Update Version to 1.1.4 Release

Update README.md
2020-08-24 11:07:00 +02:00 · 2020-08-24 08:21:52 +02:00 · 2020-08-24 08:20:28 +02:00 · 2020-08-23 22:00:28 +02:00 · 2020-08-23 18:40:08 +02:00 · 2020-08-23 17:19:15 +02:00
38 changed files with 228 additions and 125 deletions
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -43,18 +43,24 @@
 //#define ANYCUBIC_TFT_DEBUG
 //#define POWER_OUTAGE_TEST

-/*****************************************************************************************
- *                                                                                       *
- *                                                                                       *
- *   WARNING:                                                                            *
- *   THE FOLLOWING SETTINGS ARE NORMALLY SET BY PLATFORMIO!                              *
- *                                                                                       *
- *   IF YOU CHANGE THEM WITHIN THE SOURCECODE, DO NOT COMMIT                             *
- *   TO MASTER BRANCH OR BUILD WITH PLATFORMIO ENVIRONMENT!                              *
- *   OTHERWISE SOME SETTINGS MIGHT BE OVERWRITTEN AND YOU END                            *
- *   UP WITH A NON FUNCTIONING FIRMWARE!                                                 *
- *                                                                                       *
- * ***************************************************************************************/
+/*******************************************************************************************
+ **                                                                                       **
+ **                                                                                       **
+ **   WARNING:                                                                            **
+ **   THE FOLLOWING SETTINGS ARE NORMALLY SET BY PLATFORMIO!                              **
+ **                                                                                       **
+ **   IF YOU CHANGE THEM WITHIN THE SOURCECODE, DO NOT COMMIT                             **
+ **   TO MASTER BRANCH OR BUILD WITH PLATFORMIO ENVIRONMENT!                              **
+ **   OTHERWISE SOME SETTINGS MIGHT BE OVERWRITTEN AND YOU END                            **
+ **   UP WITH A NON FUNCTIONING FIRMWARE!                                                 **
+ **                                                                                       **
+ **   If you want to select a specific configuration for your                             **
+ **   printer, just open the PlatformIO tab on the left, select                           **
+ **   PROJECT TASKS and then "env:i3_MEGA*" (your desired config)                         **
+ **   From there you can build and upload your code.                                      **
+ **                                                                                       **
+ **                                                                                       **
+ *******************************************************************************************/
 

 /*
@@ -64,6 +70,9 @@
 * MEGA is the normal i3 Version without spool holder and the cassic extruder
 * MEGA_S is the S version with Titan clone extruder
 * MEGA_X is the big version with 310x310mm Bed
+ * 
+ * PLEASE READ THE WARNING ABOVE!
+ * 
 */
 //#define KNUTWURST_MEGA
 //#define KNUTWURST_MEGA_S
@@ -74,6 +83,9 @@
 * you have the "new" Mega S with the blue/yellow
 * Touchscreen display, you need to enable the
 * DGUS2 switch to get the special menu to work
+ * 
+ * PLEASE READ THE WARNING ABOVE!
+ * 
 */
 //#define KNUTWURST_DGUS2_TFT

@@ -81,6 +93,8 @@
 * Enable Support for Trinamic Stepper drivers.
 * This also inverts the X,Y,Z and Extruder motor
 * outputs/directions.
+ * 
+ * PLEASE READ THE WARNING ABOVE!
 */
 //#define KNUTWURST_TMC

@@ -90,6 +104,9 @@
 * special menu. It also removes all manual 
 * leveling features because they are not 
 * neccessary at all.
+ * 
+ * PLEASE READ THE WARNING ABOVE!
+ * 
 */
 //#define KNUTWURST_BLTOUCH // see <https://github.com/DerDominik/Marlin-AnycubicI3Mega-BLTouch/wiki/Aufbauplan_BLTouch>

@@ -98,22 +115,31 @@
 * It enabled more console output and should be
 * disabled in production. It can cause the
 * printer to stutter.
+ * 
+ * PLEASE READ THE WARNING ABOVE!
+ * 
 */
 //#define KNUTWURST_DEBUG


-/*****************************************************************************************
- *                                                                                       *
- *                                                                                       *
- *   WARNING:                                                                            *
- *   THE SETTINGS ABOVE ARE NORMALLY SET BY PLATFORMIO!                                  *
- *                                                                                       *
- *   IF YOU CHANGE THEM WITHIN THE SOURCECODE, DO NOT COMMIT                             *
- *   TO MASTER BRANCH OR BUILD WITH PLATFORMIO ENVIRONMENT!                              *
- *   OTHERWISE SOME SETTINGS MIGHT BE OVERWRITTEN AND YOU END                            *
- *   UP WITH A NON FUNCTIONING FIRMWARE!                                                 *
- *                                                                                       *
- * ***************************************************************************************/
+/*******************************************************************************************
+ **                                                                                       **
+ **                                                                                       **
+ **   WARNING:                                                                            **
+ **   THE SETTINGS ABOVE ARE NORMALLY SET BY PLATFORMIO!                                  **
+ **                                                                                       **
+ **   IF YOU CHANGE THEM WITHIN THE SOURCECODE, DO NOT COMMIT                             **
+ **   TO MASTER BRANCH OR BUILD WITH PLATFORMIO ENVIRONMENT!                              **
+ **   OTHERWISE SOME SETTINGS MIGHT BE OVERWRITTEN AND YOU END                            **
+ **   UP WITH A NON FUNCTIONING FIRMWARE!                                                 **
+ **                                                                                       **
+ **   If you want to select a specific configuration for your                             **
+ **   printer, just open the PlatformIO tab on the left, select                           **
+ **   PROJECT TASKS and then "env:i3_MEGA*" (your desired config)                         **
+ **   From there you can build and upload your code.                                      **
+ **                                                                                       **
+ **                                                                                       **
+ *******************************************************************************************/


