Marlin-2-0-x-Anycubic-i3-MEGA-S

wp/Marlin-2-0-x-Anycubic-i3-MEGA-S

Fork 0

RSS Feed

1.1.9 5d1444295b

Compare
1.1.9 Stable

knutwurst released this 2021-01-13 08:36:03 -06:00 | 509 commits to master since this release
*Don't get confused with the version number! This is NOT "Marlin 1.1.9". It's "Knutwurst's Mega 1.1.9" based on Marlin 2.0.x!

Features:
- None. Just bugfixing, but getting codebase ready for Mega Pro Laser and Chiron Support
Bugfixes:
- In some environments, the extruder or an axis suddenly stopped working or turned backwards
- The printer stopped working in a cold environment (< 10°C)
How to Install:
1. Select your preferred version listed here
2. Read the FAQ which can be found in the Wiki
3. If you own a Mega/Mega S or Mega P, set your Bed size in your Slicer to these values
4. Use Cura or xLoader to flash the Firmware to your Printer.
Important: Be sure to select "LOAD FW DEFAULTS" and "SAVE EEPROM" via Special Menu after updating from KW-1.1.6 or lower to get rid of old configuration settings!
Downloads
- Source Code (ZIP)
- Source Code (TAR.GZ)
- MEGA_1G_BLT_10_v1.1.9.hex
  390 KiB
  2021-01-13 09:14:55 -06:00
- MEGA_1G_BLT_11_v1.1.9.hex
  390 KiB
  2021-01-13 09:14:57 -06:00
- MEGA_1G_TMC_BLT_10_v1.1.9.hex
  390 KiB
  2021-01-13 09:14:57 -06:00
- MEGA_1G_TMC_BLT_11_v1.1.9.hex
  390 KiB
  2021-01-13 09:14:58 -06:00
- MEGA_1G_TMC_v1.1.9.hex
  359 KiB
  2021-01-13 09:14:59 -06:00
- MEGA_1G_v1.1.9.hex
  359 KiB
  2021-01-13 09:15:00 -06:00
- MEGA_BLT_10_v1.1.9.hex
  392 KiB
  2021-01-13 09:15:00 -06:00
- MEGA_BLT_11_v1.1.9.hex
  392 KiB
  2021-01-13 09:15:01 -06:00
- MEGA_P_BLT_10_v1.1.9.hex
  395 KiB
  2021-01-13 09:15:01 -06:00
- MEGA_P_BLT_11_v1.1.9.hex
  395 KiB
  2021-01-13 09:15:02 -06:00
- MEGA_P_TMC_BLT_10_v1.1.9.hex
  395 KiB
  2021-01-13 09:15:03 -06:00
- MEGA_P_TMC_BLT_11_v1.1.9.hex
  395 KiB
  2021-01-13 09:15:03 -06:00
- MEGA_P_TMC_v1.1.9.hex
  366 KiB
  2021-01-13 09:15:04 -06:00
- MEGA_P_v1.1.9.hex
  366 KiB
  2021-01-13 09:15:05 -06:00
- MEGA_S_BLT_10_v1.1.9.hex
  392 KiB
  2021-01-13 09:15:06 -06:00
- MEGA_S_BLT_11_v1.1.9.hex
  392 KiB
  2021-01-13 09:15:06 -06:00
- MEGA_S_DGUS_BLT_10_v1.1.9.hex
  395 KiB
  2021-01-13 09:15:07 -06:00
- MEGA_S_DGUS_BLT_11_v1.1.9.hex
  395 KiB
  2021-01-13 09:15:08 -06:00
- MEGA_S_DGUS_TMC_BLT_10_v1.1.9.hex
  395 KiB
  2021-01-13 09:15:09 -06:00
- MEGA_S_DGUS_TMC_BLT_11_v1.1.9.hex
  395 KiB
  2021-01-13 09:15:10 -06:00
- MEGA_S_DGUS_TMC_v1.1.9.hex
  366 KiB
  2021-01-13 09:15:10 -06:00
- MEGA_S_DGUS_v1.1.9.hex
  366 KiB
  2021-01-13 09:15:11 -06:00
- MEGA_S_TMC_BLT_10_v1.1.9.hex
  392 KiB
  2021-01-13 09:15:12 -06:00
- MEGA_S_TMC_BLT_11_v1.1.9.hex
  392 KiB
  2021-01-13 09:15:13 -06:00
- MEGA_S_TMC_v1.1.9.hex
  363 KiB
  2021-01-13 09:15:13 -06:00
- MEGA_S_v1.1.9.hex
  363 KiB
  2021-01-13 09:15:14 -06:00
- MEGA_TMC_BLT_10_v1.1.9.hex
  392 KiB
  2021-01-13 09:15:15 -06:00
- MEGA_TMC_BLT_11_v1.1.9.hex
  392 KiB
  2021-01-13 09:15:16 -06:00
- MEGA_TMC_v1.1.9.hex
  363 KiB
  2021-01-13 09:15:16 -06:00
- MEGA_X_BLT_10_v1.1.9.hex
  392 KiB
  2021-01-13 09:15:18 -06:00
- MEGA_X_BLT_11_v1.1.9.hex
  392 KiB
  2021-01-13 09:15:18 -06:00
- MEGA_X_TMC_BLT_10_v1.1.9.hex
  392 KiB
  2021-01-13 09:15:19 -06:00
- MEGA_X_TMC_BLT_11_v1.1.9.hex
  392 KiB
  2021-01-13 09:15:20 -06:00
- MEGA_X_TMC_v1.1.9.hex
  363 KiB
  2021-01-13 09:15:20 -06:00
- MEGA_X_v1.1.9.hex
  363 KiB
  2021-01-13 09:15:21 -06:00
- MEGA_v1.1.9.hex
  363 KiB
  2021-01-13 09:15:17 -06:00

30 Releases 37 Tags

1.1.9 Stable