************************
+# **                                                                                       **
+# **   If you want to select a specific configuration for your                             **
+# **   printer, just open the PlatformIO tab on the left, select                           **
+# **   PROJECT TASKS and then "env:i3_MEGA*" (your desired config)                         **
+# **   From there you can build and upload your code.                                      **
+# **                                                                                       **
+# *******************************************************************************************
+
 [platformio]
 src_dir      = Marlin
 boards_dir   = buildroot/share/PlatformIO/boards
 #default_envs = mega2560
-#default_envs = i3_MEGA_S_TMC
 extra_configs = i3_mega_envs.ini
 default_envs = i3_MEGA, i3_MEGA_TMC, i3_MEGA_S, i3_MEGA_S_DGUS, i3_MEGA_S_DGUS_TMC, i3_MEGA_S_TMC, i3_MEGA_X, i3_MEGA_X_TMC, i3_MEGA_BLTOUCH_10, i3_MEGA_TMC_BLTOUCH_10, i3_MEGA_S_BLTOUCH_10, i3_MEGA_S_DGUS_BLTOUCH_10, i3_MEGA_S_DGUS_TMC_BLTOUCH_10, i3_MEGA_S_TMC_BLTOUCH_10, i3_MEGA_X_BLTOUCH_10, i3_MEGA_X_TMC_BLTOUCH_10, i3_MEGA_BLTOUCH_11, i3_MEGA_TMC_BLTOUCH_11, i3_MEGA_S_BLTOUCH_11, i3_MEGA_S_DGUS_BLTOUCH_11, i3_MEGA_S_DGUS_TMC_BLTOUCH_11, i3_MEGA_S_TMC_BLTOUCH_11, i3_MEGA_X_BLTOUCH_11, i3_MEGA_X_TMC_BLTOUCH_11
 
+# *******************************************************************************************
+# **                                                                                       **
+# **   If you want to select a specific configuration for your                             **
+# **   printer, just open the PlatformIO tab on the left, select                           **
+# **   PROJECT TASKS and then "env:i3_MEGA*" (your desired config)                         **
+# **   From there you can build and upload your code.                                      **
+# **                                                                                       **
+# *******************************************************************************************
+
+
 
 [common]
 default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>