Knutwurst
|
6fff254817
|
Let's try something else...
|
2020-07-22 09:39:43 +02:00 |
|
Knutwurst
|
a3a47856c2
|
Use PROGMEM for TFT string handling
|
2020-07-21 08:25:45 +02:00 |
|
Knutwurst
|
1c3f1e9ada
|
Add original anycubic stuff for tft serial handling including serial flush in case of error.
|
2020-07-20 21:10:44 +02:00 |
|
Knutwurst
|
e0a9012556
|
Small hardware serial protocol bugfix, which causes crashes inside the tft firmware
|
2020-07-18 22:50:35 +02:00 |
|
Knutwurst
|
620052b991
|
Update Codebase to Marlin 2.0.5.4
|
2020-07-17 09:54:52 +02:00 |
|
Knutwurst
|
d174e84f4e
|
Remove unused mes menu item.
|
2020-07-15 10:10:22 +02:00 |
|
Knutwurst
|
e9515c89f2
|
Fix BLTouch menu entry
|
2020-07-14 20:44:18 +02:00 |
|
Knutwurst
|
ca41c9a310
|
Switch to prerelease
|
2020-07-14 20:39:21 +02:00 |
|
Knutwurst
|
68338f49ec
|
Bump version to 1.0.7 for next release.
|
2020-07-14 20:37:55 +02:00 |
|
Knutwurst
|
a7b4298ffd
|
Add BLTouch special menu item.
|
2020-07-14 20:33:42 +02:00 |
|
Knutwurst
|
97d6db15cf
|
Add BLTouch Support (can be enabled with #define KNUTWURST_BLTOUCH)
|
2020-07-14 20:09:41 +02:00 |
|
Knutwurst
|
5d3be2c342
|
- Rework of Touchscreen serial protocol handling
- Disable Endstop Beep
- Bugfix when stopping sd print while heating leads to a endless printing loop
- Bump version to 1.0.6 for next release
|
2020-07-11 13:29:06 +02:00 |
|
Knutwurst
|
d88d98d691
|
New serial protocol handling and .gcode is only appended when it's needed.
|
2020-07-09 10:37:14 +02:00 |
|
Knutwurst
|
73c98e400b
|
Rework touchscreen handling.
|
2020-07-08 18:28:07 +02:00 |
|
Knutwurst
|
73e750d697
|
First working implementation of the special menu for the Mega X touchscreen.
|
2020-07-07 12:30:43 +02:00 |
|
Knutwurst
|
f6836ebdcb
|
Add correct Version to TFT which supports it.
|
2020-07-06 13:37:28 +02:00 |
|
Knutwurst
|
b0095e511c
|
Update print bed size so gain a max of 220x225x210, which is within the limits of the hardware.
|
2020-07-03 13:05:06 +02:00 |
|
Knutwurst
|
0b2ea96958
|
- Hotend reheat fix
- Change default E steps for S Extruder
|
2020-06-27 22:45:26 +02:00 |
|
Knutwurst
|
759e42beac
|
Bump Version to 1.0.5
|
2020-06-21 16:55:26 +02:00 |
|
Knutwurst
|
db6707d78e
|
Fix issue #1 where M600 did not work. Also implemented advanced pause and parging feature and fixed bug, which prevents resuming from pared nozzle.
|
2020-06-21 12:52:21 +02:00 |
|
Knutwurst
|
e7731a4b72
|
Add startup chime, endstop beep and extremely annoying thermal runaway warning sound, since the touchscreen can not display an error message.
|
2020-06-15 11:01:40 +02:00 |
|
Knutwurst
|
e04691b248
|
- Code cleanup
- Bump version to 1.0.5-prerelease
|
2020-06-14 17:47:42 +02:00 |
|
Knutwurst
|
fb801fb3ec
|
Some file dialog fixes regarding too long filenames and special menu
|
2020-06-14 14:06:33 +02:00 |
|
Knutwurst
|
d656a841b7
|
Trigorilla Board selection fix, thanks to Daniel Epp. This is necessary if you want to use a BLTouch sensor in thins setup.
|
2020-06-12 12:02:16 +02:00 |
|
Knutwurst
|
d090049594
|
Take anycubic's approach to implement power outage support. SD card wearing can be prevented by disabling it via POWER_OUTAGE_TEST flag.