 /*
@@ -889,15 +915,15 @@
 *                                      X, Y, Z, E0 [, E1[, E2...]]
 */
 #if ENABLED(KNUTWURST_MEGA)
-    #define DEFAULT_MAX_FEEDRATE          { 500, 500, 6, 60 }
+    #define DEFAULT_MAX_FEEDRATE          { 500, 500, 8, 60 }
 #endif

 #if ENABLED(KNUTWURST_MEGA_S)
-    #define DEFAULT_MAX_FEEDRATE          { 500, 500, 6, 30 }
+    #define DEFAULT_MAX_FEEDRATE          { 500, 500, 8, 30 }
 #endif

 #if ENABLED(KNUTWURST_MEGA_X)
-    #define DEFAULT_MAX_FEEDRATE            { 120, 120, 20, 80 }
+    #define DEFAULT_MAX_FEEDRATE            { 120, 120, 8, 80 } // { 120, 120, 20, 80 }
 #endif


@@ -913,7 +939,16 @@
 * Override with M201
 *                                      X, Y, Z, E0 [, E1[, E2...]]
 */
-#define DEFAULT_MAX_ACCELERATION      { 3000, 2000,  60, 10000 }
+#if EITHER(KNUTWURST_MEGA, KNUTWURST_MEGA_S)
+    #define DEFAULT_MAX_ACCELERATION      { 3000, 2000,  60, 10000 }
+#endif
+
+#if ENABLED(KNUTWURST_MEGA_X)
+    #define DEFAULT_MAX_ACCELERATION      { 400, 400, 60, 10000 }
+#endif
+
+
+

 //#define LIMITED_MAX_ACCEL_EDITING     // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
 #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
@@ -956,10 +991,31 @@
 * value set here, it may happen instantaneously.
 */
 //#define CLASSIC_JERK
+
+// I Know.. it's useless to put it here ;)
+#if EITHER(KNUTWURST_MEGA, KNUTWURST_MEGA_S)
+    //#define CLASSIC_JERK
+#endif
+
+#if ENABLED(KNUTWURST_MEGA_X)
+    //#define CLASSIC_JERK
+#endif
+
 #if ENABLED(CLASSIC_JERK)
-  #define DEFAULT_XJERK  10.0
-  #define DEFAULT_YJERK  10.0
-  #define DEFAULT_ZJERK  0.4
+
+#if EITHER(KNUTWURST_MEGA, KNUTWURST_MEGA_S)
+    #define DEFAULT_XJERK  10.0
+    #define DEFAULT_YJERK  10.0
+    #define DEFAULT_ZJERK  0.4
+#endif
+
+#if ENABLED(KNUTWURST_MEGA_X)
+    #define DEFAULT_XJERK  4.0
+    #define DEFAULT_YJERK  4.0
+    #define DEFAULT_ZJERK  0.2
+#endif
+
+

  //#define TRAVEL_EXTRA_XYJERK 0.0     // Additional jerk allowance for all travel moves

@@ -969,7 +1025,13 @@
  #endif
 #endif

-#define DEFAULT_EJERK    5.0  // May be used by Linear Advance
+#if EITHER(KNUTWURST_MEGA, KNUTWURST_MEGA_S)
+    #define DEFAULT_EJERK    5.0  // May be used by Linear Advance
+#endif
+
+#if ENABLED(KNUTWURST_MEGA_X)
+    #define DEFAULT_EJERK    8.0  // May be used by Linear Advance
+#endif

 /**
 * Junction Deviation Factor
@@ -979,7 +1041,13 @@
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 #if DISABLED(CLASSIC_JERK)
-  #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge
+    #if EITHER(KNUTWURST_MEGA, KNUTWURST_MEGA_S)
+        #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge
+    #endif
+
+    #if ENABLED(KNUTWURST_MEGA_X)
+        #define JUNCTION_DEVIATION_MM 0.16 // (mm) Distance from real junction edge
+    #endif
 #endif

 /**
@@ -1152,10 +1220,10 @@

 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
-#define MIN_PROBE_EDGE 10
+#define MIN_PROBE_EDGE 30

 // X and Y axis travel speed (mm/m) between probes
-#define XY_PROBE_SPEED 3600
+#define XY_PROBE_SPEED 8000

 // Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
@@ -1606,9 +1674,18 @@
  #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2)    // Y point for Z homing when homing all axes (G28).
 #endif

-// Homing speeds (mm/m)
-#define HOMING_FEEDRATE_XY (50*60)
-#define HOMING_FEEDRATE_Z  (4*60)
+#if EITHER(KNUTWURST_MEGA, KNUTWURST_MEGA_S)
+    // Homing speeds (mm/m)
+    #define HOMING_FEEDRATE_XY (50*60)
+    #define HOMING_FEEDRATE_Z  (5*60)
+#endif
+
+#if ENABLED(KNUTWURST_MEGA_X)
+    // Homing speeds (mm/m)
+    #define HOMING_FEEDRATE_XY (40*60)
+    #define HOMING_FEEDRATE_Z  (6*60)
+#endif
+

