Merge pull request #557 from stklcode/marlin-2.1.2.5

Merge upstream changes from Marlin 2.1.2.5

.aiderignore

@@ -0,0 +1,21 @@
+# Build artifacts
+buildroot/
+*.o
+*.a
+*.so
+*.dylib
+*.dll
+*.exe
+
+# Web assets
+*.min.js
+*.min.css
+
+# Generated files
+__pycache__/
+*.pyc
+.DS_Store
+
+# IDE files
+.vscode/
+.idea/

.clang-format

@@ -0,0 +1,222 @@
+---
+Language:        Cpp
+# BasedOnStyle:  LLVM
+AccessModifierOffset: -2
+AlignAfterOpenBracket: Align
+AlignArrayOfStructures: None
+AlignConsecutiveAssignments:
+  Enabled:         true
+  AcrossEmptyLines: false
+  AcrossComments:  true
+  AlignCompound:   true
+  PadOperators:    true
+AlignConsecutiveBitFields:
+  Enabled:         true
+  AcrossEmptyLines: false
+  AcrossComments:  true
+  AlignCompound:   false
+  PadOperators:    false
+AlignConsecutiveDeclarations:
+  Enabled:         true
+  AcrossEmptyLines: false
+  AcrossComments:  true
+  AlignCompound:   false
+  PadOperators:    false
+AlignConsecutiveMacros:
+  Enabled:         true
+  AcrossEmptyLines: false
+  AcrossComments:  true
+  AlignCompound:   false
+  PadOperators:    false
+AlignEscapedNewlines: Right
+AlignOperands:   Align
+AlignTrailingComments:
+  Kind:            Always
+  OverEmptyLines:  0
+AllowAllArgumentsOnNextLine: true
+AllowAllParametersOfDeclarationOnNextLine: true
+AllowShortBlocksOnASingleLine: Never
+AllowShortCaseLabelsOnASingleLine: false
+AllowShortEnumsOnASingleLine: true
+AllowShortFunctionsOnASingleLine: All
+AllowShortIfStatementsOnASingleLine: Never
+AllowShortLambdasOnASingleLine: All
+AllowShortLoopsOnASingleLine: false
+AlwaysBreakAfterDefinitionReturnType: None
+AlwaysBreakAfterReturnType: None
+AlwaysBreakBeforeMultilineStrings: false
+AlwaysBreakTemplateDeclarations: MultiLine
+AttributeMacros:
+  - __capability
+BinPackArguments: true
+BinPackParameters: true
+BitFieldColonSpacing: Both
+BraceWrapping:
+  AfterCaseLabel:  false
+  AfterClass:      false
+  AfterControlStatement: Never
+  AfterEnum:       false
+  AfterExternBlock: false
+  AfterFunction:   false
+  AfterNamespace:  false
+  AfterObjCDeclaration: false
+  AfterStruct:     false
+  AfterUnion:      false
+  BeforeCatch:     true
+  BeforeElse:      true
+  BeforeLambdaBody: false
+  BeforeWhile:     false
+  IndentBraces:    true
+  SplitEmptyFunction: true
+  SplitEmptyRecord: true
+  SplitEmptyNamespace: true
+BreakAfterAttributes: Never
+BreakArrays:     true
+BreakBeforeBinaryOperators: None
+BreakBeforeConceptDeclarations: Always
+BreakBeforeBraces: Attach
+BreakBeforeInlineASMColon: OnlyMultiline
+BreakBeforeTernaryOperators: true
+BreakConstructorInitializers: BeforeColon
+BreakInheritanceList: BeforeColon
+BreakStringLiterals: true
+ColumnLimit:     120
+CommentPragmas:  '^ IWYU pragma:'
+CompactNamespaces: false
+ConstructorInitializerIndentWidth: 4
+ContinuationIndentWidth: 4
+Cpp11BracedListStyle: true
+DerivePointerAlignment: false
+DisableFormat:   false
+EmptyLineAfterAccessModifier: Never
+EmptyLineBeforeAccessModifier: LogicalBlock
+ExperimentalAutoDetectBinPacking: false
+FixNamespaceComments: true
+ForEachMacros:
+  - foreach
+  - Q_FOREACH
+  - BOOST_FOREACH
+IfMacros:
+  - KJ_IF_MAYBE
+IncludeBlocks:   Preserve
+IncludeCategories:
+  - Regex:           '^"(llvm|llvm-c|clang|clang-c)/'
+    Priority:        2
+    SortPriority:    0
+    CaseSensitive:   false
+  - Regex:           '^(<|"(gtest|gmock|isl|json)/)'
+    Priority:        3
+    SortPriority:    0
+    CaseSensitive:   false
+  - Regex:           '.*'
+    Priority:        1
+    SortPriority:    0
+    CaseSensitive:   false
+IncludeIsMainRegex: '(Test)?$'
+IncludeIsMainSourceRegex: ''
+IndentAccessModifiers: true
+IndentCaseBlocks: true
+IndentCaseLabels: true
+IndentExternBlock: AfterExternBlock
+IndentGotoLabels: true
+IndentPPDirectives: BeforeHash
+IndentRequiresClause: true
+IndentWidth:     2
+IndentWrappedFunctionNames: true
+InsertBraces:    true
+InsertNewlineAtEOF: true
+InsertTrailingCommas: None
+IntegerLiteralSeparator:
+  Binary:          0
+  BinaryMinDigits: 0
+  Decimal:         0
+  DecimalMinDigits: 0
+  Hex:             0
+  HexMinDigits:    0
+KeepEmptyLinesAtTheStartOfBlocks: true
+LambdaBodyIndentation: Signature
+LineEnding:      DeriveLF
+MacroBlockBegin: ''
+MacroBlockEnd:   ''
+MaxEmptyLinesToKeep: 2
+NamespaceIndentation: All
+ObjCBinPackProtocolList: Auto
+ObjCBlockIndentWidth: 2
+ObjCBreakBeforeNestedBlockParam: true
+ObjCSpaceAfterProperty: false
+ObjCSpaceBeforeProtocolList: true
+PackConstructorInitializers: BinPack
+PenaltyBreakAssignment: 2
+PenaltyBreakBeforeFirstCallParameter: 19
+PenaltyBreakComment: 300
+PenaltyBreakFirstLessLess: 120
+PenaltyBreakOpenParenthesis: 0
+PenaltyBreakString: 1000
+PenaltyBreakTemplateDeclaration: 10
+PenaltyExcessCharacter: 1000000
+PenaltyIndentedWhitespace: 0
+PenaltyReturnTypeOnItsOwnLine: 60
+PointerAlignment: Left
+PPIndentWidth:   -1
+QualifierAlignment: Leave
+ReferenceAlignment: Pointer
+ReflowComments:  true
+RemoveBracesLLVM: false
+RemoveSemicolon: false
+RequiresClausePosition: OwnLine
+RequiresExpressionIndentation: OuterScope
+SeparateDefinitionBlocks: Leave
+ShortNamespaceLines: 1
+SortIncludes:    CaseSensitive
+SortJavaStaticImport: Before
+SortUsingDeclarations: LexicographicNumeric
+SpaceAfterCStyleCast: false
+SpaceAfterLogicalNot: false
+SpaceAfterTemplateKeyword: true
+SpaceAroundPointerQualifiers: Default
+SpaceBeforeAssignmentOperators: true
+SpaceBeforeCaseColon: false
+SpaceBeforeCpp11BracedList: false
+SpaceBeforeCtorInitializerColon: true
+SpaceBeforeInheritanceColon: true
+SpaceBeforeParens: ControlStatements
+SpaceBeforeParensOptions:
+  AfterControlStatements: true
+  AfterForeachMacros: true
+  AfterFunctionDefinitionName: false
+  AfterFunctionDeclarationName: false
+  AfterIfMacros:   true
+  AfterOverloadedOperator: false
+  AfterRequiresInClause: false
+  AfterRequiresInExpression: false
+  BeforeNonEmptyParentheses: false
+SpaceBeforeRangeBasedForLoopColon: true
+SpaceBeforeSquareBrackets: false
+SpaceInEmptyBlock: false
+SpaceInEmptyParentheses: false
+SpacesBeforeTrailingComments: 1
+SpacesInAngles:  Never
+SpacesInConditionalStatement: false
+SpacesInContainerLiterals: true
+SpacesInCStyleCastParentheses: false
+SpacesInLineCommentPrefix:
+  Minimum:         1
+  Maximum:         -1
+SpacesInParentheses: false
+SpacesInSquareBrackets: false
+Standard:        Latest
+StatementAttributeLikeMacros:
+  - Q_EMIT
+StatementMacros:
+  - Q_UNUSED
+  - QT_REQUIRE_VERSION
+TabWidth:        8
+UseTab:          Never
+WhitespaceSensitiveMacros:
+  - BOOST_PP_STRINGIZE
+  - CF_SWIFT_NAME
+  - NS_SWIFT_NAME
+  - PP_STRINGIZE
+  - STRINGIZE
+...
+

.devcontainer/Dockerfile

@@ -0,0 +1,29 @@
+# See here for image contents: https://github.com/microsoft/vscode-dev-containers/tree/v0.187.0/containers/python-3/.devcontainer/base.Dockerfile
+
+# [Choice] Python version: 3, 3.9, 3.8, 3.7, 3.6
+ARG VARIANT="3.9.0-buster"
+FROM python:${VARIANT}
+
+# [Option] Install Node.js
+ARG INSTALL_NODE="true"
+ARG NODE_VERSION="lts/*"
+RUN if [ "${INSTALL_NODE}" = "true" ]; then su vscode -c "umask 0002 && . /usr/local/share/nvm/nvm.sh && nvm install ${NODE_VERSION} 2>&1"; fi
+
+# [Optional] If your pip requirements rarely change, uncomment this section to add them to the image.
+# COPY requirements.txt /tmp/pip-tmp/
+# RUN pip3 --disable-pip-version-check --no-cache-dir install -r /tmp/pip-tmp/requirements.txt \
+#    && rm -rf /tmp/pip-tmp
+
+# [Optional] Uncomment this section to install additional OS packages.
+# RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \
+#     && apt-get -y install --no-install-recommends <your-package-list-here>
+
+# [Optional] Uncomment this line to install global node packages.
+# RUN su vscode -c "source /usr/local/share/nvm/nvm.sh && npm install -g <your-package-here>" 2>&1
+
+
+RUN pip install -U https://github.com/platformio/platformio-core/archive/develop.zip
+RUN platformio update
+# To get the test platforms
+RUN pip install PyYaml
+#ENV PATH /code/buildroot/bin/:/code/buildroot/tests/:${PATH}

.devcontainer/devcontainer.json

@@ -0,0 +1,51 @@
+// For format details, see https://aka.ms/devcontainer.json. For config options, see the README at:
+// https://github.com/microsoft/vscode-dev-containers/tree/v0.187.0/containers/python-3
+{
+  "name": "Python 3",
+  "build": {
+    "dockerfile": "Dockerfile",
+    "context": "..",
+    "args": {
+      // Update 'VARIANT' to pick a Python version: 3, 3.6, 3.7, 3.8, 3.9
+      "VARIANT": "3.9.0-buster",
+      // Options
+      "INSTALL_NODE": "false",
+      "NODE_VERSION": "lts/*"
+    }
+  },
+
+  // Set *default* container specific settings.json values on container create.
+  "settings": {
+    "python.pythonPath": "/usr/local/bin/python",
+    "python.languageServer": "Pylance",
+    "python.linting.enabled": true,
+    "python.linting.pylintEnabled": true,
+    "python.formatting.autopep8Path": "/usr/local/py-utils/bin/autopep8",
+    "python.formatting.blackPath": "/usr/local/py-utils/bin/black",
+    "python.formatting.yapfPath": "/usr/local/py-utils/bin/yapf",
+    "python.linting.banditPath": "/usr/local/py-utils/bin/bandit",
+    "python.linting.flake8Path": "/usr/local/py-utils/bin/flake8",
+    "python.linting.mypyPath": "/usr/local/py-utils/bin/mypy",
+    "python.linting.pycodestylePath": "/usr/local/py-utils/bin/pycodestyle",
+    "python.linting.pydocstylePath": "/usr/local/py-utils/bin/pydocstyle",
+    "python.linting.pylintPath": "/usr/local/py-utils/bin/pylint"
+  },
+
+  // Add the IDs of extensions you want installed when the container is created.
+  "extensions": [
+    "ms-python.python",
+    "ms-python.vscode-pylance",
+    "platformio.platformio-ide",
+    "marlinfirmware.auto-build",
+    "editorconfig.editorconfig"
+  ],
+
+  // Use 'forwardPorts' to make a list of ports inside the container available locally.
+  // "forwardPorts": [],
+
+  // Use 'postCreateCommand' to run commands after the container is created.
+  // "postCreateCommand": "pip3 install --user -r requirements.txt",
+
+  // Comment out connect as root instead. More info: https://aka.ms/vscode-remote/containers/non-root.
+  // "remoteUser": "vscode"
+}

.editorconfig

@@ -1,19 +1,29 @@
 # editorconfig.org
 root = true
 
+[*]
+trim_trailing_whitespace = true
+insert_final_newline = true
+
 [{*.patch,syntax_test_*}]
 trim_trailing_whitespace = false
 
+[{*.c,*.cpp,*.h,*.ino,*.py,Makefile}]
+end_of_line = lf
+
 [{*.c,*.cpp,*.h,*.ino}]
 charset = utf-8
-
-[{*.c,*.cpp,*.h,*.ino,Makefile}]
-trim_trailing_whitespace = true
-insert_final_newline = true
-end_of_line = lf
 indent_style = space
 indent_size = 2
 
+[{Makefile}]
+indent_style = tab
+indent_size = 2
+
+[*.md]
+# Two spaces at the end of the line means newline in Markdown
+trim_trailing_whitespace = false
+
 [{*.py}]
 indent_style = space
 indent_size = 4

.github/code_of_conduct.md

@@ -28,15 +28,9 @@ Project maintainers are responsible for clarifying the standards of acceptable b
 
 Project maintainers have the right and responsibility to remove, edit, or reject comments, commits, code, issues, and other contributions that are not aligned to this Code of Conduct, or to ban temporarily or permanently any contributor for other behaviors that they deem inappropriate, threatening, offensive, or harmful.
 
