Update build version

Enable Software-Endstop for Z_MIN which was disabled for BLTouch in the past.
Merge pull request #326 from stklcode/feature/325-m808
2022-05-12 13:16:27 +02:00 · 2022-05-12 13:05:22 +02:00 · 2022-05-10 18:55:04 +02:00 · 2022-05-09 19:45:56 +02:00 · 2022-03-27 12:39:07 +02:00 · 2022-03-18 19:09:01 +01:00
6 changed files with 19 additions and 69 deletions
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -1972,7 +1972,7 @@
 #if ENABLED(MIN_SOFTWARE_ENDSTOPS)
  #define MIN_SOFTWARE_ENDSTOP_X
  #define MIN_SOFTWARE_ENDSTOP_Y
-  //#define MIN_SOFTWARE_ENDSTOP_Z  // Disabled for BLTouch
+  #define MIN_SOFTWARE_ENDSTOP_Z
  #define MIN_SOFTWARE_ENDSTOP_I
  #define MIN_SOFTWARE_ENDSTOP_J
  #define MIN_SOFTWARE_ENDSTOP_K
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -1387,7 +1387,7 @@
  //#define SD_IGNORE_AT_STARTUP            // Don't mount the SD card when starting up
  //#define SDCARD_READONLY                 // Read-only SD card (to save over 2K of flash)

-  //#define GCODE_REPEAT_MARKERS            // Enable G-code M808 to set repeat markers and do looping
+  #define GCODE_REPEAT_MARKERS              // Enable G-code M808 to set repeat markers and do looping

  #define SD_PROCEDURE_DEPTH 1              // Increase if you need more nested M32 calls

@@ -1902,7 +1902,7 @@
 #if ENABLED(BABYSTEPPING)
  //#define INTEGRATED_BABYSTEPPING         // EXPERIMENTAL integration of babystepping into the Stepper ISR
  //#define BABYSTEP_WITHOUT_HOMING
-  //#define BABYSTEP_ALWAYS_AVAILABLE       // Allow babystepping at all times (not just during movement).
+  #define BABYSTEP_ALWAYS_AVAILABLE         // Allow babystepping at all times (not just during movement).
  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
  #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
  //#define BABYSTEP_MILLIMETER_UNITS       // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps
@@ -1920,6 +1920,9 @@
  #endif

  //#define BABYSTEP_DISPLAY_TOTAL          // Display total babysteps since last G28
+  #if ENABLED(KNUTWURST_BLTOUCH)
+    #define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
+  #endif

  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
  #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
--- a/Marlin/src/feature/pause.cpp
+++ b/Marlin/src/feature/pause.cpp
@@ -282,8 +282,8 @@ bool load_filament(const_float_t slow_load_length/*=0*/, const_float_t fast_load
          #if EITHER(HAS_LCD_MENU, DWIN_CREALITY_LCD_ENHANCED)
            ui.pause_show_message(PAUSE_MESSAGE_OPTION); // Also sets PAUSE_RESPONSE_WAIT_FOR
          #else
-            //pause_menu_response = PAUSE_RESPONSE_WAIT_FOR;
-            pause_menu_response = PAUSE_RESPONSE_RESUME_PRINT;
+            pause_menu_response = PAUSE_RESPONSE_WAIT_FOR;
+            //pause_menu_response = PAUSE_RESPONSE_RESUME_PRINT; // KNUTWURST
          #endif
          while (pause_menu_response == PAUSE_RESPONSE_WAIT_FOR) idle_no_sleep();
        }
--- a/Marlin/src/inc/Version.h
+++ b/Marlin/src/inc/Version.h
@@ -25,7 +25,7 @@
 * Release version. Leave the Marlin version or apply a custom scheme.
 */
 #ifndef SHORT_BUILD_VERSION
-  #define SHORT_BUILD_VERSION "2.0.x"   // PATCH: Knutwurst
+  #define SHORT_BUILD_VERSION "2.0.9.2"   // PATCH: Knutwurst
 #endif

 /**
@@ -41,10 +41,10 @@
 * here we define this default string as the date where the latest release
 * version was tagged.
 */
- #define CUSTOM_BUILD_VERSION "1.4.2"
+ #define CUSTOM_BUILD_VERSION "1.4.4"

 #ifndef STRING_DISTRIBUTION_DATE
-  #define STRING_DISTRIBUTION_DATE "2022-02-13"
+  #define STRING_DISTRIBUTION_DATE "2022-05-12"
 #endif

