- Set MINTEMP to 1 degree celsius

- Bump Verison to 1.1.9
- Bump distribution date
- Add CodeValueInt function to prepare Laser support

.github/lock.yml

@@ -3,7 +3,7 @@
 #
 
 # Number of days of inactivity before a closed issue or pull request is locked
-daysUntilLock: 60
+daysUntilLock: 180
 
 # Skip issues and pull requests created before a given timestamp. Timestamp must
 # follow ISO 8601 (`YYYY-MM-DD`). Set to `false` to disable

Marlin/Configuration.h

@@ -595,28 +595,28 @@
 
 // Below this temperature the heater will be switched off
 // because it probably indicates a broken thermistor wire.
-#define HEATER_0_MINTEMP   5
+#define HEATER_0_MINTEMP   1
-#define HEATER_1_MINTEMP   5
+#define HEATER_1_MINTEMP   1
-#define HEATER_2_MINTEMP   5
+#define HEATER_2_MINTEMP   1
-#define HEATER_3_MINTEMP   5
+#define HEATER_3_MINTEMP   1
-#define HEATER_4_MINTEMP   5
+#define HEATER_4_MINTEMP   1
-#define HEATER_5_MINTEMP   5
+#define HEATER_5_MINTEMP   1
-#define HEATER_6_MINTEMP   5
+#define HEATER_6_MINTEMP   1
-#define HEATER_7_MINTEMP   5
+#define HEATER_7_MINTEMP   1
-#define BED_MINTEMP        5
+#define BED_MINTEMP        1
 
 // Above this temperature the heater will be switched off.
 // This can protect components from overheating, but NOT from shorts and failures.
 // (Use MINTEMP for thermistor short/failure protection.)
-#define HEATER_0_MAXTEMP 300
+#define HEATER_0_MAXTEMP 400
-#define HEATER_1_MAXTEMP 275
+#define HEATER_1_MAXTEMP 400
-#define HEATER_2_MAXTEMP 275
+#define HEATER_2_MAXTEMP 400
-#define HEATER_3_MAXTEMP 275
+#define HEATER_3_MAXTEMP 400
-#define HEATER_4_MAXTEMP 275
+#define HEATER_4_MAXTEMP 400
-#define HEATER_5_MAXTEMP 275
+#define HEATER_5_MAXTEMP 400
-#define HEATER_6_MAXTEMP 275
+#define HEATER_6_MAXTEMP 400
-#define HEATER_7_MAXTEMP 275
+#define HEATER_7_MAXTEMP 400
-#define BED_MAXTEMP      150
+#define BED_MAXTEMP      180
 
 //===========================================================================
 //============================= PID Settings ================================

Marlin/Configuration_adv.h

@@ -1487,9 +1487,7 @@
  *
  * Warning: Does not respect endstops!
  */
-#if ENABLED(KNUTWURST_BLTOUCH)
+#define BABYSTEPPING
-    #define BABYSTEPPING
-#endif
 #if ENABLED(BABYSTEPPING)
   //#define INTEGRATED_BABYSTEPPING         // EXPERIMENTAL integration of babystepping into the Stepper ISR
   //#define BABYSTEP_WITHOUT_HOMING
@@ -1663,11 +1661,11 @@
 //
 #define ARC_SUPPORT                 // Disable this feature to save ~3226 bytes
 #if ENABLED(ARC_SUPPORT)
-  #define MM_PER_ARC_SEGMENT      0 // (mm) Length (or minimum length) of each arc segment (default: 1)
+  #define MM_PER_ARC_SEGMENT      1 // (mm) Length (or minimum length) of each arc segment (default: 1)
   //#define ARC_SEGMENTS_PER_R    1 // Max segment length, MM_PER = Min
-  #define MIN_ARC_SEGMENTS        0 // Minimum number of segments in a complete circle (default: 24)
+  #define MIN_ARC_SEGMENTS        24 // Minimum number of segments in a complete circle (default: 24)
   //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
-  //#define N_ARC_CORRECTION       25 // Number of interpolated segments between corrections
+  #define N_ARC_CORRECTION       25 // Number of interpolated segments between corrections
   #define ARC_P_CIRCLES             // Enable the 'P' parameter to specify complete circles
   #define CNC_WORKSPACE_PLANES      // Allow G2/G3 to operate in XY, ZX, or YZ planes
 #endif
@@ -1704,8 +1702,8 @@
  *
  * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_POST_DIR_DELAY 650
+#define MINIMUM_STEPPER_POST_DIR_DELAY 200
-#define MINIMUM_STEPPER_PRE_DIR_DELAY 650
+#define MINIMUM_STEPPER_PRE_DIR_DELAY 200
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -1718,7 +1716,7 @@
  *
  * Override the default value based on the driver type set in Configuration.h.
  */
-#define MINIMUM_STEPPER_PULSE 2
+#define MINIMUM_STEPPER_PULSE 1
 
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows

Marlin/src/inc/Version.h

@@ -41,10 +41,10 @@
  * here we define this default string as the date where the latest release
  * version was tagged.
  */
- #define CUSTOM_BUILD_VERSION "1.1.7"
+ #define CUSTOM_BUILD_VERSION "1.1.9"
 
 #ifndef STRING_DISTRIBUTION_DATE
-  #define STRING_DISTRIBUTION_DATE "2020-11-29"
+  #define STRING_DISTRIBUTION_DATE "2021-01-13"
 #endif
 
 /**

Marlin/src/lcd/anycubic_touchscreen.cpp

@@ -428,6 +428,11 @@ void AnycubicTouchscreenClass::ParkAfterStop()
 #endif
 }
 
+int AnycubicTouchscreenClass::CodeValueInt()
+{
+  return (atoi(&TFTcmdbuffer[TFTbufindr][TFTstrchr_pointer - TFTcmdbuffer[TFTbufindr] + 1]));
+}
+
 float AnycubicTouchscreenClass::CodeValue()
 {
   return (strtod(&TFTcmdbuffer[TFTbufindr][TFTstrchr_pointer - TFTcmdbuffer[TFTbufindr] + 1], NULL));
@@ -1385,7 +1390,7 @@ void AnycubicTouchscreenClass::GetCommandFromTFT()
 #ifdef SDSUPPORT
           
           currentTouchscreenSelection[0] = 0;
-#if ENABLED(KNUTWURST_SPECIAL_MENU_WO_SD)
+#if DISABLED(KNUTWURST_SPECIAL_MENU_WO_SD)
           if (!IS_SD_INSERTED())
           {
             HARDWARE_SERIAL_PROTOCOLPGM("J02");

Marlin/src/lcd/anycubic_touchscreen.h

@@ -252,7 +252,7 @@ private:
   } OutageData;
 #endif
 
-
+  int CodeValueInt();
   float CodeValue();
   bool CodeSeen(char);
   void PrintList();
@@ -284,6 +284,7 @@ private:
   char FilamentTestStatus = false;
   char FilamentTestLastStatus = false;
   bool FilamentSetMillis = true;
+  int FilamentRunoutCounter = 0;
 #endif
 };