-## Scope
-
-This Code of Conduct applies both within project spaces and in public spaces when an individual is representing the project or its community. Examples of representing a project or community include using an official project e-mail address, posting via an official social media account, or acting as an appointed representative at an online or offline event. Representation of a project may be further defined and clarified by project maintainers.
-
 ## Enforcement
 
-Instances of abusive, harassing, or otherwise unacceptable behavior may be reported by contacting the project team at [marlinfirmware@github.com](mailto:marlinfirmware@github.com). All complaints will be reviewed and investigated and will result in a response that is deemed necessary and appropriate to the circumstances. The project team is obligated to maintain confidentiality with regard to the reporter of an incident. Further details of specific enforcement policies may be posted separately.
-
-Project maintainers who do not follow or enforce the Code of Conduct in good faith may face temporary or permanent repercussions as determined by other members of the project's leadership.
+Instances of abusive, harassing, or otherwise unacceptable behavior may be reported by following GitHub's [reporting abuse or spam article](https://docs.github.com/en/communities/maintaining-your-safety-on-github/reporting-abuse-or-spam). All complaints will be reviewed and investigated and will result in a response that is deemed necessary and appropriate to the circumstances.
 
 ## Attribution
 

.github/contributing.md

@@ -26,11 +26,12 @@ The following is a set of guidelines for contributing to Marlin, hosted by the [
 
 ## Code of Conduct
 
-This project and everyone participating in it is governed by the [Marlin Code of Conduct](code_of_conduct.md). By participating, you are expected to uphold this code. Please report unacceptable behavior to [marlinfirmware@github.com](mailto:marlinfirmware@github.com).
+This project and everyone participating in it is governed by the [Marlin Code of Conduct](code_of_conduct.md). By participating, you are expected to uphold this code. Please report unacceptable behavior by following GitHub's [reporting abuse or spam article](https://docs.github.com/en/communities/maintaining-your-safety-on-github/reporting-abuse-or-spam).
 
 ## I don't want to read this whole thing I just have a question!!!
 
-> **Note:** Please don't file an issue to ask a question. You'll get faster results by using the resources below.
+> [!NOTE]
+> Please don't file an issue to ask a question. You'll get faster results by using the resources below.
 
 We have a Message Board and a Facebook group where our knowledgable user community can provide helpful advice if you have questions.
 
@@ -55,7 +56,8 @@ This section guides you through submitting a Bug Report for Marlin. Following th
 
 Before creating a Bug Report, please test the "nightly" development branch, as you might find out that you don't need to create one. When you are creating a Bug Report, please [include as many details as possible](#how-do-i-submit-a-good-bug-report). Fill out [the required template](ISSUE_TEMPLATE/bug_report.yml), the information it asks for helps us resolve issues faster.
 
-> **Note:** Regressions can happen. If you find a **Closed** issue that seems like your issue, go ahead and open a new issue and include a link to the original issue in the body of your new one. All you need to create a link is the issue number, preceded by #. For example, #8888.
+> [!NOTE]
+> Regressions can happen. If you find a **Closed** issue that seems like your issue, go ahead and open a new issue and include a link to the original issue in the body of your new one. All you need to create a link is the issue number, preceded by #. For example, #8888.
 
 #### How Do I Submit A (Good) Bug Report?
 

.github/pull_request_template.md

@@ -28,9 +28,6 @@ Clearly describe the submitted changes with lots of details. Include images wher
 
 <!-- Attach Configurations ZIP and any other files needed to test this PR. -->
 
-### Configurations
-
-<!-- Attach any Configuration.h, Configuration_adv.h, or platformio.ini files needed to compile/test your Pull Request. -->
 
 ### Related Issues
 

.github/workflows/build-all.yml

@@ -90,10 +90,10 @@ jobs:
 
     steps:
 
-    - name: Setup Python 3.7
-      uses: actions/setup-python@v1
+    - name: Setup Python
+      uses: actions/setup-python@v5
       with:
-        python-version: '3.7' # Version range or exact version of a Python version to use, using semvers version range syntax.
+        python-version: '3.10' # Version range or exact version of a Python version to use, using semvers version range syntax.
         architecture: 'x64' # optional x64 or x86. Defaults to x64 if not specified
 
     - name: Install PlatformIO
@@ -124,7 +124,7 @@ jobs:
     #     .pio/build/${{ matrix.platform }}/${{ matrix.platform }}_v*.hex
 
     - name: Archive all artifacts into one ZIP file
-      uses: actions/upload-artifact@master
+      uses: actions/upload-artifact@v3
       with:
         name: Knuwurst-all-in-one-${{github.sha}}
         path: |

.gitignore

@@ -21,35 +21,21 @@
 
 # Generated files
 _Version.h
-bdf2u8g
+bdf2u8g.exe
+genpages.exe
 marlin_config.json
 mczip.h
+language*.csv
+out-csv/
+out-language/
 *.gen
 *.sublime-workspace
 
-#
 # OS
-#
 applet/
 .DS_Store
 
-#
-# Misc
-#
-*~
-*.orig
-*.rej
-*.bak
-*.idea
-*.i
-*.ii
-*.swp
-tags
-
-#
-# C++
-#
-# Compiled Object files
+# Compiled C++ Object files
 *.slo
 *.lo
 *.o
@@ -80,10 +66,7 @@ tags
 *.out
 *.app
 
-#
-# C
-#
-# Object files
+# Compiled C Object files
 *.o
 *.ko
 *.obj
@@ -142,15 +125,18 @@ vc-fileutils.settings
 # Visual Studio Code
 .vscode/*
 !.vscode/extensions.json
+*.code-workspace
 
-#Simulation
+# Simulation files
 imgui.ini
 eeprom.dat
 spi_flash.bin
 fs.img
 
-#cmake
+# CMake
+buildroot/share/cmake/*
 CMakeLists.txt
+!buildroot/share/cmake/CMakeLists.txt
 src/CMakeLists.txt
 CMakeListsPrivate.txt
 build/
@@ -170,3 +156,19 @@ __pycache__
 
 # IOLogger logs
 *_log.csv
+
+# Misc.
+*~
+*.orig
+*.rej
+*.bak
+*.idea
+*.i
+*.ii
+*.swp
+tags
+*.logs
+*.bak
+.aider*
+!.aiderignore
+.env

.vscode/extensions.json

@@ -6,6 +6,7 @@
         "platformio.platformio-ide"
     ],
     "unwantedRecommendations": [
+        "ms-vscode-remote.remote-containers",
         "ms-vscode.cpptools-extension-pack"
     ]
 }

.zed/settings.json

@@ -0,0 +1,16 @@
+/**
+ * Marlin-specific settings for Zed
+ *
+ * For a full list of overridable settings, and general information on folder-specific settings,
+ * see the documentation: https://zed.dev/docs/configuring-zed#settings-files
+ */
+{
+  "languages": {
+    "C": {
+      "enable_language_server": false
+    },
+    "C++": {
+      "enable_language_server": false
+    }
+  }
+}

Makefile

@@ -1,11 +1,18 @@
+SCRIPTS_DIR := buildroot/share/scripts
+CONTAINER_RT_BIN := docker
+CONTAINER_RT_OPTS := --rm -v $(PWD):/code -v platformio-cache:/root/.platformio
+CONTAINER_IMAGE := marlin-dev
+
 help:
 	@echo "Tasks for local development:"
-	@echo "* tests-single-ci:             Run a single test from inside the CI"
-	@echo "* tests-single-local:          Run a single test locally"
-	@echo "* tests-single-local-docker:   Run a single test locally, using docker-compose"
-	@echo "* tests-all-local:             Run all tests locally"
-	@echo "* tests-all-local-docker:      Run all tests locally, using docker-compose"
-	@echo "* setup-local-docker:          Setup local docker-compose"
+	@echo "make marlin                    : Build marlin for the configured board"
+	@echo "make format-pins               : Reformat all pins files"
+	@echo "make tests-single-ci           : Run a single test from inside the CI"
+	@echo "make tests-single-local        : Run a single test locally"
+	@echo "make tests-single-local-docker : Run a single test locally, using docker"
+	@echo "make tests-all-local           : Run all tests locally"
+	@echo "make tests-all-local-docker    : Run all tests locally, using docker"
+	@echo "make setup-local-docker        : Build the local docker image"
 	@echo ""
 	@echo "Options for testing:"
 	@echo "  TEST_TARGET          Set when running tests-single-*, to select the"
@@ -18,35 +25,41 @@ help:
 	@echo "  VERBOSE_PLATFORMIO   If you want the full PIO output, set any value"
 	@echo "  GIT_RESET_HARD       Used by CI: reset all local changes. WARNING:"
 	@echo "                       THIS WILL UNDO ANY CHANGES YOU'VE MADE!"
-.PHONY: help
+
+marlin:
+	./buildroot/bin/mftest -a
+.PHONY: marlin
 
 tests-single-ci:
 	export GIT_RESET_HARD=true
-	$(MAKE) tests-single-local TEST_TARGET=$(TEST_TARGET)
-.PHONY: tests-single-ci
+	$(MAKE) tests-single-local TEST_TARGET=$(TEST_TARGET) PLATFORMIO_BUILD_FLAGS=-DGITHUB_ACTION
 
 tests-single-local:
 	@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make tests-all-local" ; return 1; fi
 	export PATH="./buildroot/bin/:./buildroot/tests/:${PATH}" \
 	  && export VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) \
 	  && run_tests . $(TEST_TARGET) "$(ONLY_TEST)"
-.PHONY: tests-single-local
 
 tests-single-local-docker:
 	@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make tests-all-local-docker" ; return 1; fi
-	docker-compose run --rm marlin $(MAKE) tests-single-local TEST_TARGET=$(TEST_TARGET) VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD) ONLY_TEST="$(ONLY_TEST)"
-.PHONY: tests-single-local-docker
+	@if ! $(CONTAINER_RT_BIN) images -q $(CONTAINER_IMAGE) > /dev/null ; then $(MAKE) setup-local-docker ; fi
+	$(CONTAINER_RT_BIN) run $(CONTAINER_RT_OPTS) $(CONTAINER_IMAGE) $(MAKE) tests-single-local TEST_TARGET=$(TEST_TARGET) VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD) ONLY_TEST="$(ONLY_TEST)"
 
 tests-all-local:
 	export PATH="./buildroot/bin/:./buildroot/tests/:${PATH}" \
 	  && export VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) \
-	  && for TEST_TARGET in $$(./get_test_targets.py) ; do echo "Running tests for $$TEST_TARGET" ; run_tests . $$TEST_TARGET ; done
-.PHONY: tests-all-local
+	  && for TEST_TARGET in $$($(SCRIPTS_DIR)/get_test_targets.py) ; do echo "Running tests for $$TEST_TARGET" ; run_tests . $$TEST_TARGET ; done
 
 tests-all-local-docker:
-	docker-compose run --rm marlin $(MAKE) tests-all-local VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD)
-.PHONY: tests-all-local-docker
+	@if ! $(CONTAINER_RT_BIN) images -q $(CONTAINER_IMAGE) > /dev/null ; then $(MAKE) setup-local-docker ; fi
+	$(CONTAINER_RT_BIN) run $(CONTAINER_RT_OPTS) $(CONTAINER_IMAGE) $(MAKE) tests-all-local VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD)
 
 setup-local-docker:
-	docker-compose build
-.PHONY: setup-local-docker
+	$(CONTAINER_RT_BIN) build -t $(CONTAINER_IMAGE) -f docker/Dockerfile .
+
+PINS := $(shell find Marlin/src/pins -mindepth 2 -name '*.h')
+
+$(PINS): %:
+	@echo "Formatting $@" && node $(SCRIPTS_DIR)/pinsformat.js $@
+
+format-pins: $(PINS)

Marlin/Makefile

@@ -63,8 +63,8 @@ HARDWARE_MOTHERBOARD ?= 1020
 
 ifeq ($(OS),Windows_NT)
   # Windows
-  ARDUINO_INSTALL_DIR ?= ${HOME}/Arduino
-  ARDUINO_USER_DIR ?= ${HOME}/Arduino
+  ARDUINO_INSTALL_DIR ?= ${HOME}/AppData/Local/Arduino
+  ARDUINO_USER_DIR ?= ${HOME}/Documents/Arduino
 else
   UNAME_S := $(shell uname -s)
   ifeq ($(UNAME_S),Linux)
@@ -82,11 +82,11 @@ endif
 
 # Arduino source install directory, and version number
 # On most linuxes this will be /usr/share/arduino
-ARDUINO_INSTALL_DIR  ?= ${HOME}/Arduino
-ARDUINO_VERSION      ?= 106
+ARDUINO_INSTALL_DIR  ?= ${HOME}/AppData/Local/Arduino       # C:/Users/${USERNAME}/AppData/Local/Arduino
+ARDUINO_VERSION      ?= 10819
 
 # The installed Libraries are in the User folder
-ARDUINO_USER_DIR ?= ${HOME}/Arduino
+ARDUINO_USER_DIR ?= ${HOME}/Documents/Arduino
 
 # You can optionally set a path to the avr-gcc tools.
 # Requires a trailing slash. For example, /usr/local/avr-gcc/bin/
@@ -656,18 +656,18 @@ ifeq ($(HARDWARE_VARIANT), $(filter $(HARDWARE_VARIANT),arduino Teensy Sanguino)
   # Old libraries (avr-core 1.6.21 < / Arduino < 1.6.8)
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI
   # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI/src
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/arduino/avr/1.8.6/libraries/SPI/src
 endif
 
 ifeq ($(IS_MCU),1)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/cores/arduino
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/arduino/avr/1.8.6/cores/arduino
 
   # Old libraries (avr-core 1.6.21 < / Arduino < 1.6.8)
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SoftwareSerial
   # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI/src
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SoftwareSerial/src
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/arduino/avr/1.8.6/libraries/SPI/src
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/arduino/avr/1.8.6/libraries/SoftwareSerial/src
 endif
 
 VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidCrystal/src
@@ -681,17 +681,17 @@ ifeq ($(WIRE), 1)
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire
   VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/utility
   # New libraries (avr-core >= 1.6.21 / Arduino >= 1.6.8)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/src
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/Wire/src/utility
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/avr/1.8.6/libraries/Wire/src
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/avr/1.8.6/libraries/Wire/src/utility
 endif
 ifeq ($(NEOPIXEL), 1)
 VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Adafruit_NeoPixel
 endif
 ifeq ($(U8GLIB), 1)
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib/csrc
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib/cppsrc
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib/fntsrc
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib-HAL
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib-HAL/src
+# VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib
+# VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib/src
 endif
 ifeq ($(TMC), 1)
 VPATH += $(ARDUINO_INSTALL_DIR)/libraries/TMCStepper/src
@@ -700,9 +700,9 @@ endif
 
 ifeq ($(HARDWARE_VARIANT), arduino)
   HARDWARE_SUB_VARIANT ?= mega
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/variants/$(HARDWARE_SUB_VARIANT)
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/avr/1.8.6/variants/$(HARDWARE_SUB_VARIANT)
 else ifeq ($(HARDWARE_VARIANT), Sanguino)
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/marlin/avr/variants/sanguino
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/avr/1.8.6/variants/sanguino
 else ifeq ($(HARDWARE_VARIANT), archim)
   VPATH   += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/system/libsam
   VPATH   += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/system/CMSIS/CMSIS/Include/
@@ -718,7 +718,7 @@ else ifeq ($(HARDWARE_VARIANT), archim)
   LDLIBS   = $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/variants/archim/libsam_sam3x8e_gcc_rel.a
 else
   HARDWARE_SUB_VARIANT ?= standard
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/$(HARDWARE_VARIANT)/variants/$(HARDWARE_SUB_VARIANT)
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/avr/1.8.6/variants/$(HARDWARE_SUB_VARIANT)
 endif
 