 /**
--- a/Marlin/src/lcd/anycubic_touchscreen.cpp
+++ b/Marlin/src/lcd/anycubic_touchscreen.cpp
@@ -729,7 +729,7 @@ void AnycubicTouchscreenClass::HandleSpecialMenu() {
    else if ((strcasestr_P(currentTouchscreenSelection, PSTR(SM_BLTOUCH_L)) != NULL)
          || (strcasestr_P(currentTouchscreenSelection, PSTR(SM_BLTOUCH_S)) != NULL)) {
      SERIAL_ECHOLNPGM("Special Menu: BLTouch Leveling");
-      queue.inject_P(PSTR("G28\nG29\nM500\nG90\nM300 S440 P200\nM300 S660 P250\nM300 S880 P300\nG1 Z30 F4000\nG1 X0 F4000\nG91\nM84"));
+      queue.inject_P(PSTR("G28\nG29\nM500\nG90\nM300 S440 P200\nM300 S660 P250\nM300 S880 P300\nG1 Z30 F4000\nG1 X0 F4000\nG91\nM84\nM420 S1"));
      buzzer.tone(105, 1108);
      buzzer.tone(210, 1661);
    }
@@ -850,7 +850,7 @@ void AnycubicTouchscreenClass::HandleSpecialMenu() {
        || (strcasestr_P(currentTouchscreenSelection, PSTR(SM_EZLVL_MENU_S)) != NULL)) {
    SERIAL_ECHOLNPGM("Special Menu: Enter Easy Level Menu");
    LevelMenu = true;
-    queue.inject_P(PSTR("G28\nG90\nG1 Z5\nG1 X15 Y15 F4000\nG1 Z0"));
+    queue.inject_P(PSTR("G28\nM420 S0\nG90\nG1 Z5\nG1 X15 Y15 F4000\nG1 Z0"));
  }
  else if ((strcasestr_P(currentTouchscreenSelection, PSTR(SM_EZLVL_P1_L)) != NULL)
        || (strcasestr_P(currentTouchscreenSelection, PSTR(SM_EZLVL_P1_S)) != NULL)) {
@@ -918,7 +918,7 @@ void AnycubicTouchscreenClass::HandleSpecialMenu() {
        || (strcasestr_P(currentTouchscreenSelection, PSTR(SM_EZLVL_EXIT_S)) != NULL)) {
    SERIAL_ECHOLNPGM("Special Menu: Exit Easy Level Menu");
    LevelMenu = false;
-    queue.inject_P(PSTR("G90\nG1 Z10\nG1 X15 Y15 F4000"));
+    queue.inject_P(PSTR("G90\nG1 Z10\nG1 X15 Y15 F4000\nM420 S1"));
  }
 #endif
 }
@@ -2145,6 +2145,11 @@ void AnycubicTouchscreenClass::GetCommandFromTFT() {
            #endif