|
2020-06-11 15:36:23 +02:00 |
|
Knutwurst
|
a52dc3c7e9
|
Smaller buffersize for serial communication between touchscreen and mainboard because it's not needed anymore.
|
2020-06-09 16:12:12 +02:00 |
|
Knutwurst
|
f16f964ab3
|
Tweak annoying keepalive interval
|
2020-06-09 16:09:44 +02:00 |
|
Knutwurst
|
f78522d3bd
|
Restore leveling state after G28
|
2020-06-09 16:05:14 +02:00 |
|
Knutwurst
|
c5b7370b87
|
Reenable babystepping, linear advance and disable ARC support.
|
2020-06-09 11:51:03 +02:00 |
|
Knutwurst
|
a0cba42b41
|
Update README.md with some images.
|
2020-06-07 13:10:39 +02:00 |
|
Knutwurst
|
d772a6abac
|
Add exit to default page in special menu.
|
2020-06-07 09:40:56 +02:00 |
|
Knutwurst
|
b9a135b6af
|
Bump version number for next release.
|
2020-06-07 09:31:56 +02:00 |
|
Knutwurst
|
8ea2ae36ad
|
Add 0.02 and 0.01 Z-Stepping for mesh leveling purpose.
|
2020-06-07 09:27:31 +02:00 |
|
Knutwurst
|
eaf291bf05
|
Bugfix for nozzle positioning via touchscreen, which was absolute instead of relative.
|
2020-06-06 23:55:40 +02:00 |
|
Knutwurst
|
3bbe852b3e
|
Bump Version to 1.0.3 for next release
|
2020-06-06 23:08:31 +02:00 |
|
Knutwurst
|
fb927ee602
|
Optimized MEGA S extruder feedrate and acceleration values.
|
2020-06-06 23:04:49 +02:00 |
|
Knutwurst
|
f93857edb1
|
Filament runout sensor can be disabled via special menu.
|
2020-06-06 21:51:19 +02:00 |
|
Knutwurst
|
b6ad592a8d
|
Automatically initialize EEPROM on any errors.
|
2020-06-06 20:13:26 +02:00 |
|
Knutwurst
|
e1ca8ee7b3
|
Bump Version to 1.0.2
|
2020-06-06 14:38:56 +02:00 |
|
Knutwurst
|
a11043e5bc
|
Bugfixes for almost every common Touchscreen problem, regarding freezes and lockups by substituting the GCodeQueue.enqueue_now_P method with the correct inject function, which also clears the current queue and ensures, our command is processed.
|
2020-06-06 14:32:04 +02:00 |
|
Knutwurst
|
a3b291f1cf
|
Disable advanced pause feature, because resume does not work reliably.
|
2020-06-06 13:51:17 +02:00 |
|
Knutwurst
|
0486080289
|
- Remove unneccessary bed heating information.
- Disable debug information via serial console.
|
2020-06-06 12:53:11 +02:00 |
|
Knutwurst
|
fafc91bea1
|
Add config switch defines for automated releases.
|
2020-06-06 01:03:30 +02:00 |
|
Knutwurst
|
3ddbe448ae
|
Reset print-timer after print stop.
|
2020-06-06 00:28:45 +02:00 |
|
Knutwurst
|
c77a32a674
|
Bugfix for dumb wiggeling after stopping SD print.
|
2020-06-06 00:17:24 +02:00 |
|
Knutwurst
|
138cd29322
|
Add loud alternating beep to thermal runaway protection.
|
2020-06-05 09:01:54 +02:00 |
|
Knutwurst
|
bead7ef70b
|
Add PID ending beep.
|
2020-06-05 08:50:07 +02:00 |
|
Knutwurst
|
bbd2b97133
|
Add automatic filament change function with touchscreen controls.
|
2020-06-05 08:30:14 +02:00 |
|
Knutwurst
|
943f19ecff
|
Add G26 mesh leveling routines.
|
2020-06-04 19:23:05 +02:00 |
|
Knutwurst
|
c0035b40c0
|
Bed heating status messages.
|
2020-06-04 18:57:44 +02:00 |
|