Update builddate and Version

make custom Anycubic touchscreen implementation an ExtUI module

Marlin/src/MarlinCore.cpp

@@ -254,7 +254,7 @@
 
 // PATCH START: Knutwurst
 #if ENABLED(ANYCUBIC_TOUCHSCREEN)
-  #include "lcd/anycubic_touchscreen.h"
+  #include "lcd/extui/knutwurst/anycubic_touchscreen.h"
 #endif
 // PATCH END: Knutwurst
 
@@ -353,7 +353,7 @@ void startOrResumeJob() {
     TERN_(GCODE_REPEAT_MARKERS, repeat.reset());
     TERN_(CANCEL_OBJECTS, cancelable.reset());
     TERN_(LCD_SHOW_E_TOTAL, e_move_accumulator = 0);
-    #if ENABLED(SET_REMAINING_TIME)
+    #if BOTH(LCD_SET_PROGRESS_MANUALLY, USE_M73_REMAINING_TIME)
       ui.reset_remaining_time();
     #endif
   }
@@ -890,10 +890,6 @@ void idle(bool no_stepper_sleep/*=false*/) {
   TERN_(MAX7219_DEBUG, max7219.idle_tasks());
 
   // PATCH START: Knutwurst
-  #ifdef ANYCUBIC_TOUCHSCREEN
-    AnycubicTouchscreen.CommandScan();
-  #endif
-
   #ifdef ENDSTOP_BEEP
     EndstopBeep();
   #endif
@@ -1011,12 +1007,6 @@ void kill(FSTR_P const lcd_error/*=nullptr*/, FSTR_P const lcd_component/*=nullp
   // "Error:Printer halted. kill() called!"
   SERIAL_ERROR_MSG(STR_ERR_KILLED);
 
-  // PATCH START: Knutwurst
-  #ifdef ANYCUBIC_TOUCHSCREEN
-    AnycubicTouchscreen.KillTFT();
-  #endif
-  // PATCH END: Knutwurst
-
   #ifdef ACTION_ON_KILL
     hostui.kill();
   #endif
@@ -1292,12 +1282,6 @@ void setup() {
   #endif
   SERIAL_ECHOLNPGM("start");
 
-  // PATCH START: Knutwurst
-  #ifdef ANYCUBIC_TOUCHSCREEN
-    AnycubicTouchscreen.Setup();
-  #endif
-  // PATCH END: Knutwurst
-
   // Set up these pins early to prevent suicide
   #if HAS_KILL
     SETUP_LOG("KILL_PIN");
@@ -1796,13 +1780,6 @@ void loop() {
 
     endstops.event_handler();
 
-    // PATCH START: Knutwurst
-    idle();
-    #ifdef ANYCUBIC_TOUCHSCREEN
-      AnycubicTouchscreen.CommandScan();
-    #endif
-    // PATCH END: Knutwurst
-
     TERN_(HAS_TFT_LVGL_UI, printer_state_polling());
 
     TERN_(MARLIN_TEST_BUILD, runPeriodicTests());

Marlin/src/gcode/anycubic_tft_debug/M9999.cpp

@@ -24,7 +24,7 @@
 
 #if BOTH(ANYCUBIC_TFT_DEBUG, KNUTWURST_DGUS2_TFT)
 
-#include "../../lcd/anycubic_touchscreen.h"
+#include "../../lcd/extui/knutwurst/anycubic_touchscreen.h"
 #include "../gcode.h"
 
 void GcodeSuite::M9999() {
@@ -38,4 +38,4 @@ void GcodeSuite::M9999() {
 }
 
 #endif
-// PATCH END: KNUTWURST
+// PATCH END: KNUTWURST

Marlin/src/gcode/bedlevel/abl/G29.cpp

@@ -806,11 +806,6 @@ G29_TYPE GcodeSuite::G29() {
         bedlevel.set_grid(abl.gridSpacing, abl.probe_position_lf);
         COPY(bedlevel.z_values, abl.z_values);
         TERN_(IS_KINEMATIC, bedlevel.extrapolate_unprobed_bed_level());
-
-        #if ENABLED(KNUTWURST_TFT_LEVELING)
-          LCD_SERIAL.print("J25\r\n"); // Autoleveling done!
-        #endif
-
         bedlevel.refresh_bed_level();
 
         bedlevel.print_leveling_grid();