 LIB_SRC = wiring.c \
@@ -733,7 +733,7 @@ endif
 
 ifeq ($(HARDWARE_VARIANT), Teensy)
   LIB_SRC = wiring.c
-  VPATH += $(ARDUINO_INSTALL_DIR)/hardware/teensy/cores/teensy
+  VPATH += $(ARDUINO_INSTALL_DIR)/packages/arduino/hardware/teensy/cores/teensy
 endif
 
 LIB_CXXSRC = WMath.cpp WString.cpp Print.cpp SPI.cpp
@@ -880,7 +880,7 @@ AVRDUDE_WRITE_FLASH = -Uflash:w:$(BUILD_DIR)/$(TARGET).hex:i
 ifeq ($(shell uname -s), Linux)
   AVRDUDE_CONF = /etc/avrdude/avrdude.conf
 else
-  AVRDUDE_CONF = $(ARDUINO_INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf
+  AVRDUDE_CONF = $(ARDUINO_INSTALL_DIR)/packages/arduino/tools/avrdude/6.3.0-arduino17/etc/avrdude.conf
 endif
 AVRDUDE_FLAGS = -D -C$(AVRDUDE_CONF) \
   -p$(PROG_MCU) -P$(AVRDUDE_PORT) -c$(AVRDUDE_PROGRAMMER) \

Marlin/Marlin.ino

@@ -2,7 +2,7 @@
 
   Marlin Firmware
 
-  (c) 2011-2020 MarlinFirmware
+  (c) 2011-2024 MarlinFirmware
   Portions of Marlin are (c) by their respective authors.
   All code complies with GPLv2 and/or GPLv3
 
@@ -27,7 +27,7 @@ Configuration
   - https://github.com/MarlinFirmware/Configurations
     Example configurations for several printer models.
 
-  - https://www.youtube.com/watch?v=3gwWVFtdg-4
+  - https://youtu.be/3gwWVFtdg-4
     A good 20-minute overview of Marlin configuration by Tom Sanladerer.
     (Applies to Marlin 1.0.x, so Jerk and Acceleration should be halved.)
     Also... https://www.google.com/search?tbs=vid%3A1&q=configure+marlin

Marlin/Version.h

@@ -28,7 +28,7 @@
 /**
  * Marlin release version identifier
  */
-//#define SHORT_BUILD_VERSION "2.1.2"
+//#define SHORT_BUILD_VERSION "2.1.2.5"
 
 /**
  * Verbose version identifier which should contain a reference to the location
@@ -41,7 +41,14 @@
  * here we define this default string as the date where the latest release
  * version was tagged.
  */
-//#define STRING_DISTRIBUTION_DATE "2022-08-06"
+//#define STRING_DISTRIBUTION_DATE "2024-11-18"
+
+/**
+ * The protocol for communication to the host. Protocol indicates communication
+ * standards such as the use of ASCII, "echo:" and "error:" line prefixes, etc.
+ * (Other behaviors are given by the firmware version and capabilities report.)
+ */
+//#define PROTOCOL_VERSION "1.0"
 
 /**
  * Defines a generic printer name to be output to the LCD after booting Marlin.
@@ -68,8 +75,8 @@
 //#define WEBSITE_URL "marlinfw.org"
 
 /**
- * Set the vendor info the serial USB interface, if changable
- * Currently only supported by DUE platform
+ * Set the vendor info the serial USB interface, if changeable.
+ * Currently only supported by DUE platform.
  */
 //#define USB_DEVICE_VENDOR_ID           0x0000
 //#define USB_DEVICE_PRODUCT_ID          0x0000

Marlin/config.ini

@@ -3,10 +3,50 @@
 # config.ini - Options to apply before the build
 #
 [config:base]
+#
+# ini_use_config - A comma-separated list of actions to apply to the Configuration files.
+#                  The actions will be applied in the listed order.
+#  - none
+#    Ignore this file and don't apply any configuration options
+#
+#  - base
+#    Just apply the options in config:base to the configuration
+#
+#  - minimal
+#    Just apply the options in config:minimal to the configuration
+#
+#  - all
+#    Apply all 'config:*' sections in this file to the configuration
+#
+#  - another.ini
+#    Load another INI file with a path relative to this config.ini file (i.e., within Marlin/)
+#
+#  - https://me.myserver.com/path/to/configs
+#    Fetch configurations from any URL.
+#
+#  - example/Creality/Ender-5 Plus @ bugfix-2.1.x
+#    Fetch example configuration files from the MarlinFirmware/Configurations repository
+#    https://raw.githubusercontent.com/MarlinFirmware/Configurations/bugfix-2.1.x/config/examples/Creality/Ender-5%20Plus/
+#
+#  - example/default @ release-2.0.9.7
+#    Fetch default configuration files from the MarlinFirmware/Configurations repository
+#    https://raw.githubusercontent.com/MarlinFirmware/Configurations/release-2.0.9.7/config/default/
+#
+#  - [disable]
+#    Comment out all #defines in both Configuration.h and Configuration_adv.h. This is useful
+#    to start with a clean slate before applying any config: options, so only the options explicitly
+#    set in config.ini will be enabled in the configuration.
+#
+#  - [flatten] (Not yet implemented)
+#    Produce a flattened set of Configuration.h and Configuration_adv.h files with only the enabled
+#    #defines and no comments. A clean look, but context-free.
+#
 ini_use_config                           = none
 
 # Load all config: sections in this file
 ;ini_use_config                          = all
+# Disable everything and apply subsequent config:base options
+;ini_use_config                          = [disable], base
 # Load config file relative to Marlin/
 ;ini_use_config                          = another.ini
 # Download configurations from GitHub
@@ -42,7 +82,7 @@ preheat_1_temp_hotend                    = 180
 bang_max                                 = 255
 pidtemp                                  = on
 pid_k1                                   = 0.95
-pid_max                                  = BANG_MAX
+pid_max                                  = 255
 pid_functional_range                     = 10
 
 default_kp                               = 22.20
@@ -100,10 +140,10 @@ invert_x_step_pin                        = false
 invert_y_step_pin                        = false
 invert_z_step_pin                        = false
 
-disable_x                                = false
-disable_y                                = false
-disable_z                                = false
-disable_e                                = false
+disable_x                                = off
+disable_y                                = off
+disable_z                                = off
+disable_e                                = off
 
 proportional_font_ratio                  = 1.0
 default_nominal_filament_dia             = 1.75
@@ -127,7 +167,7 @@ busy_while_heating                       = on
 default_ejerk                            = 5.0
 default_keepalive_interval               = 2
 default_leveling_fade_height             = 0.0
-disable_inactive_extruder                = on
+disable_other_extruders                  = on
 display_charset_hd44780                  = JAPANESE
 eeprom_boot_silent                       = on
 eeprom_chitchat                          = on
@@ -176,12 +216,12 @@ auto_report_temperatures                 = on
 autotemp                                 = on
 autotemp_oldweight                       = 0.98
 bed_check_interval                       = 5000
-default_stepper_deactive_time            = 120
+default_stepper_timeout_sec              = 120
 default_volumetric_extruder_limit        = 0.00
-disable_inactive_e                       = true
-disable_inactive_x                       = true
-disable_inactive_y                       = true
-disable_inactive_z                       = true
+disable_idle_x                           = on
+disable_idle_y                           = on
+disable_idle_z                           = on
+disable_idle_e                           = on
 e0_auto_fan_pin                          = -1
 encoder_100x_steps_per_sec               = 80
 encoder_10x_steps_per_sec                = 30

Marlin/src/HAL/AVR/HAL.cpp

@@ -63,18 +63,23 @@ void save_reset_reason() {
 
 void MarlinHAL::init() {
   // Init Servo Pins
-  #define INIT_SERVO(N) OUT_WRITE(SERVO##N##_PIN, LOW)
   #if HAS_SERVO_0
-    INIT_SERVO(0);
+    OUT_WRITE(SERVO0_PIN, LOW);
   #endif
   #if HAS_SERVO_1
-    INIT_SERVO(1);
+    OUT_WRITE(SERVO1_PIN, LOW);
   #endif
   #if HAS_SERVO_2
-    INIT_SERVO(2);
+    OUT_WRITE(SERVO2_PIN, LOW);
   #endif
   #if HAS_SERVO_3
-    INIT_SERVO(3);
+    OUT_WRITE(SERVO3_PIN, LOW);
+  #endif
+  #if HAS_SERVO_4
+    OUT_WRITE(SERVO4_PIN, LOW);
+  #endif
+  #if HAS_SERVO_5
+    OUT_WRITE(SERVO5_PIN, LOW);
   #endif
 
   init_pwm_timers();   // Init user timers to default frequency - 1000HZ
@@ -145,12 +150,12 @@ void MarlinHAL::reboot() {
 // Free Memory Accessor
 // ------------------------
 
-#if ENABLED(SDSUPPORT)
+#if HAS_MEDIA
 
   #include "../../sd/SdFatUtil.h"
   int freeMemory() { return SdFatUtil::FreeRam(); }
 
-#else // !SDSUPPORT
+#else // !HAS_MEDIA
 
   extern "C" {
     extern char __bss_end;
@@ -167,6 +172,6 @@ void MarlinHAL::reboot() {
     }
   }
 
-#endif // !SDSUPPORT
+#endif // !HAS_MEDIA
 
 #endif // __AVR__

Marlin/src/HAL/AVR/HAL.h

@@ -1,7 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -140,14 +142,14 @@ typedef Servo hal_servo_t;
   #endif
   #define LCD_SERIAL lcdSerial
   #if HAS_DGUS_LCD
-    #define SERIAL_GET_TX_BUFFER_FREE() LCD_SERIAL.get_tx_buffer_free()
+    #define LCD_SERIAL_TX_BUFFER_FREE() LCD_SERIAL.get_tx_buffer_free()
   #endif
 #endif
 
 //
 // ADC
 //
-#define HAL_ADC_VREF        5.0
+#define HAL_ADC_VREF_MV   5000
 #define HAL_ADC_RESOLUTION  10
 
 //

Marlin/src/HAL/AVR/HAL_SPI.cpp

@@ -119,7 +119,6 @@ void spiBegin() {
     while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
   }
 
-
   /** begin spi transaction */
   void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
     // Based on Arduino SPI library
@@ -175,7 +174,6 @@ void spiBegin() {
     SPSR = clockDiv | 0x01;
   }
 
-
 #else // SOFTWARE_SPI || FORCE_SOFT_SPI
 
   // ------------------------
@@ -198,7 +196,7 @@ void spiBegin() {
     // output pin high - like sending 0xFF
     WRITE(SD_MOSI_PIN, HIGH);
 
-    LOOP_L_N(i, 8) {
+    for (uint8_t i = 0; i < 8; ++i) {
       WRITE(SD_SCK_PIN, HIGH);
 
       nop; // adjust so SCK is nice
@@ -225,7 +223,7 @@ void spiBegin() {
   void spiSend(uint8_t data) {
     // no interrupts during byte send - about 8µs
     cli();
-    LOOP_L_N(i, 8) {
+    for (uint8_t i = 0; i < 8; ++i) {
       WRITE(SD_SCK_PIN, LOW);
       WRITE(SD_MOSI_PIN, data & 0x80);
       data <<= 1;

Marlin/src/HAL/AVR/MarlinSerial.h

@@ -34,12 +34,9 @@
 #include <WString.h>
 
 #include "../../inc/MarlinConfigPre.h"
+#include "../../core/types.h"
 #include "../../core/serial_hook.h"
 
-#ifndef SERIAL_PORT
-  #define SERIAL_PORT 0
-#endif
-
 #ifndef USBCON
 
   // The presence of the UBRRH register is used to detect a UART.
@@ -138,10 +135,6 @@
 
   #define BYTE 0
 
-  // Templated type selector
-  template<bool b, typename T, typename F> struct TypeSelector { typedef T type;} ;
-  template<typename T, typename F> struct TypeSelector<false, T, F> { typedef F type; };
-
   template<typename Cfg>
   class MarlinSerial {
   protected:
@@ -164,7 +157,7 @@
     static constexpr B_U2Xx<Cfg::PORT>   B_U2X   = 0;
 
     // Base size of type on buffer size
-    typedef typename TypeSelector<(Cfg::RX_SIZE>256), uint16_t, uint8_t>::type ring_buffer_pos_t;
+    typedef uvalue_t(Cfg::RX_SIZE - 1) ring_buffer_pos_t;
 
     struct ring_buffer_r {
       volatile ring_buffer_pos_t head, tail;
@@ -283,7 +276,7 @@
     static constexpr bool DROPPED_RX        = false;
     static constexpr bool RX_FRAMING_ERRORS = false;
     static constexpr bool MAX_RX_QUEUED     = false;
-    static constexpr bool RX_OVERRUNS       = BOTH(HAS_DGUS_LCD, SERIAL_STATS_RX_BUFFER_OVERRUNS);
+    static constexpr bool RX_OVERRUNS       = ALL(HAS_DGUS_LCD, SERIAL_STATS_RX_BUFFER_OVERRUNS);
   };
 
   typedef Serial1Class< MarlinSerial< LCDSerialCfg<LCD_SERIAL_PORT> > > MSerialLCD;

Marlin/src/HAL/AVR/Servo.cpp

@@ -63,7 +63,6 @@
 
 static volatile int8_t Channel[_Nbr_16timers];              // counter for the servo being pulsed for each timer (or -1 if refresh interval)
 
-
 /************ static functions common to all instances ***********************/
 
 static inline void handle_interrupts(const timer16_Sequence_t timer, volatile uint16_t* TCNTn, volatile uint16_t* OCRnA) {

Marlin/src/HAL/AVR/eeprom.cpp

@@ -23,7 +23,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if EITHER(EEPROM_SETTINGS, SD_FIRMWARE_UPDATE)
+#if ANY(EEPROM_SETTINGS, SD_FIRMWARE_UPDATE)
 
