Bump version for next release

- Use serial out from progmem for debugging

.editorconfig

@@ -0,0 +1,19 @@
+# editorconfig.org
+root = true
+
+[{*.patch,syntax_test_*}]
+trim_trailing_whitespace = false
+
+[{*.c,*.cpp,*.h,*.ino}]
+charset = utf-8
+
+[{*.c,*.cpp,*.h,*.ino,Makefile}]
+trim_trailing_whitespace = true
+insert_final_newline = true
+end_of_line = lf
+indent_style = space
+indent_size = 2
+
+[{*.py,*.conf,*.sublime-project}]
+indent_style = tab
+indent_size = 4

.gitattributes

@@ -0,0 +1,21 @@
+# Set the default behavior, in case people don't have core.autocrlf set.
+* text=auto
+
+# Files with Unix line endings
+*.c   text eol=lf
+*.cpp text eol=lf
+*.h   text eol=lf
+*.ino text eol=lf
+*.py  text eol=lf
+*.sh  text eol=lf
+*.scad text eol=lf
+
+# Files with native line endings
+# *.sln text
+
+# Binary files
+*.png binary
+*.jpg binary
+*.fon binary
+*.bin binary
+*.woff binary

.github/workflows/build-all.yml

@@ -65,16 +65,28 @@ jobs:
          - MEGA_X_DGUS_BLT_11
          - MEGA_X_DGUS_TMC_BLT_10
          - MEGA_X_DGUS_TMC_BLT_11
-         - MEGA_P
-         - MEGA_P_TMC
-         - MEGA_P_BLT_10
-         - MEGA_P_BLT_11
-         - MEGA_P_TMC_BLT_10
-         - MEGA_P_TMC_BLT_11
+         - MEGA_P_DGUS
+         - MEGA_P_DGUS_TMC
+         - MEGA_P_DGUS_BLT_10
+         - MEGA_P_DGUS_BLT_11
+         - MEGA_P_DGUS_TMC_BLT_10
+         - MEGA_P_DGUS_TMC_BLT_11
          - CHIRON
          - CHIRON_TMC
          - CHIRON_DGUS
          - CHIRON_DGUS_TMC
+         - 4MAXP2
+         - 4MAXP2_TMC
+         - 4MAXP2_BLT_10
+         - 4MAXP2_BLT_11
+         - 4MAXP2_TMC_BLT_10
+         - 4MAXP2_TMC_BLT_11
+         - 4MAXP2_DGUS
+         - 4MAXP2_DGUS_TMC
+         - 4MAXP2_DGUS_BLT_10
+         - 4MAXP2_DGUS_BLT_11
+         - 4MAXP2_DGUS_TMC_BLT_10
+         - 4MAXP2_DGUS_TMC_BLT_11
 
     steps:
 

.gitignore

@@ -0,0 +1,173 @@
+#
+# Marlin 3D Printer Firmware
+# Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+#
+# Based on Sprinter and grbl.
+# Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <https://www.gnu.org/licenses/>.
+#
+
+# Generated files
+_Version.h
+bdf2u8g
+
+#
+# OS
+#
+applet/
+*.DS_Store
+
+#
+# Misc
+#
+*~
+*.orig
+*.rej
+*.bak
+*.idea
+*.s
+*.i
+*.ii
+*.swp
+tags
+
+#
+# C++
+#
+# Compiled Object files
+*.slo
+*.lo
+*.o
+*.obj
+*.ino.cpp
+
+# Precompiled Headers
+*.gch
+*.pch
+
+# Compiled Dynamic libraries
+*.so
+*.dylib
+*.dll
+
+# Fortran module files
+*.mod
+*.smod
+
+# Compiled Static libraries
+*.lai
+*.la
+*.a
+*.lib
+
+# Executables
+*.exe
+*.out
+*.app
+
+#
+# C
+#
+# Object files
+*.o
+*.ko
+*.obj
+*.elf
+
+# Precompiled Headers
+*.gch
+*.pch
+
+# Libraries
+*.lib
+*.a
+*.la
+*.lo
+
+# Shared objects (inc. Windows DLLs)
+*.dll
+*.so
+*.so.*
+*.dylib
+
+# Executables
+*.exe
+*.out
+*.app
+*.i*86
+*.x86_64
+*.hex
+
+# Debug files
+*.dSYM/
+*.su
+
+# PlatformIO files/dirs
+.pio*
+.pioenvs
+.piolibdeps
+.clang_complete
+.gcc-flags.json
+/lib/
+
+# Secure Credentials
+Configuration_Secure.h
+
+# Visual Studio
+*.sln
+*.vcxproj
+*.vcxproj.user
+*.vcxproj.filters
+Release/
+Debug/
+__vm/
+.vs/
+vc-fileutils.settings
+
+# Visual Studio Code
+.vscode
+.vscode/.browse.c_cpp.db*
+.vscode/c_cpp_properties.json
+.vscode/launch.json
+.vscode/*.db
+
+#Simulation
+imgui.ini
+eeprom.dat
+
+#cmake
+CMakeLists.txt
+src/CMakeLists.txt
+CMakeListsPrivate.txt
+
+# CLion
+cmake-build-*
+
+# Eclipse
+.project
+.cproject
+.pydevproject
+.settings
+.classpath
+
+# Python
+__pycache__
+
+# IOLogger logs
+*_log.csv
+
+# Simulation / Native
+eeprom.dat
+imgui.ini

LICENSE

@@ -3,7 +3,7 @@
                     GNU GENERAL PUBLIC LICENSE
                        Version 3, 29 June 2007
 
- Copyright (c) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Copyright (c) 2007 Free Software Foundation, Inc. <https://www.fsf.org/>
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
@@ -647,7 +647,7 @@ the "copyright" line and a pointer to where the full notice is found.
     GNU General Public License for more details.
 
     You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+    along with this program.  If not, see <https://www.gnu.org/licenses/>.
 
 Also add information on how to contact you by electronic and paper mail.
 
@@ -666,12 +666,11 @@ might be different; for a GUI interface, you would use an "about box".
   You should also get your employer (if you work as a programmer) or school,
 if any, to sign a "copyright disclaimer" for the program, if necessary.
 For more information on this, and how to apply and follow the GNU GPL, see
-<http://www.gnu.org/licenses/>.
+<https://www.gnu.org/licenses/>.
 
   The GNU General Public License does not permit incorporating your program
 into proprietary programs.  If your program is a subroutine library, you
 may consider it more useful to permit linking proprietary applications with
 the library.  If this is what you want to do, use the GNU Lesser General
 Public License instead of this License.  But first, please read
-<http://www.gnu.org/philosophy/why-not-lgpl.html>.
-
+<https://www.gnu.org/licenses/why-not-lgpl.html>.

Marlin/Marlin.ino

@@ -1,9 +1,8 @@
-/*
-================================================================================
+/*==============================================================================
 
   Marlin Firmware
 
-  (c) 2011-2019 MarlinFirmware
+  (c) 2011-2020 MarlinFirmware
   Portions of Marlin are (c) by their respective authors.
   All code complies with GPLv2 and/or GPLv3
 
@@ -12,30 +11,33 @@
 Greetings! Thank you for choosing Marlin 2 as your 3D printer firmware.
 
 To configure Marlin you must edit Configuration.h and Configuration_adv.h
-located in the root 'Marlin' folder. Check the config/examples folder to see if
-there's a more suitable starting-point for your specific hardware.
+located in the root 'Marlin' folder. Check our Configurations repository to
+see if there's a more suitable starting-point for your specific hardware.
 
 Before diving in, we recommend the following essential links:
 
 Marlin Firmware Official Website
 
-  - http://marlinfw.org/
+  - https://marlinfw.org/
     The official Marlin Firmware website contains the most up-to-date
     documentation. Contributions are always welcome!
 
 Configuration
 
+  - https://github.com/MarlinFirmware/Configurations
+    Example configurations for several printer models.
+
   - https://www.youtube.com/watch?v=3gwWVFtdg-4
     A good 20-minute overview of Marlin configuration by Tom Sanladerer.
     (Applies to Marlin 1.0.x, so Jerk and Acceleration should be halved.)
     Also... https://www.google.com/search?tbs=vid%3A1&q=configure+marlin
 
-  - http://marlinfw.org/docs/configuration/configuration.html
+  - https://marlinfw.org/docs/configuration/configuration.html
     Marlin's configuration options are explained in more detail here.
 
 Getting Help
 
-  - http://forums.reprap.org/list.php?415
+  - https://reprap.org/forum/list.php?415
     The Marlin Discussion Forum is a great place to get help from other Marlin
     users who may have experienced similar issues to your own.
 
@@ -45,9 +47,11 @@ Getting Help
 
 Contributing
 
-  - http://marlinfw.org/docs/development/contributing.html
+  - https://marlinfw.org/docs/development/contributing.html
     If you'd like to contribute to Marlin, read this first!
 
-  - http://marlinfw.org/docs/development/coding_standards.html
+  - https://marlinfw.org/docs/development/coding_standards.html
     Before submitting code get to know the Coding Standards.
-*/
+
+
+------------------------------------------------------------------------------*/

Marlin/Version.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -28,20 +28,20 @@
 /**
  * Marlin release version identifier
  */
-//#define SHORT_BUILD_VERSION "2.0.5.4"
+//#define SHORT_BUILD_VERSION "2.0.9.2"
 
 /**
  * Verbose version identifier which should contain a reference to the location
  * from where the binary was downloaded or the source code was compiled.
  */
-//#define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION " (Github)"
+//#define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION
 
 /**
  * The STRING_DISTRIBUTION_DATE represents when the binary file was built,
  * here we define this default string as the date where the latest release
  * version was tagged.
  */
-//#define STRING_DISTRIBUTION_DATE "2020-07-09"
+//#define STRING_DISTRIBUTION_DATE "2021-09-03"
 
 /**
  * Defines a generic printer name to be output to the LCD after booting Marlin.
@@ -54,7 +54,7 @@
  * has a distinct Github fork— the Source Code URL should just be the main
  * Marlin repository.
  */
-//#define SOURCE_CODE_URL "https://github.com/MarlinFirmware/Marlin"
+//#define SOURCE_CODE_URL "github.com/MarlinFirmware/Marlin"
 
 /**
  * Default generic printer UUID.
@@ -65,12 +65,12 @@
  * The WEBSITE_URL is the location where users can get more information such as
  * documentation about a specific Marlin release.
  */
-//#define WEBSITE_URL "http://marlinfw.org"
+//#define WEBSITE_URL "marlinfw.org"
 
 /**
  * Set the vendor info the serial USB interface, if changable
  * Currently only supported by DUE platform
  */
-//#define  USB_DEVICE_VENDOR_ID           0x0000
-//#define  USB_DEVICE_PRODUCT_ID          0x0000
-//#define  USB_DEVICE_MANUFACTURE_NAME    WEBSITE_URL
+//#define USB_DEVICE_VENDOR_ID           0x0000
+//#define USB_DEVICE_PRODUCT_ID          0x0000
+//#define USB_DEVICE_MANUFACTURE_NAME    WEBSITE_URL

Marlin/lib/readme.txt

@@ -33,4 +33,4 @@ PlatformIO will find your libraries automatically, configure preprocessor's
 include paths and build them.
 
 More information about PlatformIO Library Dependency Finder
-- http://docs.platformio.org/page/librarymanager/ldf.html
+- https://docs.platformio.org/page/librarymanager/ldf.html

Marlin/src/HAL/AVR/HAL.cpp

@@ -16,15 +16,21 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
-
 #ifdef __AVR__
 
 #include "../../inc/MarlinConfig.h"
 #include "HAL.h"
 
+#ifdef USBCON
+  DefaultSerial1 MSerial0(false, Serial);
+  #ifdef BLUETOOTH
+    BTSerial btSerial(false, bluetoothSerial);
+  #endif
+#endif
+
 // ------------------------
 // Public Variables
 // ------------------------
@@ -52,6 +58,15 @@ void HAL_init() {
   #endif
 }
 
+void HAL_reboot() {
+  #if ENABLED(USE_WATCHDOG)
+    while (1) { /* run out the watchdog */ }
+  #else
+    void (*resetFunc)() = 0;  // Declare resetFunc() at address 0
+    resetFunc();              // Jump to address 0
+  #endif
+}
+
 #if ENABLED(SDSUPPORT)
 
   #include "../../sd/SdFatUtil.h"

Marlin/src/HAL/AVR/HAL.h

@@ -14,7 +14,8 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
  */
 #pragma once
 
@@ -38,6 +39,19 @@
 #include <avr/interrupt.h>
 #include <avr/io.h>
 
+//
+// Default graphical display delays
+//
+#if F_CPU >= 20000000
+  #define CPU_ST7920_DELAY_1 150
+  #define CPU_ST7920_DELAY_2   0
+  #define CPU_ST7920_DELAY_3 150
+#elif F_CPU == 16000000
+  #define CPU_ST7920_DELAY_1 125
+  #define CPU_ST7920_DELAY_2   0
+  #define CPU_ST7920_DELAY_3 188
+#endif
+
 #ifndef pgm_read_ptr
   // Compatibility for avr-libc 1.8.0-4.1 included with Ubuntu for
   // Windows Subsystem for Linux on Windows 10 as of 10/18/2019
@@ -50,7 +64,11 @@
 // Defines
 // ------------------------
 
-//#define analogInputToDigitalPin(IO) IO
+// AVR PROGMEM extension for sprintf_P
+#define S_FMT "%S"
+
+// AVR PROGMEM extension for string define
+#define PGMSTR(NAM,STR) const char NAM[] PROGMEM = STR
 
 #ifndef CRITICAL_SECTION_START
   #define CRITICAL_SECTION_START()  unsigned char _sreg = SREG; cli()
@@ -60,16 +78,10 @@
 #define ENABLE_ISRS()  sei()
 #define DISABLE_ISRS() cli()
 
-// On AVR this is in math.h?
-//#define square(x) ((x)*(x))
-
 // ------------------------
 // Types
 // ------------------------
 
-typedef uint16_t hal_timer_t;
-#define HAL_TIMER_TYPE_MAX 0xFFFF
-
 typedef int8_t pin_t;
 
 #define SHARED_SERVOS HAS_SERVOS
@@ -83,43 +95,51 @@ typedef int8_t pin_t;
 
 // Serial ports
 #ifdef USBCON
-  #if ENABLED(BLUETOOTH)
-    #define MYSERIAL0 bluetoothSerial
-  #else
-    #define MYSERIAL0 Serial
-  #endif
-  #define NUM_SERIAL 1
-#else
-  #if !WITHIN(SERIAL_PORT, -1, 3)
-    #error "SERIAL_PORT must be from -1 to 3. Please update your configuration."
+  #include "../../core/serial_hook.h"
+  typedef ForwardSerial1Class< decltype(Serial) > DefaultSerial1;
+  extern DefaultSerial1 MSerial0;
+  #ifdef BLUETOOTH
+    typedef ForwardSerial1Class< decltype(bluetoothSerial) > BTSerial;
+    extern BTSerial btSerial;
   #endif
 
-  #define MYSERIAL0 customizedSerial1
+  #define MYSERIAL1 TERN(BLUETOOTH, btSerial, MSerial0)
+#else
+  #if !WITHIN(SERIAL_PORT, -1, 3)
+    #error "SERIAL_PORT must be from 0 to 3, or -1 for USB Serial."
+  #endif
+  #define MYSERIAL1 customizedSerial1
 
   #ifdef SERIAL_PORT_2
     #if !WITHIN(SERIAL_PORT_2, -1, 3)
-      #error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
-    #elif SERIAL_PORT_2 == SERIAL_PORT
-      #error "SERIAL_PORT_2 must be different than SERIAL_PORT. Please update your configuration."
+      #error "SERIAL_PORT_2 must be from 0 to 3, or -1 for USB Serial."
     #endif
-    #define MYSERIAL1 customizedSerial2
-    #define NUM_SERIAL 2
-  #else
-    #define NUM_SERIAL 1
+    #define MYSERIAL2 customizedSerial2
+  #endif
+
+  #ifdef SERIAL_PORT_3
+    #if !WITHIN(SERIAL_PORT_3, -1, 3)
+      #error "SERIAL_PORT_3 must be from 0 to 3, or -1 for USB Serial."
+    #endif
+    #define MYSERIAL3 customizedSerial3
   #endif
 #endif
 
-#ifdef DGUS_SERIAL_PORT
-  #if !WITHIN(DGUS_SERIAL_PORT, -1, 3)
-    #error "DGUS_SERIAL_PORT must be from -1 to 3. Please update your configuration."
-  #elif DGUS_SERIAL_PORT == SERIAL_PORT
-    #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT. Please update your configuration."
-  #elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
-    #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
+#ifdef MMU2_SERIAL_PORT
+  #if !WITHIN(MMU2_SERIAL_PORT, -1, 3)
+    #error "MMU2_SERIAL_PORT must be from 0 to 3, or -1 for USB Serial."
   #endif
-  #define DGUS_SERIAL internalDgusSerial
+  #define MMU2_SERIAL mmuSerial
+#endif
 
-  #define DGUS_SERIAL_GET_TX_BUFFER_FREE DGUS_SERIAL.get_tx_buffer_free
+#ifdef LCD_SERIAL_PORT
+  #if !WITHIN(LCD_SERIAL_PORT, -1, 3)
+    #error "LCD_SERIAL_PORT must be from 0 to 3, or -1 for USB Serial."
+  #endif
+  #define LCD_SERIAL lcdSerial
+  #if HAS_DGUS_LCD
+    #define SERIAL_GET_TX_BUFFER_FREE() LCD_SERIAL.get_tx_buffer_free()
+  #endif
 #endif
 
 // ------------------------
@@ -135,226 +155,18 @@ void HAL_init();
 inline void HAL_clear_reset_source() { MCUSR = 0; }
 inline uint8_t HAL_get_reset_source() { return MCUSR; }
 
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wunused-function"
-extern "C" {
-  int freeMemory();
-}
-#pragma GCC diagnostic pop
+void HAL_reboot();
 
-// timers
-#define HAL_TIMER_RATE          ((F_CPU) / 8)    // i.e., 2MHz or 2.5MHz
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic push
+  #pragma GCC diagnostic ignored "-Wunused-function"
+#endif
 
-#define STEP_TIMER_NUM          1
-#define TEMP_TIMER_NUM          0
-#define PULSE_TIMER_NUM         STEP_TIMER_NUM
+extern "C" int freeMemory();
 
