5f7a252267
Enable filament change feature
...
Adding support for headless M600/M108 filament change
Addressing #15
2019-02-05 15:24:00 +01:00
a40267c4a0
Change acceleration
2019-02-02 20:20:30 +01:00
f01ee75004
Merge upstream changes
...
from https://github.com/MarlinFirmware/Marlin/tree/bugfix-1.1.x
2019-01-28 23:30:14 +01:00
8aa4ed6945
Update readme
...
Mention PWM-fan release and update extruder calibration instructions
2019-01-22 19:48:21 +01:00
7cd658e10f
Fix 5015 fan issue
...
Addressing issue #3
2019-01-16 21:18:29 +01:00
de70c97f4a
Revert bed sizing test values
...
Reverting some minor changes to bed size. Those were not meant for the main branch, just for testing.
2019-01-10 18:52:14 +01:00
7c05040274
Move up nozzle after aborting
...
Raise Z for up to 5 cm (depending on current height) after aborting a print via display.
Referencing issue #9 .
2019-01-07 14:07:20 +01:00
00ab4d68c3
Move releases
2019-01-06 01:20:52 +01:00
f877f1201f
Fix home issue
...
Possible fix for #7 and #8
2019-01-02 18:30:50 +01:00
1a8f4e8b11
Update compiled binaries
2018-12-31 20:45:25 +01:00
c5ae6e872f
Adjust PID tune timeouts and thermal watchdog
...
- Updated readme
- Adjusted WATCH_TEMP_PERIOD to be more tolerant
- Raised PID tuning timeout
- Adjusted default PID tuning commands
- Changed hex file naming
2018-12-24 14:26:06 +01:00
7f311c086e
Edit default values
...
Getting closer to the stock settings, I edited the hotend PID and extruder step values.
2018-12-13 10:03:25 +01:00
63c5ab6af1
Update precompiled hex
2018-12-02 15:22:46 +01:00
e527750d81
Enable S-Curve Acceleration and tweak jerk
...
To further optimize print quality even at very high speeds (I aim for roughly 80-100mm/s), I enabled S_CURVE_ACCELERATION and tweaked the jerk and default acceleration values.
Note: This is still in testing. As soon as I finish and it works as I like, I'll push it onto the master branch. If you see this commit on the master branch, it's safe to flash.
2018-11-28 23:33:11 +01:00
6957194af3
Initial commit
...
Using TMC2208 in standalone mode, I've inverted the stepper direction to match Anycubics pin layout. M110 memory watcher was removed due to redundancy and - ironically - to save memory.
2018-11-16 10:32:01 +01:00
David Ramiro