 /**
  * PersistentStore for Arduino-style EEPROM interface

Marlin/src/HAL/AVR/endstop_interrupts.h

@@ -91,7 +91,6 @@ void endstop_ISR() { endstops.update(); }
 
 #endif
 
-
 // Install Pin change interrupt for a pin. Can be called multiple times.
 void pciSetup(const int8_t pin) {
   if (digitalPinHasPCICR(pin)) {
@@ -120,7 +119,7 @@ void pciSetup(const int8_t pin) {
 
 void setup_endstop_interrupts() {
   #define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
-  #if HAS_X_MAX
+  #if USE_X_MAX
     #if (digitalPinToInterrupt(X_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(X_MAX_PIN);
     #else
@@ -128,7 +127,7 @@ void setup_endstop_interrupts() {
       pciSetup(X_MAX_PIN);
     #endif
   #endif
-  #if HAS_X_MIN
+  #if USE_X_MIN
     #if (digitalPinToInterrupt(X_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(X_MIN_PIN);
     #else
@@ -136,7 +135,7 @@ void setup_endstop_interrupts() {
       pciSetup(X_MIN_PIN);
     #endif
   #endif
-  #if HAS_Y_MAX
+  #if USE_Y_MAX
     #if (digitalPinToInterrupt(Y_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Y_MAX_PIN);
     #else
@@ -144,7 +143,7 @@ void setup_endstop_interrupts() {
       pciSetup(Y_MAX_PIN);
     #endif
   #endif
-  #if HAS_Y_MIN
+  #if USE_Y_MIN
     #if (digitalPinToInterrupt(Y_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Y_MIN_PIN);
     #else
@@ -152,7 +151,7 @@ void setup_endstop_interrupts() {
       pciSetup(Y_MIN_PIN);
     #endif
   #endif
-  #if HAS_Z_MAX
+  #if USE_Z_MAX
     #if (digitalPinToInterrupt(Z_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z_MAX_PIN);
     #else
@@ -160,7 +159,7 @@ void setup_endstop_interrupts() {
       pciSetup(Z_MAX_PIN);
     #endif
   #endif
-  #if HAS_Z_MIN
+  #if USE_Z_MIN
     #if (digitalPinToInterrupt(Z_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z_MIN_PIN);
     #else
@@ -168,97 +167,97 @@ void setup_endstop_interrupts() {
       pciSetup(Z_MIN_PIN);
     #endif
   #endif
-  #if HAS_I_MAX
+  #if USE_I_MAX
     #if (digitalPinToInterrupt(I_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(I_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(I_MAX_PIN), "I_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(I_MAX_PIN), "I_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(I_MAX_PIN);
     #endif
-  #elif HAS_I_MIN
+  #elif USE_I_MIN
     #if (digitalPinToInterrupt(I_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(I_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(I_MIN_PIN), "I_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(I_MIN_PIN), "I_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(I_MIN_PIN);
     #endif
   #endif
-  #if HAS_J_MAX
+  #if USE_J_MAX
     #if (digitalPinToInterrupt(J_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(J_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(J_MAX_PIN), "J_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(J_MAX_PIN), "J_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(J_MAX_PIN);
     #endif
-  #elif HAS_J_MIN
+  #elif USE_J_MIN
     #if (digitalPinToInterrupt(J_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(J_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(J_MIN_PIN), "J_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(J_MIN_PIN), "J_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(J_MIN_PIN);
     #endif
   #endif
-  #if HAS_K_MAX
+  #if USE_K_MAX
     #if (digitalPinToInterrupt(K_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(K_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(K_MAX_PIN), "K_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(K_MAX_PIN), "K_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(K_MAX_PIN);
     #endif
-  #elif HAS_K_MIN
+  #elif USE_K_MIN
     #if (digitalPinToInterrupt(K_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(K_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(K_MIN_PIN), "K_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(K_MIN_PIN), "K_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(K_MIN_PIN);
     #endif
   #endif
-  #if HAS_U_MAX
+  #if USE_U_MAX
     #if (digitalPinToInterrupt(U_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(U_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(U_MAX_PIN), "U_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(U_MAX_PIN), "U_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(U_MAX_PIN);
     #endif
-  #elif HAS_U_MIN
+  #elif USE_U_MIN
     #if (digitalPinToInterrupt(U_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(U_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(U_MIN_PIN), "U_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(U_MIN_PIN), "U_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(U_MIN_PIN);
     #endif
   #endif
-  #if HAS_V_MAX
+  #if USE_V_MAX
     #if (digitalPinToInterrupt(V_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(V_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(V_MAX_PIN), "V_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(V_MAX_PIN), "V_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(V_MAX_PIN);
     #endif
-  #elif HAS_V_MIN
+  #elif USE_V_MIN
     #if (digitalPinToInterrupt(V_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(V_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(V_MIN_PIN), "V_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(V_MIN_PIN), "V_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(V_MIN_PIN);
     #endif
   #endif
-  #if HAS_W_MAX
+  #if USE_W_MAX
     #if (digitalPinToInterrupt(W_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(W_MAX_PIN);
     #else
-      static_assert(digitalPinHasPCICR(W_MAX_PIN), "W_MAX_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(W_MAX_PIN), "W_MAX_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(W_MAX_PIN);
     #endif
-  #elif HAS_W_MIN
+  #elif USE_W_MIN
     #if (digitalPinToInterrupt(W_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(W_MIN_PIN);
     #else
-      static_assert(digitalPinHasPCICR(W_MIN_PIN), "W_MIN_PIN is not interrupt-capable");
+      static_assert(digitalPinHasPCICR(W_MIN_PIN), "W_MIN_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
       pciSetup(W_MIN_PIN);
     #endif
   #endif
-  #if HAS_X2_MAX
+  #if USE_X2_MAX
     #if (digitalPinToInterrupt(X2_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(X2_MAX_PIN);
     #else
@@ -266,7 +265,7 @@ void setup_endstop_interrupts() {
       pciSetup(X2_MAX_PIN);
     #endif
   #endif
-  #if HAS_X2_MIN
+  #if USE_X2_MIN
     #if (digitalPinToInterrupt(X2_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(X2_MIN_PIN);
     #else
@@ -274,7 +273,7 @@ void setup_endstop_interrupts() {
       pciSetup(X2_MIN_PIN);
     #endif
   #endif
-  #if HAS_Y2_MAX
+  #if USE_Y2_MAX
     #if (digitalPinToInterrupt(Y2_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Y2_MAX_PIN);
     #else
@@ -282,7 +281,7 @@ void setup_endstop_interrupts() {
       pciSetup(Y2_MAX_PIN);
     #endif
   #endif
-  #if HAS_Y2_MIN
+  #if USE_Y2_MIN
     #if (digitalPinToInterrupt(Y2_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Y2_MIN_PIN);
     #else
@@ -290,7 +289,7 @@ void setup_endstop_interrupts() {
       pciSetup(Y2_MIN_PIN);
     #endif
   #endif
-  #if HAS_Z2_MAX
+  #if USE_Z2_MAX
     #if (digitalPinToInterrupt(Z2_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z2_MAX_PIN);
     #else
@@ -298,7 +297,7 @@ void setup_endstop_interrupts() {
       pciSetup(Z2_MAX_PIN);
     #endif
   #endif
-  #if HAS_Z2_MIN
+  #if USE_Z2_MIN
     #if (digitalPinToInterrupt(Z2_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z2_MIN_PIN);
     #else
@@ -306,7 +305,7 @@ void setup_endstop_interrupts() {
       pciSetup(Z2_MIN_PIN);
     #endif
   #endif
-  #if HAS_Z3_MAX
+  #if USE_Z3_MAX
     #if (digitalPinToInterrupt(Z3_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z3_MAX_PIN);
     #else
@@ -314,7 +313,7 @@ void setup_endstop_interrupts() {
       pciSetup(Z3_MAX_PIN);
     #endif
   #endif
-  #if HAS_Z3_MIN
+  #if USE_Z3_MIN
     #if (digitalPinToInterrupt(Z3_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z3_MIN_PIN);
     #else
@@ -322,7 +321,7 @@ void setup_endstop_interrupts() {
       pciSetup(Z3_MIN_PIN);
     #endif
   #endif
-  #if HAS_Z4_MAX
+  #if USE_Z4_MAX
     #if (digitalPinToInterrupt(Z4_MAX_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z4_MAX_PIN);
     #else
@@ -330,7 +329,7 @@ void setup_endstop_interrupts() {
       pciSetup(Z4_MAX_PIN);
     #endif
   #endif
-  #if HAS_Z4_MIN
+  #if USE_Z4_MIN
     #if (digitalPinToInterrupt(Z4_MIN_PIN) != NOT_AN_INTERRUPT)
       _ATTACH(Z4_MIN_PIN);
     #else

Marlin/src/HAL/AVR/fast_pwm.cpp

@@ -23,6 +23,10 @@
 
 #include "../../inc/MarlinConfig.h"
 
+//#define DEBUG_AVR_FAST_PWM
+#define DEBUG_OUT ENABLED(DEBUG_AVR_FAST_PWM)
+#include "../../core/debug_out.h"
+
 struct Timer {
   volatile uint8_t* TCCRnQ[3];  // max 3 TCCR registers per timer
   volatile uint16_t* OCRnQ[3];  // max 3 OCR registers per timer
@@ -108,12 +112,15 @@ const Timer get_pwm_timer(const pin_t pin) {
 }
 
 void MarlinHAL::set_pwm_frequency(const pin_t pin, const uint16_t f_desired) {
+  DEBUG_ECHOLNPGM("set_pwm_frequency(pin=", pin, ", freq=", f_desired, ")");
   const Timer timer = get_pwm_timer(pin);
   if (timer.isProtected || !timer.isPWM) return; // Don't proceed if protected timer or not recognized
 
   const bool is_timer2 = timer.n == 2;
   const uint16_t maxtop = is_timer2 ? 0xFF : 0xFFFF;
 
+  DEBUG_ECHOLNPGM("maxtop=", maxtop);
+
   uint16_t res = 0xFF;        // resolution (TOP value)
   uint8_t j = CS_NONE;        // prescaler index
   uint8_t wgm = WGM_PWM_PC_8; // waveform generation mode
@@ -121,23 +128,29 @@ void MarlinHAL::set_pwm_frequency(const pin_t pin, const uint16_t f_desired) {
   // Calculating the prescaler and resolution to use to achieve closest frequency
   if (f_desired != 0) {
     constexpr uint16_t prescaler[] = { 1, 8, (32), 64, (128), 256, 1024 };  // (*) are Timer 2 only
-    uint16_t f = (F_CPU) / (2 * 1024 * maxtop) + 1;           // Start with the lowest non-zero frequency achievable (1 or 31)
+    uint16_t f = (F_CPU) / (uint32_t(maxtop) << 11) + 1;      // Start with the lowest non-zero frequency achievable (for 16MHz, 1 or 31)
 
-    LOOP_L_N(i, COUNT(prescaler)) {                           // Loop through all prescaler values
-      const uint16_t p = prescaler[i];
+    DEBUG_ECHOLNPGM("f=", f);
+    DEBUG_ECHOLNPGM("(prescaler loop)");
+    for (uint8_t i = 0; i < COUNT(prescaler); ++i) {          // Loop through all prescaler values
+      const uint32_t p = prescaler[i];                        // Extend to 32 bits for calculations
+      DEBUG_ECHOLNPGM("prescaler[", i, "]=", p);
       uint16_t res_fast_temp, res_pc_temp;
       if (is_timer2) {
         #if ENABLED(USE_OCR2A_AS_TOP)                         // No resolution calculation for TIMER2 unless enabled USE_OCR2A_AS_TOP
           const uint16_t rft = (F_CPU) / (p * f_desired);
           res_fast_temp = rft - 1;
           res_pc_temp = rft / 2;
+          DEBUG_ECHOLNPGM("(Timer2) res_fast_temp=", res_fast_temp, " res_pc_temp=", res_pc_temp);
         #else
           res_fast_temp = res_pc_temp = maxtop;
+          DEBUG_ECHOLNPGM("(Timer2) res_fast_temp=", maxtop, " res_pc_temp=", maxtop);
         #endif
       }
       else {
         if (p == 32 || p == 128) continue;                    // Skip TIMER2 specific prescalers when not TIMER2
         const uint16_t rft = (F_CPU) / (p * f_desired);
+        DEBUG_ECHOLNPGM("(Not Timer 2) F_CPU=", STRINGIFY(F_CPU), " prescaler=", p, " f_desired=", f_desired);
         res_fast_temp = rft - 1;
         res_pc_temp = rft / 2;
       }
@@ -147,23 +160,27 @@ void MarlinHAL::set_pwm_frequency(const pin_t pin, const uint16_t f_desired) {
 
       // Calculate frequencies of test prescaler and resolution values
       const uint16_t f_fast_temp = (F_CPU) / (p * (1 + res_fast_temp)),
-                     f_pc_temp   = (F_CPU) / (2 * p * res_pc_temp);
-      const int      f_diff      = _MAX(f, f_desired) - _MIN(f, f_desired),
+                     f_pc_temp   = (F_CPU) / ((p * res_pc_temp) << 1),
+                     f_diff      = _MAX(f, f_desired) - _MIN(f, f_desired),
                      f_fast_diff = _MAX(f_fast_temp, f_desired) - _MIN(f_fast_temp, f_desired),
                      f_pc_diff   = _MAX(f_pc_temp, f_desired) - _MIN(f_pc_temp, f_desired);
 
+      DEBUG_ECHOLNPGM("f_fast_temp=", f_fast_temp, " f_pc_temp=", f_pc_temp, " f_diff=", f_diff, " f_fast_diff=", f_fast_diff, " f_pc_diff=", f_pc_diff);
+
       if (f_fast_diff < f_diff && f_fast_diff <= f_pc_diff) { // FAST values are closest to desired f
         // Set the Wave Generation Mode to FAST PWM
         wgm = is_timer2 ? uint8_t(TERN(USE_OCR2A_AS_TOP, WGM2_FAST_PWM_OCR2A, WGM2_FAST_PWM)) : uint8_t(WGM_FAST_PWM_ICRn);
         // Remember this combination
         f = f_fast_temp; res = res_fast_temp; j = i + 1;
+        DEBUG_ECHOLNPGM("(FAST) updated f=", f);
       }
       else if (f_pc_diff < f_diff) {                          // PHASE CORRECT values are closes to desired f
         // Set the Wave Generation Mode to PWM PHASE CORRECT
         wgm = is_timer2 ? uint8_t(TERN(USE_OCR2A_AS_TOP, WGM2_PWM_PC_OCR2A, WGM2_PWM_PC)) : uint8_t(WGM_PWM_PC_ICRn);
         f = f_pc_temp; res = res_pc_temp; j = i + 1;
+        DEBUG_ECHOLNPGM("(PHASE) updated f=", f);
       }
-    }
+    } // prescaler loop
   }
 