 // Validate that endstops are triggered on homing moves
 #define VALIDATE_HOMING_ENDSTOPS
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -681,7 +681,7 @@
   * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
   * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
   */
-  //#define BLTOUCH_HS_MODE
+  #define BLTOUCH_HS_MODE

  // Safety: Enable voltage mode settings in the LCD menu.
  //#define BLTOUCH_LCD_VOLTAGE_MENU
--- a/Marlin/src/core/language.h
+++ b/Marlin/src/core/language.h
@@ -126,7 +126,7 @@
 #define STR_INVALID_E_STEPPER               "Invalid E stepper"
 #define STR_E_STEPPER_NOT_SPECIFIED         "E stepper not specified"
 #define STR_INVALID_SOLENOID                "Invalid solenoid"
-#define STR_M115_REPORT                     "FIRMWARE_NAME:Marlin " DETAILED_BUILD_VERSION " MARLIN-AI3M_VERSION:" CUSTOM_BUILD_VERSION " SOURCE_CODE_URL:" SOURCE_CODE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID
+#define STR_M115_REPORT                     "FIRMWARE_NAME:Marlin " DETAILED_BUILD_VERSION " KNUTWURST_AI3M_VERSION:" CUSTOM_BUILD_VERSION " DISTRIBUTION_DATE:" STRING_DISTRIBUTION_DATE " SOURCE_CODE_URL:" SOURCE_CODE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID
 #define STR_MARLIN_AI3M                     "Marlin-AI3M"
 #define STR_COUNT_X                         " Count X:"
 #define STR_COUNT_A                         " Count A:"
--- a/Marlin/src/inc/Version.h
+++ b/Marlin/src/inc/Version.h
@@ -41,10 +41,11 @@
 * here we define this default string as the date where the latest release
 * version was tagged.
 */
- #define CUSTOM_BUILD_VERSION "1.1.1"
+ #define CUSTOM_BUILD_VERSION "1.1.4"

 #ifndef STRING_DISTRIBUTION_DATE
-  #define STRING_DISTRIBUTION_DATE "2020-07-09"
+  //#define STRING_DISTRIBUTION_DATE "2020-07-09"
+  #define STRING_DISTRIBUTION_DATE "2020-08-24"
 #endif

 /**
--- a/Marlin/src/lcd/anycubic_touchscreen.cpp
+++ b/Marlin/src/lcd/anycubic_touchscreen.cpp
@@ -447,13 +447,21 @@ void AnycubicTouchscreenClass::HandleSpecialMenu()
  || (strcasestr(currentTouchscreenSelection, SM_PID_HOTEND_S) != NULL))
  {
    SERIAL_ECHOLNPGM("Special Menu: PID Tune Hotend");
-    queue.inject_P(PSTR("M106 S204\nM303 E0 S210 C15 U1"));
+    queue.inject_P(PSTR("G28\nG90\nG1 Z20\nG1 X110 Y110 F4000\nG1 Z5\nM106 S172\nG4 P500\nM303 E0 S215 C15 U1\nG4 P500\nM107\nG28\nG1 Z10\nM84"));
+    buzzer.tone(200, 1108);
+    buzzer.tone(200, 1661);
+    buzzer.tone(200, 1108);
+    buzzer.tone(600, 1661);
  }
  else if ((strcasestr(currentTouchscreenSelection, SM_PID_BED_L) != NULL)
  || (strcasestr(currentTouchscreenSelection, SM_PID_BED_S) != NULL))
  {
    SERIAL_ECHOLNPGM("Special Menu: PID Tune Ultrabase");
    queue.inject_P(PSTR("M303 E-1 S60 C6 U1"));
+    buzzer.tone(200, 1108);
+    buzzer.tone(200, 1661);
+    buzzer.tone(200, 1108);
+    buzzer.tone(600, 1661);
  }
  else if ((strcasestr(currentTouchscreenSelection, SM_SAVE_EEPROM_L) != NULL)
  || (strcasestr(currentTouchscreenSelection, SM_SAVE_EEPROM_S) != NULL))
@@ -519,17 +527,15 @@ void AnycubicTouchscreenClass::HandleSpecialMenu()
  || (strcasestr(currentTouchscreenSelection, SM_Z_UP_001_S) != NULL))
  {
    SERIAL_ECHOLNPGM("Special Menu: Z Up 0.01");
-    queue.inject_P(PSTR("G91\nG1 Z+0.01\nG90"));
    //queue.inject_P(PSTR("G91\nG1 Z+0.01\nG90"));
-    //queue.inject_P(PSTR("G91\nG1 Z-0.02\nG90"));
+    queue.inject_P(PSTR("G91\nG1 Z+0.03\nG4 P250\nG1 Z-0.02\nG90"));
  }
  else if ((strcasestr(currentTouchscreenSelection, SM_Z_DN_001_L) != NULL)
-  || (strcasestr(currentTouchscreenSelection, SM_Z_DN_001_L) != NULL))
+  || (strcasestr(currentTouchscreenSelection, SM_Z_DN_001_S) != NULL))
  {
    SERIAL_ECHOLNPGM("Special Menu: Z Down 0.01");
-    queue.inject_P(PSTR("G91\nG1 Z-0.01\nG90"));
-    //queue.inject_P(PSTR("G91\nG1 Z+0.02\nG90"));
-    //queue.inject_P(PSTR("G91\nG1 Z-0.03\nG90"));
+    //queue.inject_P(PSTR("G91\nG1 Z-0.01\nG90"));
+    queue.inject_P(PSTR("G91\nG1 Z+0.02\nG4 P250\nG1 Z-0.03\nG90"));
  }
 #endif

