Knutwurst
|
83aca360b7
|
Change MEGA_P to MEGA_P_DGUS environments so that the naming is consistent between all printers.
|
2021-11-11 09:34:33 +01:00 |
|
Knutwurst
|
d7cd75dba6
|
Implement missing Pause feature for Anycubic TFT
|
2021-11-11 09:13:51 +01:00 |
|
Knutwurst
|
62e2473450
|
Recreate Chiron ABL TFT feature
|
2021-11-10 11:48:33 +01:00 |
|
Oliver Köster
|
33a90d329b
|
Merge pull request #225 from stklcode/feature/host-actions
config: enable host action commands and host prompt support
|
2021-11-09 21:58:04 +01:00 |
|
Stefan Kalscheuer
|
866675b72b
|
config: enable host action commands and host prompt support
This allows actions for pause/resume and receive a notice on
filament runout or change requests in OctoPrint.
|
2021-11-09 20:32:18 +01:00 |
|
Knutwurst
|
85fb3005e4
|
Change ANY to EITHER macro when only using two values
|
2021-11-07 11:27:45 +01:00 |
|
Knutwurst
|
8bf38f49a0
|
Adapt new setAxis implementation
|
2021-11-07 11:25:06 +01:00 |
|
Knutwurst
|
3669004077
|
Add all 4MAX hardware combinations. BLTouch Versions are disabled in prebuild, but can be selected and compiled manually if desired.
|
2021-11-06 22:09:15 +01:00 |
|
Knutwurst
|
35ea8497b0
|
Fine tune acceleration, jerk and feedrate settings for all printers especially 4MAX Pro
|
2021-11-06 21:50:09 +01:00 |
|
Knutwurst
|
e03c58d79a
|
Restore leveling after G28
|
2021-11-06 01:59:39 +01:00 |
|
Knutwurst
|
9cbf70c2ee
|
Fix Pid Tune Hotend on 4MAX and 4MAXP2
|
2021-11-05 11:07:44 +01:00 |
|
Knutwurst
|
dd169b7cca
|
Reenable Linear Advance on all models which was disabled since Update to 2.0.9.2
|
2021-11-05 11:02:47 +01:00 |
|
Knutwurst
|
39e9d4f642
|
Add 4MAX BLTouch github CI workflow
|
2021-11-05 10:41:36 +01:00 |
|
Knutwurst
|
62479aabd0
|
Add 4MAX BLTouch build environments.
|
2021-11-05 10:32:15 +01:00 |
|
Oliver Köster
|
d2e7bf96ba
|
Update README.md
|
2021-11-04 09:42:16 +01:00 |
|
Knutwurst
|
5fa2ac947c
|
Add BLTouch wiring diagram for MEGA Pro
|
2021-11-04 08:40:29 +01:00 |
|
Knutwurst
|
9bf04b2e18
|
PowerOffPin set up at init.
|
2021-11-03 20:57:42 +01:00 |
|
Knutwurst
|
806737d701
|
Disable unused 4MAX powerdown code
|
2021-11-03 20:47:48 +01:00 |
|
Knutwurst
|
48688147b9
|
Move Power-off-pin to ramps.h
|
2021-11-03 20:15:47 +01:00 |
|
Knutwurst
|
0fae7ebb09
|
Add auto-power-down feature to 4MAX Pro.
|
2021-11-03 19:25:31 +01:00 |
|
Knutwurst
|
38962febfe
|
Bump release date for new version
|
2021-11-03 15:06:51 +01:00 |
|
Knutwurst
|
b6a11d2648
|
Add EZLevel points for 4MAX and 4MAX Pro
|
2021-11-03 15:05:20 +01:00 |
|
Knutwurst
|
bdd8e15b65
|
Set correct baudrate to first serial interface
|
2021-11-03 14:46:41 +01:00 |
|
Knutwurst
|
bb8c10ea60
|
Add missing eeprom features for Chiron TFT leveling.
