Updated Beginner's Guide (English) (markdown)

Oliver Köster
2021-07-08 10:19:37 +02:00
parent ce4bd70184
commit e507c716f0

@@ -1,5 +1,18 @@
# Beginner's Guide
## Contents:
* [1. Identification of the printer](#1-identification-of-the-printer)
* [2. Identification of the display](#2-identification-of-the-display)
* [3. Identification of the mainboard](#3-identification-of-the-mainboard)
* [4. Download the correct firmware](#4-download-the-correct-firmware)
* [5. Install the firmware](#5-install-the-firmware)
* [6. Load default settings](#6-load-default-settings)
* [7. Setup slicer (Cura)](#7-setup-slicer-cura)
* [8. Start and end code](#8-start-and-end-code)
* [9. Calibrate the extruder](#9-calibrate-the-extruder)
* [10. PID Tuning](#10-pid-tuning)
## 1. Identification of the printer
This firmware works on many Anycubic brand 3D printers, in which a "Trigorilla" mainboard with an Atmega2560 was installed.