Marlin/src/gcode/control/M80_M81.cpp

@@ -31,7 +31,7 @@
 
 // PATCH START: Knutwurst
 #if ENABLED(ANYCUBIC_TOUCHSCREEN)
-  #include "../../lcd/anycubic_touchscreen.h"
+  #include "../../lcd/extui/knutwurst/anycubic_touchscreen.h"
 #endif
 // PATCH END: Knutwurst
 

Marlin/src/gcode/feature/pause/M600.cpp

@@ -32,7 +32,7 @@
 
 // PATCH START: Knutwurst
 #ifdef ANYCUBIC_TOUCHSCREEN
-  #include "../../../lcd/anycubic_touchscreen.h"
+  #include "../../../lcd/extui/knutwurst/anycubic_touchscreen.h"
   #include "../../../sd/cardreader.h"
 #endif
 // PATCH END: Knutwurst

Marlin/src/gcode/temp/M104_M109.cpp

@@ -39,7 +39,7 @@
 #include "../../MarlinCore.h" // for startOrResumeJob, etc.
 
 #ifdef ANYCUBIC_TOUCHSCREEN
-  #include "../../lcd/anycubic_touchscreen.h"
+  #include "../../lcd/extui/knutwurst/anycubic_touchscreen.h"
 #endif
 
 #if ENABLED(PRINTJOB_TIMER_AUTOSTART)

Marlin/src/inc/Conditionals_LCD.h

@@ -471,7 +471,7 @@
 #endif
 
 // Extensible UI serial touch screens. (See src/lcd/extui)
-#if ANY(HAS_DGUS_LCD, MALYAN_LCD, TOUCH_UI_FTDI_EVE, ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON, NEXTION_TFT)
+#if ANY(HAS_DGUS_LCD, MALYAN_LCD, TOUCH_UI_FTDI_EVE, ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON, ANYCUBIC_TOUCHSCREEN, NEXTION_TFT) // PATCH: knutwurst
   #define IS_EXTUI 1
   #define EXTENSIBLE_UI
 #endif

Marlin/src/inc/Version.h

@@ -41,10 +41,10 @@
  * here we define this default string as the date where the latest release
  * version was tagged.
  */
- #define CUSTOM_BUILD_VERSION "1.5.0-b2"
+ #define CUSTOM_BUILD_VERSION "1.5.0-b3"
 
 #ifndef STRING_DISTRIBUTION_DATE
-  #define STRING_DISTRIBUTION_DATE "2022-12-21"
+  #define STRING_DISTRIBUTION_DATE "2023-01-03"
 #endif
 
 /**

Marlin/src/lcd/extui/knutwurst/anycubic_touchscreen.cpp

@@ -24,21 +24,21 @@
 #include <stdlib.h>
 #include <string.h>
 
-#include "../gcode/queue.h"
-#include "../gcode/parser.h"
-#include "../feature/e_parser.h"
-#include "../feature/pause.h"
-#include "../feature/bedlevel/bedlevel.h"
-#include "../libs/buzzer.h"
-#include "../libs/numtostr.h"
-#include "../module/planner.h"
-#include "../module/printcounter.h"
-#include "../module/temperature.h"
-#include "../module/motion.h"
-#include "../module/probe.h"
-#include "../module/settings.h"
-#include "../module/stepper.h"
-#include "../sd/cardreader.h"
+#include "../../../gcode/queue.h"
+#include "../../../gcode/parser.h"
+#include "../../../feature/e_parser.h"
+#include "../../../feature/pause.h"
+#include "../../../feature/bedlevel/bedlevel.h"
+#include "../../../libs/buzzer.h"
+#include "../../../libs/numtostr.h"
+#include "../../../module/planner.h"
+#include "../../../module/printcounter.h"
+#include "../../../module/temperature.h"
+#include "../../../module/motion.h"
+#include "../../../module/probe.h"
+#include "../../../module/settings.h"
+#include "../../../module/stepper.h"
+#include "../../../sd/cardreader.h"
 
