Marlin-2-0-x-Anycubic-i3-MEGA-S

wp/Marlin-2-0-x-Anycubic-i3-MEGA-S

Fork 0

RSS Feed

1.3.1 21d062c285

Compare
1.3.1 Stable

knutwurst released this 2021-09-23 11:37:47 -05:00 | 345 commits to master since this release
Features:
- Same new Features like in Version 1.3.0 but with disabled Wifi functionality. It can be easily enabled by uncommenting #define SERIAL_PORT_2 in Configuration.h file.
Bugfixes:
- Some users reported USB communication issues when using Octoprint in combination with a USB Webcam. By disabling the Wifi functionality, this issue could be fixed so far.
Known Issues:
- The Mega Pro Laser is currently nor supported at all.
- When setting the Z offset manually, the Nozzle does not move to give you "live feedback". The Offset is only applied after X/Y movement.
- The Nozzle temperature can only be set over 260°C via gcode and not the Touchscreen. This issue can not be fixed.
- On Mega X with original DWIN/DGUS II Display, the pause/resume/filament change feature does not work due to a bug in the TFT Firmware itself.
- The gcode filetransfer via Wifi is pretty slow due to to hardware limitations.
- In some cases, Octoprint loses the USB connection. If this happens, just disable the internal Wifi feature.
How to Install:
1. Follow the Beginner's Guide which is also available in german as "Einsteiger Leitfaden".
2. Read the FAQ which can also be found in the Wiki.
3. If you own a MEGA S or MEGA PRO, set your Bed size in your Slicer to these values.
4. Use Cura, PrusaSlicer or xLoader to flash the Firmware to your Printer.
Important: Be sure to select "LOAD FW DEFAULTS" and "SAVE EEPROM" via Special Menu after updating!
Downloads
- Source Code (ZIP)
- Source Code (TAR.GZ)
- CHIRON_DGUS_TMC_v1.3.1.hex
  396 KiB
  2021-09-23 11:35:28 -05:00
- CHIRON_DGUS_v1.3.1.hex
  396 KiB
  2021-09-23 11:35:31 -05:00
- CHIRON_TMC_v1.3.1.hex
  394 KiB
  2021-09-23 11:35:32 -05:00
- CHIRON_v1.3.1.hex
  394 KiB
  2021-09-23 11:35:35 -05:00
- MEGA_1G_BLT_10_v1.3.1.hex
  394 KiB
  2021-09-23 11:35:36 -05:00
- MEGA_1G_BLT_11_v1.3.1.hex
  394 KiB
  2021-09-23 11:35:37 -05:00
- MEGA_1G_TMC_BLT_10_v1.3.1.hex
  394 KiB
  2021-09-23 11:35:38 -05:00
- MEGA_1G_TMC_BLT_11_v1.3.1.hex
  394 KiB
  2021-09-23 11:35:39 -05:00
- MEGA_1G_TMC_v1.3.1.hex
  361 KiB
  2021-09-23 11:35:41 -05:00
- MEGA_1G_v1.3.1.hex
  361 KiB
  2021-09-23 11:35:42 -05:00
- MEGA_BLT_10_v1.3.1.hex
  397 KiB
  2021-09-23 11:35:43 -05:00
- MEGA_BLT_11_v1.3.1.hex
