Marlin-2-0-x-Anycubic-i3-MEGA-S

wp/Marlin-2-0-x-Anycubic-i3-MEGA-S

Fork 0

RSS Feed

1.1.8 53cdbaec58

Compare
1.1.8 Stable

knutwurst released this 2021-01-01 08:11:43 -06:00 | 514 commits to master since this release
Features:
- Babystepping is now usable without BLTouch
Bugfixes:
- Special Menu was not visible without SD card
- ARC Settings are default for now to ensure the best compatibility with laser engraving
- Stepper direction change delay increased from 650 to 200 to eliminate Extruder bugs with TMC drivers
How to Install:
1. Select your preferred version listed here
2. Read the FAQ which can be found in the Wiki
3. If you own a Mega/Mega S or Mega P, set your Bed size in your Slicer to these values
4. Use Cura or xLoader to flash the Firmware to your Printer.
Important: Be sure to select "LOAD FW DEFAULTS" and "SAVE EEPROM" via Special Menu after updating to get rid of old configuration settings!
Downloads
- Source Code (ZIP)
- Source Code (TAR.GZ)
- MEGA_1G_BLT_10_v1.1.8.hex
  390 KiB
  2021-01-01 09:02:31 -06:00
- MEGA_1G_BLT_11_v1.1.8.hex
  390 KiB
  2021-01-01 09:02:37 -06:00
- MEGA_1G_TMC_BLT_10_v1.1.8.hex
  390 KiB
  2021-01-01 09:02:38 -06:00
- MEGA_1G_TMC_BLT_11_v1.1.8.hex
  390 KiB
  2021-01-01 09:02:39 -06:00
- MEGA_1G_TMC_v1.1.8.hex
  359 KiB
  2021-01-01 09:02:40 -06:00
- MEGA_1G_v1.1.8.hex
  359 KiB
  2021-01-01 09:02:41 -06:00
- MEGA_BLT_10_v1.1.8.hex
  392 KiB
  2021-01-01 09:02:42 -06:00
- MEGA_BLT_11_v1.1.8.hex
  392 KiB
  2021-01-01 09:02:43 -06:00
- MEGA_P_BLT_10_v1.1.8.hex
  396 KiB
  2021-01-01 09:02:44 -06:00
- MEGA_P_BLT_11_v1.1.8.hex
  396 KiB
  2021-01-01 09:02:45 -06:00
- MEGA_P_TMC_BLT_10_v1.1.8.hex
  396 KiB
  2021-01-01 09:02:45 -06:00
- MEGA_P_TMC_BLT_11_v1.1.8.hex
  396 KiB
  2021-01-01 09:02:46 -06:00
- MEGA_P_TMC_v1.1.8.hex
  366 KiB
  2021-01-01 09:02:47 -06:00
- MEGA_P_v1.1.8.hex
  366 KiB
  2021-01-01 09:02:48 -06:00
- MEGA_S_BLT_10_v1.1.8.hex
  392 KiB
  2021-01-01 09:02:48 -06:00
- MEGA_S_BLT_11_v1.1.8.hex
  392 KiB
  2021-01-01 09:02:49 -06:00
- MEGA_S_DGUS_BLT_10_v1.1.8.hex
  396 KiB
  2021-01-01 09:02:50 -06:00
- MEGA_S_DGUS_BLT_11_v1.1.8.hex
  396 KiB
  2021-01-01 09:02:50 -06:00
- MEGA_S_DGUS_TMC_BLT_10_v1.1.8.hex
  396 KiB
  2021-01-01 09:02:51 -06:00
- MEGA_S_DGUS_TMC_BLT_11_v1.1.8.hex
  396 KiB
  2021-01-01 09:02:52 -06:00
- MEGA_S_DGUS_TMC_v1.1.8.hex
  366 KiB
  2021-01-01 09:02:53 -06:00
- MEGA_S_DGUS_v1.1.8.hex
  366 KiB
  2021-01-01 09:02:53 -06:00
- MEGA_S_TMC_BLT_10_v1.1.8.hex
  392 KiB
  2021-01-01 09:02:54 -06:00
- MEGA_S_TMC_BLT_11_v1.1.8.hex
  392 KiB
  2021-01-01 09:02:55 -06:00
- MEGA_S_TMC_v1.1.8.hex
  363 KiB
  2021-01-01 09:02:55 -06:00
- MEGA_S_v1.1.8.hex
  363 KiB
  2021-01-01 09:02:56 -06:00
- MEGA_TMC_BLT_10_v1.1.8.hex
  392 KiB
  2021-01-01 09:02:57 -06:00
- MEGA_TMC_BLT_11_v1.1.8.hex
  392 KiB
  2021-01-01 09:02:57 -06:00
- MEGA_TMC_v1.1.8.hex
  363 KiB
  2021-01-01 09:02:58 -06:00
- MEGA_X_BLT_10_v1.1.8.hex
  392 KiB
  2021-01-01 09:03:00 -06:00
- MEGA_X_BLT_11_v1.1.8.hex
  392 KiB
  2021-01-01 09:03:00 -06:00
- MEGA_X_TMC_BLT_10_v1.1.8.hex
  392 KiB
  2021-01-01 09:03:01 -06:00
- MEGA_X_TMC_BLT_11_v1.1.8.hex
  392 KiB
  2021-01-01 09:03:02 -06:00
- MEGA_X_TMC_v1.1.8.hex
  363 KiB
  2021-01-01 09:03:02 -06:00
- MEGA_X_v1.1.8.hex
  363 KiB
  2021-01-01 09:03:03 -06:00
- MEGA_v1.1.8.hex
  363 KiB
  2021-01-01 09:02:59 -06:00

30 Releases 37 Tags

1.1.8 Stable