-#define TEMP_TIMER_FREQUENCY    ((F_CPU) / 64.0 / 256.0)
-
-#define STEPPER_TIMER_RATE      HAL_TIMER_RATE
-#define STEPPER_TIMER_PRESCALE  8
-#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // Cannot be of type double
-
-#define PULSE_TIMER_RATE       STEPPER_TIMER_RATE   // frequency of pulse timer
-#define PULSE_TIMER_PRESCALE   STEPPER_TIMER_PRESCALE
-#define PULSE_TIMER_TICKS_PER_US STEPPER_TIMER_TICKS_PER_US
-
-#define ENABLE_STEPPER_DRIVER_INTERRUPT()  SBI(TIMSK1, OCIE1A)
-#define DISABLE_STEPPER_DRIVER_INTERRUPT() CBI(TIMSK1, OCIE1A)
-#define STEPPER_ISR_ENABLED()             TEST(TIMSK1, OCIE1A)
-
-#define ENABLE_TEMPERATURE_INTERRUPT()     SBI(TIMSK0, OCIE0B)
-#define DISABLE_TEMPERATURE_INTERRUPT()    CBI(TIMSK0, OCIE0B)
-#define TEMPERATURE_ISR_ENABLED()         TEST(TIMSK0, OCIE0B)
-
-FORCE_INLINE void HAL_timer_start(const uint8_t timer_num, const uint32_t) {
-  switch (timer_num) {
-    case STEP_TIMER_NUM:
-      // waveform generation = 0100 = CTC
-      SET_WGM(1, CTC_OCRnA);
-
-      // output mode = 00 (disconnected)
-      SET_COMA(1, NORMAL);
-
-      // Set the timer pre-scaler
-      // Generally we use a divider of 8, resulting in a 2MHz timer
-      // frequency on a 16MHz MCU. If you are going to change this, be
-      // sure to regenerate speed_lookuptable.h with
-      // create_speed_lookuptable.py
-      SET_CS(1, PRESCALER_8);  //  CS 2 = 1/8 prescaler
-
-      // Init Stepper ISR to 122 Hz for quick starting
-      // (F_CPU) / (STEPPER_TIMER_PRESCALE) / frequency
-      OCR1A = 0x4000;
-      TCNT1 = 0;
-      break;
-
-    case TEMP_TIMER_NUM:
-      // Use timer0 for temperature measurement
-      // Interleave temperature interrupt with millies interrupt
-      OCR0B = 128;
-      break;
-  }
-}
-
-#define TIMER_OCR_1             OCR1A
-#define TIMER_COUNTER_1         TCNT1
-
-#define TIMER_OCR_0             OCR0A
-#define TIMER_COUNTER_0         TCNT0
-
-#define _CAT(a,V...) a##V
-#define HAL_timer_set_compare(timer, compare) (_CAT(TIMER_OCR_, timer) = compare)
-#define HAL_timer_get_compare(timer) _CAT(TIMER_OCR_, timer)
-#define HAL_timer_get_count(timer) _CAT(TIMER_COUNTER_, timer)
-
-/**
- * On AVR there is no hardware prioritization and preemption of
- * interrupts, so this emulates it. The UART has first priority
- * (otherwise, characters will be lost due to UART overflow).
- * Then: Stepper, Endstops, Temperature, and -finally- all others.
- */
-#define HAL_timer_isr_prologue(TIMER_NUM)
-#define HAL_timer_isr_epilogue(TIMER_NUM)
-
-/* 18 cycles maximum latency */
-#define HAL_STEP_TIMER_ISR() \
-extern "C" void TIMER1_COMPA_vect() __attribute__ ((signal, naked, used, externally_visible)); \
-extern "C" void TIMER1_COMPA_vect_bottom() asm ("TIMER1_COMPA_vect_bottom") __attribute__ ((used, externally_visible, noinline)); \
-void TIMER1_COMPA_vect() { \
-  __asm__ __volatile__ ( \
-    A("push r16")                      /* 2 Save R16 */ \
-    A("in r16, __SREG__")              /* 1 Get SREG */ \
-    A("push r16")                      /* 2 Save SREG into stack */ \
-    A("lds r16, %[timsk0]")            /* 2 Load into R0 the Temperature timer Interrupt mask register */ \
-    A("push r16")                      /* 2 Save TIMSK0 into the stack */ \
-    A("andi r16,~%[msk0]")             /* 1 Disable the temperature ISR */ \
-    A("sts %[timsk0], r16")            /* 2 And set the new value */ \
-    A("lds r16, %[timsk1]")            /* 2 Load into R0 the stepper timer Interrupt mask register [TIMSK1] */ \
-    A("andi r16,~%[msk1]")             /* 1 Disable the stepper ISR */ \
-    A("sts %[timsk1], r16")            /* 2 And set the new value */ \
-    A("push r16")                      /* 2 Save TIMSK1 into stack */ \
-    A("in r16, 0x3B")                  /* 1 Get RAMPZ register */ \
-    A("push r16")                      /* 2 Save RAMPZ into stack */ \
-    A("in r16, 0x3C")                  /* 1 Get EIND register */ \
-    A("push r0")                       /* C runtime can modify all the following registers without restoring them */ \
-    A("push r1")                       \
-    A("push r18")                      \
-    A("push r19")                      \
-    A("push r20")                      \
-    A("push r21")                      \
-    A("push r22")                      \
-    A("push r23")                      \
-    A("push r24")                      \
-    A("push r25")                      \
-    A("push r26")                      \
-    A("push r27")                      \
-    A("push r30")                      \
-    A("push r31")                      \
-    A("clr r1")                        /* C runtime expects this register to be 0 */ \
-    A("call TIMER1_COMPA_vect_bottom") /* Call the bottom handler - No inlining allowed, otherwise registers used are not saved */   \
-    A("pop r31")                       \
-    A("pop r30")                       \
-    A("pop r27")                       \
-    A("pop r26")                       \
-    A("pop r25")                       \
-    A("pop r24")                       \
-    A("pop r23")                       \
-    A("pop r22")                       \
-    A("pop r21")                       \
-    A("pop r20")                       \
-    A("pop r19")                       \
-    A("pop r18")                       \
-    A("pop r1")                        \
-    A("pop r0")                        \
-    A("out 0x3C, r16")                 /* 1 Restore EIND register */ \
-    A("pop r16")                       /* 2 Get the original RAMPZ register value */ \
-    A("out 0x3B, r16")                 /* 1 Restore RAMPZ register to its original value */ \
-    A("pop r16")                       /* 2 Get the original TIMSK1 value but with stepper ISR disabled */ \
-    A("ori r16,%[msk1]")               /* 1 Reenable the stepper ISR */ \
-    A("cli")                           /* 1 Disable global interrupts - Reenabling Stepper ISR can reenter amd temperature can reenter, and we want that, if it happens, after this ISR has ended */ \
-    A("sts %[timsk1], r16")            /* 2 And restore the old value - This reenables the stepper ISR */ \
-    A("pop r16")                       /* 2 Get the temperature timer Interrupt mask register [TIMSK0] */ \
-    A("sts %[timsk0], r16")            /* 2 And restore the old value - This reenables the temperature ISR */ \
-    A("pop r16")                       /* 2 Get the old SREG value */ \
-    A("out __SREG__, r16")             /* 1 And restore the SREG value */ \
-    A("pop r16")                       /* 2 Restore R16 value */ \
-    A("reti")                          /* 4 Return from interrupt */ \
-    :                                   \
-    : [timsk0] "i" ((uint16_t)&TIMSK0), \
-      [timsk1] "i" ((uint16_t)&TIMSK1), \
-      [msk0] "M" ((uint8_t)(1<<OCIE0B)),\
-      [msk1] "M" ((uint8_t)(1<<OCIE1A)) \
-    : \
-  ); \
-} \
-void TIMER1_COMPA_vect_bottom()
-
-/* 14 cycles maximum latency */
-#define HAL_TEMP_TIMER_ISR() \
-extern "C" void TIMER0_COMPB_vect() __attribute__ ((signal, naked, used, externally_visible)); \
-extern "C" void TIMER0_COMPB_vect_bottom()  asm ("TIMER0_COMPB_vect_bottom") __attribute__ ((used, externally_visible, noinline)); \
-void TIMER0_COMPB_vect() { \
-  __asm__ __volatile__ ( \
-    A("push r16")                       /* 2 Save R16 */ \
-    A("in r16, __SREG__")               /* 1 Get SREG */ \
-    A("push r16")                       /* 2 Save SREG into stack */ \
-    A("lds r16, %[timsk0]")             /* 2 Load into R0 the Temperature timer Interrupt mask register */ \
-    A("andi r16,~%[msk0]")              /* 1 Disable the temperature ISR */ \
-    A("sts %[timsk0], r16")             /* 2 And set the new value */ \
-    A("sei")                            /* 1 Enable global interrupts - It is safe, as the temperature ISR is disabled, so we cannot reenter it */    \
-    A("push r16")                       /* 2 Save TIMSK0 into stack */ \
-    A("in r16, 0x3B")                   /* 1 Get RAMPZ register */ \
-    A("push r16")                       /* 2 Save RAMPZ into stack */ \
-    A("in r16, 0x3C")                   /* 1 Get EIND register */ \
-    A("push r0")                        /* C runtime can modify all the following registers without restoring them */ \
-    A("push r1")                        \
-    A("push r18")                       \
-    A("push r19")                       \
-    A("push r20")                       \
-    A("push r21")                       \
-    A("push r22")                       \
-    A("push r23")                       \
-    A("push r24")                       \
-    A("push r25")                       \
-    A("push r26")                       \
-    A("push r27")                       \
-    A("push r30")                       \
-    A("push r31")                       \
-    A("clr r1")                         /* C runtime expects this register to be 0 */ \
-    A("call TIMER0_COMPB_vect_bottom")  /* Call the bottom handler - No inlining allowed, otherwise registers used are not saved */   \
-    A("pop r31")                        \
-    A("pop r30")                        \
-    A("pop r27")                        \
-    A("pop r26")                        \
-    A("pop r25")                        \
-    A("pop r24")                        \
-    A("pop r23")                        \
-    A("pop r22")                        \
-    A("pop r21")                        \
-    A("pop r20")                        \
-    A("pop r19")                        \
-    A("pop r18")                        \
-    A("pop r1")                         \
-    A("pop r0")                         \
-    A("out 0x3C, r16")                  /* 1 Restore EIND register */ \
-    A("pop r16")                        /* 2 Get the original RAMPZ register value */ \
-    A("out 0x3B, r16")                  /* 1 Restore RAMPZ register to its original value */ \
-    A("pop r16")                        /* 2 Get the original TIMSK0 value but with temperature ISR disabled */ \
-    A("ori r16,%[msk0]")                /* 1 Enable temperature ISR */ \
-    A("cli")                            /* 1 Disable global interrupts - We must do this, as we will reenable the temperature ISR, and we don't want to reenter this handler until the current one is done */ \
-    A("sts %[timsk0], r16")             /* 2 And restore the old value */ \
-    A("pop r16")                        /* 2 Get the old SREG */ \
-    A("out __SREG__, r16")              /* 1 And restore the SREG value */ \
-    A("pop r16")                        /* 2 Restore R16 */ \
-    A("reti")                           /* 4 Return from interrupt */ \
-    :                                   \
-    : [timsk0] "i"((uint16_t)&TIMSK0),  \
-      [msk0] "M" ((uint8_t)(1<<OCIE0B)) \
-    : \
-  ); \
-} \
-void TIMER0_COMPB_vect_bottom()
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic pop
+#endif
 
 // ADC
 #ifdef DIDR2
@@ -378,6 +190,7 @@ inline void HAL_adc_init() {
   #define HAL_START_ADC(ch) ADCSRB = 0; SET_ADMUX_ADCSRA(ch)
 #endif
 
+#define HAL_ADC_VREF        5.0
 #define HAL_ADC_RESOLUTION 10
 #define HAL_READ_ADC()  ADC
 #define HAL_ADC_READY() !TEST(ADCSRA, ADSC)
@@ -386,7 +199,7 @@ inline void HAL_adc_init() {
 #define GET_PIN_MAP_INDEX(pin) pin
 #define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
 
-#define HAL_SENSITIVE_PINS 0, 1
+#define HAL_SENSITIVE_PINS 0, 1,
 
 #ifdef __AVR_AT90USB1286__
   #define JTAG_DISABLE() do{ MCUCR = 0x80; MCUCR = 0x80; }while(0)
@@ -395,6 +208,8 @@ inline void HAL_adc_init() {
 // AVR compatibility
 #define strtof strtod
 
+#define HAL_CAN_SET_PWM_FREQ   // This HAL supports PWM Frequency adjustment
+
 /**
  *  set_pwm_frequency
  *  Sets the frequency of the timer corresponding to the provided pin

Marlin/src/HAL/AVR/HAL_SPI.cpp

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 
@@ -34,17 +34,17 @@
 #include "../../inc/MarlinConfig.h"
 
 void spiBegin() {
-  OUT_WRITE(SS_PIN, HIGH);
-  SET_OUTPUT(SCK_PIN);
-  SET_INPUT(MISO_PIN);
-  SET_OUTPUT(MOSI_PIN);
+  OUT_WRITE(SD_SS_PIN, HIGH);
+  SET_OUTPUT(SD_SCK_PIN);
+  SET_INPUT(SD_MISO_PIN);
+  SET_OUTPUT(SD_MOSI_PIN);
 
   #if DISABLED(SOFTWARE_SPI)
     // SS must be in output mode even it is not chip select
-    //SET_OUTPUT(SS_PIN);
+    //SET_OUTPUT(SD_SS_PIN);
     // set SS high - may be chip select for another SPI device
     //#if SET_SPI_SS_HIGH
-      //WRITE(SS_PIN, HIGH);
+      //WRITE(SD_SS_PIN, HIGH);
     //#endif
     // set a default rate
     spiInit(1);
@@ -74,7 +74,8 @@ void spiBegin() {
       #elif defined(PRR0)
         PRR0
       #endif
-        , PRSPI);
+      , PRSPI
+    );
 
     SPCR = _BV(SPE) | _BV(MSTR) | (spiRate >> 1);
     SPSR = spiRate & 1 || spiRate == 6 ? 0 : _BV(SPI2X);
@@ -88,7 +89,7 @@ void spiBegin() {
   }
 
   /** SPI read data  */
-  void spiRead(uint8_t* buf, uint16_t nbyte) {
+  void spiRead(uint8_t *buf, uint16_t nbyte) {
     if (nbyte-- == 0) return;
     SPDR = 0xFF;
     for (uint16_t i = 0; i < nbyte; i++) {
@@ -107,7 +108,7 @@ void spiBegin() {
   }
 
   /** SPI send block  */
-  void spiSendBlock(uint8_t token, const uint8_t* buf) {
+  void spiSendBlock(uint8_t token, const uint8_t *buf) {
     SPDR = token;
     for (uint16_t i = 0; i < 512; i += 2) {
       while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
@@ -195,19 +196,19 @@ void spiBegin() {
     // no interrupts during byte receive - about 8µs
     cli();
     // output pin high - like sending 0xFF
-    WRITE(MOSI_PIN, HIGH);
+    WRITE(SD_MOSI_PIN, HIGH);
 
     LOOP_L_N(i, 8) {
-      WRITE(SCK_PIN, HIGH);
+      WRITE(SD_SCK_PIN, HIGH);
 
       nop; // adjust so SCK is nice
       nop;
 
       data <<= 1;
 
-      if (READ(MISO_PIN)) data |= 1;
+      if (READ(SD_MISO_PIN)) data |= 1;
 
-      WRITE(SCK_PIN, LOW);
+      WRITE(SD_SCK_PIN, LOW);
     }
 
     sei();
@@ -215,7 +216,7 @@ void spiBegin() {
   }
 
   // Soft SPI read data
-  void spiRead(uint8_t* buf, uint16_t nbyte) {
+  void spiRead(uint8_t *buf, uint16_t nbyte) {
     for (uint16_t i = 0; i < nbyte; i++)
       buf[i] = spiRec();
   }
@@ -225,10 +226,10 @@ void spiBegin() {
     // no interrupts during byte send - about 8µs
     cli();
     LOOP_L_N(i, 8) {
-      WRITE(SCK_PIN, LOW);
-      WRITE(MOSI_PIN, data & 0x80);
+      WRITE(SD_SCK_PIN, LOW);
+      WRITE(SD_MOSI_PIN, data & 0x80);
       data <<= 1;
-      WRITE(SCK_PIN, HIGH);
+      WRITE(SD_SCK_PIN, HIGH);
     }
 
     nop; // hold SCK high for a few ns
@@ -236,13 +237,13 @@ void spiBegin() {
     nop;
     nop;
 
-    WRITE(SCK_PIN, LOW);
+    WRITE(SD_SCK_PIN, LOW);
 
     sei();
   }
 
   // Soft SPI send block
-  void spiSendBlock(uint8_t token, const uint8_t* buf) {
+  void spiSendBlock(uint8_t token, const uint8_t *buf) {
     spiSend(token);
     for (uint16_t i = 0; i < 512; i++)
       spiSend(buf[i]);

Marlin/src/HAL/AVR/MarlinSPI.h

@@ -0,0 +1,26 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include <SPI.h>
+
+using MarlinSPI = SPIClass;

Marlin/src/HAL/AVR/MarlinSerial.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -34,6 +34,7 @@
 #include <WString.h>
 
 #include "../../inc/MarlinConfigPre.h"
+#include "../../core/serial_hook.h"
 
 #ifndef SERIAL_PORT
   #define SERIAL_PORT 0
@@ -48,11 +49,11 @@
 
   // These are macros to build serial port register names for the selected SERIAL_PORT (C preprocessor
   // requires two levels of indirection to expand macro values properly)
-  #define SERIAL_REGNAME(registerbase,number,suffix) SERIAL_REGNAME_INTERNAL(registerbase,number,suffix)
+  #define SERIAL_REGNAME(registerbase,number,suffix) _SERIAL_REGNAME(registerbase,number,suffix)
   #if SERIAL_PORT == 0 && (!defined(UBRR0H) || !defined(UDR0)) // use un-numbered registers if necessary
-    #define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##suffix
+    #define _SERIAL_REGNAME(registerbase,number,suffix) registerbase##suffix
   #else
-    #define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##number##suffix
+    #define _SERIAL_REGNAME(registerbase,number,suffix) registerbase##number##suffix
   #endif
 
   // Registers used by MarlinSerial class (expanded depending on selected serial port)
@@ -135,10 +136,6 @@
     UART_DECL(3);
   #endif
 
-  #define DEC 10
-  #define HEX 16
-  #define OCT 8
-  #define BIN 2
   #define BYTE 0
 
   // Templated type selector
@@ -202,58 +199,30 @@
     static FORCE_INLINE void atomic_set_rx_tail(ring_buffer_pos_t value);
     static FORCE_INLINE ring_buffer_pos_t atomic_read_rx_tail();
 
-    public:
-
+  public:
     FORCE_INLINE static void store_rxd_char();
     FORCE_INLINE static void _tx_udr_empty_irq();
 
-    public:
-      MarlinSerial() {};
-      static void begin(const long);
-      static void end();
-      static int peek();
-      static int read();
-      static void flush();
-      static ring_buffer_pos_t available();
-      static void write(const uint8_t c);
-      static void flushTX();
-      #ifdef DGUS_SERIAL_PORT
-        static ring_buffer_pos_t get_tx_buffer_free();
-      #endif
+  public:
+    static void begin(const long);
+    static void end();
+    static int peek();
+    static int read();
+    static void flush();
+    static ring_buffer_pos_t available();
+    static void write(const uint8_t c);
+    static void flushTX();
+    #if HAS_DGUS_LCD
+      static ring_buffer_pos_t get_tx_buffer_free();
+    #endif
 
-      FORCE_INLINE static uint8_t dropped() { return Cfg::DROPPED_RX ? rx_dropped_bytes : 0; }
-      FORCE_INLINE static uint8_t buffer_overruns() { return Cfg::RX_OVERRUNS ? rx_buffer_overruns : 0; }
-      FORCE_INLINE static uint8_t framing_errors() { return Cfg::RX_FRAMING_ERRORS ? rx_framing_errors : 0; }
-      FORCE_INLINE static ring_buffer_pos_t rxMaxEnqueued() { return Cfg::MAX_RX_QUEUED ? rx_max_enqueued : 0; }
+    enum { HasEmergencyParser = Cfg::EMERGENCYPARSER };
+    static inline bool emergency_parser_enabled() { return Cfg::EMERGENCYPARSER; }
 
-      FORCE_INLINE static void write(const char* str) { while (*str) write(*str++); }
-      FORCE_INLINE static void write(const uint8_t* buffer, size_t size) { while (size--) write(*buffer++); }
-      FORCE_INLINE static void print(const String& s) { for (int i = 0; i < (int)s.length(); i++) write(s[i]); }
-      FORCE_INLINE static void print(const char* str) { write(str); }
-
-      static void print(char, int = BYTE);
-      static void print(unsigned char, int = BYTE);
-      static void print(int, int = DEC);
-      static void print(unsigned int, int = DEC);
-      static void print(long, int = DEC);
-      static void print(unsigned long, int = DEC);
-      static void print(double, int = 2);
-
-      static void println(const String& s);
-      static void println(const char[]);
-      static void println(char, int = BYTE);
-      static void println(unsigned char, int = BYTE);
-      static void println(int, int = DEC);
-      static void println(unsigned int, int = DEC);
-      static void println(long, int = DEC);
-      static void println(unsigned long, int = DEC);
-      static void println(double, int = 2);
-      static void println();
-      operator bool() { return true; }
-
-    private:
-      static void printNumber(unsigned long, const uint8_t);
-      static void printFloat(double, uint8_t);
+    FORCE_INLINE static uint8_t dropped() { return Cfg::DROPPED_RX ? rx_dropped_bytes : 0; }
+    FORCE_INLINE static uint8_t buffer_overruns() { return Cfg::RX_OVERRUNS ? rx_buffer_overruns : 0; }
+    FORCE_INLINE static uint8_t framing_errors() { return Cfg::RX_FRAMING_ERRORS ? rx_framing_errors : 0; }
+    FORCE_INLINE static ring_buffer_pos_t rxMaxEnqueued() { return Cfg::MAX_RX_QUEUED ? rx_max_enqueued : 0; }
   };
 
   template <uint8_t serial>
@@ -268,51 +237,61 @@
     static constexpr bool RX_FRAMING_ERRORS = ENABLED(SERIAL_STATS_RX_FRAMING_ERRORS);
     static constexpr bool MAX_RX_QUEUED     = ENABLED(SERIAL_STATS_MAX_RX_QUEUED);
   };
-  extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
+
+  typedef Serial1Class< MarlinSerial< MarlinSerialCfg<SERIAL_PORT> > > MSerialT1;
+  extern MSerialT1 customizedSerial1;
 
   #ifdef SERIAL_PORT_2
+    typedef Serial1Class< MarlinSerial< MarlinSerialCfg<SERIAL_PORT_2> > > MSerialT2;
+    extern MSerialT2 customizedSerial2;
+  #endif
 
-    extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2;
-
+  #ifdef SERIAL_PORT_3
+    typedef Serial1Class< MarlinSerial< MarlinSerialCfg<SERIAL_PORT_3> > > MSerialT3;
+    extern MSerialT3 customizedSerial3;
   #endif
 
 #endif // !USBCON
 
-#ifdef INTERNAL_SERIAL_PORT
+#ifdef MMU2_SERIAL_PORT
   template <uint8_t serial>
-  struct MarlinInternalSerialCfg {
+  struct MMU2SerialCfg {
     static constexpr int PORT               = serial;
     static constexpr unsigned int RX_SIZE   = 32;
     static constexpr unsigned int TX_SIZE   = 32;
     static constexpr bool XONOFF            = false;
     static constexpr bool EMERGENCYPARSER   = false;
     static constexpr bool DROPPED_RX        = false;
-    static constexpr bool RX_OVERRUNS       = false;
     static constexpr bool RX_FRAMING_ERRORS = false;
     static constexpr bool MAX_RX_QUEUED     = false;
+    static constexpr bool RX_OVERRUNS       = false;
   };
 
-  extern MarlinSerial<MarlinInternalSerialCfg<INTERNAL_SERIAL_PORT>> internalSerial;
+  typedef Serial1Class< MarlinSerial< MMU2SerialCfg<MMU2_SERIAL_PORT> > > MSerialMMU2;
+  extern MSerialMMU2 mmuSerial;
 #endif
 
-#ifdef DGUS_SERIAL_PORT
+#ifdef LCD_SERIAL_PORT
+
   template <uint8_t serial>
-  struct MarlinInternalSerialCfg {
+  struct LCDSerialCfg {
     static constexpr int PORT               = serial;
-    static constexpr unsigned int RX_SIZE   = 128;
-    static constexpr unsigned int TX_SIZE   = 48;
+    static constexpr unsigned int RX_SIZE   = TERN(HAS_DGUS_LCD, DGUS_RX_BUFFER_SIZE,  64);
+    static constexpr unsigned int TX_SIZE   = TERN(HAS_DGUS_LCD, DGUS_TX_BUFFER_SIZE, 128);
     static constexpr bool XONOFF            = false;
-    static constexpr bool EMERGENCYPARSER   = false;
+    static constexpr bool EMERGENCYPARSER   = ENABLED(EMERGENCY_PARSER);
     static constexpr bool DROPPED_RX        = false;
-    static constexpr bool RX_OVERRUNS       = HAS_DGUS_LCD && ENABLED(DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS);
     static constexpr bool RX_FRAMING_ERRORS = false;
     static constexpr bool MAX_RX_QUEUED     = false;
+    static constexpr bool RX_OVERRUNS       = BOTH(HAS_DGUS_LCD, SERIAL_STATS_RX_BUFFER_OVERRUNS);
   };
 
-  extern MarlinSerial<MarlinInternalSerialCfg<DGUS_SERIAL_PORT>> internalDgusSerial;
+  typedef Serial1Class< MarlinSerial< LCDSerialCfg<LCD_SERIAL_PORT> > > MSerialLCD;
+  extern MSerialLCD lcdSerial;
 #endif
 
 // Use the UART for Bluetooth in AT90USB configurations
 #if defined(USBCON) && ENABLED(BLUETOOTH)
-  extern HardwareSerial bluetoothSerial;
+  typedef Serial1Class<HardwareSerial> MSerialBT;
+  extern MSerialBT bluetoothSerial;
 #endif

Marlin/src/HAL/AVR/Servo.cpp

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 
@@ -48,7 +48,6 @@
  * readMicroseconds()    - Get the last-written servo pulse width in microseconds.
  * attached()            - Return true if a servo is attached.
  * detach()              - Stop an attached servo from pulsing its i/o pin.
- *
  */
 
 #ifdef __AVR__
@@ -59,7 +58,6 @@
 
 #include <avr/interrupt.h>
 
-#include "../shared/Marduino.h"
 #include "../shared/servo.h"
 #include "../shared/servo_private.h"
 

Marlin/src/HAL/AVR/ServoTimers.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -59,10 +59,12 @@
 // Say which 16 bit timers can be used and in what order
 #if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
   //#define _useTimer1
-  #define _useTimer3
   #define _useTimer4
-  #if !HAS_MOTOR_CURRENT_PWM
-    #define _useTimer5 // Timer 5 is used for motor current PWM and can't be used for servos.
+  #if NUM_SERVOS > SERVOS_PER_TIMER
+    #define _useTimer3
+    #if !HAS_MOTOR_CURRENT_PWM && SERVOS > 2 * SERVOS_PER_TIMER
+      #define _useTimer5 // Timer 5 is used for motor current PWM and can't be used for servos.
+    #endif
   #endif
 #elif defined(__AVR_ATmega32U4__)
   #define _useTimer3

Marlin/src/HAL/AVR/eeprom.cpp

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #ifdef __AVR__
@@ -25,19 +25,28 @@
 
 #if EITHER(EEPROM_SETTINGS, SD_FIRMWARE_UPDATE)
 
+/**
+ * PersistentStore for Arduino-style EEPROM interface
+ * with implementations supplied by the framework.
+ */
+
 #include "../shared/eeprom_api.h"
 
