Initial commit

Using TMC2208 in standalone mode, I've inverted the stepper direction to match Anycubics pin layout. M110 memory watcher was removed due to redundancy and - ironically - to save memory.
2018-11-16 10:32:01 +01:00
commit 6957194af3
555 changed files with 365050 additions and 0 deletions
--- a/Marlin/pins_GEN3_PLUS.h
+++ b/Marlin/pins_GEN3_PLUS.h
@@ -0,0 +1,101 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Gen3+ pin assignments
+ */
+
+/**
+ * Rev B    26 DEC 2016
+ *
+ * added pointer to a current Arduino IDE extension
+ *
+ */
+
+/**
+ * A useable Arduino IDE extension (board manager) can be found at
+ * https://github.com/Lauszus/Sanguino
+ *
+ * This extension has been tested on Arduino 1.6.12 & 1.8.0
+ *
+ * Here's the JSON path:
+ * https://raw.githubusercontent.com/Lauszus/Sanguino/master/package_lauszus_sanguino_index.json
+ *
+ * When installing select 1.0.2
+ *
+ * Installation instructions can be found at https://learn.sparkfun.com/pages/CustomBoardsArduino
+ * Just use the above JSON URL instead of Sparkfun's JSON.
+ *
+ * Once installed select the SANGUINO board and then select the CPU.
+ *
+ */
+
+
+#if !defined(__AVR_ATmega644P__) && !defined(__AVR_ATmega1284P__)
+  #error "Oops!  Make sure you have 'Sanguino' selected from the 'Tools -> Boards' menu."
+#endif
+
+#define BOARD_NAME         "Gen3+"
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN         20
+#define Y_STOP_PIN         25
+#define Z_STOP_PIN         30
+
+//
+// Steppers
+//
+#define X_STEP_PIN         15
+#define X_DIR_PIN          18
+#define X_ENABLE_PIN       19
+
+#define Y_STEP_PIN         23
+#define Y_DIR_PIN          22
+#define Y_ENABLE_PIN       24
+
+#define Z_STEP_PIN         27
+#define Z_DIR_PIN          28
+#define Z_ENABLE_PIN       29
+
+#define E0_STEP_PIN        17
+#define E0_DIR_PIN         21
+#define E0_ENABLE_PIN      13
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN          0   // Analog Input (pin 33 extruder)
+#define TEMP_BED_PIN        5   // Analog Input (pin 34 bed)
+
+//
+// Heaters
+//
+#define HEATER_0_PIN       12
+#define HEATER_BED_PIN     16
+
+//
+// Misc. Functions
+//
+#define SDSS                4
+#define PS_ON_PIN          14