 #ifdef ANYCUBIC_TOUCHSCREEN
   #include "./anycubic_touchscreen.h"
@@ -1267,6 +1267,20 @@
     #endif
   }
 
+  void AnycubicTouchscreenClass::SDCardStateChange(bool isInserted) {
+    #if ENABLED(ANYCUBIC_TFT_DEBUG)
+      SERIAL_ECHOLNPGM("TFT Serial Debug: SDCardStateChange event triggered...", isInserted);
+    #endif
+    CheckSDCardChange();
+  }
+
+  void AnycubicTouchscreenClass::SDCardError() {
+    #if ENABLED(ANYCUBIC_TFT_DEBUG)
+      SERIAL_ECHOLNPGM("TFT Serial Debug: SDCardError event triggered...");
+    #endif
+    SENDLINE_DBG_PGM("J21", "TFT Serial Debug: SD Card Error ... J21");
+  }
+
   void AnycubicTouchscreenClass::CheckHeaterError() {
     if ((thermalManager.degHotend(0) < 5) || (thermalManager.degHotend(0) > 300)) {
       if (HeaterCheckCount > 600000) {
@@ -1443,6 +1457,9 @@
     }
   }
 
+  void AnycubicTouchscreenClass::UserConfirmRequired(const char * const msg) {
+      // TODO: implement to make advanced pause, filament change, etc. work again
+  }
 
   static boolean TFTcomment_mode = false;
 
@@ -2316,5 +2333,11 @@
     #endif
   }
 
+  #if ENABLED(KNUTWURST_TFT_LEVELING)
+    void AnycubicTouchscreenClass::LevelingDone() {
+      SENDLINE_DBG_PGM("J25", "TFT Serial Debug: Auto leveling done... J25");
+    }
+  #endif
+
   AnycubicTouchscreenClass AnycubicTouchscreen;
 #endif // ifdef ANYCUBIC_TOUCHSCREEN

Marlin/src/lcd/extui/knutwurst/anycubic_touchscreen.h

@@ -25,9 +25,8 @@
 // #include "../inc/MarlinConfig.h"
 // #include "../module/configuration_store.h"
 
-#include "./src/inc/MarlinConfigPre.h"
-#include "./src/feature/bedlevel/bedlevel.h"
-#include "src/module/probe.h"
+#include "../../../inc/MarlinConfigPre.h"
+#include "../../../module/probe.h"
 
 
 enum axis_t     : uint8_t { X, Y, Z, X2, Y2, Z2, Z3, Z4 };
@@ -253,10 +252,16 @@ void BedHeatingDone();
 void HeatingDone();
 void HeatingStart();
 void FilamentRunout();
+void UserConfirmRequired(const char *);
+void SDCardStateChange(bool);
+void SDCardError();
 void KillTFT();
 #if BOTH(ANYCUBIC_TFT_DEBUG, KNUTWURST_DGUS2_TFT)
   void Command(const char * const command);
 #endif
+#if ENABLED(KNUTWURST_TFT_LEVELING)
+  void LevelingDone();
+#endif
 char TFTstate = ANYCUBIC_TFT_STATE_IDLE;
 