-bool PersistentStore::access_start() { return true; }
+#ifndef MARLIN_EEPROM_SIZE
+  #define MARLIN_EEPROM_SIZE size_t(E2END + 1)
+#endif
+size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
+bool PersistentStore::access_start()  { return true; }
 bool PersistentStore::access_finish() { return true; }
 
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
+  uint16_t written = 0;
   while (size--) {
     uint8_t * const p = (uint8_t * const)pos;
     uint8_t v = *value;
-    // EEPROM has only ~100,000 write cycles,
-    // so only write bytes that have changed!
-    if (v != eeprom_read_byte(p)) {
+    if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
       eeprom_write_byte(p, v);
+      if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
       if (eeprom_read_byte(p) != v) {
         SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
         return true;
@@ -46,11 +55,11 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
     crc16(crc, &v, 1);
     pos++;
     value++;
-  };
+  }
   return false;
 }
 
-bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
   do {
     uint8_t c = eeprom_read_byte((uint8_t*)pos);
     if (writing) *value = c;
@@ -61,7 +70,5 @@ bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t
   return false;  // always assume success for AVR's
 }
 
-size_t PersistentStore::capacity() { return E2END + 1; }
-
 #endif // EEPROM_SETTINGS || SD_FIRMWARE_UPDATE
 #endif // __AVR__

Marlin/src/HAL/AVR/endstop_interrupts.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -124,7 +124,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(X_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(X_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(X_MAX_PIN), "X_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(X_MAX_PIN), "X_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(X_MAX_PIN);
     #endif
   #endif
@@ -132,7 +132,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(X_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(X_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(X_MIN_PIN), "X_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(X_MIN_PIN), "X_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(X_MIN_PIN);
     #endif
   #endif
@@ -140,7 +140,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Y_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Y_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Y_MAX_PIN), "Y_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Y_MAX_PIN), "Y_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(Y_MAX_PIN);
     #endif
   #endif
@@ -148,7 +148,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Y_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Y_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Y_MIN_PIN), "Y_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Y_MIN_PIN), "Y_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(Y_MIN_PIN);
     #endif
   #endif
@@ -156,7 +156,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Z_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Z_MAX_PIN), "Z_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z_MAX_PIN), "Z_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(Z_MAX_PIN);
     #endif
   #endif
@@ -164,15 +164,60 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Z_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Z_MIN_PIN), "Z_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z_MIN_PIN), "Z_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(Z_MIN_PIN);
     #endif
   #endif
+  #if HAS_I_MAX
+    #if (digitalPinToInterrupt(I_MAX_PIN) != NOT_AN_INTERRUPT)
+      _ATTACH(I_MAX_PIN);
+    #else
+      static_assert(digitalPinHasPCICR(I_MAX_PIN), "I_MAX_PIN is not interrupt-capable");
+      pciSetup(I_MAX_PIN);
+    #endif
+  #elif HAS_I_MIN
+    #if (digitalPinToInterrupt(I_MIN_PIN) != NOT_AN_INTERRUPT)
+      _ATTACH(I_MIN_PIN);
+    #else
+      static_assert(digitalPinHasPCICR(I_MIN_PIN), "I_MIN_PIN is not interrupt-capable");
+      pciSetup(I_MIN_PIN);
+    #endif
+  #endif
+  #if HAS_J_MAX
+    #if (digitalPinToInterrupt(J_MAX_PIN) != NOT_AN_INTERRUPT)
+      _ATTACH(J_MAX_PIN);
+    #else
+      static_assert(digitalPinHasPCICR(J_MAX_PIN), "J_MAX_PIN is not interrupt-capable");
+      pciSetup(J_MAX_PIN);
+    #endif
+  #elif HAS_J_MIN
+    #if (digitalPinToInterrupt(J_MIN_PIN) != NOT_AN_INTERRUPT)
+      _ATTACH(J_MIN_PIN);
+    #else
+      static_assert(digitalPinHasPCICR(J_MIN_PIN), "J_MIN_PIN is not interrupt-capable");
+      pciSetup(J_MIN_PIN);
+    #endif
+  #endif
+  #if HAS_K_MAX
+    #if (digitalPinToInterrupt(K_MAX_PIN) != NOT_AN_INTERRUPT)
+      _ATTACH(K_MAX_PIN);
+    #else
+      static_assert(digitalPinHasPCICR(K_MAX_PIN), "K_MAX_PIN is not interrupt-capable");
+      pciSetup(K_MAX_PIN);
+    #endif
+  #elif HAS_K_MIN
+    #if (digitalPinToInterrupt(K_MIN_PIN) != NOT_AN_INTERRUPT)
+      _ATTACH(K_MIN_PIN);
+    #else
+      static_assert(digitalPinHasPCICR(K_MIN_PIN), "K_MIN_PIN is not interrupt-capable");
+      pciSetup(K_MIN_PIN);
+    #endif
+  #endif
   #if HAS_X2_MAX
     #if (digitalPinToInterrupt(X2_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(X2_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(X2_MAX_PIN), "X2_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(X2_MAX_PIN), "X2_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(X2_MAX_PIN);
     #endif
   #endif
@@ -180,7 +225,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(X2_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(X2_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(X2_MIN_PIN), "X2_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(X2_MIN_PIN), "X2_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(X2_MIN_PIN);
     #endif
   #endif
@@ -188,7 +233,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Y2_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Y2_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Y2_MAX_PIN), "Y2_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Y2_MAX_PIN), "Y2_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(Y2_MAX_PIN);
     #endif
   #endif
@@ -196,7 +241,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Y2_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Y2_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Y2_MIN_PIN), "Y2_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Y2_MIN_PIN), "Y2_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(Y2_MIN_PIN);
     #endif
   #endif
@@ -204,7 +249,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Z2_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z2_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Z2_MAX_PIN), "Z2_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z2_MAX_PIN), "Z2_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(Z2_MAX_PIN);
     #endif
   #endif
@@ -212,7 +257,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Z2_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z2_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Z2_MIN_PIN), "Z2_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z2_MIN_PIN), "Z2_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(Z2_MIN_PIN);
     #endif
   #endif
@@ -220,7 +265,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Z3_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z3_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Z3_MAX_PIN), "Z3_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z3_MAX_PIN), "Z3_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(Z3_MAX_PIN);
     #endif
   #endif
@@ -228,7 +273,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Z3_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z3_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Z3_MIN_PIN), "Z3_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z3_MIN_PIN), "Z3_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(Z3_MIN_PIN);
     #endif
   #endif
@@ -236,7 +281,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Z4_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z4_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Z4_MAX_PIN), "Z4_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z4_MAX_PIN), "Z4_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(Z4_MAX_PIN);
     #endif
   #endif
@@ -244,7 +289,7 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Z4_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z4_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Z4_MIN_PIN), "Z4_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z4_MIN_PIN), "Z4_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(Z4_MIN_PIN);
     #endif
   #endif
@@ -252,10 +297,9 @@ void setup_endstop_interrupts() {
     #if (digitalPinToInterrupt(Z_MIN_PROBE_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z_MIN_PROBE_PIN);
     #else
-      static_assert(digitalPinHasPCICR(Z_MIN_PROBE_PIN), "Z_MIN_PROBE_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(Z_MIN_PROBE_PIN), "Z_MIN_PROBE_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(Z_MIN_PROBE_PIN);
     #endif
   #endif
-
   // If we arrive here without raising an assertion, each pin has either an EXT-interrupt or a PCI.
 }

Marlin/src/HAL/AVR/fast_pwm.cpp

@@ -16,14 +16,14 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #ifdef __AVR__
 
 #include "../../inc/MarlinConfigPre.h"
 
-#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_PWM
+#if NEEDS_HARDWARE_PWM // Specific meta-flag for features that mandate PWM
 
 #include "HAL.h"
 
@@ -185,8 +185,8 @@ void set_pwm_frequency(const pin_t pin, int f_desired) {
         res_temp_phase_correct = rtf / 2;
       }
 
-      LIMIT(res_temp_fast, 1u, size);
-      LIMIT(res_temp_phase_correct, 1u, size);
+      LIMIT(res_temp_fast, 1U, size);
+      LIMIT(res_temp_phase_correct, 1U, size);
       // Calculate frequencies of test prescaler and resolution values
       const int f_temp_fast = (F_CPU) / (prescaler[i] * (1 + res_temp_fast)),
                 f_temp_phase_correct = (F_CPU) / (2 * prescaler[i] * res_temp_phase_correct),
@@ -274,9 +274,9 @@ void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255
     else
       top = *timer.ICRn; // top = ICRn
 
-    _SET_OCRnQ(timer.OCRnQ, timer.q, v * float(top / v_size)); // Scale 8/16-bit v to top value
+    _SET_OCRnQ(timer.OCRnQ, timer.q, v * float(top) / float(v_size)); // Scale 8/16-bit v to top value
   }
 }
 
-#endif // FAST_PWM_FAN || SPINDLE_LASER_PWM
+#endif // NEEDS_HARDWARE_PWM
 #endif // __AVR__

Marlin/src/HAL/AVR/fastio.cpp

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 
@@ -234,5 +234,55 @@ uint8_t extDigitalRead(const int8_t pin) {
   }
 }
 
+#if 0
+/**
+ * Set Timer 5 PWM frequency in Hz, from 3.8Hz up to ~16MHz
+ * with a minimum resolution of 100 steps.
+ *
+ * DC values -1.0 to 1.0. Negative duty cycle inverts the pulse.
+ */
+uint16_t set_pwm_frequency_hz(const_float_t hz, const float dca, const float dcb, const float dcc) {
+  float count = 0;
+  if (hz > 0 && (dca || dcb || dcc)) {
+    count = float(F_CPU) / hz;            // 1x prescaler, TOP for 16MHz base freq.
+    uint16_t prescaler;                   // Range of 30.5Hz (65535) 64.5KHz (>31)
+
+         if (count >= 255. * 256.) { prescaler = 1024; SET_CS(5, PRESCALER_1024); }
+    else if (count >= 255. * 64.)  { prescaler = 256;  SET_CS(5,  PRESCALER_256); }
+    else if (count >= 255. * 8.)   { prescaler = 64;   SET_CS(5,   PRESCALER_64); }
+    else if (count >= 255.)        { prescaler = 8;    SET_CS(5,    PRESCALER_8); }
+    else                           { prescaler = 1;    SET_CS(5,    PRESCALER_1); }
+
+    count /= float(prescaler);
+    const float pwm_top = round(count);   // Get the rounded count
+
+    ICR5 = (uint16_t)pwm_top - 1;         // Subtract 1 for TOP
+    OCR5A = pwm_top * ABS(dca);          // Update and scale DCs
+    OCR5B = pwm_top * ABS(dcb);
+    OCR5C = pwm_top * ABS(dcc);
+    _SET_COM(5, A, dca ? (dca < 0 ? COM_SET_CLEAR : COM_CLEAR_SET) : COM_NORMAL); // Set compare modes
+    _SET_COM(5, B, dcb ? (dcb < 0 ? COM_SET_CLEAR : COM_CLEAR_SET) : COM_NORMAL);
+    _SET_COM(5, C, dcc ? (dcc < 0 ? COM_SET_CLEAR : COM_CLEAR_SET) : COM_NORMAL);
+
+    SET_WGM(5, FAST_PWM_ICRn);            // Fast PWM with ICR5 as TOP
+
+    //SERIAL_ECHOLNPGM("Timer 5 Settings:");
+    //SERIAL_ECHOLNPGM("  Prescaler=", prescaler);
+    //SERIAL_ECHOLNPGM("        TOP=", ICR5);
+    //SERIAL_ECHOLNPGM("      OCR5A=", OCR5A);
+    //SERIAL_ECHOLNPGM("      OCR5B=", OCR5B);
+    //SERIAL_ECHOLNPGM("      OCR5C=", OCR5C);
+  }
+  else {
+    // Restore the default for Timer 5
+    SET_WGM(5, PWM_PC_8);                 // PWM 8-bit (Phase Correct)
+    SET_COMS(5, NORMAL, NORMAL, NORMAL);  // Do nothing
+    SET_CS(5, PRESCALER_64);              // 16MHz / 64 = 250KHz
+    OCR5A = OCR5B = OCR5C = 0;
+  }
+  return round(count);
+}
+#endif
+
 #endif // FASTIO_EXT_START
 #endif // __AVR__

Marlin/src/HAL/AVR/fastio.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -29,11 +29,17 @@
 
 #include <avr/io.h>
 
-#define AVR_AT90USB1286_FAMILY (defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1286P__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB646P__) || defined(__AVR_AT90USB647__))
-#define AVR_ATmega1284_FAMILY (defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__))
-#define AVR_ATmega2560_FAMILY (defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__))
-#define AVR_ATmega2561_FAMILY (defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__))
-#define AVR_ATmega328_FAMILY (defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__))
+#if defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1286P__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB646P__) || defined(__AVR_AT90USB647__)
+  #define AVR_AT90USB1286_FAMILY 1
+#elif defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__)
+  #define AVR_ATmega1284_FAMILY 1
+#elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
+  #define AVR_ATmega2560_FAMILY 1
+#elif defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__)
+  #define AVR_ATmega2561_FAMILY 1
+#elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__)
+  #define AVR_ATmega328_FAMILY 1
+#endif
 
 /**
  * Include Ports and Functions
@@ -57,7 +63,7 @@
  *
  * Now you can simply SET_OUTPUT(PIN); WRITE(PIN, HIGH); WRITE(PIN, LOW);
  *
- * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
+ * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/cpp/Stringification.html
  */
 
 #define _READ(IO)             TEST(DIO ## IO ## _RPORT, DIO ## IO ## _PIN)
@@ -278,8 +284,8 @@ enum ClockSource2 : char {
  * PWM availability macros
  */
 
-// Determine which harware PWMs are already in use
-#define _PWM_CHK_FAN_B(P) (P == E0_AUTO_FAN_PIN || P == E1_AUTO_FAN_PIN || P == E2_AUTO_FAN_PIN || P == E3_AUTO_FAN_PIN || P == E4_AUTO_FAN_PIN || P == E5_AUTO_FAN_PIN || P == E6_AUTO_FAN_PIN || P == E7_AUTO_FAN_PIN || P == CHAMBER_AUTO_FAN_PIN)
+// Determine which hardware PWMs are already in use
+#define _PWM_CHK_FAN_B(P) (P == E0_AUTO_FAN_PIN || P == E1_AUTO_FAN_PIN || P == E2_AUTO_FAN_PIN || P == E3_AUTO_FAN_PIN || P == E4_AUTO_FAN_PIN || P == E5_AUTO_FAN_PIN || P == E6_AUTO_FAN_PIN || P == E7_AUTO_FAN_PIN || P == CHAMBER_AUTO_FAN_PIN || P == COOLER_AUTO_FAN_PIN)
 #if PIN_EXISTS(CONTROLLER_FAN)
   #define PWM_CHK_FAN_B(P) (_PWM_CHK_FAN_B(P) || P == CONTROLLER_FAN_PIN)
 #else

Marlin/src/HAL/AVR/fastio/fastio_1280.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/AVR/fastio/fastio_1281.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/AVR/fastio/fastio_168.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/AVR/fastio/fastio_644.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/AVR/fastio/fastio_AT90USB.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/AVR/inc/Conditionals_LCD.h

@@ -16,7 +16,11 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
+
+#if HAS_SPI_TFT || HAS_FSMC_TFT
+  #error "Sorry! TFT displays are not available for HAL/AVR."
+#endif

Marlin/src/HAL/AVR/inc/Conditionals_adv.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/AVR/inc/Conditionals_post.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/AVR/inc/SanityCheck.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -25,16 +25,6 @@
  * Test AVR-specific configuration values for errors at compile-time.
  */
 
-/**
- * Digipot requirement
- */
- #if ENABLED(DIGIPOT_MCP4018)
-  #if !defined(DIGIPOTS_I2C_SDA_X) || !defined(DIGIPOTS_I2C_SDA_Y) || !defined(DIGIPOTS_I2C_SDA_Z) \
-    || !defined(DIGIPOTS_I2C_SDA_E0) || !defined(DIGIPOTS_I2C_SDA_E1)
-      #error "DIGIPOT_MCP4018 requires DIGIPOTS_I2C_SDA_* pins to be defined."
-  #endif
-#endif
-
 /**
  * Checks for FAST PWM
  */
@@ -45,21 +35,31 @@
 /**
  * Sanity checks for Spindle / Laser PWM
  */
-#if ENABLED(SPINDLE_LASER_PWM)
+#if ENABLED(SPINDLE_LASER_USE_PWM)
+  #include "../ServoTimers.h"   // Needed to check timer availability (_useTimer3)
   #if SPINDLE_LASER_PWM_PIN == 4 || WITHIN(SPINDLE_LASER_PWM_PIN, 11, 13)
     #error "Counter/Timer for SPINDLE_LASER_PWM_PIN is used by a system interrupt."
-  #elif NUM_SERVOS > 0 && (WITHIN(SPINDLE_LASER_PWM_PIN, 2, 3) || SPINDLE_LASER_PWM_PIN == 5)
+  #elif NUM_SERVOS > 0 && defined(_useTimer3) && (WITHIN(SPINDLE_LASER_PWM_PIN, 2, 3) || SPINDLE_LASER_PWM_PIN == 5)
     #error "Counter/Timer for SPINDLE_LASER_PWM_PIN is used by the servo system."
   #endif
+#elif defined(SPINDLE_LASER_FREQUENCY)
+  #error "SPINDLE_LASER_FREQUENCY requires SPINDLE_LASER_USE_PWM."
 #endif
 
 /**
  * The Trinamic library includes SoftwareSerial.h, leading to a compile error.
  */
-#if HAS_TRINAMIC_CONFIG && ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
+#if BOTH(HAS_TRINAMIC_CONFIG, ENDSTOP_INTERRUPTS_FEATURE)
   #error "TMCStepper includes SoftwareSerial.h which is incompatible with ENDSTOP_INTERRUPTS_FEATURE. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
 #endif
 
-#if HAS_TMC_SW_SERIAL && ENABLED(MONITOR_DRIVER_STATUS)
+#if BOTH(HAS_TMC_SW_SERIAL, MONITOR_DRIVER_STATUS)
   #error "MONITOR_DRIVER_STATUS causes performance issues when used with SoftwareSerial-connected drivers. Disable MONITOR_DRIVER_STATUS or use hardware serial to continue."
 #endif
+
+/**
+ * Postmortem debugging
+ */
+#if ENABLED(POSTMORTEM_DEBUGGING)
+  #error "POSTMORTEM_DEBUGGING is not supported on AVR boards."
+#endif

Marlin/src/HAL/AVR/math.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/AVR/pinsDebug.h

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
@@ -13,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -26,7 +29,9 @@
 
 #define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
 
-#define AVR_ATmega2560_FAMILY_PLUS_70 MB(BQ_ZUM_MEGA_3D, MIGHTYBOARD_REVE, MINIRAMBO, SCOOVO_X9H)
+#if MB(BQ_ZUM_MEGA_3D, MIGHTYBOARD_REVE, MINIRAMBO, SCOOVO_X9H, TRIGORILLA_14)
+  #define AVR_ATmega2560_FAMILY_PLUS_70 1
+#endif
 
 #if AVR_AT90USB1286_FAMILY
 
@@ -36,7 +41,7 @@
   // portModeRegister takes a different argument
   #define digitalPinToTimer_DEBUG(p) digitalPinToTimer(p)
   #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask(p)
-  #define digitalPinToPort_DEBUG(p) digitalPinToPort_Teensy(p)
+  #define digitalPinToPort_DEBUG(p) digitalPinToPort(p)
   #define GET_PINMODE(pin) (*portModeRegister(pin) & digitalPinToBitMask_DEBUG(pin))
 
 #elif AVR_ATmega2560_FAMILY_PLUS_70   // So we can access/display all the pins on boards using more than 70
@@ -233,9 +238,9 @@ static void print_is_also_tied() { SERIAL_ECHOPGM(" is also tied to this pin");
 
 inline void com_print(const uint8_t N, const uint8_t Z) {
   const uint8_t *TCCRA = (uint8_t*)TCCR_A(N);
-  SERIAL_ECHOPGM("    COM");
-  SERIAL_CHAR('0' + N, Z);
-  SERIAL_ECHOPAIR(": ", int((*TCCRA >> (6 - Z * 2)) & 0x03));
+  SERIAL_ECHOPGM("    COM", AS_DIGIT(N));
+  SERIAL_CHAR(Z);
+  SERIAL_ECHOPGM(": ", int((*TCCRA >> (6 - Z * 2)) & 0x03));
 }
 
 void timer_prefix(uint8_t T, char L, uint8_t N) {  // T - timer    L - pwm  N - WGM bit layout
@@ -245,8 +250,8 @@ void timer_prefix(uint8_t T, char L, uint8_t N) {  // T - timer    L - pwm  N -
   uint8_t WGM = (((*TCCRB & _BV(WGM_2)) >> 1) | (*TCCRA & (_BV(WGM_0) | _BV(WGM_1))));
   if (N == 4) WGM |= ((*TCCRB & _BV(WGM_3)) >> 1);
 
-  SERIAL_ECHOPGM("    TIMER");
-  SERIAL_CHAR(T + '0', L);
+  SERIAL_ECHOPGM("    TIMER", AS_DIGIT(T));
+  SERIAL_CHAR(L);
   SERIAL_ECHO_SP(3);
 
   if (N == 3) {
@@ -257,22 +262,14 @@ void timer_prefix(uint8_t T, char L, uint8_t N) {  // T - timer    L - pwm  N -
     const uint16_t *OCRVAL16 = (uint16_t*)OCR_VAL(T, L - 'A');
     PWM_PRINT(*OCRVAL16);
   }
-  SERIAL_ECHOPAIR("    WGM: ", WGM);
+  SERIAL_ECHOPGM("    WGM: ", WGM);
   com_print(T,L);
-  SERIAL_ECHOPAIR("    CS: ", (*TCCRB & (_BV(CS_0) | _BV(CS_1) | _BV(CS_2)) ));
-
-  SERIAL_ECHOPGM("    TCCR");
-  SERIAL_CHAR(T + '0');
-  SERIAL_ECHOPAIR("A: ", *TCCRA);
-
-  SERIAL_ECHOPGM("    TCCR");
-  SERIAL_CHAR(T + '0');
-  SERIAL_ECHOPAIR("B: ", *TCCRB);
+  SERIAL_ECHOPGM("    CS: ", (*TCCRB & (_BV(CS_0) | _BV(CS_1) | _BV(CS_2)) ));
+  SERIAL_ECHOPGM("    TCCR", AS_DIGIT(T), "A: ", *TCCRA);
+  SERIAL_ECHOPGM("    TCCR", AS_DIGIT(T), "B: ", *TCCRB);
 
   const uint8_t *TMSK = (uint8_t*)TIMSK(T);
-  SERIAL_ECHOPGM("    TIMSK");
-  SERIAL_CHAR(T + '0');
-  SERIAL_ECHOPAIR(": ", *TMSK);
+  SERIAL_ECHOPGM("    TIMSK", AS_DIGIT(T), ": ", *TMSK);
 
   const uint8_t OCIE = L - 'A' + 1;
   if (N == 3) { if (WGM == 0 || WGM == 2 || WGM ==  4 || WGM ==  6) err_is_counter(); }
@@ -399,3 +396,4 @@ static void pwm_details(uint8_t pin) {
 #endif
 
 #define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
+#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)

