Updated BLTouch Installation (english) (markdown)

Oliver Köster
2020-10-28 17:07:08 +01:00
parent e1a2031c1c
commit 8bb5d0fcea

@@ -137,7 +137,7 @@ For the next steps we need the printer, a PC and Pronterface
9. If the sensor has triggered and flashes: **M280 P0 S160**
10. **M114** = Current position of the nozzle -> note! (e.g. Recv: X:40.00 Y:40.00 Z:1.30 E:0.00 Count X:3200 Y:3200 Z:520)
11. **G90**
12. **G1 X42 Y65 F4000** (values from point 10 + offset of the sensor, i.e. X=40+2 and Y=40+25)
12. **G1 X38 Y15 F4000** (values from point 10 + offset of the sensor, i.e. X=40-2 and Y=40-25)
13. **G91**
14. Place a sheet of paper under the nozzle
15. Slowly lower the nozzle with **G1 Z-1** or **G1 Z-0.1** or **G1 Z-0.02** until the paper is difficult to move.