|
2021-11-03 13:20:07 +01:00 |
|
Knutwurst
|
d581c26db2
|
Remove SERIAL_PORT_2 code duplication
|
2021-11-03 09:31:01 +01:00 |
|
Knutwurst
|
09abca7bc7
|
Fix chiron v1 pic
|
2021-11-02 13:14:43 +01:00 |
|
Knutwurst
|
0d7f1927cb
|
Add Mega S second generation picture
|
2021-11-02 13:12:37 +01:00 |
|
Knutwurst
|
751da659fb
|
Add more images
|
2021-11-02 13:11:12 +01:00 |
|
Oliver Köster
|
7432ea4000
|
Merge pull request #222 from stklcode/feature/laser
config: define laser pins for Mega P
|
2021-11-02 11:10:30 +01:00 |
|
Knutwurst
|
1707addea7
|
bump version for nex beta release
|
2021-11-02 11:02:35 +01:00 |
|
Stefan Kalscheuer
|
a16109379e
|
config: define laser pins for Mega P
|
2021-11-02 10:53:02 +01:00 |
|
Oliver Köster
|
f7a3a6a610
|
Merge pull request #211 from stklcode/feature/marlin-2.0.9
update code base to Marlin 2.0.9.2
|
2021-11-02 10:48:22 +01:00 |
|
Stefan Kalscheuer
|
9ffed0e031
|
harmonize indentation in anycubic_touchscreen sources
|
2021-11-02 10:28:40 +01:00 |
|
Stefan Kalscheuer
|
7077da3591
|
update code base to Marlin 2.0.9.2
|
2021-11-02 10:28:40 +01:00 |
|
Oliver Köster
|
b9d7ba838e
|
Update README.md
|
2021-11-02 08:50:33 +01:00 |
|
Knutwurst
|
5f39a77129
|
Upload printer images for 4MAX and 4MAX Pro
|
2021-11-02 08:49:18 +01:00 |
|
Oliver Köster
|
fcfbc53e76
|
Update README.md
|
2021-11-02 08:46:47 +01:00 |
|
Knutwurst
|
62fb935883
|
A little cleanup
|
2021-10-31 00:17:57 +02:00 |
|
Knutwurst
|
250e7a34eb
|
Add github workflow for new $MAX build variants
|
2021-10-31 00:15:05 +02:00 |
|
Knutwurst
|
7e2409b8a0
|
Fix build.
|
2021-10-31 00:12:49 +02:00 |
|
Knutwurst
|
c4725d946d
|
Add original 4MAX Metal configuration and build profile. Also add Case Light control.
|
2021-10-31 00:09:41 +02:00 |
|
Knutwurst
|
bf4572488f
|
Fix stepper motor directions for 4MAX Pro 2.0
|
2021-10-30 22:47:19 +02:00 |
|
Knutwurst
|
4a58b4b093
|
Add full 4MAX Pro 2.0 configuration including case light. This might be buggy regadring motor directions and has to be tested!
|
2021-10-29 18:12:06 +02:00 |
|
Knutwurst
|
2368fe1a55
|
Add 4MAXP2 build configuration
|
2021-10-29 16:53:17 +02:00 |
|
Knutwurst
|
d845160163
|
Allow ed temoeratures higher than 115 degrees
|
2021-09-30 10:24:50 +02:00 |
|
Knutwurst
|
21d062c285
|
Disable Wifi for 1.3.1 Release
1.3.1
|
2021-09-23 18:37:47 +02:00 |
|
Knutwurst
|
04fcfa3b30
|
Fix Chiron Z-Offset editing via special menu
1.3.0
|
2021-09-18 21:54:20 +02:00 |
|
Knutwurst
|
3eff63185d
|
Set correct version
|
2021-09-18 12:35:29 +02:00 |
|
Knutwurst
|
533d44bf94
|
Cleanup
|
2021-09-17 21:38:18 +02:00 |
|
Knutwurst
|
ad974e176c
|
Fix for #197 Print Menu file list, when there were exactely 3 files or folders on the sd card. This was caused by a misinterpreted comparision between uint16_t and integer.
|
2021-09-17 21:28:42 +02:00 |
|