wp/Marlin-2-0-x-Anycubic-i3-MEGA-S
1
0
Fork 0
Code Issues 28 Pull Requests 2 Actions Packages Projects Releases 30 Wiki Activity

[BUG]Mega X heater fail #582

New Issue
Open
opened 2025-07-05 02:12:14 -05:00 by baradhili · 0 comments
baradhili commented 2025-07-05 02:12:14 -05:00 (Migrated from github.com)
Copy Link

Bug Description

After installing MEGA_X_v1.5.4, resetting to firmware defaults and running PID tune for hotend and heater. When a print starts it halts just at print temp - this doesn't matter of what the print temp is.

Steps to Reproduce

  1. install firmware
  2. reset to defaults
  3. tune PID for hotend and heater
  4. attempt to print

Expected behavior:
printing starts and succeeds

Actual behavior:
printer halts as per below log

Additional Information

Log via Repetier
Recv:7:05:31.150: start
Recv:7:05:31.158: Marlin 2.1.2.3
Recv:7:05:31.159: echo: Last Updated: 2024-06-05 | Author: (knutwurst)
Recv:7:05:31.161: echo: Compiled: Jun 5 2024
Recv:7:05:31.170: echo: Free Memory: 1625 PlannerBufferBytes: 1536
Recv:7:05:31.191: echo:V88 stored settings retrieved (727 bytes; crc 31604)
Recv:7:05:31.203: echo:; Linear Units:
Recv:7:05:31.204: echo: G21 ; (mm)
Recv:7:05:31.207: echo:; Temperature Units:
Recv:7:05:31.208: echo: M149 C ; Units in Celsius
Recv:7:05:31.211: echo:; Filament settings (Disabled):
Recv:7:05:31.213: echo: M200 S0 D1.75
Recv:7:05:31.215: echo:; Steps per unit:
Recv:7:05:31.217: echo: M92 X80.00 Y80.00 Z800.00 E400.00
Recv:7:05:31.219: echo:; Max feedrates (units/s):
Recv:7:05:31.221: echo: M203 X120.00 Y120.00 Z12.00 E60.00
Recv:7:05:31.223: echo:; Max Acceleration (units/s2):
Recv:7:05:31.224: echo: M201 X400.00 Y400.00 Z60.00 E10000.00
Recv:7:05:31.226: echo:; Acceleration (units/s2) (P R T):
Recv:7:05:31.228: echo: M204 P400.00 R3000.00 T400.00
Recv:7:05:31.231: echo:; Advanced (B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> X<max_jerk> Y<max_jerk> Z<max_jerk> E<max_jerk>):
Recv:7:05:31.232: echo: M205 B20000.00 S0.00 T0.00 X4.00 Y4.00 Z0.20 E10.00
Recv:7:05:31.234: echo:; Home offset:
Recv:7:05:31.237: echo: M206 X0.00 Y0.00 Z0.00
Recv:7:05:31.242: echo:; Mesh Bed Leveling:
Recv:7:05:31.243: echo: M420 S0 Z0.00 ; Leveling OFF
Recv:7:05:31.245: echo:; Endstop adjustment:
Recv:7:05:31.246: echo: M666 Z0.00
Recv:7:05:31.248: echo:; Hotend PID:
Recv:7:05:31.249: echo: M301 P14.29 I0.79 D64.66
Recv:7:05:31.251: echo:; Bed PID:
Recv:7:05:31.253: echo: M304 P251.78 I49.57 D319.73
Recv:7:05:31.254: echo:; Linear Advance:
Recv:7:05:31.256: echo: M900 K0.00
