Marlin-2-0-x-Anycubic-i3-MEGA-S

wp/Marlin-2-0-x-Anycubic-i3-MEGA-S

Fork 0

RSS Feed

1.1.7 206ea2545c

Compare
1.1.7 Stable

knutwurst released this 2020-11-29 05:55:25 -06:00 | 518 commits to master since this release
New Features:
- Easy 4 point leveling assistant
- New Jerk Control instead of fixed Junction Deviation factor to save CPU cycles
- G2 and G3 Gcode Arc or Circle Move Support for Laser implementation
- Buzzer Sound when PID Tuning hast finished
- Support for "cheap" TMC2208 Steppers
- Support for BMG Extruder also for MEGA X
- Increase maximum nozzle temperature to 300°C
- Increase maximum bed temperature to 150°C
Bugfixes:
- Stuttering when printing large curved objects
- Stuttering via USB/Octoprint
- Random resets on Mega S (DGUS) and Mega P
- Unexpected axis movement
- Default Jerk Settings for MEGA/S/P
- Less aggressive thermal runaway protection
- SlowDown didn't work
- Wait-Cycle when doing a direction change to minimize possible layer shifts
- Mega Pro Extruder direction was inverted
- Slow Axis movements when using the Laser to engrave small circles
- Special Menu was not visible without SD card
How to Install:
1. Select your preferred version listed here
2. Read the FAQ which can be found in the Wiki
3. If you own a Mega/Mega S or Mega P, set your Bed size in your Slicer to these values
4. Use Cura or xLoader to flash the Firmware to your Printer.
Important: Be sure to select "LOAD FW DEFAULTS" and "SAVE EEPROM" via Special Menu after updating to get rid of old configuration settings!
Downloads
- Source Code (ZIP)
- Source Code (TAR.GZ)
- MEGA_1G_BLT_10_v1.1.7.hex
  389 KiB
  2020-11-29 06:19:31 -06:00
- MEGA_1G_BLT_11_v1.1.7.hex
  389 KiB
  2020-11-29 06:19:33 -06:00
- MEGA_1G_TMC_BLT_10_v1.1.7.hex
  389 KiB
  2020-11-29 06:19:34 -06:00
- MEGA_1G_TMC_BLT_11_v1.1.7.hex
  389 KiB
  2020-11-29 06:19:35 -06:00
- MEGA_1G_TMC_v1.1.7.hex
  358 KiB
  2020-11-29 06:19:36 -06:00
- MEGA_1G_v1.1.7.hex
  357 KiB
  2020-11-29 06:19:37 -06:00
- MEGA_BLT_10_v1.1.7.hex
  392 KiB
  2020-11-29 06:19:38 -06:00
- MEGA_BLT_11_v1.1.7.hex
  392 KiB
  2020-11-29 06:19:40 -06:00
- MEGA_P_BLT_10_v1.1.7.hex
  395 KiB
  2020-11-29 06:19:41 -06:00
- MEGA_P_BLT_11_v1.1.7.hex
  395 KiB
  2020-11-29 06:19:42 -06:00
- MEGA_P_TMC_BLT_10_v1.1.7.hex
  395 KiB
  2020-11-29 06:19:43 -06:00
- MEGA_P_TMC_BLT_11_v1.1.7.hex
  395 KiB
  2020-11-29 06:19:44 -06:00
- MEGA_P_TMC_v1.1.7.hex
  364 KiB
  2020-11-29 06:19:45 -06:00
- MEGA_P_v1.1.7.hex
  364 KiB
  2020-11-29 06:19:47 -06:00
- MEGA_S_BLT_10_v1.1.7.hex
  392 KiB
  2020-11-29 06:19:48 -06:00
- MEGA_S_BLT_11_v1.1.7.hex
  392 KiB
  2020-11-29 06:19:49 -06:00
- MEGA_S_DGUS_BLT_10_v1.1.7.hex
  395 KiB
  2020-11-29 06:19:50 -06:00
- MEGA_S_DGUS_BLT_11_v1.1.7.hex
  395 KiB
  2020-11-29 06:19:52 -06:00
- MEGA_S_DGUS_TMC_BLT_10_v1.1.7.hex
  395 KiB
  2020-11-29 06:19:53 -06:00
- MEGA_S_DGUS_TMC_BLT_11_v1.1.7.hex
  395 KiB
  2020-11-29 06:19:54 -06:00
- MEGA_S_DGUS_TMC_v1.1.7.hex
  364 KiB
  2020-11-29 06:19:55 -06:00
- MEGA_S_DGUS_v1.1.7.hex
  364 KiB
  2020-11-29 06:19:56 -06:00
- MEGA_S_TMC_BLT_10_v1.1.7.hex
  392 KiB
  2020-11-29 06:19:58 -06:00
- MEGA_S_TMC_BLT_11_v1.1.7.hex
  392 KiB
  2020-11-29 06:19:59 -06:00
- MEGA_S_TMC_v1.1.7.hex
  360 KiB
  2020-11-29 06:20:00 -06:00
- MEGA_S_v1.1.7.hex
  360 KiB
  2020-11-29 06:20:01 -06:00
- MEGA_TMC_BLT_10_v1.1.7.hex
  392 KiB
  2020-11-29 06:20:02 -06:00
- MEGA_TMC_BLT_11_v1.1.7.hex
  392 KiB
  2020-11-29 06:20:04 -06:00
- MEGA_TMC_v1.1.7.hex
  360 KiB
  2020-11-29 06:20:05 -06:00
- MEGA_X_BLT_10_v1.1.7.hex
  392 KiB
  2020-11-29 06:20:07 -06:00
- MEGA_X_BLT_11_v1.1.7.hex
  392 KiB
  2020-11-29 06:20:09 -06:00
- MEGA_X_TMC_BLT_10_v1.1.7.hex
  392 KiB
  2020-11-29 06:20:10 -06:00
- MEGA_X_TMC_BLT_11_v1.1.7.hex
  392 KiB
  2020-11-29 06:20:11 -06:00
- MEGA_X_TMC_v1.1.7.hex
  360 KiB
  2020-11-29 06:20:12 -06:00
- MEGA_X_v1.1.7.hex
  360 KiB
  2020-11-29 06:20:14 -06:00
- MEGA_v1.1.7.hex
  360 KiB
  2020-11-29 06:20:06 -06:00

30 Releases 37 Tags

1.1.7 Stable