wp/Marlin-2-0-x-Anycubic-i3-MEGA-S
1
0
Fork 0
Code Issues 28 Pull Requests 2 Actions Packages Projects Releases 30 Wiki Activity

Updated BLTouch Installation (english) (markdown)

Oliver Köster
2022-02-17 17:17:11 +01:00
parent c72f6988c2
commit af69d92cd2
1 changed files with 2 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
BLTouch-Installation-(english).md

@@ -125,7 +125,7 @@ The installation can be done as usual via Cura. If you're not sure which board y
### Test 2
Start the BLTouch leveling via the special menu. After moving to Home, the nozzle lifts up and moves to the first point at X40 Y40 and should then extend the tip of the sensor. If that doesn't happen **IMMEDIATELY** switch off the printer and try the firmware with the **_11** mark. If it still doesn't work, the wiring is incorrect.
Start the Autoleveling via the special menu. After moving to Home, the nozzle lifts up and moves to the first point at X40 Y40 and should then extend the tip of the sensor. If that doesn't happen **IMMEDIATELY** switch off the printer and try the firmware with the **_11** mark. If it still doesn't work, the wiring is incorrect.
## Configuration
@@ -150,7 +150,7 @@ For the next steps we need the printer, a PC and Pronterface
17. Subtract the Z value from point 16 from that from point 10 -> 1.30 - 0.7 = **0.6 mm** -> This is our Z offset.
18. **M851 Z-0.6** (be aware of the negative sign!)
19. **M500**
20. Carry out BL Touch leveling again via the display. Finished.
20. Carry out Autoleveling again via the display. Finished.
From now on you never have to change anything again. Autoleveling can be carried out at any time. After the successful run, the created mesh is automatically saved.