Marlin/src/HAL/AVR/pinsDebug_Teensyduino.h

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
@@ -13,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/AVR/pinsDebug_plus_70.h

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
@@ -13,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -22,15 +25,12 @@
  * Structures for 2560 family boards that use more than 70 pins
  */
 
-#undef NUM_DIGITAL_PINS
-#if MB(BQ_ZUM_MEGA_3D)
+#if MB(BQ_ZUM_MEGA_3D, MINIRAMBO, SCOOVO_X9H, TRIGORILLA_14)
+  #undef NUM_DIGITAL_PINS
   #define NUM_DIGITAL_PINS            85
 #elif MB(MIGHTYBOARD_REVE)
+  #undef NUM_DIGITAL_PINS
   #define NUM_DIGITAL_PINS            80
-#elif MB(MINIRAMBO)
-  #define NUM_DIGITAL_PINS            85
-#elif MB(SCOOVO_X9H)
-  #define NUM_DIGITAL_PINS            85
 #endif
 
 #define PA 1

Marlin/src/HAL/AVR/spi_pins.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -51,15 +51,15 @@
   #define AVR_SS_PIN   16
 #endif
 
-#ifndef SCK_PIN
-  #define SCK_PIN  AVR_SCK_PIN
+#ifndef SD_SCK_PIN
+  #define SD_SCK_PIN  AVR_SCK_PIN
 #endif
-#ifndef MISO_PIN
-  #define MISO_PIN AVR_MISO_PIN
+#ifndef SD_MISO_PIN
+  #define SD_MISO_PIN AVR_MISO_PIN
 #endif
-#ifndef MOSI_PIN
-  #define MOSI_PIN AVR_MOSI_PIN
+#ifndef SD_MOSI_PIN
+  #define SD_MOSI_PIN AVR_MOSI_PIN
 #endif
-#ifndef SS_PIN
-  #define SS_PIN   AVR_SS_PIN
+#ifndef SD_SS_PIN
+  #define SD_SS_PIN   AVR_SS_PIN
 #endif

Marlin/src/HAL/AVR/timers.h

@@ -0,0 +1,260 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include <stdint.h>
+
+// ------------------------
+// Types
+// ------------------------
+
+typedef uint16_t hal_timer_t;
+#define HAL_TIMER_TYPE_MAX 0xFFFF
+
+// ------------------------
+// Defines
+// ------------------------
+
+#define HAL_TIMER_RATE          ((F_CPU) / 8)    // i.e., 2MHz or 2.5MHz
+
+#ifndef STEP_TIMER_NUM
+  #define STEP_TIMER_NUM        1
+#endif
+#ifndef PULSE_TIMER_NUM
+  #define PULSE_TIMER_NUM       STEP_TIMER_NUM
+#endif
+#ifndef TEMP_TIMER_NUM
+  #define TEMP_TIMER_NUM        0
+#endif
+
+#define TEMP_TIMER_FREQUENCY    ((F_CPU) / 64.0 / 256.0)
+
+#define STEPPER_TIMER_RATE      HAL_TIMER_RATE
+#define STEPPER_TIMER_PRESCALE  8
+#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // Cannot be of type double
+
+#define PULSE_TIMER_RATE       STEPPER_TIMER_RATE   // frequency of pulse timer
+#define PULSE_TIMER_PRESCALE   STEPPER_TIMER_PRESCALE
+#define PULSE_TIMER_TICKS_PER_US STEPPER_TIMER_TICKS_PER_US
+
+#define ENABLE_STEPPER_DRIVER_INTERRUPT()  SBI(TIMSK1, OCIE1A)
+#define DISABLE_STEPPER_DRIVER_INTERRUPT() CBI(TIMSK1, OCIE1A)
+#define STEPPER_ISR_ENABLED()             TEST(TIMSK1, OCIE1A)
+
+#define ENABLE_TEMPERATURE_INTERRUPT()     SBI(TIMSK0, OCIE0B)
+#define DISABLE_TEMPERATURE_INTERRUPT()    CBI(TIMSK0, OCIE0B)
+#define TEMPERATURE_ISR_ENABLED()         TEST(TIMSK0, OCIE0B)
+
+FORCE_INLINE void HAL_timer_start(const uint8_t timer_num, const uint32_t) {
+  switch (timer_num) {
+    case STEP_TIMER_NUM:
+      // waveform generation = 0100 = CTC
+      SET_WGM(1, CTC_OCRnA);
+
+      // output mode = 00 (disconnected)
+      SET_COMA(1, NORMAL);
+
+      // Set the timer pre-scaler
+      // Generally we use a divider of 8, resulting in a 2MHz timer
+      // frequency on a 16MHz MCU. If you are going to change this, be
+      // sure to regenerate speed_lookuptable.h with
+      // create_speed_lookuptable.py
+      SET_CS(1, PRESCALER_8);  //  CS 2 = 1/8 prescaler
+
+      // Init Stepper ISR to 122 Hz for quick starting
+      // (F_CPU) / (STEPPER_TIMER_PRESCALE) / frequency
+      OCR1A = 0x4000;
+      TCNT1 = 0;
+      break;
+
+    case TEMP_TIMER_NUM:
+      // Use timer0 for temperature measurement
+      // Interleave temperature interrupt with millies interrupt
+      OCR0B = 128;
+      break;
+  }
+}
+
+#define TIMER_OCR_1             OCR1A
+#define TIMER_COUNTER_1         TCNT1
+
+#define TIMER_OCR_0             OCR0A
+#define TIMER_COUNTER_0         TCNT0
+
+#define _CAT(a,V...) a##V
+#define HAL_timer_set_compare(timer, compare) (_CAT(TIMER_OCR_, timer) = compare)
+#define HAL_timer_get_compare(timer) _CAT(TIMER_OCR_, timer)
+#define HAL_timer_get_count(timer) _CAT(TIMER_COUNTER_, timer)
+
+/**
+ * On AVR there is no hardware prioritization and preemption of
+ * interrupts, so this emulates it. The UART has first priority
+ * (otherwise, characters will be lost due to UART overflow).
+ * Then: Stepper, Endstops, Temperature, and -finally- all others.
+ */
+#define HAL_timer_isr_prologue(TIMER_NUM)
+#define HAL_timer_isr_epilogue(TIMER_NUM)
+
+/* 18 cycles maximum latency */
+#ifndef HAL_STEP_TIMER_ISR
+
+#define HAL_STEP_TIMER_ISR() \
+extern "C" void TIMER1_COMPA_vect() __attribute__ ((signal, naked, used, externally_visible)); \
+extern "C" void TIMER1_COMPA_vect_bottom() asm ("TIMER1_COMPA_vect_bottom") __attribute__ ((used, externally_visible, noinline)); \
+void TIMER1_COMPA_vect() { \
+  __asm__ __volatile__ ( \
+    A("push r16")                      /* 2 Save R16 */ \
+    A("in r16, __SREG__")              /* 1 Get SREG */ \
+    A("push r16")                      /* 2 Save SREG into stack */ \
+    A("lds r16, %[timsk0]")            /* 2 Load into R0 the Temperature timer Interrupt mask register */ \
+    A("push r16")                      /* 2 Save TIMSK0 into the stack */ \
+    A("andi r16,~%[msk0]")             /* 1 Disable the temperature ISR */ \
+    A("sts %[timsk0], r16")            /* 2 And set the new value */ \
+    A("lds r16, %[timsk1]")            /* 2 Load into R0 the stepper timer Interrupt mask register [TIMSK1] */ \
+    A("andi r16,~%[msk1]")             /* 1 Disable the stepper ISR */ \
+    A("sts %[timsk1], r16")            /* 2 And set the new value */ \
+    A("push r16")                      /* 2 Save TIMSK1 into stack */ \
+    A("in r16, 0x3B")                  /* 1 Get RAMPZ register */ \
+    A("push r16")                      /* 2 Save RAMPZ into stack */ \
+    A("in r16, 0x3C")                  /* 1 Get EIND register */ \
+    A("push r0")                       /* C runtime can modify all the following registers without restoring them */ \
+    A("push r1")                       \
+    A("push r18")                      \
+    A("push r19")                      \
+    A("push r20")                      \
+    A("push r21")                      \
+    A("push r22")                      \
+    A("push r23")                      \
+    A("push r24")                      \
+    A("push r25")                      \
+    A("push r26")                      \
+    A("push r27")                      \
+    A("push r30")                      \
+    A("push r31")                      \
+    A("clr r1")                        /* C runtime expects this register to be 0 */ \
+    A("call TIMER1_COMPA_vect_bottom") /* Call the bottom handler - No inlining allowed, otherwise registers used are not saved */   \
+    A("pop r31")                       \
+    A("pop r30")                       \
+    A("pop r27")                       \
+    A("pop r26")                       \
+    A("pop r25")                       \
+    A("pop r24")                       \
+    A("pop r23")                       \
+    A("pop r22")                       \
+    A("pop r21")                       \
+    A("pop r20")                       \
+    A("pop r19")                       \
+    A("pop r18")                       \
+    A("pop r1")                        \
+    A("pop r0")                        \
+    A("out 0x3C, r16")                 /* 1 Restore EIND register */ \
+    A("pop r16")                       /* 2 Get the original RAMPZ register value */ \
+    A("out 0x3B, r16")                 /* 1 Restore RAMPZ register to its original value */ \
+    A("pop r16")                       /* 2 Get the original TIMSK1 value but with stepper ISR disabled */ \
+    A("ori r16,%[msk1]")               /* 1 Reenable the stepper ISR */ \
+    A("cli")                           /* 1 Disable global interrupts - Reenabling Stepper ISR can reenter amd temperature can reenter, and we want that, if it happens, after this ISR has ended */ \
+    A("sts %[timsk1], r16")            /* 2 And restore the old value - This reenables the stepper ISR */ \
+    A("pop r16")                       /* 2 Get the temperature timer Interrupt mask register [TIMSK0] */ \
+    A("sts %[timsk0], r16")            /* 2 And restore the old value - This reenables the temperature ISR */ \
+    A("pop r16")                       /* 2 Get the old SREG value */ \
+    A("out __SREG__, r16")             /* 1 And restore the SREG value */ \
+    A("pop r16")                       /* 2 Restore R16 value */ \
+    A("reti")                          /* 4 Return from interrupt */ \
+    :                                   \
+    : [timsk0] "i" ((uint16_t)&TIMSK0), \
+      [timsk1] "i" ((uint16_t)&TIMSK1), \
+      [msk0] "M" ((uint8_t)(1<<OCIE0B)),\
+      [msk1] "M" ((uint8_t)(1<<OCIE1A)) \
+    : \
+  ); \
+} \
+void TIMER1_COMPA_vect_bottom()
+
+#endif // HAL_STEP_TIMER_ISR
+
+#ifndef HAL_TEMP_TIMER_ISR
+
+/* 14 cycles maximum latency */
+#define HAL_TEMP_TIMER_ISR() \
+extern "C" void TIMER0_COMPB_vect() __attribute__ ((signal, naked, used, externally_visible)); \
+extern "C" void TIMER0_COMPB_vect_bottom()  asm ("TIMER0_COMPB_vect_bottom") __attribute__ ((used, externally_visible, noinline)); \
+void TIMER0_COMPB_vect() { \
+  __asm__ __volatile__ ( \
+    A("push r16")                       /* 2 Save R16 */ \
+    A("in r16, __SREG__")               /* 1 Get SREG */ \
+    A("push r16")                       /* 2 Save SREG into stack */ \
+    A("lds r16, %[timsk0]")             /* 2 Load into R0 the Temperature timer Interrupt mask register */ \
+    A("andi r16,~%[msk0]")              /* 1 Disable the temperature ISR */ \
+    A("sts %[timsk0], r16")             /* 2 And set the new value */ \
+    A("sei")                            /* 1 Enable global interrupts - It is safe, as the temperature ISR is disabled, so we cannot reenter it */    \
+    A("push r16")                       /* 2 Save TIMSK0 into stack */ \
+    A("in r16, 0x3B")                   /* 1 Get RAMPZ register */ \
+    A("push r16")                       /* 2 Save RAMPZ into stack */ \
+    A("in r16, 0x3C")                   /* 1 Get EIND register */ \
+    A("push r0")                        /* C runtime can modify all the following registers without restoring them */ \
+    A("push r1")                        \
+    A("push r18")                       \
+    A("push r19")                       \
+    A("push r20")                       \
+    A("push r21")                       \
+    A("push r22")                       \
+    A("push r23")                       \
+    A("push r24")                       \
+    A("push r25")                       \
+    A("push r26")                       \
+    A("push r27")                       \
+    A("push r30")                       \
+    A("push r31")                       \
+    A("clr r1")                         /* C runtime expects this register to be 0 */ \
+    A("call TIMER0_COMPB_vect_bottom")  /* Call the bottom handler - No inlining allowed, otherwise registers used are not saved */   \
+    A("pop r31")                        \
+    A("pop r30")                        \
+    A("pop r27")                        \
+    A("pop r26")                        \
+    A("pop r25")                        \
+    A("pop r24")                        \
+    A("pop r23")                        \
+    A("pop r22")                        \
+    A("pop r21")                        \
+    A("pop r20")                        \
+    A("pop r19")                        \
+    A("pop r18")                        \
+    A("pop r1")                         \
+    A("pop r0")                         \
+    A("out 0x3C, r16")                  /* 1 Restore EIND register */ \
+    A("pop r16")                        /* 2 Get the original RAMPZ register value */ \
+    A("out 0x3B, r16")                  /* 1 Restore RAMPZ register to its original value */ \
+    A("pop r16")                        /* 2 Get the original TIMSK0 value but with temperature ISR disabled */ \
+    A("ori r16,%[msk0]")                /* 1 Enable temperature ISR */ \
+    A("cli")                            /* 1 Disable global interrupts - We must do this, as we will reenable the temperature ISR, and we don't want to reenter this handler until the current one is done */ \
+    A("sts %[timsk0], r16")             /* 2 And restore the old value */ \
+    A("pop r16")                        /* 2 Get the old SREG */ \
+    A("out __SREG__, r16")              /* 1 And restore the SREG value */ \
+    A("pop r16")                        /* 2 Restore R16 */ \
+    A("reti")                           /* 4 Return from interrupt */ \
+    :                                   \
+    : [timsk0] "i"((uint16_t)&TIMSK0),  \
+      [msk0] "M" ((uint8_t)(1<<OCIE0B)) \
+    : \
+  ); \
+} \
+void TIMER0_COMPB_vect_bottom()
+
+#endif // HAL_TEMP_TIMER_ISR

Marlin/src/HAL/AVR/u8g_com_HAL_AVR_sw_spi.cpp

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 
@@ -57,15 +57,15 @@
 
 #include "../../inc/MarlinConfigPre.h"
 
-#if HAS_GRAPHICAL_LCD
+#if HAS_MARLINUI_U8GLIB
 
 #include "../shared/Marduino.h"
 #include "../shared/Delay.h"
 
-#include <U8glib.h>
+#include <U8glib-HAL.h>
 
-uint8_t u8g_bitData, u8g_bitNotData, u8g_bitClock, u8g_bitNotClock;
-volatile uint8_t *u8g_outData, *u8g_outClock;
+static uint8_t u8g_bitData, u8g_bitNotData, u8g_bitClock, u8g_bitNotClock;
+static volatile uint8_t *u8g_outData, *u8g_outClock;
 
 static void u8g_com_arduino_init_shift_out(uint8_t dataPin, uint8_t clockPin) {
   u8g_outData = portOutputRegister(digitalPinToPort(dataPin));
@@ -189,5 +189,5 @@ uint8_t u8g_com_HAL_AVR_sw_sp_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
   return 1;
 }
 
-#endif // HAS_GRAPHICAL_LCD
+#endif // HAS_MARLINUI_U8GLIB
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/AVR/watchdog.cpp

@@ -16,10 +16,9 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
-
 #ifdef __AVR__
 
 #include "../../inc/MarlinConfig.h"

Marlin/src/HAL/AVR/watchdog.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/DUE/DebugMonitor.cpp

@@ -1,343 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-#ifdef ARDUINO_ARCH_SAM
-
-#include "../../core/macros.h"
-#include "../../core/serial.h"
-
-#include "../shared/backtrace/unwinder.h"
-#include "../shared/backtrace/unwmemaccess.h"
-
-#include <stdarg.h>
-
-// Debug monitor that dumps to the Programming port all status when
-// an exception or WDT timeout happens - And then resets the board
-
-// All the Monitor routines must run with interrupts disabled and
-// under an ISR execution context. That is why we cannot reuse the
-// Serial interrupt routines or any C runtime, as we don't know the
-// state we are when running them
-
-// A SW memory barrier, to ensure GCC does not overoptimize loops
-#define sw_barrier() __asm__ volatile("": : :"memory");
-
-// (re)initialize UART0 as a monitor output to 250000,n,8,1
-static void TXBegin() {
-
-  // Disable UART interrupt in NVIC
-  NVIC_DisableIRQ( UART_IRQn );
-
-  // We NEED memory barriers to ensure Interrupts are actually disabled!
-  // ( https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the )
-  __DSB();
-  __ISB();
-
-  // Disable clock
-  pmc_disable_periph_clk( ID_UART );
-
-  // Configure PMC
-  pmc_enable_periph_clk( ID_UART );
-
-  // Disable PDC channel
-  UART->UART_PTCR = UART_PTCR_RXTDIS | UART_PTCR_TXTDIS;
-
-  // Reset and disable receiver and transmitter
-  UART->UART_CR = UART_CR_RSTRX | UART_CR_RSTTX | UART_CR_RXDIS | UART_CR_TXDIS;
-
-  // Configure mode: 8bit, No parity, 1 bit stop
-  UART->UART_MR = UART_MR_CHMODE_NORMAL | US_MR_CHRL_8_BIT | US_MR_NBSTOP_1_BIT | UART_MR_PAR_NO;
-
-  // Configure baudrate (asynchronous, no oversampling) to BAUDRATE bauds
-  UART->UART_BRGR = (SystemCoreClock / (BAUDRATE << 4));
-
-  // Enable receiver and transmitter
-  UART->UART_CR = UART_CR_RXEN | UART_CR_TXEN;
-}
-
-// Send character through UART with no interrupts
-static void TX(char c) {
-  while (!(UART->UART_SR & UART_SR_TXRDY)) { WDT_Restart(WDT); sw_barrier(); };
-  UART->UART_THR = c;
-}
-
-// Send String through UART
-static void TX(const char* s) {
-  while (*s) TX(*s++);
-}
-
-static void TXDigit(uint32_t d) {
-  if (d < 10) TX((char)(d+'0'));
-  else if (d < 16) TX((char)(d+'A'-10));
-  else TX('?');
-}
-
-// Send Hex number thru UART
-static void TXHex(uint32_t v) {
-  TX("0x");
-  for (uint8_t i = 0; i < 8; i++, v <<= 4)
-    TXDigit((v >> 28) & 0xF);
-}
-
-// Send Decimal number thru UART
-static void TXDec(uint32_t v) {
-  if (!v) {
-    TX('0');
-    return;
-  }
-
-  char nbrs[14];
-  char *p = &nbrs[0];
-  while (v != 0) {
-    *p++ = '0' + (v % 10);
-    v /= 10;
-  }
-  do {
-    p--;
-    TX(*p);
-  } while (p != &nbrs[0]);
-}
-
-// Dump a backtrace entry
-static bool UnwReportOut(void* ctx, const UnwReport* bte) {
-  int* p = (int*)ctx;
-
-  (*p)++;
-  TX('#'); TXDec(*p); TX(" : ");
-  TX(bte->name?bte->name:"unknown"); TX('@'); TXHex(bte->function);
-  TX('+'); TXDec(bte->address - bte->function);
-  TX(" PC:");TXHex(bte->address); TX('\n');
-  return true;
-}
-
-#ifdef UNW_DEBUG
-  void UnwPrintf(const char* format, ...) {
-    char dest[256];
-    va_list argptr;
-    va_start(argptr, format);
-    vsprintf(dest, format, argptr);
-    va_end(argptr);
-    TX(&dest[0]);
-  }
-#endif
-
-/* Table of function pointers for passing to the unwinder */
-static const UnwindCallbacks UnwCallbacks = {
-  UnwReportOut,
-  UnwReadW,
-  UnwReadH,
-  UnwReadB
-  #ifdef UNW_DEBUG
-   , UnwPrintf
-  #endif
-};
-
-/**
- * HardFaultHandler_C:
- * This is called from the HardFault_HandlerAsm with a pointer the Fault stack
- * as the parameter. We can then read the values from the stack and place them
- * into local variables for ease of reading.
- * We then read the various Fault Status and Address Registers to help decode
- * cause of the fault.
- * The function ends with a BKPT instruction to force control back into the debugger
- */
-extern "C"
-void HardFault_HandlerC(unsigned long *sp, unsigned long lr, unsigned long cause) {
-
-  static const char* causestr[] = {
-    "NMI","Hard","Mem","Bus","Usage","Debug","WDT","RSTC"
-  };
-
-  UnwindFrame btf;
-
-  // Dump report to the Programming port (interrupts are DISABLED)
-  TXBegin();
-  TX("\n\n## Software Fault detected ##\n");
-  TX("Cause: "); TX(causestr[cause]); TX('\n');
-
-  TX("R0   : "); TXHex(((unsigned long)sp[0])); TX('\n');
-  TX("R1   : "); TXHex(((unsigned long)sp[1])); TX('\n');
-  TX("R2   : "); TXHex(((unsigned long)sp[2])); TX('\n');
-  TX("R3   : "); TXHex(((unsigned long)sp[3])); TX('\n');
-  TX("R12  : "); TXHex(((unsigned long)sp[4])); TX('\n');
-  TX("LR   : "); TXHex(((unsigned long)sp[5])); TX('\n');
-  TX("PC   : "); TXHex(((unsigned long)sp[6])); TX('\n');
-  TX("PSR  : "); TXHex(((unsigned long)sp[7])); TX('\n');
-
-  // Configurable Fault Status Register
-  // Consists of MMSR, BFSR and UFSR
-  TX("CFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED28)))); TX('\n');
-
-  // Hard Fault Status Register
-  TX("HFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED2C)))); TX('\n');
-
-  // Debug Fault Status Register
-  TX("DFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED30)))); TX('\n');
-
-  // Auxiliary Fault Status Register
-  TX("AFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED3C)))); TX('\n');
-
-  // Read the Fault Address Registers. These may not contain valid values.
-  // Check BFARVALID/MMARVALID to see if they are valid values
-  // MemManage Fault Address Register
-  TX("MMAR : "); TXHex((*((volatile unsigned long *)(0xE000ED34)))); TX('\n');
-
-  // Bus Fault Address Register
-  TX("BFAR : "); TXHex((*((volatile unsigned long *)(0xE000ED38)))); TX('\n');
-
-  TX("ExcLR: "); TXHex(lr); TX('\n');
-  TX("ExcSP: "); TXHex((unsigned long)sp); TX('\n');
-
-  btf.sp = ((unsigned long)sp) + 8*4; // The original stack pointer
-  btf.fp = btf.sp;
-  btf.lr = ((unsigned long)sp[5]);
-  btf.pc = ((unsigned long)sp[6]) | 1; // Force Thumb, as CORTEX only support it
-
-  // Perform a backtrace
-  TX("\nBacktrace:\n\n");
-  int ctr = 0;
-  UnwindStart(&btf, &UnwCallbacks, &ctr);
-
-  // Disable all NVIC interrupts
-  NVIC->ICER[0] = 0xFFFFFFFF;
-  NVIC->ICER[1] = 0xFFFFFFFF;
-
-  // Relocate VTOR table to default position
-  SCB->VTOR = 0;
-
-  // Disable USB
-  otg_disable();
-
-  // Restart watchdog
-  WDT_Restart(WDT);
-
-  // Reset controller
-  NVIC_SystemReset();
-  for (;;) WDT_Restart(WDT);
-}
-
-__attribute__((naked)) void NMI_Handler() {
-  __asm__ __volatile__ (
-    ".syntax unified" "\n\t"
-    A("tst lr, #4")
-    A("ite eq")
-    A("mrseq r0, msp")
-    A("mrsne r0, psp")
-    A("mov r1,lr")
-    A("mov r2,#0")
-    A("b HardFault_HandlerC")
-  );
-}
-
-__attribute__((naked)) void HardFault_Handler() {
-  __asm__ __volatile__ (
-    ".syntax unified" "\n\t"
-    A("tst lr, #4")
-    A("ite eq")
-    A("mrseq r0, msp")
-    A("mrsne r0, psp")
-    A("mov r1,lr")
-    A("mov r2,#1")
-    A("b HardFault_HandlerC")
-  );
-}
-
-__attribute__((naked)) void MemManage_Handler() {
-  __asm__ __volatile__ (
-    ".syntax unified" "\n\t"
-    A("tst lr, #4")
-    A("ite eq")
-    A("mrseq r0, msp")
-    A("mrsne r0, psp")
-    A("mov r1,lr")
-    A("mov r2,#2")
-    A("b HardFault_HandlerC")
-  );
-}
-
-__attribute__((naked)) void BusFault_Handler() {
-  __asm__ __volatile__ (
-    ".syntax unified" "\n\t"
-    A("tst lr, #4")
-    A("ite eq")
-    A("mrseq r0, msp")
-    A("mrsne r0, psp")
-    A("mov r1,lr")
-    A("mov r2,#3")
-    A("b HardFault_HandlerC")
-  );
-}
-
-__attribute__((naked)) void UsageFault_Handler() {
-  __asm__ __volatile__ (
-    ".syntax unified" "\n\t"
-    A("tst lr, #4")
-    A("ite eq")
-    A("mrseq r0, msp")
-    A("mrsne r0, psp")
-    A("mov r1,lr")
-    A("mov r2,#4")
-    A("b HardFault_HandlerC")
-  );
-}
-
-__attribute__((naked)) void DebugMon_Handler() {
-  __asm__ __volatile__ (
-    ".syntax unified" "\n\t"
-    A("tst lr, #4")
-    A("ite eq")
-    A("mrseq r0, msp")
-    A("mrsne r0, psp")
-    A("mov r1,lr")
-    A("mov r2,#5")
-    A("b HardFault_HandlerC")
-  );
-}
-
-/* This is NOT an exception, it is an interrupt handler - Nevertheless, the framing is the same */
-__attribute__((naked)) void WDT_Handler() {
-  __asm__ __volatile__ (
-    ".syntax unified" "\n\t"
-    A("tst lr, #4")
-    A("ite eq")
-    A("mrseq r0, msp")
-    A("mrsne r0, psp")
-    A("mov r1,lr")
-    A("mov r2,#6")
-    A("b HardFault_HandlerC")
-  );
-}
-
-__attribute__((naked)) void RSTC_Handler() {
-  __asm__ __volatile__ (
-    ".syntax unified" "\n\t"
-    A("tst lr, #4")
-    A("ite eq")
-    A("mrseq r0, msp")
-    A("mrsne r0, psp")
-    A("mov r1,lr")
-    A("mov r2,#7")
-    A("b HardFault_HandlerC")
-  );
-}
-
-#endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/HAL.cpp

