Knutwurst
|
7852f925ce
|
New PID values for new thermistor type.
|
2022-02-01 13:06:06 +01:00 |
|
Knutwurst
|
e5271d7b2f
|
Optimize Extruder Feedrates and turn off fans at pause.
|
2022-01-27 16:08:45 +01:00 |
|
Knutwurst
|
69328f5246
|
Go back to A4988 timings on Mega Pro to (hopefully) fix whining noise.
|
2022-01-25 09:37:29 +01:00 |
|
Knutwurst
|
d19dbf0be5
|
Use software PWM for fans and heaters to minimize fan noise and support bigger fans. Also use pwm dithering to ensure the same fan speed resolution.
|
2022-01-24 21:14:35 +01:00 |
|
Knutwurst
|
425f89e924
|
New PID Values for new thermistor settings
|
2022-01-24 19:47:03 +01:00 |
|
Knutwurst
|
0d4346542b
|
Disable POWER_OFF Pin for other printers than 4MAX so Pin 21 can be used for BLTouch. Also add two thermistor types for debugging purpose.
|
2022-01-22 15:34:24 +01:00 |
|
Knutwurst
|
7ef2dbdac3
|
Set correct thermistor type for all stock anycubic printers.
|
2022-01-21 18:07:26 +01:00 |
|
Knutwurst
|
a7495a49c5
|
Cleanup unused environment variables from older build configurations
|
2022-01-09 15:07:10 +01:00 |
|
Knutwurst
|
899f35e029
|
Remove 4MAX Metal Configuration because the printer uses a 12864 display instead of Anycubic 0.0.2
|
2022-01-09 14:43:47 +01:00 |
|
Knutwurst
|
f631eeac24
|
Set deault fade height to 0 mm to disable it
|
2021-11-21 21:32:40 +01:00 |
|
Knutwurst
|
60ff8e8cb2
|
Increase probing margin to avoid X to move ourside the bed
|
2021-11-20 23:40:53 +01:00 |
|
Knutwurst
|
2719ba6690
|
Add Z_SAFE_HOMING for 4MAX with BLTouch
|
2021-11-16 12:24:57 +01:00 |
|
Knutwurst
|
d0219c5632
|
Add Z_MIN_ENDSTOP inversion logic
|
2021-11-16 12:22:44 +01:00 |
|
Knutwurst
|
4b9b66b8a6
|
Fix in BLT Config
|
2021-11-16 12:16:54 +01:00 |
|
Knutwurst
|
515df460ae
|
BLTouch Config for 4MAX Pro which uses Z-Min-Pin
|
2021-11-16 12:13:33 +01:00 |
|
Knutwurst
|
446e447c50
|
Disable Z Software Endstop for BLTouch
|
2021-11-14 12:25:18 +01:00 |
|
Knutwurst
|
8bf38f49a0
|
Adapt new setAxis implementation
|
2021-11-07 11:25:06 +01:00 |
|
Knutwurst
|
35ea8497b0
|
Fine tune acceleration, jerk and feedrate settings for all printers especially 4MAX Pro
|
2021-11-06 21:50:09 +01:00 |
|
Knutwurst
|
e03c58d79a
|
Restore leveling after G28
|
2021-11-06 01:59:39 +01:00 |
|
Knutwurst
|
dd169b7cca
|
Reenable Linear Advance on all models which was disabled since Update to 2.0.9.2
|
2021-11-05 11:02:47 +01:00 |
|
Knutwurst
|
bb8c10ea60
|
Add missing eeprom features for Chiron TFT leveling.
|
2021-11-03 13:20:07 +01:00 |
|
Knutwurst
|
d581c26db2
|
Remove SERIAL_PORT_2 code duplication
|
2021-11-03 09:31:01 +01:00 |
|
Stefan Kalscheuer
|
7077da3591
|
update code base to Marlin 2.0.9.2
|
2021-11-02 10:28:40 +01:00 |
|
Knutwurst
|
7e2409b8a0
|
Fix build.
|
2021-10-31 00:12:49 +02:00 |
|
Knutwurst
|
c4725d946d
|
Add original 4MAX Metal configuration and build profile. Also add Case Light control.
|
2021-10-31 00:09:41 +02:00 |
|
Knutwurst
|
bf4572488f
|
Fix stepper motor directions for 4MAX Pro 2.0
|
2021-10-30 22:47:19 +02:00 |
|
Knutwurst
|
4a58b4b093
|
Add full 4MAX Pro 2.0 configuration including case light. This might be buggy regadring motor directions and has to be tested!
|
2021-10-29 18:12:06 +02:00 |
|
Knutwurst
|
21d062c285
|
Disable Wifi for 1.3.1 Release
|
2021-09-23 18:37:47 +02:00 |
|
Knutwurst
|
ad974e176c
|
Fix for #197 Print Menu file list, when there were exactely 3 files or folders on the sd card. This was caused by a misinterpreted comparision between uint16_t and integer.
|
2021-09-17 21:28:42 +02:00 |
|
Knutwurst
|
0b48145044
|
Add additional baudrate setting for serial 2.
|
2021-09-13 12:04:09 +02:00 |
|
Knutwurst
|
28993ec8b6
|
Bump version and reenable secondary serial port
|
2021-09-13 08:28:20 +02:00 |
|
Knutwurst
|
cf29882768
|
Fix typo
|
2021-09-12 16:36:55 +02:00 |
|
Knutwurst
|
b16342e759
|
Just a little cleanup
|
2021-09-12 16:35:06 +02:00 |
|
Knutwurst
|
6bc23bb27e
|
Disable TFT Debugging for production
|
2021-09-12 16:32:34 +02:00 |
|
Knutwurst
|
d85ebb2506
|
Add additional serial connection to EXP1 Header to connect ESP3D Wifi Module. #194
|
2021-09-12 16:31:36 +02:00 |
|
Knutwurst
|
b3f4dcb2d1
|
Extruder jerk tweak for chiron
|
2021-07-12 22:08:37 +02:00 |
|
Knutwurst
|
c06c1f37a4
|
Removed misleading pin assignment.
|
2021-06-29 08:43:30 +02:00 |
|
Knutwurst
|
79f44aa23c
|
Correctly measured Extruder Steps
|
2021-06-25 12:09:04 +02:00 |
|
Knutwurst
|
56e283ea9a
|
Tweak default acceleration for TMC drivers
|
2021-06-24 08:35:47 +02:00 |
|
Knutwurst
|
75e6aa1ac8
|
Slower homing feedrate for chiron
|
2021-06-23 18:31:50 +02:00 |
|
Knutwurst
|
fc01d05bb6
|
Increase maximum hotend target temperature to 300 degrees instead of 260.
|
2021-06-21 22:33:26 +02:00 |
|
Knutwurst
|
035538dac7
|
Back to special TMC/A4988 timings
|
2021-06-21 21:50:18 +02:00 |
|
Knutwurst
|
df00fdd01e
|
Fix Chiron Endstop Configuration and Pin mapping.
|
2021-06-21 12:02:00 +02:00 |
|
Knutwurst
|
cb0f10f4b6
|
Fine tune Z Probe offset for chiron.
|
2021-06-20 13:21:51 +02:00 |
|
Knutwurst
|
320ba839dd
|
Tune probe settings for chiron.
|
2021-06-20 13:13:27 +02:00 |
|
Knutwurst
|
6437bbfe91
|
Reset temp values to maximum possible and fix typo.
|
2021-06-20 12:46:32 +02:00 |
|
Knutwurst
|
4172c90f07
|
More chiron fixes. Reduced memory usage and better thermal runaway values.
|
2021-06-12 11:06:16 +02:00 |
|
Knutwurst
|
1d499a99f8
|
Chiron fixes by DKoch83
|
2021-06-04 18:29:02 +02:00 |
|
Knutwurst
|
0fb9bcf66d
|
Reset print bed size für i3 MEGA, since this printer has a smaller print area.
|
2021-05-31 12:42:31 +02:00 |
|
Knutwurst
|
238fd8e077
|
Revert homing speed
|
2021-05-20 13:06:36 +02:00 |
|