wp/Marlin-2-0-x-Anycubic-i3-MEGA-S
1
0
Fork 0
Code Issues 28 Pull Requests 2 Actions Packages Projects Releases 30 Wiki Activity

Trigorilla Board selection fix, thanks to Daniel Epp. This is necessary if you want to use a BLTouch sensor in thins setup.

Browse Source
This commit is contained in:
Knutwurst
2020-06-12 12:02:16 +02:00
parent d090049594
commit d656a841b7
1 changed files with 13 additions and 16 deletions
Download Patch File Download Diff File Expand all files Collapse all files

29
Marlin/Configuration.h
View File

@@ -129,7 +129,19 @@
// Enable the Bluetooth serial interface on AT90USB devices
//#define BLUETOOTH
// Choose the name from boards.h that matches your setup
/**
* Select your version of the Trigorilla (RAMPS1.4) board here.
*
* BOARD_TRIGORILLA_14 = Default Trigorilla
* BOARD_TRIGORILLA_14_11 = Newer Trigorilla v1.1 (first seen late 2018)
*
* The only major difference is a slight change on the servo pin mapping.
* This setting only is relevant if you want to use BLtouch or similar
* mods to be used via servo pins.
* The new version is to be identified by a "TRIGORILLA1.1" lettering
* on the upper left of the PCB silkscreen.
*/
#ifndef MOTHERBOARD
#define MOTHERBOARD BOARD_TRIGORILLA_14
#endif
@@ -2339,21 +2351,6 @@
// Allow servo angle to be edited and saved to EEPROM
//#define EDITABLE_SERVO_ANGLES
/**
* Select your version of the Trigorilla (RAMPS1.4) board here.
*
* 0 = Default Trigorilla
* 1 = Newer Trigorilla v1.1 (first seen late 2018)
*
* The only major difference is a slight change on the servo pin mapping.
* This setting only is relevant if you want to use BLtouch or similar
* mods to be used via servo pins.
* The new version is to be identified by a "TRIGORILLA1.1" lettering
* on the upper left of the PCB silkscreen.
*/
#define TRIGORILLA_VERSION 0
// Enable Anycubic TFT
#define ANYCUBIC_TOUCHSCREEN
#define ANYCUBIC_FILAMENT_RUNOUT_SENSOR
//#define ANYCUBIC_TFT_DEBUG