@@ -14,13 +14,12 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
  */
 
 /**
- * Description: HAL for Arduino Due and compatible (SAM3X8E)
- *
- * For ARDUINO_ARCH_SAM
+ * HAL for Arduino Due and compatible (SAM3X8E)
  */
 
 #ifdef ARDUINO_ARCH_SAM
@@ -41,6 +40,8 @@ uint16_t HAL_adc_result;
 // Public functions
 // ------------------------
 
+TERN_(POSTMORTEM_DEBUGGING, extern void install_min_serial());
+
 // HAL initialization task
 void HAL_init() {
   // Initialize the USB stack
@@ -48,6 +49,7 @@ void HAL_init() {
     OUT_WRITE(SDSS, HIGH);  // Try to set SDSS inactive before any other SPI users start up
   #endif
   usb_task_init();
+  TERN_(POSTMORTEM_DEBUGGING, install_min_serial()); // Install the min serial handler
 }
 
 // HAL idle task
@@ -75,6 +77,8 @@ uint8_t HAL_get_reset_source() {
   }
 }
 
+void HAL_reboot() { rstc_start_software_reset(RSTC); }
+
 void _delay_ms(const int delay_ms) {
   // Todo: port for Due?
   delay(delay_ms);
@@ -103,4 +107,18 @@ uint16_t HAL_adc_get_result() {
   return HAL_adc_result;
 }
 
+// Forward the default serial ports
+#if USING_HW_SERIAL0
+  DefaultSerial1 MSerial0(false, Serial);
+#endif
+#if USING_HW_SERIAL1
+  DefaultSerial2 MSerial1(false, Serial1);
+#endif
+#if USING_HW_SERIAL2
+  DefaultSerial3 MSerial2(false, Serial2);
+#endif
+#if USING_HW_SERIAL3
+  DefaultSerial4 MSerial3(false, Serial3);
+#endif
+
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/HAL.h

@@ -16,81 +16,81 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
 
 /**
- * Description: HAL for Arduino Due and compatible (SAM3X8E)
- *
- * For ARDUINO_ARCH_SAM
+ * HAL for Arduino Due and compatible (SAM3X8E)
  */
 
 #define CPU_32_BIT
 
 #include "../shared/Marduino.h"
+#include "../shared/eeprom_if.h"
 #include "../shared/math_32bit.h"
 #include "../shared/HAL_SPI.h"
 #include "fastio.h"
 #include "watchdog.h"
-#include "timers.h"
 
 #include <stdint.h>
 
-// Define MYSERIAL0/1 before MarlinSerial includes!
+#include "../../core/serial_hook.h"
+
+typedef ForwardSerial1Class< decltype(Serial) > DefaultSerial1;
+typedef ForwardSerial1Class< decltype(Serial1) > DefaultSerial2;
+typedef ForwardSerial1Class< decltype(Serial2) > DefaultSerial3;
+typedef ForwardSerial1Class< decltype(Serial3) > DefaultSerial4;
+extern DefaultSerial1 MSerial0;
+extern DefaultSerial2 MSerial1;
+extern DefaultSerial3 MSerial2;
+extern DefaultSerial4 MSerial3;
+
+#define _MSERIAL(X) MSerial##X
+#define MSERIAL(X) _MSERIAL(X)
+
 #if SERIAL_PORT == -1 || ENABLED(EMERGENCY_PARSER)
-  #define MYSERIAL0 customizedSerial1
-#elif SERIAL_PORT == 0
-  #define MYSERIAL0 Serial
-#elif SERIAL_PORT == 1
-  #define MYSERIAL0 Serial1
-#elif SERIAL_PORT == 2
-  #define MYSERIAL0 Serial2
-#elif SERIAL_PORT == 3
-  #define MYSERIAL0 Serial3
+  #define MYSERIAL1 customizedSerial1
+#elif WITHIN(SERIAL_PORT, 0, 3)
+  #define MYSERIAL1 MSERIAL(SERIAL_PORT)
 #else
-  #error "The required SERIAL_PORT must be from -1 to 3. Please update your configuration."
+  #error "The required SERIAL_PORT must be from 0 to 3, or -1 for USB Serial."
 #endif
 
 #ifdef SERIAL_PORT_2
-  #if SERIAL_PORT_2 == SERIAL_PORT
-    #error "SERIAL_PORT_2 must be different from SERIAL_PORT. Please update your configuration."
-  #elif SERIAL_PORT_2 == -1 || ENABLED(EMERGENCY_PARSER)
-    #define MYSERIAL1 customizedSerial2
-  #elif SERIAL_PORT_2 == 0
-    #define MYSERIAL1 Serial
-  #elif SERIAL_PORT_2 == 1
-    #define MYSERIAL1 Serial1
-  #elif SERIAL_PORT_2 == 2
-    #define MYSERIAL1 Serial2
-  #elif SERIAL_PORT_2 == 3
-    #define MYSERIAL1 Serial3
+  #if SERIAL_PORT_2 == -1 || ENABLED(EMERGENCY_PARSER)
+    #define MYSERIAL2 customizedSerial2
+  #elif WITHIN(SERIAL_PORT_2, 0, 3)
+    #define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
   #else
-    #error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
+    #error "SERIAL_PORT_2 must be from 0 to 3, or -1 for USB Serial."
   #endif
-  #define NUM_SERIAL 2
-#else
-  #define NUM_SERIAL 1
 #endif
 
-#ifdef DGUS_SERIAL_PORT
-  #if DGUS_SERIAL_PORT == SERIAL_PORT
-    #error "DGUS_SERIAL_PORT must be different from SERIAL_PORT. Please update your configuration."
-  #elif defined(SERIAL_PORT_2) && DGUS_SERIAL_PORT == SERIAL_PORT_2
-    #error "DGUS_SERIAL_PORT must be different than SERIAL_PORT_2. Please update your configuration."
-  #elif DGUS_SERIAL_PORT == -1
-    #define DGUS_SERIAL internalDgusSerial
-  #elif DGUS_SERIAL_PORT == 0
-    #define DGUS_SERIAL Serial
-  #elif DGUS_SERIAL_PORT == 1
-    #define DGUS_SERIAL Serial1
-  #elif DGUS_SERIAL_PORT == 2
-    #define DGUS_SERIAL Serial2
-  #elif DGUS_SERIAL_PORT == 3
-    #define DGUS_SERIAL Serial3
+#ifdef SERIAL_PORT_3
+  #if SERIAL_PORT_3 == -1 || ENABLED(EMERGENCY_PARSER)
+    #define MYSERIAL3 customizedSerial3
+  #elif WITHIN(SERIAL_PORT_3, 0, 3)
+    #define MYSERIAL3 MSERIAL(SERIAL_PORT_3)
   #else
-    #error "DGUS_SERIAL_PORT must be from -1 to 3. Please update your configuration."
+    #error "SERIAL_PORT_3 must be from 0 to 3, or -1 for USB Serial."
+  #endif
+#endif
+
+#ifdef MMU2_SERIAL_PORT
+  #if WITHIN(MMU2_SERIAL_PORT, 0, 3)
+    #define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT)
+  #else
+    #error "MMU2_SERIAL_PORT must be from 0 to 3."
+  #endif
+#endif
+
+#ifdef LCD_SERIAL_PORT
+  #if WITHIN(LCD_SERIAL_PORT, 0, 3)
+    #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
+  #else
+    #error "LCD_SERIAL_PORT must be from 0 to 3."
   #endif
 #endif
 
@@ -100,16 +100,6 @@
 // On AVR this is in math.h?
 #define square(x) ((x)*(x))
 
-#ifndef strncpy_P
-  #define strncpy_P(dest, src, num) strncpy((dest), (src), (num))
-#endif
-
-// Fix bug in pgm_read_ptr
-#undef pgm_read_ptr
-#define pgm_read_ptr(addr) (*((void**)(addr)))
-#undef pgm_read_word
-#define pgm_read_word(addr) (*((uint16_t*)(addr)))
-
 typedef int8_t pin_t;
 
 #define SHARED_SERVOS HAS_SERVOS
@@ -130,13 +120,7 @@ void sei();                     // Enable interrupts
 void HAL_clear_reset_source();  // clear reset reason
 uint8_t HAL_get_reset_source(); // get reset reason
 
-//
-// EEPROM
-//
-void eeprom_write_byte(uint8_t *pos, unsigned char value);
-uint8_t eeprom_read_byte(uint8_t *pos);
-void eeprom_read_block (void *__dst, const void *__src, size_t __n);
-void eeprom_update_block (const void *__src, void *__dst, size_t __n);
+void HAL_reboot();
 
 //
 // ADC
@@ -144,15 +128,16 @@ void eeprom_update_block (const void *__src, void *__dst, size_t __n);
 extern uint16_t HAL_adc_result;     // result of last ADC conversion
 
 #ifndef analogInputToDigitalPin
-  #define analogInputToDigitalPin(p) ((p < 12u) ? (p) + 54u : -1)
+  #define analogInputToDigitalPin(p) ((p < 12U) ? (p) + 54U : -1)
 #endif
 
 #define HAL_ANALOG_SELECT(ch)
 
 inline void HAL_adc_init() {}//todo
 
-#define HAL_START_ADC(ch)   HAL_adc_start_conversion(ch)
+#define HAL_ADC_VREF         3.3
 #define HAL_ADC_RESOLUTION  10
+#define HAL_START_ADC(ch)   HAL_adc_start_conversion(ch)
 #define HAL_READ_ADC()      HAL_adc_result
 #define HAL_ADC_READY()     true
 
@@ -183,10 +168,16 @@ void HAL_init();
 //
 void _delay_ms(const int delay);
 
-#pragma GCC diagnostic push
-#pragma GCC diagnostic ignored "-Wunused-function"
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic push
+  #pragma GCC diagnostic ignored "-Wunused-function"
+#endif
+
 int freeMemory();
-#pragma GCC diagnostic pop
+
+#if GCC_VERSION <= 50000
+  #pragma GCC diagnostic pop
+#endif
 
 #ifdef __cplusplus
   extern "C" {

Marlin/src/HAL/DUE/HAL_MinSerial.cpp

@@ -0,0 +1,91 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#ifdef ARDUINO_ARCH_SAM
+
+#include "../../inc/MarlinConfigPre.h"
+
+#if ENABLED(POSTMORTEM_DEBUGGING)
+
+#include "../shared/HAL_MinSerial.h"
+
+#include <stdarg.h>
+
+static void TXBegin() {
+  // Disable UART interrupt in NVIC
+  NVIC_DisableIRQ( UART_IRQn );
+
+  // We NEED memory barriers to ensure Interrupts are actually disabled!
+  // ( https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the )
+  __DSB();
+  __ISB();
+
+  // Disable clock
+  pmc_disable_periph_clk( ID_UART );
+
+  // Configure PMC
+  pmc_enable_periph_clk( ID_UART );
+
+  // Disable PDC channel
+  UART->UART_PTCR = UART_PTCR_RXTDIS | UART_PTCR_TXTDIS;
+
+  // Reset and disable receiver and transmitter
+  UART->UART_CR = UART_CR_RSTRX | UART_CR_RSTTX | UART_CR_RXDIS | UART_CR_TXDIS;
+
+  // Configure mode: 8bit, No parity, 1 bit stop
+  UART->UART_MR = UART_MR_CHMODE_NORMAL | US_MR_CHRL_8_BIT | US_MR_NBSTOP_1_BIT | UART_MR_PAR_NO;
+
+  // Configure baudrate (asynchronous, no oversampling) to BAUDRATE bauds
+  UART->UART_BRGR = (SystemCoreClock / (BAUDRATE << 4));
+
+  // Enable receiver and transmitter
+  UART->UART_CR = UART_CR_RXEN | UART_CR_TXEN;
+}
+
+// A SW memory barrier, to ensure GCC does not overoptimize loops
+#define sw_barrier() __asm__ volatile("": : :"memory");
+static void TX(char c) {
+  while (!(UART->UART_SR & UART_SR_TXRDY)) { WDT_Restart(WDT); sw_barrier(); };
+  UART->UART_THR = c;
+}
+
+void install_min_serial() {
+  HAL_min_serial_init = &TXBegin;
+  HAL_min_serial_out = &TX;
+}
+
+#if DISABLED(DYNAMIC_VECTORTABLE)
+extern "C" {
+  __attribute__((naked)) void JumpHandler_ASM() {
+    __asm__ __volatile__ (
+      "b CommonHandler_ASM\n"
+    );
+  }
+  void __attribute__((naked, alias("JumpHandler_ASM"))) HardFault_Handler();
+  void __attribute__((naked, alias("JumpHandler_ASM"))) BusFault_Handler();
+  void __attribute__((naked, alias("JumpHandler_ASM"))) UsageFault_Handler();
+  void __attribute__((naked, alias("JumpHandler_ASM"))) MemManage_Handler();
+  void __attribute__((naked, alias("JumpHandler_ASM"))) NMI_Handler();
+}
+#endif
+
+#endif // POSTMORTEM_DEBUGGING
+#endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/HAL_SPI.cpp

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 
@@ -30,7 +30,7 @@
  */
 
 /**
- * Description: HAL for Arduino Due and compatible (SAM3X8E)
+ * HAL for Arduino Due and compatible (SAM3X8E)
  *
  * For ARDUINO_ARCH_SAM
  */
@@ -56,8 +56,8 @@
   #pragma GCC optimize (3)
 
   typedef uint8_t (*pfnSpiTransfer)(uint8_t b);
-  typedef void    (*pfnSpiRxBlock)(uint8_t* buf, uint32_t nbyte);
-  typedef void    (*pfnSpiTxBlock)(const uint8_t* buf, uint32_t nbyte);
+  typedef void    (*pfnSpiRxBlock)(uint8_t *buf, uint32_t nbyte);
+  typedef void    (*pfnSpiTxBlock)(const uint8_t *buf, uint32_t nbyte);
 
   /* ---------------- Macros to be able to access definitions from asm */
   #define _PORT(IO) DIO ##  IO ## _WPORT
@@ -69,10 +69,10 @@
 
   // run at ~8 .. ~10Mhz - Tx version (Rx data discarded)
   static uint8_t spiTransferTx0(uint8_t bout) { // using Mode 0
-    uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(MOSI_PIN)) + 0x30;  /* SODR of port */
-    uint32_t MOSI_MASK = PIN_MASK(MOSI_PIN);
-    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30;    /* SODR of port */
-    uint32_t SCK_MASK = PIN_MASK(SCK_PIN);
+    uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(SD_MOSI_PIN)) + 0x30;  /* SODR of port */
+    uint32_t MOSI_MASK = PIN_MASK(SD_MOSI_PIN);
+    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30;    /* SODR of port */
+    uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);
     uint32_t idx = 0;
 
     /* Negate bout, as the assembler requires a negated value */
@@ -154,9 +154,9 @@
   static uint8_t spiTransferRx0(uint8_t) { // using Mode 0
     uint32_t bin = 0;
     uint32_t work = 0;
-    uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(MISO_PIN))+0x3C, PIN_SHIFT(MISO_PIN));  /* PDSR of port in bitband area */
-    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30;    /* SODR of port */
-    uint32_t SCK_MASK = PIN_MASK(SCK_PIN);
+    uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(SD_MISO_PIN))+0x3C, PIN_SHIFT(SD_MISO_PIN));  /* PDSR of port in bitband area */
+    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30;    /* SODR of port */
+    uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);
 
     /* The software SPI routine */
     __asm__ __volatile__(
@@ -225,36 +225,36 @@
   static uint8_t spiTransfer1(uint8_t b) { // using Mode 0
     int bits = 8;
     do {
-      WRITE(MOSI_PIN, b & 0x80);
+      WRITE(SD_MOSI_PIN, b & 0x80);
       b <<= 1;        // little setup time
 
-      WRITE(SCK_PIN, HIGH);
+      WRITE(SD_SCK_PIN, HIGH);
       DELAY_NS(125);  // 10 cycles @ 84mhz
 
-      b |= (READ(MISO_PIN) != 0);
+      b |= (READ(SD_MISO_PIN) != 0);
 
-      WRITE(SCK_PIN, LOW);
+      WRITE(SD_SCK_PIN, LOW);
       DELAY_NS(125);  // 10 cycles @ 84mhz
     } while (--bits);
     return b;
   }
 
   // all the others
-  static uint32_t spiDelayCyclesX4 = (F_CPU) / 1000000; // 4µs => 125khz
+  static uint16_t spiDelayNS = 4000; // 4000ns => 125khz
 
   static uint8_t spiTransferX(uint8_t b) { // using Mode 0
     int bits = 8;
     do {
-      WRITE(MOSI_PIN, b & 0x80);
+      WRITE(SD_MOSI_PIN, b & 0x80);
       b <<= 1; // little setup time
 
-      WRITE(SCK_PIN, HIGH);
-      __delay_4cycles(spiDelayCyclesX4);
+      WRITE(SD_SCK_PIN, HIGH);
+      DELAY_NS(spiDelayNS);
 
-      b |= (READ(MISO_PIN) != 0);
+      b |= (READ(SD_MISO_PIN) != 0);
 
-      WRITE(SCK_PIN, LOW);
-      __delay_4cycles(spiDelayCyclesX4);
+      WRITE(SD_SCK_PIN, LOW);
+      DELAY_NS(spiDelayNS);
     } while (--bits);
     return b;
   }
@@ -270,11 +270,11 @@
   static pfnSpiTransfer spiTransferTx = (pfnSpiTransfer)spiTransferX;
 
   // Block transfers run at ~8 .. ~10Mhz - Tx version (Rx data discarded)
-  static void spiTxBlock0(const uint8_t* ptr, uint32_t todo) {
-    uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(MOSI_PIN)) + 0x30;  /* SODR of port */
-    uint32_t MOSI_MASK = PIN_MASK(MOSI_PIN);
-    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30;    /* SODR of port */
-    uint32_t SCK_MASK = PIN_MASK(SCK_PIN);
+  static void spiTxBlock0(const uint8_t *ptr, uint32_t todo) {
+    uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(SD_MOSI_PIN)) + 0x30;  /* SODR of port */
+    uint32_t MOSI_MASK = PIN_MASK(SD_MOSI_PIN);
+    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30;    /* SODR of port */
+    uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);
     uint32_t work = 0;
     uint32_t txval = 0;
 
@@ -349,12 +349,12 @@
     );
   }
 
-  static void spiRxBlock0(uint8_t* ptr, uint32_t todo) {
+  static void spiRxBlock0(uint8_t *ptr, uint32_t todo) {
     uint32_t bin = 0;
     uint32_t work = 0;
-    uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(MISO_PIN))+0x3C, PIN_SHIFT(MISO_PIN));  /* PDSR of port in bitband area */
-    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30;    /* SODR of port */
-    uint32_t SCK_MASK = PIN_MASK(SCK_PIN);
+    uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(SD_MISO_PIN))+0x3C, PIN_SHIFT(SD_MISO_PIN));  /* PDSR of port in bitband area */
+    uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30;    /* SODR of port */
+    uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);
 
     /* The software SPI routine */
     __asm__ __volatile__(
@@ -425,48 +425,48 @@
     );
   }
 
-  static void spiTxBlockX(const uint8_t* buf, uint32_t todo) {
+  static void spiTxBlockX(const uint8_t *buf, uint32_t todo) {
     do {
       (void)spiTransferTx(*buf++);
     } while (--todo);
   }
 
-  static void spiRxBlockX(uint8_t* buf, uint32_t todo) {
+  static void spiRxBlockX(uint8_t *buf, uint32_t todo) {
     do {
       *buf++ = spiTransferRx(0xFF);
     } while (--todo);
   }
 