Recv:7:05:31.257: echo:; Filament load/unload:
Recv:7:05:31.259: echo: M603 L538.00 U555.00 ; (mm)
Recv:7:05:31.260: echo:; Filament runout sensor:
Recv:7:05:31.262: echo: M412 S1 ; Sensor ON
Recv:7:05:31.268: //action:prompt_end
Recv:7:05:31.270: echo:SD card released
Recv:7:05:31.319: FIRMWARE_NAME:Marlin 2.1.2.3 (knutwurst, Github) (Jun 5 2024 18:48:17) SOURCE_CODE_URL:github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S PROTOCOL_VERSION:1.0 MACHINE_TYPE:Knutwurst's Anycubic Printer EXTRUDER_COUNT:1 UUID:b6153152-86fb-4cd8-bda7-91c6a04c467d
Recv:7:05:31.321: Cap:SERIAL_XON_XOFF:0
Recv:7:05:31.322: Cap:BINARY_FILE_TRANSFER:0
Recv:7:05:31.324: Cap:EEPROM:1
Recv:7:05:31.326: Cap:VOLUMETRIC:1
Recv:7:05:31.328: Cap:AUTOREPORT_POS:0
Recv:7:05:31.331: Cap:AUTOREPORT_TEMP:1
Recv:7:05:31.332: Cap:PROGRESS:0
Recv:7:05:31.334: Cap:PRINT_JOB:1
Recv:7:05:31.335: Cap:AUTOLEVEL:0
Recv:7:05:31.337: Cap:RUNOUT:1
Recv:7:05:31.338: Cap:Z_PROBE:0
Recv:7:05:31.340: Cap:LEVELING_DATA:1
Recv:7:05:31.341: Cap:BUILD_PERCENT:1
Recv:7:05:31.343: Cap:SOFTWARE_POWER:0
Recv:7:05:31.347: Cap:TOGGLE_LIGHTS:0
Recv:7:05:31.349: Cap:CASE_LIGHT_BRIGHTNESS:0
Recv:7:05:31.350: Cap:EMERGENCY_PARSER:1
Recv:7:05:31.351: Cap:HOST_ACTION_COMMANDS:1
Recv:7:05:31.353: Cap:PROMPT_SUPPORT:1
Recv:7:05:31.355: Cap:SDCARD:1
Recv:7:05:31.356: Cap:MULTI_VOLUME:0
Recv:7:05:31.359: Cap:REPEAT:1
Recv:7:05:31.360: Cap:SD_WRITE:1
Recv:7:05:31.362: Cap:AUTOREPORT_SD_STATUS:0
Recv:7:05:31.363: Cap:LONG_FILENAME:0
Recv:7:05:31.364: Cap:LFN_WRITE:0
Recv:7:05:31.366: Cap:CUSTOM_FIRMWARE_UPLOAD:0
Recv:7:05:31.368: Cap:EXTENDED_M20:0
Recv:7:05:31.369: Cap:THERMAL_PROTECTION:1
Recv:7:05:31.371: Cap:MOTION_MODES:0
Recv:7:05:31.372: Cap:ARCS:1
Recv:7:05:31.374: Cap:BABYSTEPPING:1
Recv:7:05:31.379: Cap:CHAMBER_TEMPERATURE:0
Recv:7:05:31.381: Cap:COOLER_TEMPERATURE:0
Recv:7:05:31.381: Cap:MEATPACK:1
Recv:7:05:31.383: Cap:CONFIG_EXPORT:0
Recv:7:05:31.430: X:0.00 Y:0.00 Z:0.00 E:0.00 Count X:0 Y:0 Z:0 (3)
Recv:7:09:17.545: Error:Heating failed, system stopped! Heater_ID: E0
Recv:7:09:19.648: echo:Home XYZ First
Recv:7:09:19.651: echo:Heating Failed
Mesg:7:09:19.653: Firmware stopped! You can only send host and shell commands until you hit emergency stop or restart the printer. Eventually running print is stopped.
Mesg:7:09:19.899: Error:Printer halted. kill() called!
Mesg:7:09:19.900: Firmware stopped! You can only send host and shell commands until you hit emergency stop or restart the printer. Eventually running print is stopped.
Mesg:7:09:19.901: //action:poweroff