  397 KiB
  2021-09-23 11:35:45 -05:00
- MEGA_P_BLT_10_v1.3.1.hex
  400 KiB
  2021-09-23 11:35:46 -05:00
- MEGA_P_BLT_11_v1.3.1.hex
  400 KiB
  2021-09-23 11:35:47 -05:00
- MEGA_P_TMC_BLT_10_v1.3.1.hex
  399 KiB
  2021-09-23 11:35:48 -05:00
- MEGA_P_TMC_BLT_11_v1.3.1.hex
  399 KiB
  2021-09-23 11:35:49 -05:00
- MEGA_P_TMC_v1.3.1.hex
  367 KiB
  2021-09-23 11:35:50 -05:00
- MEGA_P_v1.3.1.hex
  368 KiB
  2021-09-23 11:35:51 -05:00
- MEGA_S_BLT_10_v1.3.1.hex
  397 KiB
  2021-09-23 11:35:52 -05:00
- MEGA_S_BLT_11_v1.3.1.hex
  397 KiB
  2021-09-23 11:35:53 -05:00
- MEGA_S_DGUS_BLT_10_v1.3.1.hex
  400 KiB
  2021-09-23 11:35:54 -05:00
- MEGA_S_DGUS_BLT_11_v1.3.1.hex
  400 KiB
  2021-09-23 11:35:55 -05:00
- MEGA_S_DGUS_TMC_BLT_10_v1.3.1.hex
  399 KiB
  2021-09-23 11:35:55 -05:00
- MEGA_S_DGUS_TMC_BLT_11_v1.3.1.hex
  399 KiB
  2021-09-23 11:35:56 -05:00
- MEGA_S_DGUS_TMC_v1.3.1.hex
  367 KiB
  2021-09-23 11:35:57 -05:00
- MEGA_S_DGUS_v1.3.1.hex
  368 KiB
  2021-09-23 11:35:58 -05:00
- MEGA_S_TMC_BLT_10_v1.3.1.hex
  397 KiB
  2021-09-23 11:35:59 -05:00
- MEGA_S_TMC_BLT_11_v1.3.1.hex
  397 KiB
  2021-09-23 11:36:00 -05:00
- MEGA_S_TMC_v1.3.1.hex
  365 KiB
  2021-09-23 11:36:01 -05:00
- MEGA_S_v1.3.1.hex
  366 KiB
  2021-09-23 11:36:02 -05:00
- MEGA_TMC_BLT_10_v1.3.1.hex
  397 KiB
  2021-09-23 11:36:02 -05:00
- MEGA_TMC_BLT_11_v1.3.1.hex
  397 KiB
  2021-09-23 11:36:03 -05:00
- MEGA_TMC_v1.3.1.hex
  365 KiB
  2021-09-23 11:36:04 -05:00
- MEGA_X_BLT_10_v1.3.1.hex
  397 KiB
  2021-09-23 11:36:06 -05:00
- MEGA_X_BLT_11_v1.3.1.hex
  397 KiB
  2021-09-23 11:36:08 -05:00
- MEGA_X_DGUS_BLT_10_v1.3.1.hex
  399 KiB
  2021-09-23 11:36:11 -05:00
- MEGA_X_DGUS_BLT_11_v1.3.1.hex
  399 KiB
  2021-09-23 11:36:12 -05:00
- MEGA_X_DGUS_TMC_BLT_10_v1.3.1.hex
  399 KiB
  2021-09-23 11:36:13 -05:00
- MEGA_X_DGUS_TMC_BLT_11_v1.3.1.hex
  399 KiB
  2021-09-23 11:36:14 -05:00
- MEGA_X_DGUS_TMC_v1.3.1.hex
  367 KiB
  2021-09-23 11:36:16 -05:00
- MEGA_X_DGUS_v1.3.1.hex
  368 KiB
  2021-09-23 11:36:16 -05:00
- MEGA_X_TMC_BLT_10_v1.3.1.hex
  397 KiB
  2021-09-23 11:36:17 -05:00
- MEGA_X_TMC_BLT_11_v1.3.1.hex
  397 KiB
  2021-09-23 11:36:18 -05:00
- MEGA_X_TMC_v1.3.1.hex
  365 KiB
  2021-09-23 11:36:19 -05:00
- MEGA_X_v1.3.1.hex
  366 KiB
  2021-09-23 11:36:20 -05:00
- MEGA_v1.3.1.hex
  366 KiB
  2021-09-23 11:36:05 -05:00

30 Releases 37 Tags

1.3.1 Stable

Important: Be sure to select "LOAD FW DEFAULTS" and "SAVE EEPROM" via Special Menu after updating!