-  // Pointers to generic functions for block tranfers
+  // Pointers to generic functions for block transfers
   static pfnSpiTxBlock spiTxBlock = (pfnSpiTxBlock)spiTxBlockX;
   static pfnSpiRxBlock spiRxBlock = (pfnSpiRxBlock)spiRxBlockX;
 
   #if MB(ALLIGATOR)
-    #define _SS_WRITE(S) WRITE(SS_PIN, S)
+    #define _SS_WRITE(S) WRITE(SD_SS_PIN, S)
   #else
     #define _SS_WRITE(S) NOOP
   #endif
 
   void spiBegin() {
-    SET_OUTPUT(SS_PIN);
+    SET_OUTPUT(SD_SS_PIN);
     _SS_WRITE(HIGH);
-    SET_OUTPUT(SCK_PIN);
-    SET_INPUT(MISO_PIN);
-    SET_OUTPUT(MOSI_PIN);
+    SET_OUTPUT(SD_SCK_PIN);
+    SET_INPUT(SD_MISO_PIN);
+    SET_OUTPUT(SD_MOSI_PIN);
   }
 
   uint8_t spiRec() {
     _SS_WRITE(LOW);
-    WRITE(MOSI_PIN, HIGH); // Output 1s 1
+    WRITE(SD_MOSI_PIN, HIGH); // Output 1s 1
     uint8_t b = spiTransferRx(0xFF);
     _SS_WRITE(HIGH);
     return b;
   }
 
-  void spiRead(uint8_t* buf, uint16_t nbyte) {
+  void spiRead(uint8_t *buf, uint16_t nbyte) {
     if (nbyte) {
       _SS_WRITE(LOW);
-      WRITE(MOSI_PIN, HIGH); // Output 1s 1
+      WRITE(SD_MOSI_PIN, HIGH); // Output 1s 1
       spiRxBlock(buf, nbyte);
       _SS_WRITE(HIGH);
     }
@@ -478,7 +478,7 @@
     _SS_WRITE(HIGH);
   }
 
-  void spiSendBlock(uint8_t token, const uint8_t* buf) {
+  void spiSendBlock(uint8_t token, const uint8_t *buf) {
     _SS_WRITE(LOW);
     (void)spiTransferTx(token);
     spiTxBlock(buf, 512);
@@ -510,7 +510,7 @@
         spiRxBlock = (pfnSpiRxBlock)spiRxBlockX;
         break;
       default:
-        spiDelayCyclesX4 = ((F_CPU) / 1000000) >> (6 - spiRate);
+        spiDelayNS = 4000 >> (6 - spiRate); // spiRate of 2 gives the maximum error with current CPU
         spiTransferTx = (pfnSpiTransfer)spiTransferX;
         spiTransferRx = (pfnSpiTransfer)spiTransferX;
         spiTxBlock = (pfnSpiTxBlock)spiTxBlockX;
@@ -519,8 +519,8 @@
     }
 
     _SS_WRITE(HIGH);
-    WRITE(MOSI_PIN, HIGH);
-    WRITE(SCK_PIN, LOW);
+    WRITE(SD_MOSI_PIN, HIGH);
+    WRITE(SD_SCK_PIN, LOW);
   }
 
   /** Begin SPI transaction, set clock, bit order, data mode */
@@ -575,38 +575,34 @@
 
       // Configure SPI pins
       PIO_Configure(
-         g_APinDescription[SCK_PIN].pPort,
-         g_APinDescription[SCK_PIN].ulPinType,
-         g_APinDescription[SCK_PIN].ulPin,
-         g_APinDescription[SCK_PIN].ulPinConfiguration);
+         g_APinDescription[SD_SCK_PIN].pPort,
+         g_APinDescription[SD_SCK_PIN].ulPinType,
+         g_APinDescription[SD_SCK_PIN].ulPin,
+         g_APinDescription[SD_SCK_PIN].ulPinConfiguration);
       PIO_Configure(
-         g_APinDescription[MOSI_PIN].pPort,
-         g_APinDescription[MOSI_PIN].ulPinType,
-         g_APinDescription[MOSI_PIN].ulPin,
-         g_APinDescription[MOSI_PIN].ulPinConfiguration);
+         g_APinDescription[SD_MOSI_PIN].pPort,
+         g_APinDescription[SD_MOSI_PIN].ulPinType,
+         g_APinDescription[SD_MOSI_PIN].ulPin,
+         g_APinDescription[SD_MOSI_PIN].ulPinConfiguration);
       PIO_Configure(
-         g_APinDescription[MISO_PIN].pPort,
-         g_APinDescription[MISO_PIN].ulPinType,
-         g_APinDescription[MISO_PIN].ulPin,
-         g_APinDescription[MISO_PIN].ulPinConfiguration);
+         g_APinDescription[SD_MISO_PIN].pPort,
+         g_APinDescription[SD_MISO_PIN].ulPinType,
+         g_APinDescription[SD_MISO_PIN].ulPin,
+         g_APinDescription[SD_MISO_PIN].ulPinConfiguration);
 
       // set master mode, peripheral select, fault detection
       SPI_Configure(SPI0, ID_SPI0, SPI_MR_MSTR | SPI_MR_MODFDIS | SPI_MR_PS);
       SPI_Enable(SPI0);
 
-      SET_OUTPUT(DAC0_SYNC);
-      #if EXTRUDERS > 1
-        SET_OUTPUT(DAC1_SYNC);
-        WRITE(DAC1_SYNC, HIGH);
+      SET_OUTPUT(DAC0_SYNC_PIN);
+      #if HAS_MULTI_EXTRUDER
+        OUT_WRITE(DAC1_SYNC_PIN, HIGH);
       #endif
-      SET_OUTPUT(SPI_EEPROM1_CS);
-      SET_OUTPUT(SPI_EEPROM2_CS);
-      SET_OUTPUT(SPI_FLASH_CS);
-      WRITE(DAC0_SYNC, HIGH);
-      WRITE(SPI_EEPROM1_CS, HIGH);
-      WRITE(SPI_EEPROM2_CS, HIGH);
-      WRITE(SPI_FLASH_CS, HIGH);
-      WRITE(SS_PIN, HIGH);
+      WRITE(DAC0_SYNC_PIN, HIGH);
+      OUT_WRITE(SPI_EEPROM1_CS_PIN, HIGH);
+      OUT_WRITE(SPI_EEPROM2_CS_PIN, HIGH);
+      OUT_WRITE(SPI_FLASH_CS_PIN, HIGH);
+      WRITE(SD_SS_PIN, HIGH);
 
       OUT_WRITE(SDSS, LOW);
 
@@ -645,7 +641,7 @@
     }
 
     // Read from SPI into buffer
-    void spiRead(uint8_t* buf, uint16_t nbyte) {
+    void spiRead(uint8_t *buf, uint16_t nbyte) {
       if (!nbyte) return;
       --nbyte;
       for (int i = 0; i < nbyte; i++) {
@@ -668,7 +664,7 @@
       //DELAY_US(1U);
     }
 
-    void spiSend(const uint8_t* buf, size_t nbyte) {
+    void spiSend(const uint8_t *buf, size_t nbyte) {
       if (!nbyte) return;
       --nbyte;
       for (size_t i = 0; i < nbyte; i++) {
@@ -689,7 +685,7 @@
       FLUSH_RX();
     }
 
-    void spiSend(uint32_t chan, const uint8_t* buf, size_t nbyte) {
+    void spiSend(uint32_t chan, const uint8_t *buf, size_t nbyte) {
       if (!nbyte) return;
       --nbyte;
       for (size_t i = 0; i < nbyte; i++) {
@@ -702,7 +698,7 @@
     }
 
     // Write from buffer to SPI
-    void spiSendBlock(uint8_t token, const uint8_t* buf) {
+    void spiSendBlock(uint8_t token, const uint8_t *buf) {
       SPI0->SPI_TDR = (uint32_t)token | SPI_PCS(SPI_CHAN);
       WHILE_TX(0);
       //WHILE_RX(0);
@@ -759,7 +755,6 @@
      *
      *  All of the above can be avoided by defining FORCE_SOFT_SPI to force the
      *  display to use software SPI.
-     *
      */
 
     void spiInit(uint8_t spiRate=6) {  // Default to slowest rate if not specified)
@@ -802,19 +797,19 @@
 
     uint8_t spiRec() { return (uint8_t)spiTransfer(0xFF); }
 
-    void spiRead(uint8_t* buf, uint16_t nbyte) {
+    void spiRead(uint8_t *buf, uint16_t nbyte) {
       for (int i = 0; i < nbyte; i++)
         buf[i] = spiTransfer(0xFF);
     }
 
     void spiSend(uint8_t data) { spiTransfer(data); }
 
-    void spiSend(const uint8_t* buf, size_t nbyte) {
+    void spiSend(const uint8_t *buf, size_t nbyte) {
       for (uint16_t i = 0; i < nbyte; i++)
         spiTransfer(buf[i]);
     }
 
-    void spiSendBlock(uint8_t token, const uint8_t* buf) {
+    void spiSendBlock(uint8_t token, const uint8_t *buf) {
       spiTransfer(token);
       for (uint16_t i = 0; i < 512; i++)
         spiTransfer(buf[i]);

Marlin/src/HAL/DUE/InterruptVectors.cpp

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 

Marlin/src/HAL/DUE/InterruptVectors.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/DUE/MarlinSPI.h

@@ -0,0 +1,26 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include <SPI.h>
+
+using MarlinSPI = SPIClass;

Marlin/src/HAL/DUE/MarlinSerial.cpp

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 
@@ -382,7 +382,7 @@ void MarlinSerial<Cfg>::flush() {
 }
 
 template<typename Cfg>
-void MarlinSerial<Cfg>::write(const uint8_t c) {
+size_t MarlinSerial<Cfg>::write(const uint8_t c) {
   _written = true;
 
   if (Cfg::TX_SIZE == 0) {
@@ -400,7 +400,7 @@ void MarlinSerial<Cfg>::write(const uint8_t c) {
     // XOFF char at the RX isr, but it is properly handled there
     if (!(HWUART->UART_IMR & UART_IMR_TXRDY) && (HWUART->UART_SR & UART_SR_TXRDY)) {
       HWUART->UART_THR = c;
-      return;
+      return 1;
     }
 
     const uint8_t i = (tx_buffer.head + 1) & (Cfg::TX_SIZE - 1);
@@ -428,6 +428,7 @@ void MarlinSerial<Cfg>::write(const uint8_t c) {
     // Enable TX isr - Non atomic, but it will eventually enable TX isr
     HWUART->UART_IER = UART_IER_TXRDY;
   }
+  return 1;
 }
 
 template<typename Cfg>
@@ -473,169 +474,21 @@ void MarlinSerial<Cfg>::flushTX() {
   }
 }
 
-/**
- * Imports from print.h
- */
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::print(char c, int base) {
-  print((long)c, base);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::print(unsigned char b, int base) {
-  print((unsigned long)b, base);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::print(int n, int base) {
-  print((long)n, base);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::print(unsigned int n, int base) {
-  print((unsigned long)n, base);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::print(long n, int base) {
-  if (base == 0) write(n);
-  else if (base == 10) {
-    if (n < 0) { print('-'); n = -n; }
-    printNumber(n, 10);
-  }
-  else
-    printNumber(n, base);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::print(unsigned long n, int base) {
-  if (base == 0) write(n);
-  else printNumber(n, base);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::print(double n, int digits) {
-  printFloat(n, digits);
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println() {
-  print('\r');
-  print('\n');
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(const String& s) {
-  print(s);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(const char c[]) {
-  print(c);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(char c, int base) {
-  print(c, base);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(unsigned char b, int base) {
-  print(b, base);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(int n, int base) {
-  print(n, base);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(unsigned int n, int base) {
-  print(n, base);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(long n, int base) {
-  print(n, base);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(unsigned long n, int base) {
-  print(n, base);
-  println();
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::println(double n, int digits) {
-  print(n, digits);
-  println();
-}
-
-// Private Methods
-template<typename Cfg>
-void MarlinSerial<Cfg>::printNumber(unsigned long n, uint8_t base) {
-  if (n) {
-    unsigned char buf[8 * sizeof(long)]; // Enough space for base 2
-    int8_t i = 0;
-    while (n) {
-      buf[i++] = n % base;
-      n /= base;
-    }
-    while (i--)
-      print((char)(buf[i] + (buf[i] < 10 ? '0' : 'A' - 10)));
-  }
-  else
-    print('0');
-}
-
-template<typename Cfg>
-void MarlinSerial<Cfg>::printFloat(double number, uint8_t digits) {
-  // Handle negative numbers
-  if (number < 0.0) {
-    print('-');
-    number = -number;
-  }
-
-  // Round correctly so that print(1.999, 2) prints as "2.00"
-  double rounding = 0.5;
-  LOOP_L_N(i, digits) rounding *= 0.1;
-  number += rounding;
-
-  // Extract the integer part of the number and print it
-  unsigned long int_part = (unsigned long)number;
-  double remainder = number - (double)int_part;
-  print(int_part);
-
-  // Print the decimal point, but only if there are digits beyond
-  if (digits) {
-    print('.');
-    // Extract digits from the remainder one at a time
-    while (digits--) {
-      remainder *= 10.0;
-      int toPrint = int(remainder);
-      print(toPrint);
-      remainder -= toPrint;
-    }
-  }
-}
 
 // If not using the USB port as serial port
-#if SERIAL_PORT >= 0
-  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>;      // Define
-  MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;   // Instantiate
+#if defined(SERIAL_PORT) && SERIAL_PORT >= 0
+  template class MarlinSerial< MarlinSerialCfg<SERIAL_PORT> >;
+  MSerialT1 customizedSerial1(MarlinSerialCfg<SERIAL_PORT>::EMERGENCYPARSER);
 #endif
 
 #if defined(SERIAL_PORT_2) && SERIAL_PORT_2 >= 0
-  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>;    // Define
-  MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2; // Instantiate
+  template class MarlinSerial< MarlinSerialCfg<SERIAL_PORT_2> >;
+  MSerialT2 customizedSerial2(MarlinSerialCfg<SERIAL_PORT_2>::EMERGENCYPARSER);
+#endif
+
+#if defined(SERIAL_PORT_3) && SERIAL_PORT_3 >= 0
+  template class MarlinSerial< MarlinSerialCfg<SERIAL_PORT_3> >;
+  MSerialT3 customizedSerial3(MarlinSerialCfg<SERIAL_PORT_3>::EMERGENCYPARSER);
 #endif
 
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/MarlinSerial.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -30,11 +30,7 @@
 #include <WString.h>
 
 #include "../../inc/MarlinConfigPre.h"
-
-#define DEC 10
-#define HEX 16
-#define OCT 8
-#define BIN 2
+#include "../../core/serial_hook.h"
 
 // Define constants and variables for buffering incoming serial data.  We're
 // using a ring buffer (I think), in which rx_buffer_head is the index of the
@@ -119,42 +115,15 @@ public:
   static int read();
   static void flush();
   static ring_buffer_pos_t available();
-  static void write(const uint8_t c);
+  static size_t write(const uint8_t c);
   static void flushTX();
 
+  static inline bool emergency_parser_enabled() { return Cfg::EMERGENCYPARSER; }
+
   FORCE_INLINE static uint8_t dropped() { return Cfg::DROPPED_RX ? rx_dropped_bytes : 0; }
   FORCE_INLINE static uint8_t buffer_overruns() { return Cfg::RX_OVERRUNS ? rx_buffer_overruns : 0; }
   FORCE_INLINE static uint8_t framing_errors() { return Cfg::RX_FRAMING_ERRORS ? rx_framing_errors : 0; }
   FORCE_INLINE static ring_buffer_pos_t rxMaxEnqueued() { return Cfg::MAX_RX_QUEUED ? rx_max_enqueued : 0; }
-
-  FORCE_INLINE static void write(const char* str) { while (*str) write(*str++); }
-  FORCE_INLINE static void write(const uint8_t* buffer, size_t size) { while (size--) write(*buffer++); }
-  FORCE_INLINE static void print(const String& s) { for (int i = 0; i < (int)s.length(); i++) write(s[i]); }
-  FORCE_INLINE static void print(const char* str) { write(str); }
-
-  static void print(char, int = 0);
-  static void print(unsigned char, int = 0);
-  static void print(int, int = DEC);
-  static void print(unsigned int, int = DEC);
-  static void print(long, int = DEC);
-  static void print(unsigned long, int = DEC);
-  static void print(double, int = 2);
-
-  static void println(const String& s);
-  static void println(const char[]);
-  static void println(char, int = 0);
-  static void println(unsigned char, int = 0);
-  static void println(int, int = DEC);
-  static void println(unsigned int, int = DEC);
-  static void println(long, int = DEC);
-  static void println(unsigned long, int = DEC);
-  static void println(double, int = 2);
-  static void println();
-  operator bool() { return true; }
-
-private:
-  static void printNumber(unsigned long, const uint8_t);
-  static void printFloat(double, uint8_t);
 };
 
 // Serial port configuration
@@ -171,10 +140,17 @@ struct MarlinSerialCfg {
   static constexpr bool MAX_RX_QUEUED     = ENABLED(SERIAL_STATS_MAX_RX_QUEUED);
 };
 
-#if SERIAL_PORT >= 0
-  extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
+#if defined(SERIAL_PORT) && SERIAL_PORT >= 0
+  typedef Serial1Class< MarlinSerial< MarlinSerialCfg<SERIAL_PORT> > > MSerialT1;
+  extern MSerialT1 customizedSerial1;
 #endif
 
 #if defined(SERIAL_PORT_2) && SERIAL_PORT_2 >= 0
-  extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2;
+  typedef Serial1Class< MarlinSerial< MarlinSerialCfg<SERIAL_PORT_2> > > MSerialT2;
+  extern MSerialT2 customizedSerial2;
+#endif
+
+#if defined(SERIAL_PORT_3) && SERIAL_PORT_3 >= 0
+  typedef Serial1Class< MarlinSerial< MarlinSerialCfg<SERIAL_PORT_3> > > MSerialT3;
+  extern MSerialT3 customizedSerial3;
 #endif

Marlin/src/HAL/DUE/MarlinSerialUSB.cpp

@@ -16,16 +16,16 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+#ifdef ARDUINO_ARCH_SAM
 
 /**
  * MarlinSerial_Due.cpp - Hardware serial library for Arduino DUE
  * Copyright (c) 2017 Eduardo José Tagle. All right reserved
  * Based on MarlinSerial for AVR, copyright (c) 2006 Nicholas Zambetti.  All right reserved.
  */
-#ifdef ARDUINO_ARCH_SAM
 
 #include "../../inc/MarlinConfig.h"
 
@@ -33,10 +33,6 @@
 
 #include "MarlinSerialUSB.h"
 
-#if ENABLED(EMERGENCY_PARSER)
-  #include "../../feature/e_parser.h"
-#endif
-
 // Imports from Atmel USB Stack/CDC implementation
 extern "C" {
   bool usb_task_cdc_isenabled();
@@ -50,10 +46,6 @@ extern "C" {
 // Pending character
 static int pending_char = -1;
 
-#if ENABLED(EMERGENCY_PARSER)
-  static EmergencyParser::State emergency_state; // = EP_RESET
-#endif
-
 // Public Methods
 void MarlinSerialUSB::begin(const long) {}
 
@@ -73,9 +65,7 @@ int MarlinSerialUSB::peek() {
 
   pending_char = udi_cdc_getc();
 
-  #if ENABLED(EMERGENCY_PARSER)
-    emergency_parser.update(emergency_state, (char)pending_char);
-  #endif
+  TERN_(EMERGENCY_PARSER, emergency_parser.update(static_cast<MSerialT1*>(this)->emergency_state, (char)pending_char));
 
   return pending_char;
 }
@@ -97,31 +87,27 @@ int MarlinSerialUSB::read() {
 
   int c = udi_cdc_getc();
 
-  #if ENABLED(EMERGENCY_PARSER)
-    emergency_parser.update(emergency_state, (char)c);
-  #endif
+  TERN_(EMERGENCY_PARSER, emergency_parser.update(static_cast<MSerialT1*>(this)->emergency_state, (char)c));
 
   return c;
 }
 
-bool MarlinSerialUSB::available() {
-    /* If Pending chars */
-  return pending_char >= 0 ||
-    /* or USB CDC enumerated and configured on the PC side and some
-       bytes where sent to us */
-      (usb_task_cdc_isenabled() && udi_cdc_is_rx_ready());
+int MarlinSerialUSB::available() {
+  if (pending_char > 0) return pending_char;
+  return pending_char == 0 ||
+    // or USB CDC enumerated and configured on the PC side and some bytes where sent to us */
+    (usb_task_cdc_isenabled() && udi_cdc_is_rx_ready());
 }
 
 void MarlinSerialUSB::flush() { }
-void MarlinSerialUSB::flushTX() { }
 
-void MarlinSerialUSB::write(const uint8_t c) {
+size_t MarlinSerialUSB::write(const uint8_t c) {
 
   /* Do not even bother sending anything if USB CDC is not enumerated
      or not configured on the PC side or there is no program on the PC
      listening to our messages */
   if (!usb_task_cdc_isenabled() || !usb_task_cdc_dtr_active())
-    return;
+    return 0;
 
   /* Wait until the PC has read the pending to be sent data */
   while (usb_task_cdc_isenabled() &&
@@ -133,161 +119,23 @@ void MarlinSerialUSB::write(const uint8_t c) {
      or not configured on the PC side or there is no program on the PC
      listening to our messages at this point */
   if (!usb_task_cdc_isenabled() || !usb_task_cdc_dtr_active())
-    return;
+    return 0;
 
   // Fifo full
   //  udi_cdc_signal_overrun();
   udi_cdc_putc(c);
-}
-
-/**
- * Imports from print.h
- */
-
-void MarlinSerialUSB::print(char c, int base) {
-  print((long)c, base);
-}
-
-void MarlinSerialUSB::print(unsigned char b, int base) {
-  print((unsigned long)b, base);
-}
-
-void MarlinSerialUSB::print(int n, int base) {
-  print((long)n, base);
-}
-
-void MarlinSerialUSB::print(unsigned int n, int base) {
-  print((unsigned long)n, base);
-}
-
-void MarlinSerialUSB::print(long n, int base) {
-  if (base == 0)
-    write(n);
-  else if (base == 10) {
-    if (n < 0) {
-      print('-');
-      n = -n;
-    }
-    printNumber(n, 10);
-  }
-  else
-    printNumber(n, base);
-}
-
-void MarlinSerialUSB::print(unsigned long n, int base) {
-  if (base == 0) write(n);
-  else printNumber(n, base);
-}
-
-void MarlinSerialUSB::print(double n, int digits) {
-  printFloat(n, digits);
-}
-
-void MarlinSerialUSB::println() {
-  print('\r');
-  print('\n');
-}
-
-void MarlinSerialUSB::println(const String& s) {
-  print(s);
-  println();
-}
-
-void MarlinSerialUSB::println(const char c[]) {
-  print(c);
-  println();
-}
-
-void MarlinSerialUSB::println(char c, int base) {
-  print(c, base);
-  println();
-}
-
-void MarlinSerialUSB::println(unsigned char b, int base) {
-  print(b, base);
-  println();
-}
-
-void MarlinSerialUSB::println(int n, int base) {
-  print(n, base);
-  println();
-}
-
-void MarlinSerialUSB::println(unsigned int n, int base) {
-  print(n, base);
-  println();
-}
-
-void MarlinSerialUSB::println(long n, int base) {
-  print(n, base);
-  println();
-}
-
-void MarlinSerialUSB::println(unsigned long n, int base) {
-  print(n, base);
-  println();
-}
-
-void MarlinSerialUSB::println(double n, int digits) {
-  print(n, digits);
-  println();
-}
-
-// Private Methods
-
-void MarlinSerialUSB::printNumber(unsigned long n, uint8_t base) {
-  if (n) {
-    unsigned char buf[8 * sizeof(long)]; // Enough space for base 2
-    int8_t i = 0;
-    while (n) {
-      buf[i++] = n % base;
-      n /= base;
-    }
-    while (i--)
-      print((char)(buf[i] + (buf[i] < 10 ? '0' : 'A' - 10)));
-  }
-  else
-    print('0');
-}
-
-void MarlinSerialUSB::printFloat(double number, uint8_t digits) {
-  // Handle negative numbers
-  if (number < 0.0) {
-    print('-');
-    number = -number;
-  }
-
-  // Round correctly so that print(1.999, 2) prints as "2.00"
-  double rounding = 0.5;
-  LOOP_L_N(i, digits)
-    rounding *= 0.1;
-
-  number += rounding;
-
-  // Extract the integer part of the number and print it
-  unsigned long int_part = (unsigned long)number;
-  double remainder = number - (double)int_part;
-  print(int_part);
-
-  // Print the decimal point, but only if there are digits beyond
-  if (digits) {
-    print('.');
-    // Extract digits from the remainder one at a time
-    while (digits--) {
-      remainder *= 10.0;
-      int toPrint = int(remainder);
-      print(toPrint);
-      remainder -= toPrint;
-    }
-  }
+  return 1;
 }
 