@@ -538,7 +544,7 @@ void AnycubicTouchscreenClass::HandleSpecialMenu()
  || (strcasestr(currentTouchscreenSelection, SM_BLTOUCH_S) != NULL))
  {
    SERIAL_ECHOLNPGM("Special Menu: BLTouch Leveling");
-    queue.inject_P(PSTR("G28\nG29\nM500\nG90\nG1 X0 Z30 F4000\nG91"));
+    queue.inject_P(PSTR("G28\nG29\nM500\nG90\nG1 Z30 F4000\nG1 X0 F4000\nG91\nM84"));
  }
 #endif

@@ -725,8 +731,8 @@ void AnycubicTouchscreenClass::PrintList()
        
        // Cut off too long filenames.
        // They don't fit on the screen anyways.
-        if(fileNameLen > MAX_PRINTABLE_FILENAME_LEN)
-          fileNameLen = MAX_PRINTABLE_FILENAME_LEN;
+        //if(fileNameLen > MAX_PRINTABLE_FILENAME_LEN)
+        //  fileNameLen = MAX_PRINTABLE_FILENAME_LEN;
        
        char outputString[fileNameLen];

@@ -784,7 +790,8 @@ void AnycubicTouchscreenClass::PrintList()
 #endif
  else
  {
-    // Do nothing?
+    HARDWARE_SERIAL_PROTOCOLLNPGM(SM_SPECIAL_MENU_S);
+    HARDWARE_SERIAL_PROTOCOLLNPGM(SM_SPECIAL_MENU_L);
  }
 }

@@ -1077,6 +1084,8 @@ void AnycubicTouchscreenClass::GetCommandFromTFT()
    
          if( (int)(strtod(&TFTcmdbuffer[TFTbufindw][TFTstrchr_pointer - TFTcmdbuffer[TFTbufindw] + 1], NULL)) != checksum)
          {
+              HARDWARE_SERIAL_ERROR_START;
+              HardwareSerial.flush();
              HARDWARE_SERIAL_ERROR_START;
              HardwareSerial.flush();
              serial3_count = 0;
@@ -1172,7 +1181,7 @@ void AnycubicTouchscreenClass::GetCommandFromTFT()
            }
            else
            {
-              HARDWARE_SERIAL_PROTOCOLPGM("J02");
+              HARDWARE_SERIAL_PROTOCOLPGM("J02");  // J02 SD Card initilized
            }
          }
          else
@@ -1208,20 +1217,19 @@ void AnycubicTouchscreenClass::GetCommandFromTFT()
          currentTouchscreenSelection[0] = 0;
          if (!IS_SD_INSERTED())
          {
-            HARDWARE_SERIAL_PROTOCOLPGM("J02");
-            HARDWARE_SERIAL_ENTER();
-          }
-          else
-          {
-            if (CodeSeen('S'))
-              filenumber = CodeValue();
-              
-            HARDWARE_SERIAL_PROTOCOLPGM("FN "); // Filelist start
-            HARDWARE_SERIAL_ENTER();
-            PrintList();
-            HARDWARE_SERIAL_PROTOCOLPGM("END"); // Filelist stop
+            HARDWARE_SERIAL_PROTOCOLPGM("J02");  // J02 SD Card initilized
            HARDWARE_SERIAL_ENTER();
          }
+          
+          if (CodeSeen('S'))
+            filenumber = CodeValue();
+            
+          HARDWARE_SERIAL_PROTOCOLPGM("FN "); // Filelist start
+          HARDWARE_SERIAL_ENTER();
+          PrintList();
+          HARDWARE_SERIAL_PROTOCOLPGM("END"); // Filelist stop
+          HARDWARE_SERIAL_ENTER();
+          
 #endif
          break;
        case 9: // A9 pause sd print
@@ -1638,6 +1646,7 @@ void AnycubicTouchscreenClass::GetCommandFromTFT()
        case 33: // A33 get version info
        {
          HARDWARE_SERIAL_PROTOCOLPGM("J33 ");
+          HARDWARE_SERIAL_PROTOCOLPGM("Knutwurst-");
          HARDWARE_SERIAL_PROTOCOLPGM(MSG_MY_VERSION);
          HARDWARE_SERIAL_ENTER();
        }
--- a/Marlin/src/lcd/anycubic_touchscreen.h
+++ b/Marlin/src/lcd/anycubic_touchscreen.h
@@ -90,7 +90,7 @@ char *ftostr32(const float &);
 #endif

 #if ENABLED(KNUTWURST_DGUS2_TFT)
-#define SM_DIR_UP_L           "<<<<<<.gcode"
+#define SM_DIR_UP_L           "<<< BACK <<<.gcode"
 #define SM_DIR_UP_S           "DIR_UP~1.GCO"
 #define SM_SPECIAL_MENU_L     "<Special Menu>.gcode"
 #define SM_SPECIAL_MENU_S     "<SPECI~1.GCO"
--- a/README.md
+++ b/README.md
@@ -1,4 +1,4 @@
-# Knutwurst's i3 MEGA (M/S/X) Firmware (based on Marlin 2.0.5.4)
+# Knutwurst's i3 MEGA (M/S/X) Firmware <br>(based on Marlin 2.0.x)