   _SET_WGMnQ(timer, wgm);
@@ -215,7 +232,7 @@ void MarlinHAL::init_pwm_timers() {
     #endif
   };
 
-  LOOP_L_N(i, COUNT(pwm_pin))
+  for (uint8_t i = 0; i < COUNT(pwm_pin); ++i)
     set_pwm_frequency(pwm_pin[i], 1000);
 }
 

Marlin/src/HAL/AVR/fastio.h

@@ -255,84 +255,6 @@ enum ClockSource2 : uint8_t {
 #define SET_FOCB(T,V) SET_FOC(T,B,V)
 #define SET_FOCC(T,V) SET_FOC(T,C,V)
 
-#if 0
-
-/**
- * PWM availability macros
- */
-
-// Determine which hardware PWMs are already in use
-#define _PWM_CHK_FAN_B(P) (P == E0_AUTO_FAN_PIN || P == E1_AUTO_FAN_PIN || P == E2_AUTO_FAN_PIN || P == E3_AUTO_FAN_PIN || P == E4_AUTO_FAN_PIN || P == E5_AUTO_FAN_PIN || P == E6_AUTO_FAN_PIN || P == E7_AUTO_FAN_PIN || P == CHAMBER_AUTO_FAN_PIN || P == COOLER_AUTO_FAN_PIN)
-#if PIN_EXISTS(CONTROLLER_FAN)
-  #define PWM_CHK_FAN_B(P) (_PWM_CHK_FAN_B(P) || P == CONTROLLER_FAN_PIN)
-#else
-  #define PWM_CHK_FAN_B(P) _PWM_CHK_FAN_B(P)
-#endif
-
-#if ANY_PIN(FAN, FAN1, FAN2, FAN3, FAN4, FAN5, FAN6, FAN7)
-  #if PIN_EXISTS(FAN7)
-    #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN || P == FAN4_PIN || P == FAN5_PIN || P == FAN6_PIN || P == FAN7_PIN)
-  #elif PIN_EXISTS(FAN6)
-    #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN || P == FAN4_PIN || P == FAN5_PIN || P == FAN6_PIN)
-  #elif PIN_EXISTS(FAN5)
-    #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN || P == FAN4_PIN || P == FAN5_PIN)
-  #elif PIN_EXISTS(FAN4)
-    #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN || P == FAN4_PIN)
-  #elif PIN_EXISTS(FAN3)
-    #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN)
-  #elif PIN_EXISTS(FAN2)
-    #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN)
-  #elif PIN_EXISTS(FAN1)
-    #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN)
-  #else
-    #define PWM_CHK_FAN_A(P) (P == FAN0_PIN)
-  #endif
-#else
-  #define PWM_CHK_FAN_A(P) false
-#endif
-
-#if HAS_MOTOR_CURRENT_PWM
-  #if PIN_EXISTS(MOTOR_CURRENT_PWM_XY)
-    #define PWM_CHK_MOTOR_CURRENT(P) (P == MOTOR_CURRENT_PWM_E || P == MOTOR_CURRENT_PWM_E0  || P == MOTOR_CURRENT_PWM_E1 || P == MOTOR_CURRENT_PWM_Z || P == MOTOR_CURRENT_PWM_XY)
-  #elif PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
-    #define PWM_CHK_MOTOR_CURRENT(P) (P == MOTOR_CURRENT_PWM_E || P == MOTOR_CURRENT_PWM_E0  || P == MOTOR_CURRENT_PWM_E1 || P == MOTOR_CURRENT_PWM_Z)
-  #else
-    #define PWM_CHK_MOTOR_CURRENT(P) (P == MOTOR_CURRENT_PWM_E || P == MOTOR_CURRENT_PWM_E0  || P == MOTOR_CURRENT_PWM_E1)
-  #endif
-#else
-  #define PWM_CHK_MOTOR_CURRENT(P) false
-#endif
-
-#ifdef NUM_SERVOS
-  #if AVR_ATmega2560_FAMILY
-    #define PWM_CHK_SERVO(P) (P == 5 || (NUM_SERVOS > 12 && P == 6) || (NUM_SERVOS > 24 && P == 46))  // PWMS 3A, 4A & 5A
-  #elif AVR_ATmega2561_FAMILY
-    #define PWM_CHK_SERVO(P)   (P == 5)  // PWM3A
-  #elif AVR_ATmega1284_FAMILY
-    #define PWM_CHK_SERVO(P)   false
-  #elif AVR_AT90USB1286_FAMILY
-    #define PWM_CHK_SERVO(P)   (P == 16) // PWM3A
-  #elif AVR_ATmega328_FAMILY
-    #define PWM_CHK_SERVO(P)   false
-  #endif
-#else
-  #define PWM_CHK_SERVO(P) false
-#endif
-
-#if ENABLED(BARICUDA)
-  #if HAS_HEATER_1 && HAS_HEATER_2
-    #define PWM_CHK_HEATER(P) (P == HEATER_1_PIN || P == HEATER_2_PIN)
-  #elif HAS_HEATER_1
-    #define PWM_CHK_HEATER(P) (P == HEATER_1_PIN)
-  #endif
-#else
-    #define PWM_CHK_HEATER(P) false
-#endif
-
-#define PWM_CHK(P) (PWM_CHK_HEATER(P) || PWM_CHK_SERVO(P) || PWM_CHK_MOTOR_CURRENT(P) || PWM_CHK_FAN_A(P) || PWM_CHK_FAN_B(P))
-
-#endif // PWM_CHK is not used in Marlin
-
 // define which hardware PWMs are available for the current CPU
 // all timer 1 PWMS deleted from this list because they are never available
 #if AVR_ATmega2560_FAMILY

Marlin/src/HAL/AVR/fastio/fastio_1280.h

@@ -27,43 +27,41 @@
  *   Hardware Pin  : 02 03 06 07 01 05 15 16 17 18 23 24 25 26 64 63 13 12 46 45 44 43 78 77 76 75 74 73 72 71 60 59 58 57 56 55 54 53 50 70 52 51 42 41 40 39 38 37 36 35 22 21 20 19 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 | 04 08 09 10 11 14 27 28 29 30 31 32 33 34 47 48 49 61 62 65 66 67 68 69 79 80 81 98 99 100
  *   Port          : E0 E1 E4 E5 G5 E3 H3 H4 H5 H6 B4 B5 B6 B7 J1 J0 H1 H0 D3 D2 D1 D0 A0 A1 A2 A3 A4 A5 A6 A7 C7 C6 C5 C4 C3 C2 C1 C0 D7 G2 G1 G0 L7 L6 L5 L4 L3 L2 L1 L0 B3 B2 B1 B0 F0 F1 F2 F3 F4 F5 F6 F7 K0 K1 K2 K3 K4 K5 K6 K7 | E2 E6 E7 xx xx H2 H7 G3 G4 xx xx xx xx xx D4 D5 D6 xx xx J2 J3 J4 J5 J6 J7 xx xx xx xx xx
  *   Logical Pin   : 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 | 78 79 80 xx xx 84 85 71 70 xx xx xx xx xx 81 82 83 xx xx 72 73 75 76 77 74 xx xx xx xx xx
+ *   Analog Input  :                                                                                                                                                                    0  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15
  */
 
 #include "../fastio.h"
 
-// change for your board
-#define DEBUG_LED   DIO21
-
 // UART
-#define RXD         DIO0
-#define TXD         DIO1
+#define RXD         0
+#define TXD         1
 
 // SPI
-#define SCK         DIO52
-#define MISO        DIO50
-#define MOSI        DIO51
-#define SS          DIO53
+#define MISO        50
+#define MOSI        51
+#define SCK         52
+#define SS          53
 
 // TWI (I2C)
-#define SCL         DIO21
-#define SDA         DIO20
+#define SCL         21
+#define SDA         20
 
 // Timers and PWM
-#define OC0A        DIO13
-#define OC0B        DIO4
-#define OC1A        DIO11
-#define OC1B        DIO12
-#define OC2A        DIO10
-#define OC2B        DIO9
-#define OC3A        DIO5
-#define OC3B        DIO2
-#define OC3C        DIO3
-#define OC4A        DIO6
-#define OC4B        DIO7
-#define OC4C        DIO8
-#define OC5A        DIO46
-#define OC5B        DIO45
-#define OC5C        DIO44
+#define OC0A        13
+#define OC0B        4
+#define OC1A        11
+#define OC1B        12
+#define OC2A        10
+#define OC2B        9
+#define OC3A        5
+#define OC3B        2
+#define OC3C        3
+#define OC4A        6
+#define OC4B        7
+#define OC4C        8
+#define OC5A        46
+#define OC5B        45
+#define OC5C        44
 
 // Digital I/O
 

Marlin/src/HAL/AVR/fastio/fastio_1281.h

@@ -30,32 +30,29 @@
 
 #include "../fastio.h"
 
-// change for your board
-#define DEBUG_LED   DIO46
-
 // UART
-#define RXD         DIO0
-#define TXD         DIO1
+#define RXD         0
+#define TXD         1
 
 // SPI
-#define SCK         DIO10
-#define MISO        DIO12
-#define MOSI        DIO11
-#define SS          DIO16
+#define SCK         10
+#define MISO        12
+#define MOSI        11
+#define SS          16
 
 // TWI (I2C)
-#define SCL         DIO17
-#define SDA         DIO18
+#define SCL         17
+#define SDA         18
 
 // Timers and PWM
-#define OC0A        DIO9
-#define OC0B        DIO4
-#define OC1A        DIO7
-#define OC1B        DIO8
-#define OC2A        DIO6
-#define OC3A        DIO5
-#define OC3B        DIO2
-#define OC3C        DIO3
+#define OC0A        9
+#define OC0B        4
+#define OC1A        7
+#define OC1B        8
+#define OC2A        6
+#define OC3A        5
+#define OC3B        2
+#define OC3C        3
 
 // Digital I/O
 

Marlin/src/HAL/AVR/fastio/fastio_168.h

@@ -30,29 +30,27 @@
 
 #include "../fastio.h"
 
-#define DEBUG_LED   AIO5
-
 // UART
-#define RXD         DIO0
-#define TXD         DIO1
+#define RXD         0
+#define TXD         1
 
 // SPI
-#define SCK         DIO13
-#define MISO        DIO12
-#define MOSI        DIO11
-#define SS          DIO10
+#define SS          10
+#define MOSI        11
+#define MISO        12
+#define SCK         13
 
 // TWI (I2C)
 #define SCL         AIO5
 #define SDA         AIO4
 
 // Timers and PWM
-#define OC0A        DIO6
-#define OC0B        DIO5
-#define OC1A        DIO9
-#define OC1B        DIO10
-#define OC2A        DIO11
-#define OC2B        DIO3
+#define OC0A        6
+#define OC0B        5
+#define OC1A        9
+#define OC1B        10
+#define OC2A        11
+#define OC2B        3
 
 // Digital I/O
 

Marlin/src/HAL/AVR/fastio/fastio_644.h

@@ -56,34 +56,32 @@
 
 #include "../fastio.h"
 
-#define DEBUG_LED   DIO0
-
 // UART
-#define RXD         DIO8
-#define TXD         DIO9
-#define RXD0        DIO8
-#define TXD0        DIO9
+#define RXD         8
+#define TXD         9
+#define RXD0        8
+#define TXD0        9
 
-#define RXD1        DIO10
-#define TXD1        DIO11
+#define RXD1        10
+#define TXD1        11
 
 // SPI
-#define SCK         DIO7
-#define MISO        DIO6
-#define MOSI        DIO5
-#define SS          DIO4
+#define SS          4
+#define MOSI        5
+#define MISO        6
+#define SCK         7
 
 // TWI (I2C)
-#define SCL         DIO16
-#define SDA         DIO17
+#define SCL         16
+#define SDA         17
 
 // Timers and PWM
-#define OC0A        DIO3
-#define OC0B        DIO4
-#define OC1A        DIO13
-#define OC1B        DIO12
-#define OC2A        DIO15
-#define OC2B        DIO14
+#define OC0A        3
+#define OC0B        4
+#define OC1A        13
+#define OC1B        12
+#define OC2A        15
+#define OC2B        14
 
 // Digital I/O
 

Marlin/src/HAL/AVR/fastio/fastio_AT90USB.h

@@ -26,19 +26,16 @@
  *
  *   Logical Pin: 28 29 30 31 32 33 34 35 20 21 22 23 24 25 26 27 10 11 12 13 14 15 16 17 00 01 02 03 04 05 06 07 08 09(46*47)36 37 18 19 38 39 40 41 42 43 44 45
  *   Port:        A0 A1 A2 A3 A4 A5 A6 A7 B0 B1 B2 B3 B4 B5 B6 B7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 E0 E1 E2 E3 E4 E5 E6 E7 F0 F1 F2 F3 F4 F5 F6 F7
- *            The logical pins 46 and 47 are not supported by Teensyduino, but are supported below as E2 and E3
+ *            Logical pins 46-47 aren't supported by Teensyduino, but are supported below as E2 and E3
  */
 
 #include "../fastio.h"
 
-// change for your board
-#define DEBUG_LED   DIO31 /* led D5 red */
-
 // SPI
-#define SCK         DIO21  //  9
-#define MISO        DIO23  // 11
-#define MOSI        DIO22  // 10
-#define SS          DIO20  //  8
+#define SS          20  //  8
+#define SCK         21  //  9
+#define MOSI        22  // 10
+#define MISO        23  // 11
 
 // Digital I/O
 
@@ -679,7 +676,6 @@
 #define PF7_PWM     0
 #define PF7_DDR     DDRF
 
-
 /**
  * Some of the pin mapping functions of the Teensduino extension to the Arduino IDE
  * do not function the same as the other Arduino extensions.