 // Preinstantiate
 #if SERIAL_PORT == -1
-  MarlinSerialUSB customizedSerial1;
+  MSerialT1 customizedSerial1(TERN0(EMERGENCY_PARSER, true));
 #endif
 #if SERIAL_PORT_2 == -1
-  MarlinSerialUSB customizedSerial2;
+  MSerialT2 customizedSerial2(TERN0(EMERGENCY_PARSER, true));
+#endif
+#if SERIAL_PORT_3 == -1
+  MSerialT3 customizedSerial3(TERN0(EMERGENCY_PARSER, true));
 #endif
 
 #endif // HAS_USB_SERIAL

Marlin/src/HAL/DUE/MarlinSerialUSB.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -27,73 +27,39 @@
  */
 
 #include "../../inc/MarlinConfig.h"
-
-#if HAS_USB_SERIAL
+#include "../../core/serial_hook.h"
 
 #include <WString.h>
 
-#define DEC 10
-#define HEX 16
-#define OCT 8
-#define BIN 2
-
-class MarlinSerialUSB {
-
-public:
-  MarlinSerialUSB() {};
-  static void begin(const long);
-  static void end();
-  static int peek();
-  static int read();
-  static void flush();
-  static void flushTX();
-  static bool available();
-  static void write(const uint8_t c);
+struct MarlinSerialUSB {
+  void begin(const long);
+  void end();
+  int peek();
+  int read();
+  void flush();
+  int available();
+  size_t write(const uint8_t c);
 
   #if ENABLED(SERIAL_STATS_DROPPED_RX)
-    FORCE_INLINE static uint32_t dropped() { return 0; }
+    FORCE_INLINE uint32_t dropped() { return 0; }
   #endif
 
   #if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
-    FORCE_INLINE static int rxMaxEnqueued() { return 0; }
+    FORCE_INLINE int rxMaxEnqueued() { return 0; }
   #endif
-
-  FORCE_INLINE static void write(const char* str) { while (*str) write(*str++); }
-  FORCE_INLINE static void write(const uint8_t* buffer, size_t size) { while (size--) write(*buffer++); }
-  FORCE_INLINE static void print(const String& s) { for (int i = 0; i < (int)s.length(); i++) write(s[i]); }
-  FORCE_INLINE static void print(const char* str) { write(str); }
-
-  static void print(char, int = 0);
-  static void print(unsigned char, int = 0);
-  static void print(int, int = DEC);
-  static void print(unsigned int, int = DEC);
-  static void print(long, int = DEC);
-  static void print(unsigned long, int = DEC);
-  static void print(double, int = 2);
-
-  static void println(const String& s);
-  static void println(const char[]);
-  static void println(char, int = 0);
-  static void println(unsigned char, int = 0);
-  static void println(int, int = DEC);
-  static void println(unsigned int, int = DEC);
-  static void println(long, int = DEC);
-  static void println(unsigned long, int = DEC);
-  static void println(double, int = 2);
-  static void println();
-  operator bool() { return true; }
-
-private:
-  static void printNumber(unsigned long, const uint8_t);
-  static void printFloat(double, uint8_t);
 };
 
 #if SERIAL_PORT == -1
-  extern MarlinSerialUSB customizedSerial1;
+  typedef Serial1Class<MarlinSerialUSB> MSerialT1;
+  extern MSerialT1 customizedSerial1;
 #endif
 
 #if SERIAL_PORT_2 == -1
-  extern MarlinSerialUSB customizedSerial2;
+  typedef Serial1Class<MarlinSerialUSB> MSerialT2;
+  extern MSerialT2 customizedSerial2;
 #endif
 
-#endif // HAS_USB_SERIAL
+#if SERIAL_PORT_3 == -1
+  typedef Serial1Class<MarlinSerialUSB> MSerialT3;
+  extern MSerialT3 customizedSerial3;
+#endif

Marlin/src/HAL/DUE/Servo.cpp

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 
@@ -44,7 +44,6 @@
 
 #if HAS_SERVOS
 
-#include "../shared/Marduino.h"
 #include "../shared/servo.h"
 #include "../shared/servo_private.h"
 

Marlin/src/HAL/DUE/Tone.cpp

@@ -18,20 +18,19 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 
 /**
  * Description: Tone function for Arduino Due and compatible (SAM3X8E)
- * Derived from http://forum.arduino.cc/index.php?topic=136500.msg2903012#msg2903012
+ * Derived from https://forum.arduino.cc/index.php?topic=136500.msg2903012#msg2903012
  */
 
 #ifdef ARDUINO_ARCH_SAM
 
 #include "../../inc/MarlinConfig.h"
 #include "HAL.h"
-#include "timers.h"
 
 static pin_t tone_pin;
 volatile static int32_t toggles;

Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp

@@ -16,11 +16,10 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 
-
 /**
  * Based on u8g_com_msp430_hw_spi.c
  *
@@ -52,25 +51,23 @@
  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
  * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
  */
 
 #ifdef __SAM3X8E__
 
 #include "../../../inc/MarlinConfigPre.h"
 
-#if HAS_GRAPHICAL_LCD
+#if HAS_MARLINUI_U8GLIB
 
-#include <U8glib.h>
+#include <U8glib-HAL.h>
 
 #include "../../../MarlinCore.h"
 
-void spiBegin();
-void spiInit(uint8_t spiRate);
-void spiSend(uint8_t b);
-void spiSend(const uint8_t* buf, size_t n);
+#ifndef LCD_SPI_SPEED
+  #define LCD_SPI_SPEED SPI_QUARTER_SPEED
+#endif
 
-#include "../../shared/Marduino.h"
+#include "../../shared/HAL_SPI.h"
 #include "../fastio.h"
 
 void u8g_SetPIOutput_DUE_hw_spi(u8g_t *u8g, uint8_t pin_index) {
@@ -101,11 +98,7 @@ uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
 
       spiBegin();
 
-      #ifndef SPI_SPEED
-        #define SPI_SPEED SPI_FULL_SPEED  // use same SPI speed as SD card
-      #endif
-      spiInit(2);
-
+      spiInit(LCD_SPI_SPEED);
       break;
 
     case U8G_COM_MSG_ADDRESS:                     /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
@@ -145,6 +138,6 @@ uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
   return 1;
 }
 
-#endif // HAS_GRAPHICAL_LCD
+#endif // HAS_MARLINUI_U8GLIB
 
-#endif //__SAM3X8E__
+#endif // __SAM3X8E__

Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_st7920_sw_spi.cpp

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 
@@ -59,9 +59,10 @@
 
 #if ENABLED(U8GLIB_ST7920)
 
+#include "../../../inc/MarlinConfig.h"
 #include "../../shared/Delay.h"
 
-#include <U8glib.h>
+#include <U8glib-HAL.h>
 
 #include "u8g_com_HAL_DUE_sw_spi_shared.h"
 
@@ -145,7 +146,7 @@ uint8_t u8g_com_HAL_DUE_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va
 }
 
 #if ENABLED(LIGHTWEIGHT_UI)
-  #include "../../../lcd/ultralcd.h"
+  #include "../../../lcd/marlinui.h"
   #include "../../shared/HAL_ST7920.h"
 
   #define ST7920_CS_PIN LCD_PINS_RS

Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 
@@ -57,17 +57,14 @@
 
 #include "../../../inc/MarlinConfigPre.h"
 
-#if HAS_GRAPHICAL_LCD && DISABLED(U8GLIB_ST7920)
-
-#undef SPI_SPEED
-#define SPI_SPEED 2  // About 2 MHz
+#if HAS_MARLINUI_U8GLIB && DISABLED(U8GLIB_ST7920)
 
 #include "u8g_com_HAL_DUE_sw_spi_shared.h"
 
 #include "../../shared/Marduino.h"
 #include "../../shared/Delay.h"
 
-#include <U8glib.h>
+#include <U8glib-HAL.h>
 
 #if ENABLED(FYSETC_MINI_12864)
   #define SPISEND_SW_DUE u8g_spiSend_sw_DUE_mode_3
@@ -144,5 +141,5 @@ uint8_t u8g_com_HAL_DUE_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
   return 1;
 }
 
-#endif // HAS_GRAPHICAL_LCD && !U8GLIB_ST7920
+#endif // HAS_MARLINUI_U8GLIB && !U8GLIB_ST7920
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 
@@ -57,11 +57,12 @@
 
 #include "../../../inc/MarlinConfigPre.h"
 
-#if HAS_GRAPHICAL_LCD
+#if HAS_MARLINUI_U8GLIB
 
+#include "../../../inc/MarlinConfig.h"
 #include "../../shared/Delay.h"
 
-#include <U8glib.h>
+#include <U8glib-HAL.h>
 
 #include "u8g_com_HAL_DUE_sw_spi_shared.h"
 
@@ -108,5 +109,5 @@ void u8g_spiSend_sw_DUE_mode_3(uint8_t val) { // 3.5MHz
   }
 }
 
-#endif // HAS_GRAPHICAL_LCD
+#endif // HAS_MARLINUI_U8GLIB
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.h

@@ -16,14 +16,14 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
 
 #include "../../../inc/MarlinConfigPre.h"
 #include "../../shared/Marduino.h"
-#include <U8glib.h>
+#include <U8glib-HAL.h>
 
 void u8g_SetPIOutput_DUE(u8g_t *u8g, uint8_t pin_index);
 void u8g_SetPILevel_DUE(u8g_t *u8g, uint8_t pin_index, uint8_t level);

Marlin/src/HAL/DUE/eeprom.cpp

@@ -1,82 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- *
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
- * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
- * Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-#ifdef ARDUINO_ARCH_SAM
-
-#include "../../inc/MarlinConfigPre.h"
-
-#if ENABLED(EEPROM_SETTINGS)
-
-#include "../../inc/MarlinConfig.h"
-#include "../shared/eeprom_api.h"
-
-#if !defined(E2END) && ENABLED(FLASH_EEPROM_EMULATION)
-  #define E2END 0xFFF // Default to Flash emulated EEPROM size (EepromEmulation_Due.cpp)
-#endif
-
-extern void eeprom_flush();
-
-bool PersistentStore::access_start() { return true; }
-
-bool PersistentStore::access_finish() {
-  #if ENABLED(FLASH_EEPROM_EMULATION)
-    eeprom_flush();
-  #endif
-  return true;
-}
-
-bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
-  while (size--) {
-    uint8_t * const p = (uint8_t * const)pos;
-    uint8_t v = *value;
-    // EEPROM has only ~100,000 write cycles,
-    // so only write bytes that have changed!
-    if (v != eeprom_read_byte(p)) {
-      eeprom_write_byte(p, v);
-      delay(2);
-      if (eeprom_read_byte(p) != v) {
-        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
-        return true;
-      }
-    }
-    crc16(crc, &v, 1);
-    pos++;
-    value++;
-  };
-  return false;
-}
-
-bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
-  do {
-    uint8_t c = eeprom_read_byte((uint8_t*)pos);
-    if (writing) *value = c;
-    crc16(crc, &c, 1);
-    pos++;
-    value++;
-  } while (--size);
-  return false;
-}
-
-size_t PersistentStore::capacity() { return E2END + 1; }
-
-#endif // EEPROM_SETTINGS
-#endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/eeprom_wired.cpp

@@ -0,0 +1,76 @@
+/**
+ * Marlin 3D Printer Firmware
+ *
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
+ * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
+ * Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#ifdef ARDUINO_ARCH_SAM
+
+#include "../../inc/MarlinConfig.h"
+
+#if USE_WIRED_EEPROM
+
+/**
+ * PersistentStore for Arduino-style EEPROM interface
+ * with simple implementations supplied by Marlin.
+ */
+
+#include "../shared/eeprom_if.h"
+#include "../shared/eeprom_api.h"
+
+#ifndef MARLIN_EEPROM_SIZE
+  #error "MARLIN_EEPROM_SIZE is required for I2C / SPI EEPROM."
+#endif
+size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
+bool PersistentStore::access_start()  { eeprom_init(); return true; }
+bool PersistentStore::access_finish() { return true; }
+
+bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
+  uint16_t written = 0;
+  while (size--) {
+    uint8_t * const p = (uint8_t * const)pos;
+    uint8_t v = *value;
+    if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
+      eeprom_write_byte(p, v);
+      if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
+      if (eeprom_read_byte(p) != v) {
+        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
+        return true;
+      }
+    }
+    crc16(crc, &v, 1);
+    pos++;
+    value++;
+  }
+  return false;
+}
+
+bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+  do {
+    uint8_t c = eeprom_read_byte((uint8_t*)pos);
+    if (writing) *value = c;
+    crc16(crc, &c, 1);
+    pos++;
+    value++;
+  } while (--size);
+  return false;
+}
+
+#endif // USE_WIRED_EEPROM
+#endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/endstop_interrupts.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -47,43 +47,27 @@ void endstop_ISR() { endstops.update(); }
 
 void setup_endstop_interrupts() {
   #define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
-  #if HAS_X_MAX
-    _ATTACH(X_MAX_PIN);
-  #endif
-  #if HAS_X_MIN
-    _ATTACH(X_MIN_PIN);
-  #endif
-  #if HAS_Y_MAX
-    _ATTACH(Y_MAX_PIN);
-  #endif
-  #if HAS_Y_MIN
-    _ATTACH(Y_MIN_PIN);
-  #endif
-  #if HAS_Z_MAX
-    _ATTACH(Z_MAX_PIN);
-  #endif
-  #if HAS_Z_MIN
-     _ATTACH(Z_MIN_PIN);
-  #endif
-  #if HAS_Z2_MAX
-    _ATTACH(Z2_MAX_PIN);
-  #endif
-  #if HAS_Z2_MIN
-    _ATTACH(Z2_MIN_PIN);
-  #endif
-  #if HAS_Z3_MAX
-    _ATTACH(Z3_MAX_PIN);
-  #endif
-  #if HAS_Z3_MIN
-    _ATTACH(Z3_MIN_PIN);
-  #endif
-  #if HAS_Z4_MAX
-    _ATTACH(Z4_MAX_PIN);
-  #endif
-  #if HAS_Z4_MIN
-    _ATTACH(Z4_MIN_PIN);
-  #endif
-  #if HAS_Z_MIN_PROBE_PIN
-    _ATTACH(Z_MIN_PROBE_PIN);
-  #endif
+  TERN_(HAS_X_MAX, _ATTACH(X_MAX_PIN));
+  TERN_(HAS_X_MIN, _ATTACH(X_MIN_PIN));
+  TERN_(HAS_Y_MAX, _ATTACH(Y_MAX_PIN));
+  TERN_(HAS_Y_MIN, _ATTACH(Y_MIN_PIN));
+  TERN_(HAS_Z_MAX, _ATTACH(Z_MAX_PIN));
+  TERN_(HAS_Z_MIN, _ATTACH(Z_MIN_PIN));
+  TERN_(HAS_X2_MAX, _ATTACH(X2_MAX_PIN));
+  TERN_(HAS_X2_MIN, _ATTACH(X2_MIN_PIN));
+  TERN_(HAS_Y2_MAX, _ATTACH(Y2_MAX_PIN));
+  TERN_(HAS_Y2_MIN, _ATTACH(Y2_MIN_PIN));
+  TERN_(HAS_Z2_MAX, _ATTACH(Z2_MAX_PIN));
+  TERN_(HAS_Z2_MIN, _ATTACH(Z2_MIN_PIN));
+  TERN_(HAS_Z3_MAX, _ATTACH(Z3_MAX_PIN));
+  TERN_(HAS_Z3_MIN, _ATTACH(Z3_MIN_PIN));
+  TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
+  TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
+  TERN_(HAS_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
+  TERN_(HAS_I_MAX, _ATTACH(I_MAX_PIN));
+  TERN_(HAS_I_MIN, _ATTACH(I_MIN_PIN));
+  TERN_(HAS_J_MAX, _ATTACH(J_MAX_PIN));
+  TERN_(HAS_J_MIN, _ATTACH(J_MIN_PIN));
+  TERN_(HAS_K_MAX, _ATTACH(K_MAX_PIN));
+  TERN_(HAS_K_MIN, _ATTACH(K_MIN_PIN));
 }

Marlin/src/HAL/DUE/fastio.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -33,7 +33,7 @@
  * For ARDUINO_ARCH_SAM
  * Note the code here was specifically crafted by disassembling what GCC produces
  * out of it, so GCC is able to optimize it out as much as possible to the least
- * amount of instructions. Be very carefull if you modify them, as "clean code"
+ * amount of instructions. Be very careful if you modify them, as "clean code"
  * leads to less efficient compiled code!!
  */
 
@@ -50,7 +50,7 @@
 #define PWM_PIN(P)              WITHIN(P, 2, 13)
 
 #ifndef MASK
-  #define MASK(PIN) (1 << PIN)
+  #define MASK(PIN) _BV(PIN)
 #endif
 
 /**
@@ -58,7 +58,7 @@
  *
  * Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW);
  *
- * Why double up on these macros? see http://gcc.gnu.org/onlinedocs/cpp/Stringification.html
+ * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/cpp/Stringification.html
  */
 
 // Read a pin
@@ -163,6 +163,9 @@
 #define SET_INPUT(IO)        _SET_INPUT(IO)
 // Set pin as input with pullup (wrapper)
 #define SET_INPUT_PULLUP(IO) do{ _SET_INPUT(IO); _PULLUP(IO, HIGH); }while(0)
+// Set pin as input with pulldown (substitution)
+#define SET_INPUT_PULLDOWN   SET_INPUT
+
 // Set pin as output (wrapper) -  reads the pin and sets the output to that value
 #define SET_OUTPUT(IO)       _SET_OUTPUT(IO)
 // Set pin as PWM
@@ -174,7 +177,7 @@
 #define IS_OUTPUT(IO)        ((digitalPinToPort(IO)->PIO_OSR & digitalPinToBitMask(IO)) != 0)
 
 // Shorthand
-#define OUT_WRITE(IO,V)       { SET_OUTPUT(IO); WRITE(IO,V); }
+#define OUT_WRITE(IO,V)      do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0)
 
 // digitalRead/Write wrappers
 #define extDigitalRead(IO)    digitalRead(IO)
@@ -477,7 +480,7 @@
 #define DIO91_PIN 15
 #define DIO91_WPORT PIOB
 
-#if ARDUINO_SAM_ARCHIM
+#ifdef ARDUINO_SAM_ARCHIM
 
   #define DIO92_PIN 11
   #define DIO92_WPORT PIOC

Marlin/src/HAL/DUE/fastio/G2_PWM.cpp

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 
@@ -154,7 +154,7 @@ void Stepper::digipot_init() {
   NVIC_SetPriority(PWM_IRQn, NVIC_EncodePriority(0, 10, 0));  // normal priority for PWM module (can stand some jitter on the Vref signals)
 }
 
-void Stepper::digipot_current(const uint8_t driver, const int16_t current) {
+void Stepper::set_digipot_current(const uint8_t driver, const int16_t current) {
 
   if (!(PWM->PWM_CH_NUM[0].PWM_CPRD == PWM_PERIOD_US)) digipot_init();  // Init PWM system if needed
 

Marlin/src/HAL/DUE/fastio/G2_PWM.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/DUE/fastio/G2_pins.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/DUE/inc/Conditionals_LCD.h

@@ -16,7 +16,11 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
+
+#if HAS_SPI_TFT || HAS_FSMC_TFT
+  #error "Sorry! TFT displays are not available for HAL/DUE."
+#endif

Marlin/src/HAL/DUE/inc/Conditionals_adv.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once

Marlin/src/HAL/DUE/inc/Conditionals_post.h

@@ -16,13 +16,13 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
 
 #if USE_FALLBACK_EEPROM
-  #undef SRAM_EEPROM_EMULATION
-  #undef SDCARD_EEPROM_EMULATION
   #define FLASH_EEPROM_EMULATION
+#elif EITHER(I2C_EEPROM, SPI_EEPROM)
+  #define USE_SHARED_EEPROM 1
 #endif

Marlin/src/HAL/DUE/inc/SanityCheck.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -40,7 +40,7 @@
  * Usually the hardware SPI pins are only available to the LCD. This makes the DUE hard SPI used at the same time
  * as the TMC2130 soft SPI the most common setup.
  */
-#define _IS_HW_SPI(P) (defined(TMC_SW_##P) && (TMC_SW_##P == MOSI_PIN || TMC_SW_##P == MISO_PIN || TMC_SW_##P == SCK_PIN))
+#define _IS_HW_SPI(P) (defined(TMC_SW_##P) && (TMC_SW_##P == SD_MOSI_PIN || TMC_SW_##P == SD_MISO_PIN || TMC_SW_##P == SD_SCK_PIN))
 
 #if ENABLED(SDSUPPORT) && HAS_DRIVER(TMC2130)
   #if ENABLED(TMC_USE_SW_SPI)
@@ -52,10 +52,10 @@
   #endif
 #endif
 
-#if ENABLED(FAST_PWM_FAN)
-  #error "FAST_PWM_FAN is not yet implemented for this platform."
+#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY
+  #error "Features requiring Hardware PWM (FAST_PWM_FAN, SPINDLE_LASER_FREQUENCY) are not yet supported on DUE."
 #endif
 
 #if HAS_TMC_SW_SERIAL
-  #error "TMC220x Software Serial is not supported on this platform."
+  #error "TMC220x Software Serial is not supported on the DUE platform."
 #endif

