Updated BLTouch Installation (english) (markdown)
@@ -115,16 +115,16 @@ For the next steps we need the printer, a PC and Pronterface
|
||||
5. **G1 X40 Y40 F4000**
|
||||
6. **M280 P0 S10**
|
||||
7. **G91**
|
||||
8. Slowly lower the nozzle with ** G1 Z-1 ** or ** G1 Z-0.1 ** or ** G1 Z-0.02 ** until the sensor is triggered. NOT FURTHER!
|
||||
9. If the sensor has triggered and flashes: ** M280 P0 S160 **
|
||||
10. **M114** = Current position of the nozzle -> note! (e.g. Recv: X: 40.00 Y: 40.00 Z: 1.30 E: 0.00 Count X: 3200 Y: 3200 Z: 520)
|
||||
8. Slowly lower the nozzle with **G1 Z-1** or **G1 Z-0.1** or **G1 Z-0.02** until the sensor is triggered. NOT FURTHER!
|
||||
9. If the sensor has triggered and flashes: **M280 P0 S160**
|
||||
10. **M114** = Current position of the nozzle -> note! (e.g. Recv: X:40.00 Y:40.00 Z:1.30 E:0.00 Count X:3200 Y:3200 Z:520)
|
||||
11. **G90**
|
||||
12. **G1 X42 Y65 F4000** (values from point 10 + offset of the sensor, i.e. X = 40 + 2 and Y = 40 + 25)
|
||||
12. **G1 X42 Y65 F4000** (values from point 10 + offset of the sensor, i.e. X=40+2 and Y=40+25)
|
||||
13. **G91**
|
||||
14. Place a sheet of paper under the nozzle
|
||||
15. Slowly lower the nozzle with ** G1 Z-1 ** or ** G1 Z-0.1 ** or ** G1 Z-0.02 ** until the paper is difficult to move.
|
||||
16. **M114** = Current position of the nozzle -> note! (e.g. Recv: X: 42.00 Y: 65.00 Z: 0.70 E: 0.00 Count X: 3200 Y: 3200 Z: 520)
|
||||
17. Subtract the Z value from point 16 from that from point 10 -> 1.30 - 0.7 = ** 0.6 mm ** -> This is our Z offset.
|
||||
15. Slowly lower the nozzle with **G1 Z-1** or **G1 Z-0.1** or **G1 Z-0.02** until the paper is difficult to move.
|
||||
16. **M114** = Current position of the nozzle -> note! (e.g. Recv: X:42.00 Y:65.00 Z:0.70 E:0.00 Count X:3200 Y:3200 Z:520)
|
||||
17. Subtract the Z value from point 16 from that from point 10 -> 1.30 - 0.7 = **0.6 mm** -> This is our Z offset.
|
||||
18. **M851 Z-0.6**
|
||||
19. **M500**
|
||||
20. Carry out BL Touch leveling again via the display. Finished.
|
||||
|
Reference in New Issue
Block a user