 <span style="color: red;">(BITTE GENAU DURCHLESEN! / PLEASE READ CAREFULLY!)</span>

@@ -12,7 +12,6 @@
 # Inhaltsverzeichnis (Deutsch)
 - [Funktionen](#funktionen)
   - [Was ist besser?](#besser-im-vergleich-zu-anderen-firmwares-bugfixes)
-   - [Bekannte Bugs](#bekannte-bugs)
 - [Häufig gestellte Fragen (FAQ)](#häufig-gesellte-fragen-faq)
 - [Fotos / Bilder](#bilder)
   - [Spezial Menü](#spezial-menü)
@@ -22,11 +21,10 @@


 # Table of Contets (english)
- [Features](#faq)
-   - [What's better?](#faq)
-   - [Known Bugs](#faq)
+- [Features](#features)
+   - [What's better?](#whats-better-in-coparison-to-other-firmwares-bug-fixes)
 - [Frequently asked questions (FAQ)](#faq)
- [Photos / Pictures](#bilder)
+- [Photos / Pictures](#pictures)
   - [Special Menü](#special-menu)
   - [Manual Mesh Beld Leveling](#manual-mesh-beld-leveling)
   - [BLTouch Beld Leveling](#bltouch-beld-leveling)
@@ -37,7 +35,7 @@

 ## Funktionen

- * Mesh-Bed Kalibrierung / Autokalibrierung mit BLTouch
+ * Mesh-Bed Kalibrierung / Autokalibrierung mit [BLTouch (Installations-Anleitung)](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/BLTouch-Installation-(deutsch))
 * S-Kurven Beschleunigung
 * "Juction Deviation" statt des klassischen "Jerk" 
 * "Linear Pressure Control v1.5" aktiviert (kann mit M900 konfiguriert werden)
@@ -51,8 +49,9 @@
 * Automatische EEPROM Initialisierung
 * Filament Runout Sensor kann im Menü temporär deaktiviert werden
 * Wiederaufnahme des Drucks nach Stromausfall (WiP)
- * Druckbettgröße erweitert auf 220 x 225 x 210 mm
+ * [Druckbettgröße erweitert auf 225 x 220 x 210 mm](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/Set-new-print-bed-size)
 * Automatischer 'Slowdown', falls Daten nicht schnell genug fließen
+ * Vollautomatisches Hotend und Ultrabase PID Tuning


 ## Besser im Vergleich zu anderen Firmwares (Bugfixes):
@@ -67,6 +66,8 @@
 * Kein Aufhängen, wenn das Filament leer ist
 * Keine "spezielle" BLTouch Firmware nötig. Hier ist alles drin
 * Konfiguration ganz einfach über Feature-Toggles
+ * Man muss keine Grundkonfiguration per GCODE machen.
+ * Man muss kein Werksreset durchführen

 ---

@@ -188,11 +189,11 @@ Für (fast) jede Kombination gibt es eine passende Firmware im Download-Bereich.

 ## Features:

- * Mesh bed calibration / Auto calibration with BLTouch
+ * Mesh bed calibration / Auto calibration with [BLTouch (Installation Manual)](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/BLTouch-Installation-(english))
 * S-curve acceleration
 * "Juction Deviation" instead of the classic "Jerk"
- * "Linear Pressure Control v1.5" enabled (can be configured with M900)
- * Baby stepping during printing
+ * "Linear Pressure Control v1.5" activated (can be configured with M900)
+ * Baby stepping during the printing process
 * Bilinear Bed Leveling (BBL)
 * Manual editing of the measuring points
 * Full Anycubic touchscreen support
@@ -200,10 +201,11 @@ Für (fast) jede Kombination gibt es eine passende Firmware im Download-Bereich.
 * Part cooling fan now runs at 100% instead of 70%
 * Pause & filament change function
 * Automatic EEPROM initialization
- * Filament Runout Sensor can be temporarily deactivated in the menu
- * Power outage support
- * Print bed size enlarged to 220 x 225 x 210 mm
- * Automatic slowdown in if the data is not received fast enough
+ * Filament runout sensor can be temporarily deactivated in the menu
+ * Resumption of printing after a power failure (WiP)
+ * [Print bed size enlarged to 225 x 220 x 210 mm](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/Set-new-print-bed-size)
+ * Automatic 'slowdown' if data does not flow fast enough
+ * Fully automatic hotend and ultrabase PID tuning

 ### What's better in coparison to other firmwares (bug fixes):
 * Tidy special menu
--- a/deploy_firmware_files.sh
+++ b/deploy_firmware_files.sh
@@ -1,15 +1,23 @@
 #!/bin/bash

-CURRENT_VERSION="1.1.1"
+VERSION_FILE="/Users/OKoester/Documents/Arduino/Marlin-2-0-x-Anycubic-i3-MEGA-S-Master/Marlin/src/inc/Version.h"
 FIRMWARE_FOLDER="/Users/OKoester/Documents/Arduino/Marlin-2-0-x-Anycubic-i3-MEGA-S-Master/.pio/build/"
 OUTPUT_FOLDER="/Users/OKoester/Desktop/i3_FIRMWARE"

