Initial commit

Using TMC2208 in standalone mode, I've inverted the stepper direction to match Anycubics pin layout. M110 memory watcher was removed due to redundancy and - ironically - to save memory.
2018-11-16 10:32:01 +01:00
commit 6957194af3
555 changed files with 365050 additions and 0 deletions
--- a/Marlin/AnycubicTFT.h
+++ b/Marlin/AnycubicTFT.h
@@ -0,0 +1,112 @@
+/*
+ AnycubicTFT.h  --- Support for Anycubic i3 Mega TFT
+ Created by Christian Hopp on 09.12.17.
+ 
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+ 
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ Lesser General Public License for more details.
+ 
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+
+#ifndef AnycubicTFT_h
+#define AnycubicTFT_h
+
+#include <stdio.h>
+#include "MarlinConfig.h"
+
+char *itostr2(const uint8_t &x);
+
+#ifndef ULTRA_LCD
+char *itostr3(const int);
+char *ftostr32(const float &);
+#endif
+
+#define TFTBUFSIZE 4
+#define TFT_MAX_CMD_SIZE 96
+#define MSG_MY_VERSION "V116"
+
+#define ANYCUBIC_TFT_STATE_IDLE           0
+#define ANYCUBIC_TFT_STATE_SDPRINT        1
+#define ANYCUBIC_TFT_STATE_SDPAUSE        2
+#define ANYCUBIC_TFT_STATE_SDPAUSE_REQ    3
+#define ANYCUBIC_TFT_STATE_SDPAUSE_OOF    4
+#define ANYCUBIC_TFT_STATE_SDSTOP_REQ     5
+#define ANYCUBIC_TFT_STATE_SDOUTAGE       99
+
+
+class AnycubicTFTClass {
+public:
+  AnycubicTFTClass();
+  void Setup();
+  void CommandScan();
+  void BedHeatingStart();
+  void BedHeatingDone();
+  void HeatingDone();
+  void HeatingStart();
+  void FilamentRunout();
+  void KillTFT();
+  
+private:
+  char TFTcmdbuffer[TFTBUFSIZE][TFT_MAX_CMD_SIZE];
+  int TFTbuflen=0;
+  int TFTbufindr = 0;
+  int TFTbufindw = 0;
+  char serial3_char;
+  int serial3_count = 0;
+  char *TFTstrchr_pointer;
+  char TFTstate=ANYCUBIC_TFT_STATE_IDLE;
+  char FlagResumFromOutage=0;
+  uint16_t filenumber=0;
+  unsigned long starttime=0;
+  unsigned long stoptime=0;
+  uint8_t tmp_extruder=0;
+  char LastSDstatus=0;
+  uint16_t HeaterCheckCount=0;
+  
+  struct OutageDataStruct {
+    char OutageDataVersion;
+    char OutageFlag;
+    float last_position[XYZE];
+    float last_bed_temp;
+    float last_hotend_temp;
+    long lastSDposition;
+  } OutageData;
+  
+  void WriteOutageEEPromData();
+  void ReadOutageEEPromData();
+  
+  float CodeValue();
+  bool CodeSeen(char);
+  void Ls();
+  void StartPrint();
+  void PausePrint();
+  void StopPrint();
+  void StateHandler();
+  void GetCommandFromTFT();
+  void CheckSDCardChange();
+  void CheckHeaterError();
+  void HandleSpecialMenu();
+  
+  char     SelectedDirectory[30];
+  uint8_t  SpecialMenu=false;
+
+#if ENABLED(ANYCUBIC_FILAMENT_RUNOUT_SENSOR)
+  char FilamentTestStatus=false;
+  char FilamentTestLastStatus=false;
+  long FilamentRunoutCounter=0;
+#endif
+};
+
+extern AnycubicTFTClass AnycubicTFT;
+
+#endif /* AnycubicTFT_h */