 /**

Marlin/src/lcd/extui/knutwurst/knutwurst_extui.cpp

@@ -0,0 +1,127 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * lcd/extui/knutwurst/knutwurst_extui.cpp
+ */
+
+#include "../../../inc/MarlinConfigPre.h"
+
+#if ENABLED(ANYCUBIC_TOUCHSCREEN)
+
+#include "anycubic_touchscreen.h"
+#include "../ui_api.h"
+
+#include <Arduino.h>    // for the ::tone() call
+
+namespace ExtUI {
+  void onStartup()        { AnycubicTouchscreen.Setup(); }
+  void onIdle()           { AnycubicTouchscreen.CommandScan(); }
+  void onPrinterKilled(FSTR_P const error, FSTR_P const component) { AnycubicTouchscreen.KillTFT(); }
+  void onMediaInserted()  { AnycubicTouchscreen.SDCardStateChange(true); }
+  void onMediaError()     { AnycubicTouchscreen.SDCardError(); }
+  void onMediaRemoved()   { AnycubicTouchscreen.SDCardStateChange(false); }
+  void onPlayTone(const uint16_t frequency, const uint16_t duration) {
+    TERN_(SPEAKER, ::tone(BEEPER_PIN, frequency, duration));
+  }
+  void onPrintTimerStarted()  { }
+  void onPrintTimerPaused()   { }
+  void onPrintTimerStopped()  { }
+  void onFilamentRunout(const extruder_t extruder)   { AnycubicTouchscreen.FilamentRunout(); }
+  void onUserConfirmRequired(const char * const msg) { AnycubicTouchscreen.UserConfirmRequired(msg); }
+  void onStatusChanged(const char * const msg) {}
+
+  void onHomingStart() {}
+  void onHomingDone() {}
+  void onPrintDone() {}
+
+  void onFactoryReset() {}
+
+  void onStoreSettings(char *buff) {
+    // Called when saving to EEPROM (i.e. M500). If the ExtUI needs
+    // permanent data to be stored, it can write up to eeprom_data_size bytes
+    // into buff.
+
+    // Example:
+    //  static_assert(sizeof(myDataStruct) <= eeprom_data_size);
+    //  memcpy(buff, &myDataStruct, sizeof(myDataStruct));
+  }
+
+  void onLoadSettings(const char *buff) {
+    // Called while loading settings from EEPROM. If the ExtUI
+    // needs to retrieve data, it should copy up to eeprom_data_size bytes
+    // from buff
+
+    // Example:
+    //  static_assert(sizeof(myDataStruct) <= eeprom_data_size);
+    //  memcpy(&myDataStruct, buff, sizeof(myDataStruct));
+  }
+
+  void onPostprocessSettings() {
+    // Called after loading or resetting stored settings
+  }
+
+  void onSettingsStored(bool success) {
+    // Called after the entire EEPROM has been written,
+    // whether successful or not.
+  }
+
+  void onSettingsLoaded(bool success) {
+    // Called after the entire EEPROM has been read,
+    // whether successful or not.
+  }
+
+  #if HAS_MESH
+    void onLevelingStart() {}
+
+    void onLevelingDone() {
+      #if ENABLED(KNUTWURST_TFT_LEVELING)
+        AnycubicTouchscreen.LevelingDone();
+      #endif
+    }
+
+    void onMeshUpdate(const int8_t xpos, const int8_t ypos, const_float_t zval) {
+      // Called when any mesh points are updated
+    }
+
+    void onMeshUpdate(const int8_t xpos, const int8_t ypos, probe_state_t state) {
+      // Called when any mesh points are updated
+    }
+  #endif
+
+  #if ENABLED(POWER_LOSS_RECOVERY)
+    void onPowerLossResume() {
+      // Called on resume from power-loss
+    }
+  #endif
+
+  #if HAS_PID_HEATING
+    void onPidTuning(const result_t rst) {
+      // Called for temperature PID tuning result
+    }
+  #endif
+
+  void onSteppersDisabled() {}
+  void onSteppersEnabled()  {}
+}
+
+#endif // ANYCUBIC_TOUCHSCREEN