-mkdir $OUTPUT_FOLDER
+CUSTOM_BUILD_VERSION=$(egrep -o "([0-9]{1,}\.)+[0-9]{1,}" $VERSION_FILE -m2 | tail -n1)
+
+if [ -d "$$OUTPUT_FOLDER/v$CUSTOM_BUILD_VERSION" ]; then
+    echo "$$OUTPUT_FOLDER/$CUSTOM_BUILD_VERSION already exists."
+else 
+    mkdir $OUTPUT_FOLDER/$CUSTOM_BUILD_VERSION
+fi
+
+echo "Knutwurst's Mega Firmware Version: $CUSTOM_BUILD_VERSION"

 cd $FIRMWARE_FOLDER
-for dir in $FIRMWARE_FOLDER/*/     # list directories in the form "/tmp/dirname/"
+for dir in $FIRMWARE_FOLDER/*/
 do
-    dir=${dir%*/}      # remove the trailing "/"
-    echo ${dir##*/}    # print everything after the final "<--/"
-    cp ${dir##*/}/firmware.hex /$OUTPUT_FOLDER/${dir##*/}_v$CURRENT_VERSION.hex
+    dir=${dir%*/}
+    echo ${dir##*/}
+    cp ${dir##*/}/firmware.hex /$OUTPUT_FOLDER/$CUSTOM_BUILD_VERSION/${dir##*/}_v$CUSTOM_BUILD_VERSION.hex
 done
--- a/i3_mega_envs.ini
+++ b/i3_mega_envs.ini
@@ -14,7 +14,6 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-#extra_scripts     = pre:build_i3_mega.py
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA
 build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH

@@ -27,7 +26,6 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-#extra_scripts     = pre:build_i3_mega_tmc.py
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_TMC
 build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH

@@ -42,7 +40,6 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-#extra_scripts     = pre:build_i3_mega_s.py
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH

@@ -55,7 +52,6 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-#extra_scripts     = pre:build_i3_mega_s_dgus.py
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH

@@ -68,7 +64,6 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-#extra_scripts = pre:build_i3_mega_s_dgus_tmc.py
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_BLTOUCH

@@ -81,7 +76,6 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-#extra_scripts = pre:build_i3_mega_s_tmc.py
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_TMC
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH

@@ -96,9 +90,8 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-#extra_scripts = pre:build_i3_mega_s_tmc.py
-build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT



@@ -109,9 +102,8 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-#extra_scripts = pre:build_i3_mega_s_tmc.py
-build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_BLTOUCH
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_TMC
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT



@@ -129,7 +121,6 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-#extra_scripts     = pre:build_i3_mega.py
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC 

@@ -141,7 +132,6 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-#extra_scripts     = pre:build_i3_mega_tmc.py
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT 

@@ -153,7 +143,6 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-#extra_scripts     = pre:build_i3_mega_s.py
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC 

@@ -166,7 +155,6 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-#extra_scripts     = pre:build_i3_mega_s_dgus.py
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_TMC 

@@ -179,7 +167,6 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-#extra_scripts = pre:build_i3_mega_s_dgus_tmc.py
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X 

@@ -192,7 +179,6 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-#extra_scripts = pre:build_i3_mega_s_tmc.py
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT

@@ -204,9 +190,8 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-#extra_scripts = pre:build_i3_mega_s_tmc.py
-build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_TMC 
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_TMC -DKNUTWURST_DGUS2_TFT



@@ -217,9 +202,8 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-#extra_scripts = pre:build_i3_mega_s_tmc.py
-build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S 
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT


 ###########################################################
@@ -227,6 +211,10 @@ build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S
 #  BL Touch Configurations ( TRIGORILLA_14_11 )           #
 #                                                         #
 ###########################################################
+
+#
+#  i3 Mega (normal Version)
+#
 [env:i3_MEGA_BLTOUCH_11]
 platform          = atmelavr
 board             = megaatmega2560
@@ -234,7 +222,6 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-#extra_scripts     = pre:build_i3_mega.py
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC 

@@ -246,11 +233,13 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-#extra_scripts     = pre:build_i3_mega_tmc.py
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT 


+#
+#  i3 Mega S
+#
 [env:i3_MEGA_S_BLTOUCH_11]
 platform          = atmelavr
 board             = megaatmega2560
@@ -258,7 +247,6 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-#extra_scripts     = pre:build_i3_mega_s.py
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_S -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC 

@@ -271,7 +259,6 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-#extra_scripts     = pre:build_i3_mega_s_dgus.py
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_TMC 

@@ -284,7 +271,6 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-#extra_scripts = pre:build_i3_mega_s_dgus_tmc.py
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X 

@@ -297,11 +283,13 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-#extra_scripts = pre:build_i3_mega_s_tmc.py
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_S -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
 build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT 


+#
+#  i3 Mega X
+#
 [env:i3_MEGA_X_BLTOUCH_11]
 platform          = atmelavr
 board             = megaatmega2560
@@ -309,9 +297,8 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-#extra_scripts = pre:build_i3_mega_s_tmc.py
-build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_TMC 
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_X -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_TMC -DKNUTWURST_DGUS2_TFT



