wp/Marlin-2-0-x-Anycubic-i3-MEGA-S
1
0
Fork 0
Code Issues 28 Pull Requests 2 Actions Packages Projects Releases 30 Wiki Activity

Updated BLTouch Installation (english) (markdown)

Oliver Köster
2020-08-11 18:11:58 +02:00
parent 7e4c0bc20c
commit 3bbba69388
1 changed files with 2 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
BLTouch-Installation-(english).md

@@ -100,11 +100,11 @@ If you now switch on the printer, the tip of the sensor would have to move in an
The installation can be done as usual via Cura. If you're not sure which board you have, try the 1.0 (_10 mark) first from here: https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S / # downloads The installation can be done as usual via Cura. If you're not sure which board you have, try the 1.0 (_10 mark) first from here: https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S / # downloads
### test 2 ### Test 2
Start the BLTouch leveling via the special menu. After moving to Home, the nozzle lifts up and moves to the first point at X40 Y40 and should then extend the tip of the sensor. If that doesn't happen **IMMEDIATELY** switch off the printer and try the firmware with the **_11** mark. If it still doesn't work, the wiring is incorrect. Start the BLTouch leveling via the special menu. After moving to Home, the nozzle lifts up and moves to the first point at X40 Y40 and should then extend the tip of the sensor. If that doesn't happen **IMMEDIATELY** switch off the printer and try the firmware with the **_11** mark. If it still doesn't work, the wiring is incorrect.
## configuration ## Configuration
For the next steps we need the printer, a PC and Pronterface For the next steps we need the printer, a PC and Pronterface