Marlin/src/HAL/DUE/pinsDebug.h

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
@@ -13,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 
@@ -64,6 +67,7 @@
 #define PRINT_PORT(p)
 #define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
 #define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%02d"), p); SERIAL_ECHO(buffer); }while(0)
+#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)
 #define GET_ARRAY_PIN(p) pin_array[p].pin
 #define GET_ARRAY_IS_DIGITAL(p) pin_array[p].is_digital
 #define VALID_PIN(pin) (pin >= 0 && pin < (int8_t)NUMBER_PINS_TOTAL ? 1 : 0)
@@ -86,7 +90,7 @@ bool GET_PINMODE(int8_t pin) {  // 1: output, 0: input
 void pwm_details(int32_t pin) {
   if (pwm_status(pin)) {
     uint32_t chan = g_APinDescription[pin].ulPWMChannel;
-    SERIAL_ECHOPAIR("PWM = ", PWM_INTERFACE->PWM_CH_NUM[chan].PWM_CDTY);
+    SERIAL_ECHOPGM("PWM = ", PWM_INTERFACE->PWM_CH_NUM[chan].PWM_CDTY);
   }
 }
 
@@ -179,5 +183,4 @@ void pwm_details(int32_t pin) {
  * ----------------+--------
  *  ID             |  PB11
  *  VBOF           |  PB10
- *
  */

Marlin/src/HAL/DUE/spi_pins.h

@@ -16,7 +16,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
@@ -43,22 +43,22 @@
     #define SPI_PIN         87
     #define SPI_CHAN         1
   #endif
-  #define SCK_PIN           76
-  #define MISO_PIN          74
-  #define MOSI_PIN          75
+  #define SD_SCK_PIN        76
+  #define SD_MISO_PIN       74
+  #define SD_MOSI_PIN       75
 #else
   // defaults
   #define DUE_SOFTWARE_SPI
-  #ifndef SCK_PIN
-    #define SCK_PIN           52
+  #ifndef SD_SCK_PIN
+    #define SD_SCK_PIN      52
   #endif
-  #ifndef MISO_PIN
-    #define MISO_PIN          50
+  #ifndef SD_MISO_PIN
+    #define SD_MISO_PIN     50
   #endif
-  #ifndef MOSI_PIN
-    #define MOSI_PIN          51
+  #ifndef SD_MOSI_PIN
+    #define SD_MOSI_PIN     51
   #endif
 #endif
 
 /* A.28, A.29, B.21, C.26, C.29 */
-#define SS_PIN            SDSS
+#define SD_SS_PIN         SDSS

Marlin/src/HAL/DUE/timers.cpp

@@ -16,14 +16,12 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 
 /**
- * Description: HAL for Arduino Due and compatible (SAM3X8E)
- *
- * For ARDUINO_ARCH_SAM
+ * HAL Timers for Arduino Due and compatible (SAM3X8E)
  */
 
 #ifdef ARDUINO_ARCH_SAM
@@ -34,8 +32,6 @@
 #include "../../inc/MarlinConfig.h"
 #include "HAL.h"
 
-#include "timers.h"
-
 // ------------------------
 // Local defines
 // ------------------------
@@ -125,7 +121,7 @@ void HAL_timer_disable_interrupt(const uint8_t timer_num) {
 
 // missing from CMSIS: Check if interrupt is enabled or not
 static bool NVIC_GetEnabledIRQ(IRQn_Type IRQn) {
-  return (NVIC->ISER[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F))) != 0;
+  return TEST(NVIC->ISER[uint32_t(IRQn) >> 5], uint32_t(IRQn) & 0x1F);
 }
 
 bool HAL_timer_interrupt_enabled(const uint8_t timer_num) {

Marlin/src/HAL/DUE/timers.h

@@ -15,15 +15,13 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
 #pragma once
 
 /**
- * HAL for Arduino Due and compatible (SAM3X8E)
- *
- * For ARDUINO_ARCH_SAM
+ * HAL Timers for Arduino Due and compatible (SAM3X8E)
  */
 
 #include <stdint.h>
@@ -40,11 +38,17 @@ typedef uint32_t hal_timer_t;
 #define HAL_TIMER_RATE         ((F_CPU) / 2)    // frequency of timers peripherals
 
 #ifndef STEP_TIMER_NUM
-#define STEP_TIMER_NUM 2  // index of timer to use for stepper
+  #define STEP_TIMER_NUM        2  // Timer Index for Stepper
+#endif
+#ifndef PULSE_TIMER_NUM
+  #define PULSE_TIMER_NUM       STEP_TIMER_NUM
+#endif
+#ifndef TEMP_TIMER_NUM
+  #define TEMP_TIMER_NUM        4  // Timer Index for Temperature
+#endif
+#ifndef TONE_TIMER_NUM
+  #define TONE_TIMER_NUM        6  // index of timer to use for beeper tones
 #endif
-#define TEMP_TIMER_NUM 4  // index of timer to use for temperature
-#define PULSE_TIMER_NUM STEP_TIMER_NUM
-#define TONE_TIMER_NUM 6  // index of timer to use for beeper tones
 
 #define TEMP_TIMER_FREQUENCY   1000 // temperature interrupt frequency
 
@@ -66,8 +70,12 @@ typedef uint32_t hal_timer_t;
 #ifndef HAL_STEP_TIMER_ISR
   #define HAL_STEP_TIMER_ISR() void TC2_Handler()
 #endif
-#define HAL_TEMP_TIMER_ISR()  void TC4_Handler()
-#define HAL_TONE_TIMER_ISR()  void TC6_Handler()
+#ifndef HAL_TEMP_TIMER_ISR
+  #define HAL_TEMP_TIMER_ISR() void TC4_Handler()
+#endif
+#ifndef HAL_TONE_TIMER_ISR
+  #define HAL_TONE_TIMER_ISR() void TC6_Handler()
+#endif
 
 // ------------------------
 // Types

Marlin/src/HAL/DUE/upload_extra_script.py

@@ -0,0 +1,18 @@
+#
+# Set upload_command
+#
+#  Windows: bossac.exe
+#  Other: leave unchanged
+#
+
+import platform
+current_OS = platform.system()
+
+if current_OS == 'Windows':
+
+	Import("env")
+
+	# Use bossac.exe on Windows
+	env.Replace(
+	    UPLOADCMD="bossac --info --unlock --write --verify --reset --erase -U false --boot $SOURCE"
+	)

Marlin/src/HAL/DUE/usb/arduino_due_x.h

@@ -43,7 +43,7 @@
 #pragma once
 
 /**
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 /**
@@ -71,7 +71,7 @@
 /* ------------------------------------------------------------------------ */
 
 /**
- * \page arduino_due_x_board_info "Arduino Due/X - Board informations"
+ * \page arduino_due_x_board_info "Arduino Due/X - Board information"
  * This page lists several definition related to the board description.
  *
  */
@@ -93,5 +93,5 @@
 #define USB_VBOF_GPIO               (PIO_PB10_IDX)
 #define USB_VBOF_FLAGS              (PIO_PERIPH_A | PIO_DEFAULT)
 /*! Active level of the USB_VBOF output pin. */
-#define USB_VBOF_ACTIVE_LEVEL       LOW
+#define USB_VBOF_ACTIVE_STATE       LOW
 /* ------------------------------------------------------------------------ */

Marlin/src/HAL/DUE/usb/compiler.h

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef UTILS_COMPILER_H
@@ -173,11 +173,11 @@
 #   define __always_inline   __forceinline
 #elif (defined __GNUC__)
 #ifdef __always_inline
-#	undef __always_inline
+# undef __always_inline
 #endif
-#	define __always_inline   inline __attribute__((__always_inline__))
+# define __always_inline   inline __attribute__((__always_inline__))
 #elif (defined __ICCARM__)
-#	define __always_inline   _Pragma("inline=forced")
+# define __always_inline   _Pragma("inline=forced")
 #endif
 
 /**
@@ -188,11 +188,11 @@
  * heuristics and not inline the function.
  */
 #ifdef __CC_ARM
-#   define __no_inline   __attribute__((noinline))
+# define __no_inline   __attribute__((noinline))
 #elif (defined __GNUC__)
-#	define __no_inline   __attribute__((__noinline__))
+# define __no_inline   __attribute__((__noinline__))
 #elif (defined __ICCARM__)
-#	define __no_inline   _Pragma("inline=never")
+# define __no_inline   _Pragma("inline=never")
 #endif
 
 /*! \brief This macro is used to test fatal errors.
@@ -211,9 +211,9 @@
 #  else
 #undef TEST_SUITE_DEFINE_ASSERT_MACRO
 #    define Assert(expr) \
-	{\
-		if (!(expr)) while (true);\
-	}
+  {\
+    if (!(expr)) while (true);\
+  }
 #  endif
 #else
 #  define Assert(expr) ((void) 0)
@@ -609,37 +609,37 @@ typedef struct
 #   define clz(u)              ((u) ? __CLZ(u) : 32)
 #else
 #   define clz(u)              (((u) == 0)          ? 32 : \
-                                ((u) & (1ul << 31)) ?  0 : \
-                                ((u) & (1ul << 30)) ?  1 : \
-                                ((u) & (1ul << 29)) ?  2 : \
-                                ((u) & (1ul << 28)) ?  3 : \
-                                ((u) & (1ul << 27)) ?  4 : \
-                                ((u) & (1ul << 26)) ?  5 : \
-                                ((u) & (1ul << 25)) ?  6 : \
-                                ((u) & (1ul << 24)) ?  7 : \
-                                ((u) & (1ul << 23)) ?  8 : \
-                                ((u) & (1ul << 22)) ?  9 : \
-                                ((u) & (1ul << 21)) ? 10 : \
-                                ((u) & (1ul << 20)) ? 11 : \
-                                ((u) & (1ul << 19)) ? 12 : \
-                                ((u) & (1ul << 18)) ? 13 : \
-                                ((u) & (1ul << 17)) ? 14 : \
-                                ((u) & (1ul << 16)) ? 15 : \
-                                ((u) & (1ul << 15)) ? 16 : \
-                                ((u) & (1ul << 14)) ? 17 : \
-                                ((u) & (1ul << 13)) ? 18 : \
-                                ((u) & (1ul << 12)) ? 19 : \
-                                ((u) & (1ul << 11)) ? 20 : \
-                                ((u) & (1ul << 10)) ? 21 : \
-                                ((u) & (1ul <<  9)) ? 22 : \
-                                ((u) & (1ul <<  8)) ? 23 : \
-                                ((u) & (1ul <<  7)) ? 24 : \
-                                ((u) & (1ul <<  6)) ? 25 : \
-                                ((u) & (1ul <<  5)) ? 26 : \
-                                ((u) & (1ul <<  4)) ? 27 : \
-                                ((u) & (1ul <<  3)) ? 28 : \
-                                ((u) & (1ul <<  2)) ? 29 : \
-                                ((u) & (1ul <<  1)) ? 30 : \
+                                ((u) & (1UL << 31)) ?  0 : \
+                                ((u) & (1UL << 30)) ?  1 : \
+                                ((u) & (1UL << 29)) ?  2 : \
+                                ((u) & (1UL << 28)) ?  3 : \
+                                ((u) & (1UL << 27)) ?  4 : \
+                                ((u) & (1UL << 26)) ?  5 : \
+                                ((u) & (1UL << 25)) ?  6 : \
+                                ((u) & (1UL << 24)) ?  7 : \
+                                ((u) & (1UL << 23)) ?  8 : \
+                                ((u) & (1UL << 22)) ?  9 : \
+                                ((u) & (1UL << 21)) ? 10 : \
+                                ((u) & (1UL << 20)) ? 11 : \
+                                ((u) & (1UL << 19)) ? 12 : \
+                                ((u) & (1UL << 18)) ? 13 : \
+                                ((u) & (1UL << 17)) ? 14 : \
+                                ((u) & (1UL << 16)) ? 15 : \
+                                ((u) & (1UL << 15)) ? 16 : \
+                                ((u) & (1UL << 14)) ? 17 : \
+                                ((u) & (1UL << 13)) ? 18 : \
+                                ((u) & (1UL << 12)) ? 19 : \
+                                ((u) & (1UL << 11)) ? 20 : \
+                                ((u) & (1UL << 10)) ? 21 : \
+                                ((u) & (1UL <<  9)) ? 22 : \
+                                ((u) & (1UL <<  8)) ? 23 : \
+                                ((u) & (1UL <<  7)) ? 24 : \
+                                ((u) & (1UL <<  6)) ? 25 : \
+                                ((u) & (1UL <<  5)) ? 26 : \
+                                ((u) & (1UL <<  4)) ? 27 : \
+                                ((u) & (1UL <<  3)) ? 28 : \
+                                ((u) & (1UL <<  2)) ? 29 : \
+                                ((u) & (1UL <<  1)) ? 30 : \
                                 31)
 #endif
 #endif
@@ -654,38 +654,38 @@ typedef struct
 #if (defined __GNUC__) || (defined __CC_ARM)
 #   define ctz(u)              ((u) ? __builtin_ctz(u) : 32)
 #else
-#   define ctz(u)              ((u) & (1ul <<  0) ?  0 : \
-                                (u) & (1ul <<  1) ?  1 : \
-                                (u) & (1ul <<  2) ?  2 : \
-                                (u) & (1ul <<  3) ?  3 : \
-                                (u) & (1ul <<  4) ?  4 : \
-                                (u) & (1ul <<  5) ?  5 : \
-                                (u) & (1ul <<  6) ?  6 : \
-                                (u) & (1ul <<  7) ?  7 : \
-                                (u) & (1ul <<  8) ?  8 : \
-                                (u) & (1ul <<  9) ?  9 : \
-                                (u) & (1ul << 10) ? 10 : \
-                                (u) & (1ul << 11) ? 11 : \
-                                (u) & (1ul << 12) ? 12 : \
-                                (u) & (1ul << 13) ? 13 : \
-                                (u) & (1ul << 14) ? 14 : \
-                                (u) & (1ul << 15) ? 15 : \
-                                (u) & (1ul << 16) ? 16 : \
-                                (u) & (1ul << 17) ? 17 : \
-                                (u) & (1ul << 18) ? 18 : \
-                                (u) & (1ul << 19) ? 19 : \
-                                (u) & (1ul << 20) ? 20 : \
-                                (u) & (1ul << 21) ? 21 : \
-                                (u) & (1ul << 22) ? 22 : \
-                                (u) & (1ul << 23) ? 23 : \
-                                (u) & (1ul << 24) ? 24 : \
-                                (u) & (1ul << 25) ? 25 : \
-                                (u) & (1ul << 26) ? 26 : \
-                                (u) & (1ul << 27) ? 27 : \
-                                (u) & (1ul << 28) ? 28 : \
-                                (u) & (1ul << 29) ? 29 : \
-                                (u) & (1ul << 30) ? 30 : \
-                                (u) & (1ul << 31) ? 31 : \
+#   define ctz(u)              ((u) & (1UL <<  0) ?  0 : \
+                                (u) & (1UL <<  1) ?  1 : \
+                                (u) & (1UL <<  2) ?  2 : \
+                                (u) & (1UL <<  3) ?  3 : \
+                                (u) & (1UL <<  4) ?  4 : \
+                                (u) & (1UL <<  5) ?  5 : \
+                                (u) & (1UL <<  6) ?  6 : \
+                                (u) & (1UL <<  7) ?  7 : \
+                                (u) & (1UL <<  8) ?  8 : \
+                                (u) & (1UL <<  9) ?  9 : \
+                                (u) & (1UL << 10) ? 10 : \
+                                (u) & (1UL << 11) ? 11 : \
+                                (u) & (1UL << 12) ? 12 : \
+                                (u) & (1UL << 13) ? 13 : \
+                                (u) & (1UL << 14) ? 14 : \
+                                (u) & (1UL << 15) ? 15 : \
+                                (u) & (1UL << 16) ? 16 : \
+                                (u) & (1UL << 17) ? 17 : \
+                                (u) & (1UL << 18) ? 18 : \
+                                (u) & (1UL << 19) ? 19 : \
+                                (u) & (1UL << 20) ? 20 : \
+                                (u) & (1UL << 21) ? 21 : \
+                                (u) & (1UL << 22) ? 22 : \
+                                (u) & (1UL << 23) ? 23 : \
+                                (u) & (1UL << 24) ? 24 : \
+                                (u) & (1UL << 25) ? 25 : \
+                                (u) & (1UL << 26) ? 26 : \
+                                (u) & (1UL << 27) ? 27 : \
+                                (u) & (1UL << 28) ? 28 : \
+                                (u) & (1UL << 29) ? 29 : \
+                                (u) & (1UL << 30) ? 30 : \
+                                (u) & (1UL << 31) ? 31 : \
                                 32)
 #endif
 #endif
@@ -1106,17 +1106,16 @@ static inline uint16_t convert_byte_array_to_16_bit(uint8_t *data)
 /* Converts a 8 Byte array into a 32-Bit value */
 static inline uint32_t convert_byte_array_to_32_bit(uint8_t *data)
 {
-	union
-	{
-		uint32_t u32;
-		uint8_t u8[8];
-	}long_addr;
-	uint8_t index;
-	for (index = 0; index < 4; index++)
-	{
-		long_addr.u8[index] = *data++;
-	}
-	return long_addr.u32;
+  union
+  {
+    uint32_t u32;
+    uint8_t u8[8];
+  }long_addr;
+  uint8_t index;
+  for (index = 0; index < 4; index++) {
+    long_addr.u8[index] = *data++;
+  }
+  return long_addr.u32;
 }
 
 /**

Marlin/src/HAL/DUE/usb/conf_access.h

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _CONF_ACCESS_H_

Marlin/src/HAL/DUE/usb/conf_clock.h

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef CONF_CLOCK_H_INCLUDED

Marlin/src/HAL/DUE/usb/conf_usb.h

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _CONF_USB_H_
@@ -78,10 +78,6 @@
 //! To define a Full speed device
 //#define USB_DEVICE_FULL_SPEED
 
-#if MB(ARCHIM1)
-  #define USB_DEVICE_FULL_SPEED
-#endif
-
 //! To authorize the High speed
 #ifndef USB_DEVICE_FULL_SPEED
   #if (UC3A3||UC3A4)

Marlin/src/HAL/DUE/usb/ctrl_access.c

@@ -53,7 +53,7 @@
  *
  ******************************************************************************/
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifdef ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/usb/ctrl_access.h

@@ -53,7 +53,7 @@
  *
  ******************************************************************************/
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 

Marlin/src/HAL/DUE/usb/genclk.h

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef CHIP_GENCLK_H_INCLUDED

Marlin/src/HAL/DUE/usb/mrepeat.h

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _MREPEAT_H_

Marlin/src/HAL/DUE/usb/osc.h

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef CHIP_OSC_H_INCLUDED

Marlin/src/HAL/DUE/usb/pll.h

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef CHIP_PLL_H_INCLUDED

Marlin/src/HAL/DUE/usb/preprocessor.h

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _PREPROCESSOR_H_

Marlin/src/HAL/DUE/usb/sbc_protocol.h

@@ -52,7 +52,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 #ifndef _SBC_PROTOCOL_H_
 #define _SBC_PROTOCOL_H_

Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.cpp

@@ -32,7 +32,7 @@ Ctrl_status sd_mmc_spi_test_unit_ready() {
 Ctrl_status sd_mmc_spi_read_capacity(uint32_t *nb_sector) {
   if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isMounted())
     return CTRL_NO_PRESENT;
-  *nb_sector = card.getSd2Card().cardSize() - 1;
+  *nb_sector = card.diskIODriver()->cardSize() - 1;
   return CTRL_GOOD;
 }
 
@@ -68,30 +68,30 @@ Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector) {
   {
     char buffer[80];
     sprintf_P(buffer, PSTR("SDRD: %d @ 0x%08x\n"), nb_sector, addr);
-    PORT_REDIRECT(0);
+    PORT_REDIRECT(SERIAL_PORTMASK(0));
     SERIAL_ECHO(buffer);
   }
   #endif
 
   // Start reading
-  if (!card.getSd2Card().readStart(addr))
+  if (!card.diskIODriver()->readStart(addr))
     return CTRL_FAIL;
 
   // For each specified sector
   while (nb_sector--) {
 
     // Read a sector
-    card.getSd2Card().readData(sector_buf);
+    card.diskIODriver()->readData(sector_buf);
 
     // RAM -> USB
-    if (!udi_msc_trans_block(true, sector_buf, SD_MMC_BLOCK_SIZE, NULL)) {
-      card.getSd2Card().readStop();
+    if (!udi_msc_trans_block(true, sector_buf, SD_MMC_BLOCK_SIZE, nullptr)) {
+      card.diskIODriver()->readStop();
       return CTRL_FAIL;
     }
   }
 
   // Stop reading
-  card.getSd2Card().readStop();
+  card.diskIODriver()->readStop();
 
   // Done
   return CTRL_GOOD;
@@ -108,29 +108,29 @@ Ctrl_status sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector) {
   {
     char buffer[80];
     sprintf_P(buffer, PSTR("SDWR: %d @ 0x%08x\n"), nb_sector, addr);
-    PORT_REDIRECT(0);
+    PORT_REDIRECT(SERIAL_PORTMASK(0));
     SERIAL_ECHO(buffer);
   }
   #endif
 
-  if (!card.getSd2Card().writeStart(addr, nb_sector))
+  if (!card.diskIODriver()->writeStart(addr, nb_sector))
     return CTRL_FAIL;
 
   // For each specified sector
   while (nb_sector--) {
 
     // USB -> RAM
-    if (!udi_msc_trans_block(false, sector_buf, SD_MMC_BLOCK_SIZE, NULL)) {
-      card.getSd2Card().writeStop();
+    if (!udi_msc_trans_block(false, sector_buf, SD_MMC_BLOCK_SIZE, nullptr)) {
+      card.diskIODriver()->writeStop();
       return CTRL_FAIL;
     }
 
     // Write a sector
-    card.getSd2Card().writeData(sector_buf);
+    card.diskIODriver()->writeData(sector_buf);
   }
 
   // Stop writing
-  card.getSd2Card().writeStop();
+  card.diskIODriver()->writeStop();
 
   // Done
   return CTRL_GOOD;

Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.h

@@ -42,7 +42,7 @@
  *
  ******************************************************************************/
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 
@@ -74,7 +74,7 @@
 #define   SD_MMC_REMOVING      2
 
 
-//---- CONTROL FONCTIONS ----
+//---- CONTROL FUNCTIONS ----
 //!
 //! @brief This function initializes the hw/sw resources required to drive the SD_MMC_SPI.
 //!/
@@ -134,7 +134,7 @@ extern bool           sd_mmc_spi_wr_protect(void);
 extern bool           sd_mmc_spi_removal(void);
 
 
-//---- ACCESS DATA FONCTIONS ----
+//---- ACCESS DATA FUNCTIONS ----
 
 #if ACCESS_USB == true
 // Standard functions for open in read/write mode the device

Marlin/src/HAL/DUE/usb/spc_protocol.h

@@ -45,7 +45,7 @@
  */
 
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 #ifndef _SPC_PROTOCOL_H_
 #define _SPC_PROTOCOL_H_

Marlin/src/HAL/DUE/usb/stringz.h

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _STRINGZ_H_

Marlin/src/HAL/DUE/usb/sysclk.c

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifdef ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/usb/sysclk.h

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef CHIP_SYSCLK_H_INCLUDED

Marlin/src/HAL/DUE/usb/tpaste.h

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifndef _TPASTE_H_

Marlin/src/HAL/DUE/usb/udc.c

@@ -41,7 +41,7 @@
  *
  */
 /*
- * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
 #ifdef ARDUINO_ARCH_SAM