@@ -322,6 +309,5 @@ board_build.f_cpu = 16000000L
 lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
-#extra_scripts = pre:build_i3_mega_s_tmc.py
-build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S 
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT
--- a/images/1N4733.jpg
+++ b/images/1N4733.jpg
--- a/images/bed_size_cura.jpg
+++ b/images/bed_size_cura.jpg
--- a/images/bltouch_01.jpg
+++ b/images/bltouch_01.jpg
--- a/images/bltouch_02.jpg
+++ b/images/bltouch_02.jpg
--- a/images/bltouch_03.jpg
+++ b/images/bltouch_03.jpg
--- a/images/bltouch_04.jpg
+++ b/images/bltouch_04.jpg
--- a/images/bltouch_05.jpg
+++ b/images/bltouch_05.jpg
--- a/images/bltouch_06.jpg
+++ b/images/bltouch_06.jpg
--- a/images/bltouch_07.jpg
+++ b/images/bltouch_07.jpg
--- a/images/bltouch_08.jpg
+++ b/images/bltouch_08.jpg
--- a/images/bltouch_09.jpg
+++ b/images/bltouch_09.jpg
--- a/images/bltouch_10.jpg
+++ b/images/bltouch_10.jpg
--- a/images/bltouch_switch_cable.jpg
+++ b/images/bltouch_switch_cable.jpg
--- a/images/bltouch_wiring.jpg
+++ b/images/bltouch_wiring.jpg
--- a/images/bltouch_wiring_alt.jpg
+++ b/images/bltouch_wiring_alt.jpg
--- a/images/burnt_diode_closeup.jpg
+++ b/images/burnt_diode_closeup.jpg
--- a/images/burnt_stepper.jpg
+++ b/images/burnt_stepper.jpg
--- a/images/diode_closeup.jpg
+++ b/images/diode_closeup.jpg
--- a/images/mobo_with_stepperdrivers.jpg
+++ b/images/mobo_with_stepperdrivers.jpg
--- a/images/mobo_without_stepperdrivers.jpg
+++ b/images/mobo_without_stepperdrivers.jpg
--- a/images/new_diode_closeup.jpg
+++ b/images/new_diode_closeup.jpg
--- a/images/new_mobo_fans.jpg
+++ b/images/new_mobo_fans.jpg
--- a/images/printer_open.jpg
+++ b/images/printer_open.jpg
--- a/images/servo_futaba.jpg
+++ b/images/servo_futaba.jpg
--- a/images/servo_graupner.jpg
+++ b/images/servo_graupner.jpg
--- a/images/stepper_closeup.jpg
+++ b/images/stepper_closeup.jpg
--- a/images/stepper_vdd_gnd.jpg
+++ b/images/stepper_vdd_gnd.jpg
--- a/images/stepper_vmot_gnd.jpg
+++ b/images/stepper_vmot_gnd.jpg
--- a/platformio.ini
+++ b/platformio.ini
@@ -15,14 +15,34 @@
 # Remove '-fmax-errors=5' from build_flags below to see all.
 #

+
+
+# *******************************************************************************************
+# **                                                                                       **
+# **   If you want to select a specific configuration for your                             **
+# **   printer, just open the PlatformIO tab on the left, select                           **
+# **   PROJECT TASKS and then "env:i3_MEGA*" (your desired config)                         **
+# **   From there you can build and upload your code.                                      **
+# **                                                                                       **
+# *******************************************************************************************
+
 [platformio]
 src_dir      = Marlin
 boards_dir   = buildroot/share/PlatformIO/boards
 #default_envs = mega2560
-#default_envs = i3_MEGA_S_TMC
 extra_configs = i3_mega_envs.ini
 default_envs = i3_MEGA, i3_MEGA_TMC, i3_MEGA_S, i3_MEGA_S_DGUS, i3_MEGA_S_DGUS_TMC, i3_MEGA_S_TMC, i3_MEGA_X, i3_MEGA_X_TMC, i3_MEGA_BLTOUCH_10, i3_MEGA_TMC_BLTOUCH_10, i3_MEGA_S_BLTOUCH_10, i3_MEGA_S_DGUS_BLTOUCH_10, i3_MEGA_S_DGUS_TMC_BLTOUCH_10, i3_MEGA_S_TMC_BLTOUCH_10, i3_MEGA_X_BLTOUCH_10, i3_MEGA_X_TMC_BLTOUCH_10, i3_MEGA_BLTOUCH_11, i3_MEGA_TMC_BLTOUCH_11, i3_MEGA_S_BLTOUCH_11, i3_MEGA_S_DGUS_BLTOUCH_11, i3_MEGA_S_DGUS_TMC_BLTOUCH_11, i3_MEGA_S_TMC_BLTOUCH_11, i3_MEGA_X_BLTOUCH_11, i3_MEGA_X_TMC_BLTOUCH_11

+# *******************************************************************************************
+# **                                                                                       **
+# **   If you want to select a specific configuration for your                             **
+# **   printer, just open the PlatformIO tab on the left, select                           **
+# **   PROJECT TASKS and then "env:i3_MEGA*" (your desired config)                         **
+# **   From there you can build and upload your code.                                      **
+# **                                                                                       **
+# *******************************************************************************************
+
+

