Updated BLTouch Installation (english) (markdown)

Oliver Köster
2020-08-11 18:16:58 +02:00
parent d20846b07a
commit 82a9993d59

@@ -1,4 +1,4 @@
# Installation and configuration of the BL touch sensor
# Installation and configuration of the BL Touch sensor
## What we need
@@ -74,7 +74,7 @@ And this is how it looks assembled. We simply put the servo cable into the black
[[https://raw.githubusercontent.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/master/images/bltouch_07.jpg | width = 800px]]
The three wires of the BL touch sensor control the servo, which can extend and retract the tip. These must be plugged correctly onto the pins of the Trigorilla mainboard. It is important to note which board you have (TRIGORILLA_14 v1.0 or v1.1), since the pin assignment has changed here. So please don't just plug it in and hope, but check very carefully whether the pins are correct and you have selected the right board.
The three wires of the BL Touch sensor control the servo, which can extend and retract the tip. These must be plugged correctly onto the pins of the Trigorilla mainboard. It is important to note which board you have (TRIGORILLA_14 v1.0 or v1.1), since the pin assignment has changed here. So please don't just plug it in and hope, but check very carefully whether the pins are correct and you have selected the right board.
The second servo extension is laid into the printer and connects the first extension to the mainboard. You can pull it directly between the sockets on the Anycubic Hub board without change: