wp
/
Marlin-Ai3M
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
68 Commits 4 Branches 17 Tags 5.5 MiB
Commit Graph

13 Commits

Author SHA1 Message Date
David Ramiro 5893bcbcc0
Merge Marlin 1.1.8 2019-01-31 12:25:28 +01:00
David Ramiro 8aa4ed6945
Update readme 
Mention PWM-fan release and update extruder calibration instructions
 2019-01-22 19:48:21 +01:00
David Ramiro 7cd658e10f
Fix 5015 fan issue 
Addressing issue #3
 2019-01-16 21:18:29 +01:00
David Ramiro de70c97f4a
Revert bed sizing test values 
Reverting some minor changes to bed size. Those were not meant for the main branch, just for testing.
 2019-01-10 18:52:14 +01:00
David Ramiro 7c05040274
Move up nozzle after aborting 
Raise Z for up to 5 cm (depending on current height) after aborting a print via display.

Referencing issue #9.
 2019-01-07 14:07:20 +01:00
David Ramiro 00ab4d68c3
Move releases 2019-01-06 01:20:52 +01:00
David Ramiro f877f1201f
Fix home issue 
Possible fix for #7 and #8
 2019-01-02 18:30:50 +01:00
David Ramiro 1a8f4e8b11
Update compiled binaries 2018-12-31 20:45:25 +01:00
David Ramiro c5ae6e872f
Adjust PID tune timeouts and thermal watchdog 
- Updated readme
- Adjusted WATCH_TEMP_PERIOD to be more tolerant
- Raised PID tuning timeout
- Adjusted default PID tuning commands
- Changed hex file naming
 2018-12-24 14:26:06 +01:00
David Ramiro 7f311c086e
Edit default values 
Getting closer to the stock settings, I edited the hotend PID and extruder step values.
 2018-12-13 10:03:25 +01:00
David Ramiro 63c5ab6af1
Update precompiled hex 2018-12-02 15:22:46 +01:00
David Ramiro e527750d81
Enable S-Curve Acceleration and tweak jerk 
To further optimize print quality even at very high speeds (I aim for roughly 80-100mm/s), I enabled S_CURVE_ACCELERATION and tweaked the jerk and default acceleration values.

Note: This is still in testing. As soon as I finish and it works as I like, I'll push it onto the master branch. If you see this commit on the master branch, it's safe to flash.
 2018-11-28 23:33:11 +01:00
David Ramiro 6957194af3
Initial commit 
Using TMC2208 in standalone mode, I've inverted the stepper direction to match Anycubics pin layout. M110 memory watcher was removed due to redundancy and - ironically - to save memory.
 2018-11-16 10:32:01 +01:00