36c8aee75b
Start migration to ExtUI module. We do not yet change much of the custom logic, but this brings us closer to upstream and allows use of some integration hooks with less patching required.
155 lines
4.7 KiB
C++
155 lines
4.7 KiB
C++
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* gcode/temp/M104_M109.cpp
|
|
*
|
|
* Hotend target temperature control
|
|
*/
|
|
|
|
#include "../../inc/MarlinConfigPre.h"
|
|
|
|
#if HAS_EXTRUDERS
|
|
|
|
#include "../gcode.h"
|
|
#include "../../module/temperature.h"
|
|
#include "../../module/motion.h"
|
|
#include "../../module/planner.h"
|
|
#include "../../lcd/marlinui.h"
|
|
|
|
#include "../../MarlinCore.h" // for startOrResumeJob, etc.
|
|
|
|
#ifdef ANYCUBIC_TOUCHSCREEN
|
|
#include "../../lcd/extui/knutwurst/anycubic_touchscreen.h"
|
|
#endif
|
|
|
|
#if ENABLED(PRINTJOB_TIMER_AUTOSTART)
|
|
#include "../../module/printcounter.h"
|
|
#if ENABLED(CANCEL_OBJECTS)
|
|
#include "../../feature/cancel_object.h"
|
|
#endif
|
|
#endif
|
|
|
|
#if ENABLED(SINGLENOZZLE_STANDBY_TEMP)
|
|
#include "../../module/tool_change.h"
|
|
#endif
|
|
|
|
/**
|
|
* M104: Set Hotend Temperature target and return immediately
|
|
* M109: Set Hotend Temperature target and wait
|
|
*
|
|
* Parameters
|
|
* I<preset> : Material Preset index (if material presets are defined)
|
|
* T<index> : Tool index. If omitted, applies to the active tool
|
|
* S<target> : The target temperature in current units. For M109, only wait when heating up.
|
|
*
|
|
* With AUTOTEMP...
|
|
* F<factor> : Autotemp Scaling Factor. Set non-zero to enable Auto-temp.
|
|
* S<min> : Minimum temperature, in current units.
|
|
* B<max> : Maximum temperature, in current units.
|
|
*
|
|
* M109 Parameters
|
|
* R<target> : The target temperature in current units. Wait for heating and cooling.
|
|
*
|
|
* Examples
|
|
* M104 S100 : Set target to 100° and return.
|
|
* M109 R150 : Set target to 150°. Wait until the hotend gets close to 150°.
|
|
*
|
|
* With PRINTJOB_TIMER_AUTOSTART turning on heaters will start the print job timer
|
|
* (used by printingIsActive, etc.) and turning off heaters will stop the timer.
|
|
*/
|
|
void GcodeSuite::M104_M109(const bool isM109) {
|
|
|
|
if (DEBUGGING(DRYRUN)) return;
|
|
|
|
#if ENABLED(MIXING_EXTRUDER) && MIXING_VIRTUAL_TOOLS > 1
|
|
constexpr int8_t target_extruder = 0;
|
|
#else
|
|
const int8_t target_extruder = get_target_extruder_from_command();
|
|
if (target_extruder < 0) return;
|
|
#endif
|
|
|
|
bool got_temp = false;
|
|
celsius_t temp = 0;
|
|
|
|
// Accept 'I' if temperature presets are defined
|
|
#if HAS_PREHEAT
|
|
got_temp = parser.seenval('I');
|
|
if (got_temp) {
|
|
const uint8_t index = parser.value_byte();
|
|
temp = ui.material_preset[_MIN(index, PREHEAT_COUNT - 1)].hotend_temp;
|
|
}
|
|
#endif
|
|
|
|
// Get the temperature from 'S' or 'R'
|
|
bool no_wait_for_cooling = false;
|
|
if (!got_temp) {
|
|
no_wait_for_cooling = parser.seenval('S');
|
|
got_temp = no_wait_for_cooling || (isM109 && parser.seenval('R'));
|
|
if (got_temp) temp = parser.value_celsius();
|
|
}
|
|
|
|
if (got_temp) {
|
|
#if ENABLED(SINGLENOZZLE_STANDBY_TEMP)
|
|
thermalManager.singlenozzle_temp[target_extruder] = temp;
|
|
if (target_extruder != active_extruder) return;
|
|
#endif
|
|
thermalManager.setTargetHotend(temp, target_extruder);
|
|
|
|
#if ENABLED(DUAL_X_CARRIAGE)
|
|
if (idex_is_duplicating() && target_extruder == 0)
|
|
thermalManager.setTargetHotend(temp ? temp + duplicate_extruder_temp_offset : 0, 1);
|
|
#endif
|
|
|
|
#if ENABLED(PRINTJOB_TIMER_AUTOSTART)
|
|
/**
|
|
* Use half EXTRUDE_MINTEMP to allow nozzles to be put into hot
|
|
* standby mode, (e.g., in a dual extruder setup) without affecting
|
|
* the running print timer.
|
|
*/
|
|
thermalManager.auto_job_check_timer(isM109, true);
|
|
#endif
|
|
|
|
if (thermalManager.isHeatingHotend(target_extruder) || !no_wait_for_cooling)
|
|
thermalManager.set_heating_message(target_extruder, !isM109 && got_temp);
|
|
}
|
|
|
|
#ifdef ANYCUBIC_TOUCHSCREEN
|
|
AnycubicTouchscreen.HeatingStart();
|
|
#endif
|
|
|
|
TERN_(AUTOTEMP, planner.autotemp_M104_M109());
|
|
|
|
if (isM109 && got_temp)
|
|
(void)thermalManager.wait_for_hotend(target_extruder, no_wait_for_cooling);
|
|
|
|
// flush the serial buffer after heating to prevent lockup by m105
|
|
SERIAL_FLUSH();
|
|
|
|
#ifdef ANYCUBIC_TOUCHSCREEN
|
|
AnycubicTouchscreen.CommandScan();
|
|
AnycubicTouchscreen.BedHeatingDone();
|
|
#endif
|
|
}
|
|
|
|
#endif // EXTRUDERS
|