Marlin/src/HAL/AVR/inc/Conditionals_LCD.h

@@ -21,6 +21,6 @@
  */
 #pragma once
 
-#if HAS_SPI_TFT || HAS_FSMC_TFT
-  #error "Sorry! TFT displays are not available for HAL/AVR."
+#ifndef SERIAL_PORT
+  #define SERIAL_PORT 0
 #endif

Marlin/src/HAL/AVR/inc/SanityCheck.h

@@ -25,6 +25,10 @@
  * Test AVR-specific configuration values for errors at compile-time.
  */
 
+#if HAS_SPI_TFT || HAS_FSMC_TFT
+  #error "Sorry! TFT displays are not available for HAL/AVR."
+#endif
+
 /**
  * Check for common serial pin conflicts
  */
@@ -35,7 +39,7 @@
   || X_STEP_PIN == N || Y_STEP_PIN == N || Z_STEP_PIN  == N \
   || X_DIR_PIN  == N || Y_DIR_PIN  == N || Z_DIR_PIN   == N \
   || X_ENA_PIN  == N || Y_ENA_PIN  == N || Z_ENA_PIN   == N \
-  || BTN_EN1    == N || BTN_EN2    == N \
+  || BTN_EN1    == N || BTN_EN2    == N || LCD_PINS_EN == N \
 )
 #if SERIAL_IN_USE(0)
   // D0-D1. No known conflicts.
@@ -69,8 +73,8 @@
 /**
  * Checks for SOFT PWM
  */
-#if HAS_FAN0 && FAN_PIN == 9 && DISABLED(FAN_SOFT_PWM) && ENABLED(SPEAKER)
-  #error "FAN_PIN 9 Hardware PWM uses Timer 2 which conflicts with Arduino AVR Tone Timer (for SPEAKER)."
+#if HAS_FAN0 && FAN0_PIN == 9 && DISABLED(FAN_SOFT_PWM) && ENABLED(SPEAKER)
+  #error "FAN0_PIN 9 Hardware PWM uses Timer 2 which conflicts with Arduino AVR Tone Timer (for SPEAKER)."
   #error "Disable SPEAKER or enable FAN_SOFT_PWM."
 #endif
 
@@ -91,11 +95,11 @@
 /**
  * The Trinamic library includes SoftwareSerial.h, leading to a compile error.
  */
-#if BOTH(HAS_TRINAMIC_CONFIG, ENDSTOP_INTERRUPTS_FEATURE)
+#if ALL(HAS_TRINAMIC_CONFIG, ENDSTOP_INTERRUPTS_FEATURE)
   #error "TMCStepper includes SoftwareSerial.h which is incompatible with ENDSTOP_INTERRUPTS_FEATURE. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
 #endif
 
-#if BOTH(HAS_TMC_SW_SERIAL, MONITOR_DRIVER_STATUS)
+#if ALL(HAS_TMC_SW_SERIAL, MONITOR_DRIVER_STATUS)
   #error "MONITOR_DRIVER_STATUS causes performance issues when used with SoftwareSerial-connected drivers. Disable MONITOR_DRIVER_STATUS or use hardware serial to continue."
 #endif
 

Marlin/src/HAL/AVR/math.h

@@ -27,13 +27,14 @@
 
 // intRes = longIn1 * longIn2 >> 24
 // uses:
-// A[tmp] to store 0
-// B[tmp] to store bits 16-23 of the 48bit result. The top bit is used to round the two byte result.
-// note that the lower two bytes and the upper byte of the 48bit result are not calculated.
-// this can cause the result to be out by one as the lower bytes may cause carries into the upper ones.
-// B A are bits 24-39 and are the returned value
-// C B A is longIn1
-// D C B A is longIn2
+// r1, r0 for the result of mul.
+// [tmp1] to store 0.
+// [tmp2] to store bits 16-23 of the 56 bit result. The top bit of [tmp2] is used for rounding.
+// Note that the lower two bytes and the upper two bytes of the 56 bit result are not calculated.
+// This can cause the result to be out by one as the lower bytes may cause carries into the upper ones.
+// [intRes] (A B) is bits 24-39 and is the returned value.
+// [longIn1] (C B A) is a 24 bit parameter.
+// [longIn2] (D C B A) is a 32 bit parameter.
 //
 FORCE_INLINE static uint16_t MultiU24X32toH16(uint32_t longIn1, uint32_t longIn2) {
   uint8_t tmp1;
@@ -66,11 +67,9 @@ FORCE_INLINE static uint16_t MultiU24X32toH16(uint32_t longIn1, uint32_t longIn2
     A("add %[tmp2], r1")
     A("adc %A[intRes], %[tmp1]")
     A("adc %B[intRes], %[tmp1]")
-    A("lsr %[tmp2]")
-    A("adc %A[intRes], %[tmp1]")
-    A("adc %B[intRes], %[tmp1]")
     A("mul %D[longIn2], %A[longIn1]")
-    A("add %A[intRes], r0")
+    A("lsl %[tmp2]")
+    A("adc %A[intRes], r0")
     A("adc %B[intRes], r1")
     A("mul %D[longIn2], %B[longIn1]")
     A("add %B[intRes], r0")
@@ -85,11 +84,16 @@ FORCE_INLINE static uint16_t MultiU24X32toH16(uint32_t longIn1, uint32_t longIn2
   return intRes;
 }
 
-// intRes = intIn1 * intIn2 >> 16
+// intRes = intIn1 * intIn2 >> 8
 // uses:
-// r26 to store 0
-// r27 to store the byte 1 of the 24 bit result
-FORCE_INLINE static uint16_t MultiU16X8toH16(uint8_t charIn1, uint16_t intIn2) {
+// r1, r0 for the result of mul. After the second mul, r0 holds bits 0-7 of the 24 bit result and
+// the top bit of r0 is used for rounding.
+// [tmp] to store 0.
+// [intRes] (A B) is bits 8-15 and is the returned value.
+// [charIn1] is an 8 bit parameter.
+// [intIn2] (B A) is a 16 bit parameter.
+//
+FORCE_INLINE static uint16_t MultiU8X16toH16(uint8_t charIn1, uint16_t intIn2) {
   uint8_t tmp;
   uint16_t intRes;
   __asm__ __volatile__ (
@@ -97,10 +101,8 @@ FORCE_INLINE static uint16_t MultiU16X8toH16(uint8_t charIn1, uint16_t intIn2) {
     A("mul %[charIn1], %B[intIn2]")
     A("movw %A[intRes], r0")
     A("mul %[charIn1], %A[intIn2]")
-    A("add %A[intRes], r1")
-    A("adc %B[intRes], %[tmp]")
-    A("lsr r0")
-    A("adc %A[intRes], %[tmp]")
+    A("lsl r0")
+    A("adc %A[intRes], r1")
     A("adc %B[intRes], %[tmp]")
     A("clr r1")
       : [intRes] "=&r" (intRes),

Marlin/src/HAL/AVR/pinsDebug.h

@@ -22,7 +22,23 @@
 #pragma once
 
 /**
- * PWM print routines for Atmel 8 bit AVR CPUs
+ * Pins Debugging for Atmel 8 bit AVR CPUs
+ *
+ *   - NUMBER_PINS_TOTAL
+ *   - MULTI_NAME_PAD
+ *   - getPinByIndex(index)
+ *   - printPinNameByIndex(index)
+ *   - getPinIsDigitalByIndex(index)
+ *   - digitalPinToAnalogIndex(pin)
+ *   - getValidPinMode(pin)
+ *   - isValidPin(pin)
+ *   - isAnalogPin(pin)
+ *   - digitalRead_mod(pin)
+ *   - pwm_status(pin)
+ *   - printPinPWM(pin)
+ *   - printPinPort(pin)
+ *   - printPinNumber(pin)
+ *   - printPinAnalog(pin)
  */
 
 #include "../../inc/MarlinConfig.h"
@@ -39,55 +55,56 @@
   #include "pinsDebug_Teensyduino.h"
   // Can't use the "digitalPinToPort" function from the Teensyduino type IDEs
   // portModeRegister takes a different argument
-  #define digitalPinToTimer_DEBUG(p) digitalPinToTimer(p)
-  #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask(p)
-  #define digitalPinToPort_DEBUG(p) digitalPinToPort(p)
-  #define GET_PINMODE(pin) (*portModeRegister(pin) & digitalPinToBitMask_DEBUG(pin))
+  #define digitalPinToTimer_DEBUG(P) digitalPinToTimer(P)
+  #define digitalPinToBitMask_DEBUG(P) digitalPinToBitMask(P)
+  #define digitalPinToPort_DEBUG(P) digitalPinToPort(P)
+  #define getValidPinMode(P) (*portModeRegister(P) & digitalPinToBitMask_DEBUG(P))
 
 #elif AVR_ATmega2560_FAMILY_PLUS_70   // So we can access/display all the pins on boards using more than 70
 
   #include "pinsDebug_plus_70.h"
-  #define digitalPinToTimer_DEBUG(p) digitalPinToTimer_plus_70(p)
-  #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask_plus_70(p)
-  #define digitalPinToPort_DEBUG(p) digitalPinToPort_plus_70(p)
-  bool GET_PINMODE(int8_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); }
+  #define digitalPinToTimer_DEBUG(P) digitalPinToTimer_plus_70(P)
+  #define digitalPinToBitMask_DEBUG(P) digitalPinToBitMask_plus_70(P)
+  #define digitalPinToPort_DEBUG(P) digitalPinToPort_plus_70(P)
+  bool getValidPinMode(pin_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); }
 
 #else
 
-  #define digitalPinToTimer_DEBUG(p) digitalPinToTimer(p)
-  #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask(p)
-  #define digitalPinToPort_DEBUG(p) digitalPinToPort(p)
-  bool GET_PINMODE(int8_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); }
-  #define GET_ARRAY_PIN(p) pgm_read_byte(&pin_array[p].pin)
+  #define digitalPinToTimer_DEBUG(P) digitalPinToTimer(P)
+  #define digitalPinToBitMask_DEBUG(P) digitalPinToBitMask(P)
+  #define digitalPinToPort_DEBUG(P) digitalPinToPort(P)
+  bool getValidPinMode(pin_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); }
+  #define getPinByIndex(x) pgm_read_byte(&pin_array[x].pin)
 
 #endif
 
-#define VALID_PIN(pin) (pin >= 0 && pin < NUM_DIGITAL_PINS ? 1 : 0)
+#define isValidPin(P) (P >= 0 && P < NUMBER_PINS_TOTAL)
 #if AVR_ATmega1284_FAMILY
-  #define DIGITAL_PIN_TO_ANALOG_PIN(P) int(analogInputToDigitalPin(0) - (P))
-  #define IS_ANALOG(P) ((P) >= analogInputToDigitalPin(7) && (P) <= analogInputToDigitalPin(0))
+  #define isAnalogPin(P) WITHIN(P, analogInputToDigitalPin(7), analogInputToDigitalPin(0))
+  #define digitalPinToAnalogIndex(P) int(isAnalogPin(P) ? (P) - analogInputToDigitalPin(7) : -1)
 #else
-  #define DIGITAL_PIN_TO_ANALOG_PIN(P) int((P) - analogInputToDigitalPin(0))
-  #define IS_ANALOG(P) ((P) >= analogInputToDigitalPin(0) && ((P) <= analogInputToDigitalPin(15) || (P) <= analogInputToDigitalPin(7)))
+  #define _ANALOG1(P) WITHIN(P, analogInputToDigitalPin(0), analogInputToDigitalPin(7))
+  #define _ANALOG2(P) WITHIN(P, analogInputToDigitalPin(8), analogInputToDigitalPin(15))
+  #define isAnalogPin(P) (_ANALOG1(P) || _ANALOG2(P))
+  #define digitalPinToAnalogIndex(P) int(_ANALOG1(P) ? (P) - analogInputToDigitalPin(0) : _ANALOG2(P) ? (P) - analogInputToDigitalPin(8) + 8 : -1)
 #endif
-#define GET_ARRAY_PIN(p) pgm_read_byte(&pin_array[p].pin)
+#define getPinByIndex(x) pgm_read_byte(&pin_array[x].pin)
 #define MULTI_NAME_PAD 26 // space needed to be pretty if not first name assigned to a pin
 
-void PRINT_ARRAY_NAME(uint8_t x) {
-  PGM_P const name_mem_pointer = (PGM_P)pgm_read_ptr(&pin_array[x].name);
-  LOOP_L_N(y, MAX_NAME_LENGTH) {
+void printPinNameByIndex(const uint8_t index) {
+  PGM_P const name_mem_pointer = (PGM_P)pgm_read_ptr(&pin_array[index].name);
+  for (uint8_t y = 0; y < MAX_NAME_LENGTH; ++y) {
     char temp_char = pgm_read_byte(name_mem_pointer + y);
     if (temp_char != 0)
       SERIAL_CHAR(temp_char);
     else {
-      LOOP_L_N(i, MAX_NAME_LENGTH - y) SERIAL_CHAR(' ');
+      for (uint8_t i = 0; i < MAX_NAME_LENGTH - y; ++i) SERIAL_CHAR(' ');
       break;
     }
   }
 }
 
-#define GET_ARRAY_IS_DIGITAL(x)   pgm_read_byte(&pin_array[x].is_digital)
-
+#define getPinIsDigitalByIndex(x)   pgm_read_byte(&pin_array[x].is_digital)
 
 #if defined(__AVR_ATmega1284P__)  // 1284 IDE extensions set this to the number of
   #undef NUM_DIGITAL_PINS         // digital only pins while all other CPUs have it
@@ -108,7 +125,7 @@ void PRINT_ARRAY_NAME(uint8_t x) {
  * Print a pin's PWM status.
  * Return true if it's currently a PWM pin.
  */
-static bool pwm_status(uint8_t pin) {
+bool pwm_status(const uint8_t pin) {
   char buffer[20];   // for the sprintf statements
 
   switch (digitalPinToTimer_DEBUG(pin)) {
@@ -162,7 +179,6 @@ static bool pwm_status(uint8_t pin) {
   SERIAL_ECHO_SP(2);
 } // pwm_status
 
-
 const volatile uint8_t* const PWM_other[][3] PROGMEM = {
     { &TCCR0A, &TCCR0B, &TIMSK0 },
     { &TCCR1A, &TCCR1B, &TIMSK1 },
@@ -180,7 +196,6 @@ const volatile uint8_t* const PWM_other[][3] PROGMEM = {
   #endif
 };
 
-
 const volatile uint8_t* const PWM_OCR[][3] PROGMEM = {
 
   #ifdef TIMER0A
@@ -216,7 +231,6 @@ const volatile uint8_t* const PWM_OCR[][3] PROGMEM = {
   #endif
 };
 
-
 #define TCCR_A(T)   pgm_read_word(&PWM_other[T][0])
 #define TCCR_B(T)   pgm_read_word(&PWM_other[T][1])
 #define TIMSK(T)    pgm_read_word(&PWM_other[T][2])
@@ -231,12 +245,12 @@ const volatile uint8_t* const PWM_OCR[][3] PROGMEM = {
 
 #define OCR_VAL(T, L)   pgm_read_word(&PWM_OCR[T][L])
 
