Commit Graph

18 Commits

Author SHA1 Message Date
David Ramiro 2bd6f2f23a
Pause & runout code cleanup
Final changes to pause & filament runout overhaul before release:
- Use booleans instead of chars for cleaner code
- Raised retraction amount
2019-02-18 18:05:37 +01:00
David Ramiro 28e86b95ed
Adjust temperature limits and margins
Lowering the safety margin of MAXTEMP to 10°C and raising MAXTEMP to 285/135.

Resulting in a limit of 275°C for the hotend and 125°C for the heatbed.

Referencing #23
2019-02-11 14:16:30 +01:00
David Ramiro 01e152b456
Bugfix
- Buffer flush added to the the end of M190 loop
- Inverted position polling when canceling print via display
2019-02-06 12:32:58 +01:00
David Ramiro 5f7a252267
Enable filament change feature
Adding support for headless M600/M108 filament change

Addressing #15
2019-02-05 15:24:00 +01:00
David Ramiro a40267c4a0
Change acceleration 2019-02-02 20:20:30 +01:00
David Ramiro f01ee75004
Merge upstream changes
from https://github.com/MarlinFirmware/Marlin/tree/bugfix-1.1.x
2019-01-28 23:30:14 +01:00
David Ramiro 8aa4ed6945
Update readme
Mention PWM-fan release and update extruder calibration instructions
2019-01-22 19:48:21 +01:00
David Ramiro 7cd658e10f
Fix 5015 fan issue
Addressing issue #3
2019-01-16 21:18:29 +01:00
David Ramiro de70c97f4a
Revert bed sizing test values
Reverting some minor changes to bed size. Those were not meant for the main branch, just for testing.
2019-01-10 18:52:14 +01:00
David Ramiro 7c05040274
Move up nozzle after aborting
Raise Z for up to 5 cm (depending on current height) after aborting a print via display.

Referencing issue #9.
2019-01-07 14:07:20 +01:00
David Ramiro 00ab4d68c3
Move releases 2019-01-06 01:20:52 +01:00
David Ramiro f877f1201f
Fix home issue
Possible fix for #7 and #8
2019-01-02 18:30:50 +01:00
David Ramiro 1a8f4e8b11
Update compiled binaries 2018-12-31 20:45:25 +01:00
David Ramiro c5ae6e872f
Adjust PID tune timeouts and thermal watchdog
- Updated readme
- Adjusted WATCH_TEMP_PERIOD to be more tolerant
- Raised PID tuning timeout
- Adjusted default PID tuning commands
- Changed hex file naming
2018-12-24 14:26:06 +01:00
David Ramiro 7f311c086e
Edit default values
Getting closer to the stock settings, I edited the hotend PID and extruder step values.
2018-12-13 10:03:25 +01:00
David Ramiro 63c5ab6af1
Update precompiled hex 2018-12-02 15:22:46 +01:00
David Ramiro e527750d81
Enable S-Curve Acceleration and tweak jerk
To further optimize print quality even at very high speeds (I aim for roughly 80-100mm/s), I enabled S_CURVE_ACCELERATION and tweaked the jerk and default acceleration values.

Note: This is still in testing. As soon as I finish and it works as I like, I'll push it onto the master branch. If you see this commit on the master branch, it's safe to flash.
2018-11-28 23:33:11 +01:00
David Ramiro 6957194af3
Initial commit
Using TMC2208 in standalone mode, I've inverted the stepper direction to match Anycubics pin layout. M110 memory watcher was removed due to redundancy and - ironically - to save memory.
2018-11-16 10:32:01 +01:00