Bump Builddate.

fix manual leveling from Mega P TFT

.github/workflows/build-all.yml

@@ -90,10 +90,10 @@ jobs:
 
     steps:
 
-    - name: Setup Python 3.7
-      uses: actions/setup-python@v1
+    - name: Setup Python
+      uses: actions/setup-python@v5
       with:
-        python-version: '3.7' # Version range or exact version of a Python version to use, using semvers version range syntax.
+        python-version: '3.10' # Version range or exact version of a Python version to use, using semvers version range syntax.
         architecture: 'x64' # optional x64 or x86. Defaults to x64 if not specified
 
     - name: Install PlatformIO
@@ -124,7 +124,7 @@ jobs:
     #     .pio/build/${{ matrix.platform }}/${{ matrix.platform }}_v*.hex
 
     - name: Archive all artifacts into one ZIP file
-      uses: actions/upload-artifact@master
+      uses: actions/upload-artifact@v3
       with:
         name: Knuwurst-all-in-one-${{github.sha}}
         path: |

Marlin/Configuration.h

@@ -2404,6 +2404,9 @@
   // NOTE: After 'M412 H1' the host handles filament runout and this script does not apply.
   #define FILAMENT_RUNOUT_SCRIPT "M600"
 
+  // More relaxed threshold to prevent false-positive triggers (default: 5)
+  #define FILAMENT_RUNOUT_THRESHOLD 20
+
   // After a runout is detected, continue printing this length of filament
   // before executing the runout script. Useful for a sensor at the end of
   // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.

Marlin/Configuration_adv.h

@@ -304,13 +304,13 @@
  */
 #if ENABLED(THERMAL_PROTECTION_HOTENDS)
   #if ENABLED(KNUTWURST_CHIRON)
-    #define THERMAL_PROTECTION_PERIOD     60     // Seconds
+    #define THERMAL_PROTECTION_PERIOD     30     // Seconds
     #define THERMAL_PROTECTION_HYSTERESIS 20     // Degrees Celsius
 
     #define WATCH_TEMP_PERIOD   60               // Seconds
-    #define WATCH_TEMP_INCREASE 10               // Degrees Celsius
+    #define WATCH_TEMP_INCREASE 5               // Degrees Celsius
   #else
-    #define THERMAL_PROTECTION_PERIOD 10        // Seconds
+    #define THERMAL_PROTECTION_PERIOD 20        // Seconds
     #define THERMAL_PROTECTION_HYSTERESIS 15     // Degrees Celsius
 
     // #define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
@@ -340,22 +340,22 @@
  */
 #if ENABLED(THERMAL_PROTECTION_BED)
   #if ENABLED(KNUTWURST_CHIRON)
-    #define THERMAL_PROTECTION_BED_PERIOD         40 // Seconds
-    #define THERMAL_PROTECTION_BED_HYSTERESIS     10 // Degrees Celsius
+    #define THERMAL_PROTECTION_BED_PERIOD         120 // Seconds
+    #define THERMAL_PROTECTION_BED_HYSTERESIS     15 // Degrees Celsius
 
     /**
      * As described above, except for the bed (M140/M190/M303).
      */
-    #define WATCH_BED_TEMP_PERIOD                120 // Seconds
-    #define WATCH_BED_TEMP_INCREASE               10 // Degrees Celsius
+    #define WATCH_BED_TEMP_PERIOD                300 // Seconds
+    #define WATCH_BED_TEMP_INCREASE                2 // Degrees Celsius
   #else
-    #define THERMAL_PROTECTION_BED_PERIOD        20 // Seconds
+    #define THERMAL_PROTECTION_BED_PERIOD        30 // Seconds
     #define THERMAL_PROTECTION_BED_HYSTERESIS     2 // Degrees Celsius
 
     /**
      * As described above, except for the bed (M140/M190/M303).
      */
-    #define WATCH_BED_TEMP_PERIOD                60 // Seconds
+    #define WATCH_BED_TEMP_PERIOD               120 // Seconds
     #define WATCH_BED_TEMP_INCREASE               2 // Degrees Celsius
   #endif
 #endif

Marlin/src/inc/Version.h

@@ -41,10 +41,10 @@
  * here we define this default string as the date where the latest release
  * version was tagged.
  */
- #define CUSTOM_BUILD_VERSION "1.5.2"
+ #define CUSTOM_BUILD_VERSION "1.5.3"
 
 #ifndef STRING_DISTRIBUTION_DATE
-  #define STRING_DISTRIBUTION_DATE "2023-07-06"
+  #define STRING_DISTRIBUTION_DATE "2024-03-22"
 #endif
 
 /**

Marlin/src/lcd/extui/knutwurst/anycubic_touchscreen.cpp

@@ -1930,21 +1930,29 @@ void AnycubicTouchscreenClass::GetCommandFromTFT() {
   #if ENABLED(KNUTWURST_MEGA_P)
                 case 51:
                   if (CodeSeen('H')) {
-                    injectCommands(F("G1 Z5 F500"));
-                    injectCommands(F("G1 X30 Y30 F5000"));
-                    injectCommands(F("G1 Z0.15 F300"));
+                    injectCommands(F(
+                      "G1 Z5 F500\n"
+                      "G1 X30 Y30 F5000\n"
+                      "G1 Z0.15 F300"
+                    ));
                   } else if (CodeSeen('I')) {
-                    injectCommands(F("G1 Z5 F500"));
-                    injectCommands(F("G1 X190 Y30 F5000"));
-                    injectCommands(F("G1 Z0.15 F300"));
+                    injectCommands(F(
+                      "G1 Z5 F500\n"
+                      "G1 X190 Y30 F5000\n"
+                      "G1 Z0.15 F300"
+                    ));
                   } else if (CodeSeen('J')) {
-                    injectCommands(F("G1 Z5 F500"));
-                    injectCommands(F("G1 X190 Y190 F5000"));
-                    injectCommands(F("G1 Z0.15 F300"));
+                    injectCommands(F(
+                      "G1 Z5 F500\n"
+                      "G1 X190 Y190 F5000\n"
+                      "G1 Z0.15 F300"
+                    ));
                   } else if (CodeSeen('K')) {
-                    injectCommands(F("G1 Z5 F500"));
-                    injectCommands(F("G1 X30 Y190 F5000"));
-                    injectCommands(F("G1 Z0.15 F300"));
+                    injectCommands(F(
+                      "G1 Z5 F500\n"
+                      "G1 X30 Y190 F5000\n"
+                      "G1 Z0.15 F300"
+                    ));
                   } else if (CodeSeen('L')) {
                     injectCommands(F("G1 X100 Y100 Z50 F5000"));
                   }

Marlin/src/pins/ramps/pins_RAMPS.h

@@ -132,13 +132,6 @@
   #endif
 #endif
 
-//
-// Z Probe (when not Z_MIN_PIN)
-//
-#ifndef Z_MIN_PROBE_PIN
-  #define Z_MIN_PROBE_PIN                      2    // PATCH: Knutwurst
-#endif
-
 //
 // Steppers
 //