-static void err_is_counter()     { SERIAL_ECHOPGM("   non-standard PWM mode"); }
-static void err_is_interrupt()   { SERIAL_ECHOPGM("   compare interrupt enabled"); }
-static void err_prob_interrupt() { SERIAL_ECHOPGM("   overflow interrupt enabled"); }
-static void print_is_also_tied() { SERIAL_ECHOPGM(" is also tied to this pin"); SERIAL_ECHO_SP(14); }
+void err_is_counter()     { SERIAL_ECHOPGM("   non-standard PWM mode"); }
+void err_is_interrupt()   { SERIAL_ECHOPGM("   compare interrupt enabled"); }
+void err_prob_interrupt() { SERIAL_ECHOPGM("   overflow interrupt enabled"); }
+void print_is_also_tied() { SERIAL_ECHOPGM(" is also tied to this pin"); SERIAL_ECHO_SP(14); }
 
-inline void com_print(const uint8_t N, const uint8_t Z) {
+void com_print(const uint8_t N, const uint8_t Z) {
   const uint8_t *TCCRA = (uint8_t*)TCCR_A(N);
   SERIAL_ECHOPGM("    COM", AS_DIGIT(N));
   SERIAL_CHAR(Z);
@@ -278,7 +292,7 @@ void timer_prefix(uint8_t T, char L, uint8_t N) {  // T - timer    L - pwm  N -
   if (TEST(*TMSK, TOIE)) err_prob_interrupt();
 }
 
-static void pwm_details(uint8_t pin) {
+void printPinPWM(const uint8_t pin) {
   switch (digitalPinToTimer_DEBUG(pin)) {
 
     #if ABTEST(0)
@@ -349,18 +363,16 @@ static void pwm_details(uint8_t pin) {
   #else
     UNUSED(print_is_also_tied);
   #endif
-} // pwm_details
+} // printPinPWM
 
 #ifndef digitalRead_mod                   // Use Teensyduino's version of digitalRead - it doesn't disable the PWMs
-  int digitalRead_mod(const int8_t pin) { // same as digitalRead except the PWM stop section has been removed
+  int digitalRead_mod(const pin_t pin) {  // same as digitalRead except the PWM stop section has been removed
     const uint8_t port = digitalPinToPort_DEBUG(pin);
     return (port != NOT_A_PIN) && (*portInputRegister(port) & digitalPinToBitMask_DEBUG(pin)) ? HIGH : LOW;
   }
 #endif
 
-#ifndef PRINT_PORT
-
-  void print_port(int8_t pin) {   // print port number
+void printPinPort(const pin_t pin) {   // print port number
   #ifdef digitalPinToPort_DEBUG
     uint8_t x;
     SERIAL_ECHOPGM("  Port: ");
@@ -390,11 +402,7 @@ static void pwm_details(uint8_t pin) {
   #endif
 }
 
-  #define PRINT_PORT(p) print_port(p)
-
-#endif
-
-#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)
+#define printPinNumber(P) do{ sprintf_P(buffer, PSTR("%3d "), P); SERIAL_ECHO(buffer); }while(0)
+#define printPinAnalog(P) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(P)); SERIAL_ECHO(buffer); }while(0)
 
 #undef ABTEST

Marlin/src/HAL/AVR/pinsDebug_Teensyduino.h

@@ -22,11 +22,10 @@
 #pragma once
 
 //
-//  some of the pin mapping functions of the Teensduino extension to the Arduino IDE
-//  do not function the same as the other Arduino extensions
+// Some of the pin mapping functions of the Arduino IDE Teensduino extension
+// function differently from other Arduino extensions.
 //
 
-
 #define TEENSYDUINO_IDE
 
 //digitalPinToTimer(pin) function works like Arduino but Timers are not defined
@@ -48,8 +47,6 @@
 #define PE 5
 #define PF 6
 
-#undef digitalPinToPort
-
 const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
   PD, // 0  - PD0 - INT0 - PWM
   PD, // 1  - PD1 - INT1 - PWM
@@ -101,11 +98,11 @@ const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
   PE, // 47 - PE3 (not defined in teensyduino)
 };
 
-#define digitalPinToPort(P) ( pgm_read_byte( digital_pin_to_port_PGM + (P) ) )
+#define digitalPinToPort(P) pgm_read_byte(digital_pin_to_port_PGM[P])
 
 // digitalPinToBitMask(pin) is OK
 
-#define digitalRead_mod(p)  extDigitalRead(p)   // Teensyduino's version of digitalRead doesn't
+#define digitalRead_mod(P)  extDigitalRead(P)   // Teensyduino's version of digitalRead doesn't
                                                 // disable the PWMs so we can use it as is
 
 // portModeRegister(pin) is OK

Marlin/src/HAL/AVR/pinsDebug_plus_70.h

@@ -231,7 +231,6 @@ const uint8_t PROGMEM digital_pin_to_bit_mask_PGM_plus_70[] = {
 
 #define digitalPinToBitMask_plus_70(P) ( pgm_read_byte( digital_pin_to_bit_mask_PGM_plus_70 + (P) ) )
 
-
 const uint8_t PROGMEM digital_pin_to_timer_PGM_plus_70[] = {
   // TIMERS
   // ------------------------

Marlin/src/HAL/AVR/timers.h

@@ -1,7 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -44,13 +46,13 @@ typedef uint16_t hal_timer_t;
   #define MF_TIMER_TEMP         0
 #endif
 
-#define TEMP_TIMER_FREQUENCY    ((F_CPU) / 64.0 / 256.0)
+#define TEMP_TIMER_FREQUENCY    (((F_CPU) + 0x2000) / 0x4000)
 
 #define STEPPER_TIMER_RATE      HAL_TIMER_RATE
 #define STEPPER_TIMER_PRESCALE  8
-#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // Cannot be of type double
+#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000)
 
-#define PULSE_TIMER_RATE       STEPPER_TIMER_RATE   // frequency of pulse timer
+#define PULSE_TIMER_RATE         STEPPER_TIMER_RATE
 #define PULSE_TIMER_PRESCALE     STEPPER_TIMER_PRESCALE
 #define PULSE_TIMER_TICKS_PER_US STEPPER_TIMER_TICKS_PER_US
 

Marlin/src/HAL/AVR/u8g_com_HAL_AVR_sw_spi.cpp

@@ -88,7 +88,7 @@ void u8g_spiSend_sw_AVR_mode_0(uint8_t val) {
   volatile uint8_t *outData = u8g_outData,
                    *outClock = u8g_outClock;
   U8G_ATOMIC_START();
-  LOOP_L_N(i, 8) {
+  for (uint8_t i = 0; i < 8; ++i) {
     if (val & 0x80)
       *outData |= bitData;
     else
@@ -108,7 +108,7 @@ void u8g_spiSend_sw_AVR_mode_3(uint8_t val) {
   volatile uint8_t *outData = u8g_outData,
                    *outClock = u8g_outClock;
   U8G_ATOMIC_START();
-  LOOP_L_N(i, 8) {
+  for (uint8_t i = 0; i < 8; ++i) {
     *outClock &= bitNotClock;
     if (val & 0x80)
       *outData |= bitData;
@@ -120,7 +120,6 @@ void u8g_spiSend_sw_AVR_mode_3(uint8_t val) {
   U8G_ATOMIC_END();
 }
 
-
 #if ENABLED(FYSETC_MINI_12864)
   #define SPISEND_SW_AVR u8g_spiSend_sw_AVR_mode_3
 #else

Marlin/src/HAL/DUE/HAL.cpp

@@ -1,7 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -45,7 +47,7 @@ uint16_t MarlinHAL::adc_result;
 #endif
 
 void MarlinHAL::init() {
-  #if ENABLED(SDSUPPORT)
+  #if HAS_MEDIA
     OUT_WRITE(SDSS, HIGH);  // Try to set SDSS inactive before any other SPI users start up
   #endif
   usb_task_init();          // Initialize the USB stack

Marlin/src/HAL/DUE/HAL.h

@@ -1,9 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- *
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
- * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -123,11 +123,11 @@ typedef Servo hal_servo_t;
 //
 // ADC
 //
-#define HAL_ADC_VREF         3.3
+#define HAL_ADC_VREF_MV   3300
 #define HAL_ADC_RESOLUTION  10
 
 #ifndef analogInputToDigitalPin
-  #define analogInputToDigitalPin(p) ((p < 12U) ? (p) + 54U : -1)
+  #define analogInputToDigitalPin(p) pin_t((p < 12U) ? (p) + 54U : -1)
 #endif
 
 //

Marlin/src/HAL/DUE/HAL_SPI.cpp

@@ -42,7 +42,7 @@
 // Public functions
 // ------------------------
 
-#if EITHER(DUE_SOFTWARE_SPI, FORCE_SOFT_SPI)
+#if ANY(DUE_SOFTWARE_SPI, FORCE_SOFT_SPI)
 
   // ------------------------
   // Software SPI

Marlin/src/HAL/DUE/MarlinSerial.cpp

@@ -474,7 +474,6 @@ void MarlinSerial<Cfg>::flushTX() {
   }
 }
 
-
 // If not using the USB port as serial port
 #if defined(SERIAL_PORT) && SERIAL_PORT >= 0
   template class MarlinSerial< MarlinSerialCfg<SERIAL_PORT> >;

Marlin/src/HAL/DUE/MarlinSerial.h

@@ -30,6 +30,7 @@
 #include <WString.h>
 
 #include "../../inc/MarlinConfigPre.h"
+#include "../../core/types.h"
 #include "../../core/serial_hook.h"
 
 // Define constants and variables for buffering incoming serial data.  We're
@@ -52,10 +53,6 @@
 //  #error "TX_BUFFER_SIZE must be 0, a power of 2 greater than 1, and no greater than 256."
 //#endif
 
-// Templated type selector
-template<bool b, typename T, typename F> struct TypeSelector { typedef T type;} ;
-template<typename T, typename F> struct TypeSelector<false, T, F> { typedef F type; };
-
 // Templated structure wrapper
 template<typename S, unsigned int addr> struct StructWrapper {
   constexpr StructWrapper(int) {}
@@ -76,7 +73,7 @@ protected:
   static constexpr int HWUART_IRQ_ID = IRQ_IDS[Cfg::PORT];
 
   // Base size of type on buffer size
-  typedef typename TypeSelector<(Cfg::RX_SIZE>256), uint16_t, uint8_t>::type ring_buffer_pos_t;
+  typedef uvalue_t(Cfg::RX_SIZE - 1) ring_buffer_pos_t;
 
   struct ring_buffer_r {
     volatile ring_buffer_pos_t head, tail;

Marlin/src/HAL/DUE/Servo.cpp

@@ -50,7 +50,7 @@
 static Flags<_Nbr_16timers> DisablePending; // ISR should disable the timer at the next timer reset
 
 // ------------------------
-/// Interrupt handler for the TC0 channel 1.
+// Interrupt handler for the TC0 channel 1.
 // ------------------------
 void Servo_Handler(const timer16_Sequence_t, Tc*, const uint8_t);
 

Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp

@@ -81,7 +81,7 @@ Pio *SCK_pPio, *MOSI_pPio;
 uint32_t SCK_dwMask, MOSI_dwMask;
 
 void u8g_spiSend_sw_DUE_mode_0(uint8_t val) { // 3MHz
-  LOOP_L_N(i, 8) {
+  for (uint8_t i = 0; i < 8; ++i) {
     if (val & 0x80)
       MOSI_pPio->PIO_SODR = MOSI_dwMask;
     else
@@ -95,7 +95,7 @@ void u8g_spiSend_sw_DUE_mode_0(uint8_t val) { // 3MHz
 }
 
 void u8g_spiSend_sw_DUE_mode_3(uint8_t val) { // 3.5MHz
-  LOOP_L_N(i, 8) {
+  for (uint8_t i = 0; i < 8; ++i) {
     SCK_pPio->PIO_CODR = SCK_dwMask;
     DELAY_NS(50);
     if (val & 0x80)

Marlin/src/HAL/DUE/eeprom_flash.cpp

@@ -1,10 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- *
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
- * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
- * Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

Marlin/src/HAL/DUE/eeprom_wired.cpp

@@ -1,10 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- *
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
- * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
- * Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

Marlin/src/HAL/DUE/endstop_interrupts.h

@@ -47,33 +47,33 @@ void endstop_ISR() { endstops.update(); }
 
 void setup_endstop_interrupts() {
   #define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
-  TERN_(HAS_X_MAX, _ATTACH(X_MAX_PIN));
-  TERN_(HAS_X_MIN, _ATTACH(X_MIN_PIN));
-  TERN_(HAS_Y_MAX, _ATTACH(Y_MAX_PIN));
-  TERN_(HAS_Y_MIN, _ATTACH(Y_MIN_PIN));
-  TERN_(HAS_Z_MAX, _ATTACH(Z_MAX_PIN));
-  TERN_(HAS_Z_MIN, _ATTACH(Z_MIN_PIN));
-  TERN_(HAS_X2_MAX, _ATTACH(X2_MAX_PIN));
-  TERN_(HAS_X2_MIN, _ATTACH(X2_MIN_PIN));
-  TERN_(HAS_Y2_MAX, _ATTACH(Y2_MAX_PIN));
-  TERN_(HAS_Y2_MIN, _ATTACH(Y2_MIN_PIN));
-  TERN_(HAS_Z2_MAX, _ATTACH(Z2_MAX_PIN));
-  TERN_(HAS_Z2_MIN, _ATTACH(Z2_MIN_PIN));
-  TERN_(HAS_Z3_MAX, _ATTACH(Z3_MAX_PIN));
-  TERN_(HAS_Z3_MIN, _ATTACH(Z3_MIN_PIN));
-  TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
-  TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
+  TERN_(USE_X_MAX, _ATTACH(X_MAX_PIN));
+  TERN_(USE_X_MIN, _ATTACH(X_MIN_PIN));
+  TERN_(USE_Y_MAX, _ATTACH(Y_MAX_PIN));
+  TERN_(USE_Y_MIN, _ATTACH(Y_MIN_PIN));
+  TERN_(USE_Z_MAX, _ATTACH(Z_MAX_PIN));
+  TERN_(USE_Z_MIN, _ATTACH(Z_MIN_PIN));
+  TERN_(USE_X2_MAX, _ATTACH(X2_MAX_PIN));
+  TERN_(USE_X2_MIN, _ATTACH(X2_MIN_PIN));
+  TERN_(USE_Y2_MAX, _ATTACH(Y2_MAX_PIN));
+  TERN_(USE_Y2_MIN, _ATTACH(Y2_MIN_PIN));
+  TERN_(USE_Z2_MAX, _ATTACH(Z2_MAX_PIN));
+  TERN_(USE_Z2_MIN, _ATTACH(Z2_MIN_PIN));
+  TERN_(USE_Z3_MAX, _ATTACH(Z3_MAX_PIN));
+  TERN_(USE_Z3_MIN, _ATTACH(Z3_MIN_PIN));
+  TERN_(USE_Z4_MAX, _ATTACH(Z4_MAX_PIN));
+  TERN_(USE_Z4_MIN, _ATTACH(Z4_MIN_PIN));
   TERN_(HAS_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
-  TERN_(HAS_I_MAX, _ATTACH(I_MAX_PIN));
-  TERN_(HAS_I_MIN, _ATTACH(I_MIN_PIN));
-  TERN_(HAS_J_MAX, _ATTACH(J_MAX_PIN));
-  TERN_(HAS_J_MIN, _ATTACH(J_MIN_PIN));
-  TERN_(HAS_K_MAX, _ATTACH(K_MAX_PIN));
-  TERN_(HAS_K_MIN, _ATTACH(K_MIN_PIN));
-  TERN_(HAS_U_MAX, _ATTACH(U_MAX_PIN));
-  TERN_(HAS_U_MIN, _ATTACH(U_MIN_PIN));
-  TERN_(HAS_V_MAX, _ATTACH(V_MAX_PIN));
-  TERN_(HAS_V_MIN, _ATTACH(V_MIN_PIN));
-  TERN_(HAS_W_MAX, _ATTACH(W_MAX_PIN));
-  TERN_(HAS_W_MIN, _ATTACH(W_MIN_PIN));
+  TERN_(USE_I_MAX, _ATTACH(I_MAX_PIN));
+  TERN_(USE_I_MIN, _ATTACH(I_MIN_PIN));
+  TERN_(USE_J_MAX, _ATTACH(J_MAX_PIN));
+  TERN_(USE_J_MIN, _ATTACH(J_MIN_PIN));
+  TERN_(USE_K_MAX, _ATTACH(K_MAX_PIN));
+  TERN_(USE_K_MIN, _ATTACH(K_MIN_PIN));
+  TERN_(USE_U_MAX, _ATTACH(U_MAX_PIN));
+  TERN_(USE_U_MIN, _ATTACH(U_MIN_PIN));
+  TERN_(USE_V_MAX, _ATTACH(V_MAX_PIN));
+  TERN_(USE_V_MIN, _ATTACH(V_MIN_PIN));
+  TERN_(USE_W_MAX, _ATTACH(W_MAX_PIN));
+  TERN_(USE_W_MIN, _ATTACH(W_MIN_PIN));
 }

