wp/Marlin-2-0-x-Anycubic-i3-MEGA-S
1
0
Fork 0
Code Issues 28 Pull Requests 2 Actions Packages Projects Releases 30 Wiki Activity

Updated FAQ (english) (markdown)

Oliver Köster
2022-02-03 08:32:23 +01:00
parent 7e781ab8c5
commit 9177e7a6c3
1 changed files with 8 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
FAQ-(english).md

@@ -74,6 +74,14 @@
>No, just download the correct version. Nevertheless, you should still calibrate the steps. >No, just download the correct version. Nevertheless, you should still calibrate the steps.
## When I try to start printing, the console shows: "**Failed to enable Bed Leveling**".
>This error always occurs when an _attempt_ is made to activate mesh bed leveling, but no valid mesh is stored in the firmware. Activation is done with `M420 S1` in the start code, but this requires that the mesh bed leveling has also been done beforehand. You can easily check this by typing `M503` into the console and looking for several G29 commands. With `G29 S0` you can display the current mesh.
>
>Alternatively, you can also delete the line `M420 S1` from the start code so that mesh leveling is deactivated. But then there is no compensation for unevenness in the bed.
>
>OctoPrint likes to report "_The firmware of your printer has reported an error._" and aborts the print immediately.
## The mesh leveling seems to have no effect or the nozzle scratches the heating bed ## The mesh leveling seems to have no effect or the nozzle scratches the heating bed
>You have to enter in your start code that the mesh should be loaded and activated. You do this by entering the lines **M420 S1** after **G28** in your start code in the slicer. >You have to enter in your start code that the mesh should be loaded and activated. You do this by entering the lines **M420 S1** after **G28** in your start code in the slicer.