Oliver Köster
fe9ea826a5
Merge pull request #394 from KemalErtas/patch-1
...
Update mesh_bed_leveling.h
2022-12-19 15:16:24 +01:00
KemalErtas
24d306ccb0
Update mesh_bed_leveling.h
...
Bedleveling should run on 4MAXP2 rectangular shape beds. It has no problem with square shape.
2022-12-01 13:13:12 +03:00
Knutwurst
ac7c272403
Update Version and release date
2022-09-13 09:27:36 +02:00
Oliver Köster
38f15215f8
Merge pull request #364 from stklcode/marlin-2.1.1
...
update code base to Marlin 2.1.1
2022-09-12 16:21:58 +02:00
Stefan Kalscheuer
bd49cc3d48
config: use soft PWM for fans
...
The hardware PWM for fan control conflicts with the speaker setup. While
this has always been an issue, sanity checks now fail because of this.
We've used soft PWM in 1.4.0 and reverted back to hardware PWM in 1.4.1,
so we probably need some additional investigation and testing here.
2022-09-12 16:18:18 +02:00
Stefan Kalscheuer
867ba6abc4
README++
2022-09-12 16:18:04 +02:00
Stefan Kalscheuer
db27202614
update leveling implementation and pin config for Chiron
2022-09-12 16:18:03 +02:00
Stefan Kalscheuer
6368552ced
clean up HardwareSerial code
...
Remove unused variables, sanitize declarations and apply uncrust.
2022-09-12 16:18:02 +02:00
Stefan Kalscheuer
afee7b10c2
apply uncrust to anycubic_touchscreen
2022-09-03 09:26:38 +02:00
Stefan Kalscheuer
031c095019
remove explicit ABL inclusion from Anycubit Touchscreen code
2022-09-03 09:26:05 +02:00
Stefan Kalscheuer
bf2795c51e
add some directives to support custom target pinout
2022-09-03 09:25:33 +02:00
Stefan Kalscheuer
986e416c7f
Merge upstream changes from Marlin 2.1.1
2022-09-03 09:23:32 +02:00
Knutwurst
626283aadb
Set Z_PROBE_LOW_POINT to -2 to fix #346
2022-07-29 08:59:58 +02:00
Oliver Köster
84c181d4cf
Merge pull request #311 from ignotus666/neo-fix
...
Comment out M150.cpp
2022-06-01 15:13:24 +02:00
Knutwurst
41d069464e
Update build version
2022-05-12 13:16:27 +02:00
Knutwurst
4f459362c2
Enable Software-Endstop for Z_MIN which was disabled for BLTouch in the past.
2022-05-12 13:05:22 +02:00
Oliver Köster
4fcbe2afd0
Merge pull request #326 from stklcode/feature/325-m808
...
config: enable g-code M808 for repeat markers (#325 )
2022-05-10 18:55:04 +02:00
Stefan Kalscheuer
465f4cbf60
config: enable g-code M808 for repeat markers ( #325 )
2022-05-09 19:45:56 +02:00
Knutwurst
e3a2aeb4cf
Revert pause response to reenable M600 pause for use with octorptint.
2022-03-27 12:39:07 +02:00
ignotus
51da7acc6c
Comment out M150.cpp
...
This line needs commenting out to successfully compile with Neopixel support.
2022-03-25 08:52:13 +01:00
Knutwurst
cbc02f7f3d
Fix missing TMC26XStepper Lib build error.
2022-03-18 19:09:01 +01:00
Knutwurst
4985c9abf5
Only enable babystepping and probe offset change when BLTouch is enabled.
2022-02-23 10:08:45 +01:00
Knutwurst
0eaa8f902f
Combine M851 and Z babystepping
2022-02-23 10:03:44 +01:00
Knutwurst
7444f4bb45
Add reset to 4Max Pro routine
2022-02-21 13:06:24 +01:00
Knutwurst
0440770618
Bump version for next release
2022-02-18 10:32:20 +01:00
Knutwurst
c66f3559d7
Reenable Mesh after 4 point easy level.
2022-02-18 09:57:27 +01:00
Knutwurst
1183a5b51c
Fix bug, where Mesh was always applied when using 4 point easy leveling.
2022-02-18 09:53:43 +01:00
Knutwurst
2bc946edab
Fix StopPrint when used before the actual print starts.
2022-02-13 12:43:34 +01:00
Knutwurst
3afc5c0dc1
Automatically disable steppers after stopping the print.
2022-02-13 12:34:32 +01:00
Knutwurst
f03df0b280
Add MEGA_P feature toggle (just in case, the implementation is used by another printer)
2022-02-10 09:37:08 +01:00
Knutwurst
b035c464dd
Implement MEGA PRO inbuilt 4 point leveling
2022-02-10 09:25:13 +01:00
Knutwurst
7071629534
Switch back to HardwarePWM to prevent ticking noise from power supply while heating the bed.
2022-02-09 10:37:35 +01:00
Knutwurst
23609b0d40
Move all images from main repository to wiki repo.
2022-02-08 16:12:48 +01:00
Knutwurst
fd35e6b0f8
Bump version and date to enable new release version.
2022-02-07 15:13:34 +01:00
Knutwurst
ff88387916
Remove 8+3 filename crap when usind longer files on Anycubic 0.0.2 Display. It's now cut off at 26 characters but still displayed.
2022-02-04 23:36:04 +01:00
Knutwurst
b217d9fe69
Fix lockup and freeze for DGUS variants when pressing STOP while printing from SD card.
2022-02-04 19:44:38 +01:00
Knutwurst
de61898c55
Add Patch Marker
2022-02-03 21:46:49 +01:00
Knutwurst
d95fcd7673
Some minor fixes.
2022-02-03 12:14:56 +01:00
Knutwurst
eb57d10ec3
Cleanup dependencies since these sources are not needed.
2022-02-03 09:32:35 +01:00
Knutwurst
7852f925ce
New PID values for new thermistor type.
2022-02-01 13:06:06 +01:00
Knutwurst
e32e753ebf
Some M600 and Filament Runout Fixes.
2022-02-01 12:29:25 +01:00
Knutwurst
8e2c5513d1
Add Buildflags Image for documentation.
2022-01-30 21:58:48 +01:00
Knutwurst
8cdd188612
Add image for Documentation.
2022-01-30 15:56:08 +01:00
Knutwurst
b2e68e6fa8
Add more Images.
2022-01-30 15:55:36 +01:00
Knutwurst
e0819d42de
Add images.
2022-01-30 15:55:19 +01:00
Knutwurst
790e3ec512
Cleanup pause feature from any custom code, because it's not needed anymore.
2022-01-28 13:01:01 +01:00
Knutwurst
e5271d7b2f
Optimize Extruder Feedrates and turn off fans at pause.
2022-01-27 16:08:45 +01:00
Knutwurst
69328f5246
Go back to A4988 timings on Mega Pro to (hopefully) fix whining noise.
2022-01-25 09:37:29 +01:00
Knutwurst
d19dbf0be5
Use software PWM for fans and heaters to minimize fan noise and support bigger fans. Also use pwm dithering to ensure the same fan speed resolution.
2022-01-24 21:14:35 +01:00
Knutwurst
425f89e924
New PID Values for new thermistor settings
2022-01-24 19:47:03 +01:00
