Move releases

This commit is contained in:
David Ramiro 2019-01-06 01:20:52 +01:00
parent 4b21e91682
commit 00ab4d68c3
No known key found for this signature in database
GPG Key ID: 5B042737EBEEB736
5 changed files with 18 additions and 23295 deletions

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

View File

@ -48,7 +48,7 @@
* here we define this default string as the date where the latest release
* version was tagged.
*/
#define STRING_DISTRIBUTION_DATE "2019-01-02"
#define STRING_DISTRIBUTION_DATE "2019-01-04"
/**
* Required minimum Configuration.h and Configuration_adv.h file versions.

View File

@ -33,6 +33,7 @@ I provided three different precompiled hex files: One for no modifications on th
### Choose your precompiled hex:
- Download the precompiled firmware here: [Releases](https://github.com/davidramiro/Marlin-AI3M/releases)
- Choose the correct hex file:
- For TMC2208 with connectors in original orientation, use `Marlin-AI3M-XXXXXX-TMC2208.hex`
- If you use TMC2208 and already reversed your connectors, use `Marlin-AI3M-XXXXXX-TMC2208_reversed.hex`
@ -132,6 +133,22 @@ Note: These commands are tweaked for PLA printing at up to 210/60 °C. If you ru
**Reminder**: PID tuning sometimes fails. If you get fluctuating temperatures or the heater even fails to reach your desired temperature after tuning, you can always go back to the stock settings by sending `M301 P15.94 I1.17 D54.19` and save with `M500`.
## Updating
### Back up & restore your settings
Some updates require the storage to be cleared (`M502`), if mentioned in the update log. In those cases, before updating, send `M503` and make a backup of all the lines starting with:
```
M92
G29
M301
M304
```
After flashing the new version, issue a `M502` and `M500`. After that, enter every line you saved before and finish by saving with `M500`.
## Detailed changes:
- Thermal runaway protection enabled