wp/Marlin-2-0-x-Anycubic-i3-MEGA-S
1
0
Fork 0
Code Issues 28 Pull Requests 2 Actions Packages Projects Releases 30 Wiki Activity
426 Commits 1 Branch 37 Tags
090f82814ab9bbf99682568e86fd89536bbce126
Commit Graph

91 Commits

Author SHA1 Message Date
Knutwurst
090f82814a Fix Chiron 4 point easy leveling where only point 1 was usable. 2021-04-10 15:08:30 +02:00
Knutwurst
e0aa7f7d96 Disable (slow) TFT error correction. 2021-04-10 15:04:04 +02:00
Knutwurst
8c0ffc5ddb Edit FlowRate in 1 percet steps instead of 5 percent. 2021-04-06 11:43:19 +02:00
Knutwurst
3e558a61b2 Add more warnings 2021-03-03 09:50:23 +01:00
Knutwurst
7f56178d13 Complete rewrite of anycubic tft code structure + cleanup for upcoming Chiron BBL feature. 2021-02-18 18:18:38 +01:00
Knutwurst
7949ab4f51 - Fix Mega X pin mapping 
- Fix Chiron support
 2021-02-17 16:40:34 +01:00
Knutwurst
9734a61c2a A little cleanup 2021-01-19 09:21:17 +01:00
Knutwurst
fe5f2c6e16 Add rudimentary Chiron support. Currently only base configuration, but no propritary control menu settings. 2021-01-18 16:20:48 +01:00
Knutwurst
c6b6c280fb Laser and BMP struct initialisation. 2021-01-18 15:38:56 +01:00
Knutwurst
a52aa9f69f Add more Mega Pro Laser stuff. 2021-01-18 15:31:33 +01:00
Knutwurst
3f6663dca4 Add Chiron an Laser Stuff. Currently not in a good working condition, so be careful! 2021-01-18 15:22:14 +01:00
Knutwurst
451526bf15 Fix TFT pause feature in Mega X 2021-01-18 15:21:27 +01:00
Knutwurst
5d1444295b - Set MINTEMP to 1 degree celsius 
- Bump Verison to 1.1.9
- Bump distribution date
- Add CodeValueInt function to prepare Laser support
 2021-01-13 15:36:03 +01:00
Knutwurst
eee52d4fd8 Bugfix for special menu not shown anymore when no sd card is inserted 2020-12-07 18:21:41 +01:00
Knutwurst
fed42db5bd Code Cleanup 2020-11-02 21:19:58 +01:00
Knutwurst
79a5fd53c6 Add buzzer sound when PID tuning is done. 
Set default Jerk to 8 instead of 10 to compensate higher acceleration values.
 2020-10-21 09:22:13 +02:00
Knutwurst
234be5373f Special Menu and/or the SD card requirement can be disabled. 2020-10-13 18:05:49 +02:00
Knutwurst
fc29d72b29 Implement 4 point easy leveling 2020-10-04 12:15:28 +02:00
Knutwurst
b04997f045 Re-enable Filament runout on boot. 2020-09-09 10:20:11 +02:00
Knutwurst
6a7ec5fc06 Start Mesh leveling is now in sub menu. Flow rate can be adjusted in special menu. 2020-09-08 17:55:20 +02:00
Knutwurst
9140808f2d Add Howto-Screenshot 2020-08-26 17:05:52 +02:00
Knutwurst
0f53591818 Small initialisation fix. 2020-08-26 14:56:45 +02:00
Knutwurst
f363260a49 Massive Code Cleanup and Filament Runout Sensor Pin isn't a magic number anymore. 2020-08-26 14:48:53 +02:00
Knutwurst
bd2cb8080a Reenable T0 Sensor Message handling 2020-08-26 11:26:20 +02:00
Knutwurst
697bc6f45c PID Tuning is now automatially saved to EEPROM. 2020-08-26 11:25:09 +02:00
Knutwurst
52126609af Fix too long version number 2020-08-25 19:56:01 +02:00
Knutwurst
aa57f4be9d Fix for Special Menu without SD card 2020-08-25 19:39:08 +02:00
Knutwurst
e4a828f32a Increase filament runout watch from 3 to 5 seconds. 2020-08-25 08:56:45 +02:00
Knutwurst
c65ec66cb1 Add Manual Mesh Leveling Sub-Menu. 2020-08-24 14:48:07 +02:00
Knutwurst
b8cbfd7569 - Disable DGUS Fix for Mega X to switch to the better Special Menu 
- Bump Version to 1.1.4 Beta
- Fix Special Menu Handling when no SD Card is present
- Add Pictures for new WIKI Page
- Set Classic jerk to 0.2 since this is needed for Mesh Leveling
 2020-08-23 11:40:00 +02:00
Knutwurst
98852f7164 Show Special Menu even if no SD card is inserted. 2020-08-22 15:07:43 +02:00
Knutwurst
810526e377 Some minor Touchscreen fixes 2020-08-22 14:44:01 +02:00
Knutwurst
f663765c7e Add detailed Version Info for DGUS II. 2020-08-21 23:52:11 +02:00
Knutwurst
27c074ba25 Enable Junction Deviation for MEGA X 2020-08-17 16:40:50 +02:00
Knutwurst
fb22e90d6d Fix z height when using hotend pid autotune 2020-08-16 12:10:01 +02:00
Knutwurst
f078706442 - Disable Stepper after Hotend PID Tuning 
- Bump version zu 1.1.3 Release
- Finally Fix 0.01 Steps for manual leveling
 2020-08-16 12:01:30 +02:00
Knutwurst
fe734e1152 - Lower max feedrate for Z on MEGA M and S 
- fully automatize PID tuning
- Bump Version to 1.1.3-BETA
 2020-08-15 22:30:42 +02:00
Knutwurst
4d5d068a99 Disable stepper motors after BLTouch leveling is done 2020-08-14 12:49:58 +02:00
Knutwurst
bcc3964aed Feature: Very fast BLTouch probing 2020-08-12 22:10:23 +02:00
Knutwurst
9c59d44e9f DGUS2 TFT Bugfix when serial error occures 2020-08-12 20:05:09 +02:00
Knutwurst
e08673ac8d Bugfix: Hotend Fan did not start up when starting PID tuning. 2020-08-12 16:22:55 +02:00
Knutwurst
25364c7f2f More convinient BLTouch leveling with auto saving and homing. 2020-08-09 15:51:44 +02:00
Knutwurst
53b0ac3c3a Add userdefines for touchscreen preheat functions 2020-08-07 20:01:55 +02:00
Knutwurst
45816ee091 Bugfix #7 Revert step handling for mesh leveling. 2020-07-27 19:26:28 +02:00
Knutwurst
a709457baa Cleanup unused anycubic related code 2020-07-26 22:29:18 +02:00
Knutwurst
32d498e26c Bugfix: File is selectable, but the print can not start when using the print button. 2020-07-26 20:22:00 +02:00
Knutwurst
790c5191c8 Fix typo 2020-07-26 16:25:37 +02:00
Knutwurst
36e2e5be91 Add feature switch for new DGUS TFT in master firmware 2020-07-26 16:16:10 +02:00
Knutwurst
d70a585be8 Add debug define 2020-07-26 13:19:59 +02:00
Knutwurst
3c2d6f7965 Fix long filenames 2020-07-25 12:27:34 +02:00