 [common]
 default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
Author	SHA1	Message	Date
Knutwurst	fb65790f4d	Update Version to 1.1.4 Release	2020-08-24 11:07:00 +02:00
Oliver Köster	f627c62df2	Update README.md	2020-08-24 08:21:52 +02:00
Oliver Köster	0c841d8d18	Update README.md	2020-08-24 08:20:28 +02:00
Knutwurst	e53792cbce	Fix Z Feedrate on Mega X	2020-08-23 22:00:28 +02:00
Knutwurst	d6a74a59dd	Fix typo.	2020-08-23 18:40:08 +02:00
Knutwurst	10987b38ba	A bit more to read ;)	2020-08-23 17:19:15 +02:00
Knutwurst	3f4825db12	Disable DGUS for Mega X with BLTouch on 1.1 Motherboard	2020-08-23 15:32:38 +02:00
Knutwurst	e9fbd33fbe	Add alternative solder point for BLTouch	2020-08-23 15:01:24 +02:00
Knutwurst	25c776aec3	Pictures of Stepper Test	2020-08-23 12:18:53 +02:00
Knutwurst	ef3a102902	More Images	2020-08-23 11:49:22 +02:00
Knutwurst	3fce6790fc	Add single picture of new fans	2020-08-23 11:42:21 +02:00
Knutwurst	b8cbfd7569	- Disable DGUS Fix for Mega X to switch to the better Special Menu - Bump Version to 1.1.4 Beta - Fix Special Menu Handling when no SD Card is present - Add Pictures for new WIKI Page - Set Classic jerk to 0.2 since this is needed for Mesh Leveling	2020-08-23 11:40:00 +02:00
Knutwurst	2ef275c95b	More default speeds from original MEGA_X_V1.2.6 Firmware	2020-08-22 21:19:48 +02:00
Knutwurst	98852f7164	Show Special Menu even if no SD card is inserted.	2020-08-22 15:07:43 +02:00
Knutwurst	810526e377	Some minor Touchscreen fixes	2020-08-22 14:44:01 +02:00
Knutwurst	f663765c7e	Add detailed Version Info for DGUS II.	2020-08-21 23:52:11 +02:00
Knutwurst	1ef285fa1d	Update README.md	2020-08-19 12:09:49 +02:00
Knutwurst	a35eba79cc	Revert "Update README.md" This reverts commit `8a3eef85b1`.	2020-08-19 12:07:49 +02:00
Oliver Köster	21d5e7ecf7	Update README.md	2020-08-19 12:04:33 +02:00
Oliver Köster	8a3eef85b1	Update README.md	2020-08-18 17:48:14 +02:00
Oliver Köster	1db797f7e3	Update README.md	2020-08-18 17:47:19 +02:00
Knutwurst	7872416018	Add Print Bed Size image	2020-08-18 17:41:47 +02:00
Knutwurst	87ba51d21f	Update README.md	2020-08-18 17:35:19 +02:00
Knutwurst	27c074ba25	Enable Junction Deviation for MEGA X	2020-08-17 16:40:50 +02:00
Oliver Köster	2c630117c1	Update README.md	2020-08-16 12:59:47 +02:00
Knutwurst	4e22347e8c	Update README.md	2020-08-16 12:17:13 +02:00
Knutwurst	fb22e90d6d	Fix z height when using hotend pid autotune	2020-08-16 12:10:01 +02:00
Knutwurst	14c90915b0	Set release Date	2020-08-16 12:02:15 +02:00
Knutwurst	f078706442	- Disable Stepper after Hotend PID Tuning - Bump version zu 1.1.3 Release - Finally Fix 0.01 Steps for manual leveling	2020-08-16 12:01:30 +02:00
Knutwurst	fe734e1152	- Lower max feedrate for Z on MEGA M and S - fully automatize PID tuning - Bump Version to 1.1.3-BETA	2020-08-15 22:30:42 +02:00
Knutwurst	4d5d068a99	Disable stepper motors after BLTouch leveling is done	2020-08-14 12:49:58 +02:00
Knutwurst	919814c0d7	Add official BLTouch cable switch image	2020-08-14 12:39:54 +02:00
Knutwurst	a4cd712b02	JunctionDeviation Params for Mega S/X	2020-08-14 09:56:23 +02:00
Knutwurst	6ffd8dd31d	Mega X Acceleration Fixes	2020-08-14 09:29:42 +02:00
Knutwurst	c1b3d4afec	Add images for Servo cables	2020-08-13 13:26:58 +02:00
Knutwurst	083894f518	Slower homing feedrate. It war too high for the Mega S	2020-08-13 12:41:12 +02:00
Knutwurst	81ed8a1d9f	Deployment Script with subfolders for each firmware version	2020-08-13 10:08:24 +02:00
Knutwurst	f91882400b	Bump Version to 1.1.2 for next Release	2020-08-13 09:32:14 +02:00
Knutwurst	abf7f93bda	Add Distribution Date to M115 Command	2020-08-13 08:30:26 +02:00
Knutwurst	bcc3964aed	Feature: Very fast BLTouch probing	2020-08-12 22:10:23 +02:00
Knutwurst	9c59d44e9f	DGUS2 TFT Bugfix when serial error occures	2020-08-12 20:05:09 +02:00
Knutwurst	e08673ac8d	Bugfix: Hotend Fan did not start up when starting PID tuning.	2020-08-12 16:22:55 +02:00
Oliver Köster	c1f9a5edaf	Update README.md	2020-08-12 14:07:00 +02:00
Oliver Köster	54caef61a4	Update README.md	2020-08-12 08:28:27 +02:00
Knutwurst	574357b47a	More BLTouch Images	2020-08-11 17:07:17 +02:00
Oliver Köster	9f76b31a19	Update README.md	2020-08-11 08:26:27 +02:00
Knutwurst	86ec69c1b0	Add bltouch wiring Image	2020-08-11 07:20:33 +02:00
Knutwurst	8d8d46a2b8	Add more information for developers	2020-08-11 06:50:24 +02:00
Knutwurst	b00040c25d	Improve deployment script	2020-08-10 17:14:23 +02:00