### Bug Description After installing MEGA_X_v1.5.4, resetting to firmware defaults and running PID tune for hotend and heater. When a print starts it halts just at print temp - this doesn't matter of what the print temp is. ### Steps to Reproduce 1. install firmware 2. reset to defaults 3. tune PID for hotend and heater 4. attempt to print **Expected behavior:** printing starts and succeeds **Actual behavior:** printer halts as per below log #### Additional Information Log via Repetier Recv:7:05:31.150: start Recv:7:05:31.158: Marlin 2.1.2.3 Recv:7:05:31.159: echo: Last Updated: 2024-06-05 | Author: (knutwurst) Recv:7:05:31.161: echo: Compiled: Jun 5 2024 Recv:7:05:31.170: echo: Free Memory: 1625 PlannerBufferBytes: 1536 Recv:7:05:31.191: echo:V88 stored settings retrieved (727 bytes; crc 31604) Recv:7:05:31.203: echo:; Linear Units: Recv:7:05:31.204: echo: G21 ; (mm) Recv:7:05:31.207: echo:; Temperature Units: Recv:7:05:31.208: echo: M149 C ; Units in Celsius Recv:7:05:31.211: echo:; Filament settings (Disabled): Recv:7:05:31.213: echo: M200 S0 D1.75 Recv:7:05:31.215: echo:; Steps per unit: Recv:7:05:31.217: echo: M92 X80.00 Y80.00 Z800.00 E400.00 Recv:7:05:31.219: echo:; Max feedrates (units/s): Recv:7:05:31.221: echo: M203 X120.00 Y120.00 Z12.00 E60.00 Recv:7:05:31.223: echo:; Max Acceleration (units/s2): Recv:7:05:31.224: echo: M201 X400.00 Y400.00 Z60.00 E10000.00 Recv:7:05:31.226: echo:; Acceleration (units/s2) (P<print-accel> R<retract-accel> T<travel-accel>): Recv:7:05:31.228: echo: M204 P400.00 R3000.00 T400.00 Recv:7:05:31.231: echo:; Advanced (B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> X<max_jerk> Y<max_jerk> Z<max_jerk> E<max_jerk>): Recv:7:05:31.232: echo: M205 B20000.00 S0.00 T0.00 X4.00 Y4.00 Z0.20 E10.00 Recv:7:05:31.234: echo:; Home offset: Recv:7:05:31.237: echo: M206 X0.00 Y0.00 Z0.00 Recv:7:05:31.242: echo:; Mesh Bed Leveling: Recv:7:05:31.243: echo: M420 S0 Z0.00 ; Leveling OFF Recv:7:05:31.245: echo:; Endstop adjustment: Recv:7:05:31.246: echo: M666 Z0.00 Recv:7:05:31.248: echo:; Hotend PID: Recv:7:05:31.249: echo: M301 P14.29 I0.79 D64.66 Recv:7:05:31.251: echo:; Bed PID: Recv:7:05:31.253: echo: M304 P251.78 I49.57 D319.73 Recv:7:05:31.254: echo:; Linear Advance: Recv:7:05:31.256: echo: M900 K0.00 Recv:7:05:31.257: echo:; Filament load/unload: Recv:7:05:31.259: echo: M603 L538.00 U555.00 ; (mm) Recv:7:05:31.260: echo:; Filament runout sensor: Recv:7:05:31.262: echo: M412 S1 ; Sensor ON Recv:7:05:31.268: //action:prompt_end Recv:7:05:31.270: echo:SD card released Recv:7:05:31.319: FIRMWARE_NAME:Marlin 2.1.2.3 (knutwurst, Github) (Jun 5 2024 18:48:17) SOURCE_CODE_URL:github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S PROTOCOL_VERSION:1.0 MACHINE_TYPE:Knutwurst's Anycubic Printer EXTRUDER_COUNT:1 UUID:b6153152-86fb-4cd8-bda7-91c6a04c467d Recv:7:05:31.321: Cap:SERIAL_XON_XOFF:0 Recv:7:05:31.322: Cap:BINARY_FILE_TRANSFER:0 Recv:7:05:31.324: Cap:EEPROM:1 Recv:7:05:31.326: Cap:VOLUMETRIC:1 Recv:7:05:31.328: Cap:AUTOREPORT_POS:0 Recv:7:05:31.331: Cap:AUTOREPORT_TEMP:1 Recv:7:05:31.332: Cap:PROGRESS:0 Recv:7:05:31.334: Cap:PRINT_JOB:1 Recv:7:05:31.335: Cap:AUTOLEVEL:0 Recv:7:05:31.337: Cap:RUNOUT:1 Recv:7:05:31.338: Cap:Z_PROBE:0 Recv:7:05:31.340: Cap:LEVELING_DATA:1 Recv:7:05:31.341: Cap:BUILD_PERCENT:1 Recv:7:05:31.343: Cap:SOFTWARE_POWER:0 Recv:7:05:31.347: Cap:TOGGLE_LIGHTS:0 Recv:7:05:31.349: Cap:CASE_LIGHT_BRIGHTNESS:0 Recv:7:05:31.350: Cap:EMERGENCY_PARSER:1 Recv:7:05:31.351: Cap:HOST_ACTION_COMMANDS:1 Recv:7:05:31.353: Cap:PROMPT_SUPPORT:1 Recv:7:05:31.355: Cap:SDCARD:1 Recv:7:05:31.356: Cap:MULTI_VOLUME:0 Recv:7:05:31.359: Cap:REPEAT:1 Recv:7:05:31.360: Cap:SD_WRITE:1 Recv:7:05:31.362: Cap:AUTOREPORT_SD_STATUS:0 Recv:7:05:31.363: Cap:LONG_FILENAME:0 Recv:7:05:31.364: Cap:LFN_WRITE:0 Recv:7:05:31.366: Cap:CUSTOM_FIRMWARE_UPLOAD:0 Recv:7:05:31.368: Cap:EXTENDED_M20:0 Recv:7:05:31.369: Cap:THERMAL_PROTECTION:1 Recv:7:05:31.371: Cap:MOTION_MODES:0 Recv:7:05:31.372: Cap:ARCS:1 Recv:7:05:31.374: Cap:BABYSTEPPING:1 Recv:7:05:31.379: Cap:CHAMBER_TEMPERATURE:0 Recv:7:05:31.381: Cap:COOLER_TEMPERATURE:0 Recv:7:05:31.381: Cap:MEATPACK:1 Recv:7:05:31.383: Cap:CONFIG_EXPORT:0 Recv:7:05:31.430: X:0.00 Y:0.00 Z:0.00 E:0.00 Count X:0 Y:0 Z:0 (3) Recv:7:09:17.545: Error:Heating failed, system stopped! Heater_ID: E0 Recv:7:09:19.648: echo:Home XYZ First Recv:7:09:19.651: echo:Heating Failed Mesg:7:09:19.653: Firmware stopped! You can only send host and shell commands until you hit emergency stop or restart the printer. Eventually running print is stopped. Mesg:7:09:19.899: Error:Printer halted. kill() called! Mesg:7:09:19.900: Firmware stopped! You can only send host and shell commands until you hit emergency stop or restart the printer. Eventually running print is stopped. Mesg:7:09:19.901: //action:poweroff
Sign in to join this conversation.
No Branch/Tag Specified
Branches Tags
Labels
Clear labels
bug
Something in the Firmware isn't working
documentation
Improvements or additions to documentation
duplicate
This issue or pull request already exists
good first issue
Good for newcomers
help wanted
Extra attention is needed
invalid
This doesn't seem right
new feature
New feature or request
question
Further information is requested
stale-closing-soon
wontfix
This will not be worked on
No Label
Milestone
No items
No Milestone
Projects
Clear projects
No project
Assignees
Clear assignees
wp
No Assignees
1 Participants
Notifications
Due Date
No due date set.
Dependencies

No dependencies set.

Reference: wp/Marlin-2-0-x-Anycubic-i3-MEGA-S#582
No description provided.
Delete Branch "%!s()"

Deleting a branch is permanent. Although the deleted branch may continue to exist for a short time before it actually gets removed, it CANNOT be undone in most cases. Continue?