Update S3D profile

This commit is contained in:
David Ramiro 2019-02-06 18:18:26 +01:00
parent 01e152b456
commit a57103fb29
No known key found for this signature in database
GPG Key ID: 5B042737EBEEB736
1 changed files with 9 additions and 11 deletions

View File

@ -1,5 +1,5 @@
<?xml version="1.0"?>
<profile name="davidramiro Default PLA" version="2019-01-06 16:40:07" app="S3D-Software 4.1.1">
<profile name="davidramiro Default PLA" version="2019-02-06 18:17:40" app="S3D-Software 4.1.1">
<baseProfile>Anycubic i3 Mega</baseProfile>
<printMaterial>PLA</printMaterial>
<printQuality>Medium</printQuality>
@ -9,7 +9,7 @@
<diameter>0.4</diameter>
<autoWidth>0</autoWidth>
<width>0.4</width>
<extrusionMultiplier>1</extrusionMultiplier>
<extrusionMultiplier>0.96</extrusionMultiplier>
<useRetract>1</useRetract>
<retractionDistance>6.5</retractionDistance>
<extraRestartDistance>-0.1</extraRestartDistance>
@ -40,7 +40,7 @@
<raftBaseLayers>1</raftBaseLayers>
<raftOffset>2</raftOffset>
<raftSeparationDistance>0.2</raftSeparationDistance>
<raftTopInfill>100</raftTopInfill>
<raftTopInfill>50</raftTopInfill>
<aboveRaftSpeedMultiplier>0.3</aboveRaftSpeedMultiplier>
<useSkirt>1</useSkirt>
<skirtExtruder>0</skirtExtruder>
@ -61,7 +61,7 @@
<oozeShieldSpeedMultiplier>1</oozeShieldSpeedMultiplier>
<infillExtruder>0</infillExtruder>
<internalInfillPattern>Fast Honeycomb</internalInfillPattern>
<externalInfillPattern>Concentric</externalInfillPattern>
<externalInfillPattern>Rectilinear</externalInfillPattern>
<infillPercentage>15</infillPercentage>
<outlineOverlapPercentage>20</outlineOverlapPercentage>
<infillExtrusionWidthPercentage>100</infillExtrusionWidthPercentage>
@ -70,7 +70,7 @@
<internalInfillAngles>0</internalInfillAngles>
<overlapInternalInfillAngles>0</overlapInternalInfillAngles>
<externalInfillAngles>45,-45</externalInfillAngles>
<generateSupport>1</generateSupport>
<generateSupport>0</generateSupport>
<supportExtruder>0</supportExtruder>
<supportInfillPercentage>25</supportInfillPercentage>
<supportExtraInflation>0.2</supportExtraInflation>
@ -91,7 +91,6 @@
<isHeatedBed>0</isHeatedBed>
<stabilizeAtStartup>1</stabilizeAtStartup>
<setpoint layer="1" temperature="200"/>
<setpoint layer="2" temperature="195"/>
</temperatureController>
<temperatureController name="Heated Bed">
<temperatureNumber>0</temperatureNumber>
@ -146,7 +145,7 @@
<baudRateOverride>250000</baudRateOverride>
<overridePrinterModels>1</overridePrinterModels>
<printerModelsOverride></printerModelsOverride>
<startingGcode>G28 X0 Y0,G28 Z0,M501 ; read EEPROM for MMBL,M420 S1 ; enable MMBL,G91,G1 X5.0 Y5.0 F7200 ; nozzle clean position,G1 Z0.1 ; lower nozzle,G1 X5.0 F7200 ; clean nozzle,G1 Z0.2 ; raise nozzle,G1 Y150 E20 F600 ; prime nozzle,G90,G1 Z15 F1000,M107 ; fan off</startingGcode>
<startingGcode>G28 X0 Y0,G28 Z0,M501 ; read EEPROM to get Mesh data,M420 S1 ; enable MMBL,G91,G1 X5.0 Y5.0 F7200 ; nozzle clean position,G1 Z0.1 ; raise nozzle,G1 X5.0 F7200 ; wipe excess filament at the corner,G1 Z0.2 ; raise nozzle further,G1 Y150 E20 F600 ; prime nozzle,G90,G1 Z15 F1000 ; purge 15mm of filament,M107 ; fan off, </startingGcode>
<layerChangeGcode></layerChangeGcode>
<retractionGcode></retractionGcode>
<toolChangeGcode></toolChangeGcode>
@ -156,8 +155,8 @@
<celebrationSong>Star Wars</celebrationSong>
<postProcessing></postProcessing>
<defaultSpeed>3600</defaultSpeed>
<outlineUnderspeed>0.8</outlineUnderspeed>
<solidInfillUnderspeed>0.8</solidInfillUnderspeed>
<outlineUnderspeed>0.75</outlineUnderspeed>
<solidInfillUnderspeed>0.75</solidInfillUnderspeed>
<supportUnderspeed>0.8</supportUnderspeed>
<rapidXYspeed>4800</rapidXYspeed>
<rapidZspeed>900</rapidZspeed>
@ -204,7 +203,6 @@
<isHeatedBed>0</isHeatedBed>
<stabilizeAtStartup>1</stabilizeAtStartup>
<setpoint layer="1" temperature="200"/>
<setpoint layer="2" temperature="195"/>
</temperatureController>
<temperatureController name="Heated Bed">
<temperatureNumber>0</temperatureNumber>
@ -212,7 +210,7 @@
<stabilizeAtStartup>1</stabilizeAtStartup>
<setpoint layer="1" temperature="60"/>
</temperatureController>
<globalExtrusionMultiplier>1</globalExtrusionMultiplier>
<globalExtrusionMultiplier>0.96</globalExtrusionMultiplier>
<fanSpeed>
<setpoint layer="1" speed="0"/>
<setpoint layer="2" speed="30"/>