            #if ENABLED(KNUTWURST_4MAXP2)
+            case 40:
+                HARDWARE_SERIAL_PROTOCOLPGM("J17"); // J17 Main board reset
+                HARDWARE_SERIAL_ENTER();
+                delay(10);
+                break;
            case 41:
                if(CodeSeen('O')) {
                  PrintdoneAndPowerOFF = true;
--- a/ini/i3_mega.ini
+++ b/ini/i3_mega.ini
@@ -7,7 +7,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_ONE_Z_ENDSTOP
 build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -17,7 +16,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP
 build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -27,7 +25,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP
 build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -37,7 +34,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP
 build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -47,7 +43,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP
 build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -57,7 +52,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP
 build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -72,7 +66,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA
 build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -82,7 +75,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_TMC
 build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -92,7 +84,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -102,7 +93,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -112,7 +102,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -122,7 +111,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -137,7 +125,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -147,7 +134,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_TMC
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -157,7 +143,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -167,7 +152,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_S -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -177,7 +161,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -187,7 +170,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_S -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -202,7 +184,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -212,7 +193,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -222,7 +202,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -232,7 +211,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -242,7 +220,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -252,7 +229,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -267,7 +243,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -277,7 +252,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_TMC
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -287,7 +261,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -297,7 +270,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_X -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -307,7 +279,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -317,7 +288,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -331,7 +301,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -341,7 +310,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -351,7 +319,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -361,7 +328,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -371,7 +337,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -381,7 +346,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -397,7 +361,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_P -DKNUTWURST_BMG -DKNUTWURST_DGUS2_TFT
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -407,7 +370,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_BMG -DKNUTWURST_DGUS2_TFT
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -417,7 +379,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_P -DKNUTWURST_BMG -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -427,7 +388,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_P -DKNUTWURST_BMG -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -437,7 +397,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_P -DKNUTWURST_BMG -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -447,7 +406,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_P -DKNUTWURST_BMG -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT 
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON -DKNUTWURST_4MAXP2 
@@ -462,7 +420,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_CHIRON -DKNUTWURST_CHIRON
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_4MAXP2 
@@ -472,7 +429,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_CHIRON -DKNUTWURST_CHIRON -DKNUTWURST_TMC
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_4MAXP2 
@@ -487,7 +443,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_CHIRON -DKNUTWURST_CHIRON -DKNUTWURST_DGUS2_TFT
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_4MAXP2 
@@ -497,7 +452,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_CHIRON -DKNUTWURST_CHIRON -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_4MAXP2 
@@ -512,7 +466,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_4MAXP2 -DKNUTWURST_ONE_Z_ENDSTOP
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_CHIRON  -DKNUTWURST_BMG -DKNUTWURST_DGUS2_TFT
@@ -522,7 +475,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_4MAXP2 -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_TMC
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_MEGA_X -DKNUTWURST_BLTOUCH -DKNUTWURST_CHIRON  -DKNUTWURST_BMG -DKNUTWURST_DGUS2_TFT 
@@ -532,7 +484,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_4MAXP2 -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_CHIRON  -DKNUTWURST_BMG -DKNUTWURST_DGUS2_TFT 
@@ -542,7 +493,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_4MAXP2 -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_CHIRON  -DKNUTWURST_BMG -DKNUTWURST_DGUS2_TFT
@@ -553,7 +503,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_4MAXP2 -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_MEGA_X -DKNUTWURST_CHIRON  -DKNUTWURST_BMG -DKNUTWURST_DGUS2_TFT
@@ -563,7 +512,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_4MAXP2 -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_MEGA_X -DKNUTWURST_CHIRON  -DKNUTWURST_BMG -DKNUTWURST_DGUS2_TFT 
@@ -573,7 +521,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_4MAXP2 -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_DGUS2_TFT
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_CHIRON  -DKNUTWURST_BMG
@@ -583,7 +530,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_4MAXP2 -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_TMC -DKNUTWURST_DGUS2_TFT
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_MEGA_X -DKNUTWURST_BLTOUCH -DKNUTWURST_CHIRON  -DKNUTWURST_BMG
@@ -593,7 +539,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_4MAXP2 -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_CHIRON  -DKNUTWURST_BMG
@@ -603,7 +548,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_4MAXP2 -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_CHIRON  -DKNUTWURST_BMG
@@ -614,7 +558,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_4MAXP2 -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_TMC -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_MEGA_X -DKNUTWURST_CHIRON  -DKNUTWURST_BMG
@@ -624,7 +567,6 @@ platform          = atmelavr
 board             = megaatmega2560
 board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
-  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_4MAXP2 -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_TMC -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_MEGA_X -DKNUTWURST_CHIRON  -DKNUTWURST_BMG
Author	SHA1	Message	Date
Knutwurst	41d069464e	Update build version	2022-05-12 13:16:27 +02:00
Knutwurst	4f459362c2	Enable Software-Endstop for Z_MIN which was disabled for BLTouch in the past.	2022-05-12 13:05:22 +02:00
Oliver Köster	4fcbe2afd0	Merge pull request #326 from stklcode/feature/325-m808 config: enable g-code M808 for repeat markers (#325)	2022-05-10 18:55:04 +02:00
Stefan Kalscheuer	465f4cbf60	config: enable g-code M808 for repeat markers (#325 )	2022-05-09 19:45:56 +02:00
Knutwurst	e3a2aeb4cf	Revert pause response to reenable M600 pause for use with octorptint.	2022-03-27 12:39:07 +02:00
Knutwurst	cbc02f7f3d	Fix missing TMC26XStepper Lib build error.	2022-03-18 19:09:01 +01:00
Knutwurst	4985c9abf5	Only enable babystepping and probe offset change when BLTouch is enabled.	2022-02-23 10:08:45 +01:00
Knutwurst	0eaa8f902f	Combine M851 and Z babystepping	2022-02-23 10:03:44 +01:00
Knutwurst	7444f4bb45	Add reset to 4Max Pro routine	2022-02-21 13:06:24 +01:00
Knutwurst	0440770618	Bump version for next release	2022-02-18 10:32:20 +01:00
Knutwurst	c66f3559d7	Reenable Mesh after 4 point easy level.	2022-02-18 09:57:27 +01:00
Knutwurst	1183a5b51c	Fix bug, where Mesh was always applied when using 4 point easy leveling.	2022-02-18 09:53:43 +01:00