Updated Start and Endcode with preheat and purge line (mediawiki)
@@ -10,6 +10,7 @@ For more information about every single Line, please visit https://marlinfw.org/
|
|||||||
M109 S{material_print_temperature_layer_0} ; preheat and wait for hotend
|
M109 S{material_print_temperature_layer_0} ; preheat and wait for hotend
|
||||||
M300 S1000 P500 ; BEEP heating done
|
M300 S1000 P500 ; BEEP heating done
|
||||||
G28 X0 Y10 Z0 ; move X/Y to min endstops
|
G28 X0 Y10 Z0 ; move X/Y to min endstops
|
||||||
|
M420 S1 ; enable mesh leveling (not needed anymore)
|
||||||
G0 Z0.15 ; lift nozzle a bit
|
G0 Z0.15 ; lift nozzle a bit
|
||||||
G0 X2 ; move away from clips
|
G0 X2 ; move away from clips
|
||||||
G92 E0 ; zero the extruded length
|
G92 E0 ; zero the extruded length
|
||||||
@@ -28,6 +29,7 @@ For more information about every single Line, please visit https://marlinfw.org/
|
|||||||
M109 S[first_layer_temperature] ; preheat and wait for hotend
|
M109 S[first_layer_temperature] ; preheat and wait for hotend
|
||||||
M300 S1000 P500 ; BEEP heating done
|
M300 S1000 P500 ; BEEP heating done
|
||||||
G28 X0 Y10 Z0 ; move X/Y to min endstops
|
G28 X0 Y10 Z0 ; move X/Y to min endstops
|
||||||
|
M420 S1 ; enable mesh leveling (not needed anymore)
|
||||||
G0 Z0.15 ; lift nozzle a bit
|
G0 Z0.15 ; lift nozzle a bit
|
||||||
G0 X2 ; go away from clips
|
G0 X2 ; go away from clips
|
||||||
G92 E0 ; zero the extruded length
|
G92 E0 ; zero the extruded length
|
||||||
|
Reference in New Issue
Block a user