Marlin/src/HAL/DUE/fastio.h

@@ -189,12 +189,12 @@
  */
 
 // UART
-#define RXD        DIO0
-#define TXD        DIO1
+#define RXD        0
+#define TXD        1
 
 // TWI (I2C)
-#define SCL        DIO21
-#define SDA        DIO20
+#define SCL        21
+#define SDA        20
 
 /**
  * pins

Marlin/src/HAL/DUE/fastio/G2_PWM.h

@@ -49,7 +49,6 @@ extern volatile uint32_t *SODR_A, *SODR_B, *CODR_A, *CODR_B;
 
 #define PWM_MAP_INIT_ROW(IO,ZZ) { ZZ == 'A' ? SODR_A : SODR_B,  ZZ == 'A' ? CODR_A : CODR_B, 1 << _PIN(IO) }
 
-
 #define PWM_MAP_INIT {  PWM_MAP_INIT_ROW(MOTOR_CURRENT_PWM_X_PIN, 'B'), \
                         PWM_MAP_INIT_ROW(MOTOR_CURRENT_PWM_Y_PIN, 'B'), \
                         PWM_MAP_INIT_ROW(MOTOR_CURRENT_PWM_Z_PIN, 'B'), \
@@ -63,7 +62,7 @@ extern PWM_map ISR_table[NUM_PWMS];
 extern uint32_t motor_current_setting[3];
 
 #define IR_BIT(p) (WITHIN(p, 0, 3) ? (p) : (p) + 4)
-#define COPY_ACTIVE_TABLE() do{ LOOP_L_N(i, 6) work_table[i] = active_table[i]; }while(0)
+#define COPY_ACTIVE_TABLE() do{ for (uint8_t i = 0; i < 6; ++i) work_table[i] = active_table[i]; }while(0)
 
 #define PWM_MR0 19999         // base repetition rate minus one count - 20mS
 #define PWM_PR 24             // prescaler value - prescaler divide by 24 + 1  -  1 MHz output

Marlin/src/HAL/DUE/fastio/G2_pins.h

@@ -168,7 +168,6 @@ const G2_PinDescription G2_g_APinDescription[] = {
   { PIOB, PIO_PB21,          ID_PIOB, PIO_OUTPUT_0, PIO_DEFAULT, PIN_ATTR_DIGITAL,                  NO_ADC, NO_ADC, NOT_ON_PWM,  NOT_ON_TIMER }, // PIN 52
   { PIOB, PIO_PB14,          ID_PIOB, PIO_OUTPUT_0, PIO_DEFAULT, PIN_ATTR_DIGITAL,                  NO_ADC, NO_ADC, NOT_ON_PWM,  NOT_ON_TIMER }, // PIN 53
 
-
   // 54 .. 65 - Analog pins
   // ----------------------
   { PIOA, PIO_PA16X1_AD7,    ID_PIOA, PIO_INPUT,    PIO_DEFAULT, PIN_ATTR_ANALOG,                   ADC0,   ADC7,   NOT_ON_PWM,  NOT_ON_TIMER }, // AD0

Marlin/src/HAL/DUE/inc/Conditionals_LCD.h

@@ -20,7 +20,3 @@
  *
  */
 #pragma once
-
-#if HAS_SPI_TFT || HAS_FSMC_TFT
-  #error "Sorry! TFT displays are not available for HAL/DUE."
-#endif

Marlin/src/HAL/DUE/inc/Conditionals_post.h

@@ -23,6 +23,6 @@
 
 #if USE_FALLBACK_EEPROM
   #define FLASH_EEPROM_EMULATION
-#elif EITHER(I2C_EEPROM, SPI_EEPROM)
+#elif ANY(I2C_EEPROM, SPI_EEPROM)
   #define USE_SHARED_EEPROM 1
 #endif

Marlin/src/HAL/DUE/inc/SanityCheck.h

@@ -25,6 +25,10 @@
  * Test Arduino Due specific configuration values for errors at compile-time.
  */
 
+#if HAS_SPI_TFT || HAS_FSMC_TFT
+  #error "Sorry! TFT displays are not available for HAL/DUE."
+#endif
+
 /**
  * Check for common serial pin conflicts
  */
@@ -64,20 +68,19 @@
  * Usually the hardware SPI pins are only available to the LCD. This makes the DUE hard SPI used at the same time
  * as the TMC2130 soft SPI the most common setup.
  */
-#define _IS_HW_SPI(P) (defined(TMC_SW_##P) && (TMC_SW_##P == SD_MOSI_PIN || TMC_SW_##P == SD_MISO_PIN || TMC_SW_##P == SD_SCK_PIN))
-
-#if ENABLED(SDSUPPORT) && HAS_DRIVER(TMC2130)
-  #if ENABLED(TMC_USE_SW_SPI)
-    #if DISABLED(DUE_SOFTWARE_SPI) && (_IS_HW_SPI(MOSI) || _IS_HW_SPI(MISO) || _IS_HW_SPI(SCK))
+#if HAS_MEDIA && HAS_DRIVER(TMC2130)
+  #define _IS_HW_SPI(P) (defined(TMC_SPI_##P) && (TMC_SPI_##P == SD_MOSI_PIN || TMC_SPI_##P == SD_MISO_PIN || TMC_SPI_##P == SD_SCK_PIN))
+  #if DISABLED(DUE_SOFTWARE_SPI) && ENABLED(TMC_USE_SW_SPI) && (_IS_HW_SPI(MOSI) || _IS_HW_SPI(MISO) || _IS_HW_SPI(SCK))
     #error "DUE hardware SPI is required but is incompatible with TMC2130 software SPI. Either disable TMC_USE_SW_SPI or use separate pins for the two SPIs."
   #endif
-  #elif ENABLED(DUE_SOFTWARE_SPI)
+  #if ENABLED(DUE_SOFTWARE_SPI) && DISABLED(TMC_USE_SW_SPI)
     #error "DUE software SPI is required but is incompatible with TMC2130 hardware SPI. Enable TMC_USE_SW_SPI to fix."
   #endif
+  #undef _IS_HW_SPI
 #endif
 
 #if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY
-  #error "Features requiring Hardware PWM (FAST_PWM_FAN, SPINDLE_LASER_FREQUENCY) are not yet supported on DUE."
+  #error "Features requiring Hardware PWM (FAST_PWM_FAN, SPINDLE_LASER_FREQUENCY) are not yet supported for HAL/DUE."
 #endif
 
 #if HAS_TMC_SW_SERIAL

Marlin/src/HAL/DUE/pinsDebug.h

@@ -19,13 +19,26 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
- * Support routines for Due
- */
-
-/**
- * Translation of routines & variables used by pinsDebug.h
+ * Pins Debugging for DUE
+ *
+ *   - NUMBER_PINS_TOTAL
+ *   - MULTI_NAME_PAD
+ *   - getPinByIndex(index)
+ *   - printPinNameByIndex(index)
+ *   - getPinIsDigitalByIndex(index)
+ *   - digitalPinToAnalogIndex(pin)
+ *   - getValidPinMode(pin)
+ *   - isValidPin(pin)
+ *   - isAnalogPin(pin)
+ *   - digitalRead_mod(pin)
+ *   - pwm_status(pin)
+ *   - printPinPWM(pin)
+ *   - printPinPort(pin)
+ *   - printPinNumber(pin)
+ *   - printPinAnalog(pin)
  */
 
 #include "../shared/Marduino.h"
@@ -63,21 +76,20 @@
 
 #define NUMBER_PINS_TOTAL PINS_COUNT
 
-#define digitalRead_mod(p) extDigitalRead(p)  // AVR digitalRead disabled PWM before it read the pin
-#define PRINT_PORT(p)
-#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%02d"), p); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)
-#define GET_ARRAY_PIN(p) pin_array[p].pin
-#define GET_ARRAY_IS_DIGITAL(p) pin_array[p].is_digital
-#define VALID_PIN(pin) (pin >= 0 && pin < int8_t(NUMBER_PINS_TOTAL))
-#define DIGITAL_PIN_TO_ANALOG_PIN(p) int(p - analogInputToDigitalPin(0))
-#define IS_ANALOG(P) WITHIN(P, char(analogInputToDigitalPin(0)), char(analogInputToDigitalPin(NUM_ANALOG_INPUTS - 1)))
-#define pwm_status(pin) (((g_pinStatus[pin] & 0xF) == PIN_STATUS_PWM) && \
-                        ((g_APinDescription[pin].ulPinAttribute & PIN_ATTR_PWM) == PIN_ATTR_PWM))
+#define digitalRead_mod(P) extDigitalRead(P)  // AVR digitalRead disabled PWM before it read the pin
+#define printPinNameByIndex(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
+#define printPinNumber(P) do{ sprintf_P(buffer, PSTR("%02d"), P); SERIAL_ECHO(buffer); }while(0)
+#define printPinAnalog(P) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(P)); SERIAL_ECHO(buffer); }while(0)
+#define getPinByIndex(x) pin_array[x].pin
+#define getPinIsDigitalByIndex(x) pin_array[x].is_digital
+#define isValidPin(P) (P >= 0 && P < pin_t(NUMBER_PINS_TOTAL))
+#define digitalPinToAnalogIndex(P) int(P - analogInputToDigitalPin(0))
+#define isAnalogPin(P) WITHIN(P, pin_t(analogInputToDigitalPin(0)), pin_t(analogInputToDigitalPin(NUM_ANALOG_INPUTS - 1)))
+#define pwm_status(P) (((g_pinStatus[P] & 0xF) == PIN_STATUS_PWM) && \
+                        ((g_APinDescription[P].ulPinAttribute & PIN_ATTR_PWM) == PIN_ATTR_PWM))
 #define MULTI_NAME_PAD 14 // space needed to be pretty if not first name assigned to a pin
 
-bool GET_PINMODE(int8_t pin) {  // 1: output, 0: input
+bool getValidPinMode(const pin_t pin) {  // 1: output, 0: input
   volatile Pio* port = g_APinDescription[pin].pPort;
   uint32_t mask = g_APinDescription[pin].ulPin;
   uint8_t pin_status = g_pinStatus[pin] & 0xF;
@@ -86,13 +98,15 @@ bool GET_PINMODE(int8_t pin) {  // 1: output, 0: input
           || pwm_status(pin));
 }
 
-void pwm_details(int32_t pin) {
+void printPinPWM(const int32_t pin) {
   if (pwm_status(pin)) {
     uint32_t chan = g_APinDescription[pin].ulPWMChannel;
     SERIAL_ECHOPGM("PWM = ", PWM_INTERFACE->PWM_CH_NUM[chan].PWM_CDTY);
   }
 }
 
+void printPinPort(const pin_t) {}
+
 /**
  * DUE Board pin   |  PORT  | Label
  * ----------------+--------+-------

Marlin/src/HAL/DUE/spi_pins.h

@@ -24,7 +24,7 @@
 /**
  * Define SPI Pins: SCK, MISO, MOSI, SS
  *
- * Available chip select pins for HW SPI are 4 10 52 77
+ * Available chip select pins for HW SPI are 4 10 52 77 87
  */
 #if SDSS == 4 || SDSS == 10 || SDSS == 52 || SDSS == 77 || SDSS == 87
   #if SDSS == 4

Marlin/src/HAL/DUE/timers.cpp

@@ -1,9 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- *
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
- * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

Marlin/src/HAL/DUE/timers.h

@@ -1,8 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- *
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by

Marlin/src/HAL/DUE/upload_extra_script.py

@@ -11,7 +11,7 @@ if pioutil.is_pio_build():
 
     if current_OS == 'Windows':
 
-        Import("env")
+        env = pioutil.env
 
         # Use bossac.exe on Windows
         env.Replace(

Marlin/src/HAL/DUE/usb/README.md

@@ -0,0 +1,29 @@
+# USB Files Source Documentation
+
+## Source
+
+We sourced the USB files in Marlin from the Atmel ASF (Advanced Software Framework). The framework provides a variety of examples which were utilized in this project.
+
+Atmel doesn't provide these files in a source repository but they can be extracted from ASF, which can be downloaded from Atmel.
+
+[Advanced Software Framework](https://www.microchip.com/en-us/tools-resources/develop/libraries/advanced-software-framework)
+
+## Modifications
+
+The files are mostly unmodified except for minor cosmetic changes but some more significant changes were needed.
+
+The changes that prompted the addition of this README file are listed below. Other changes may have been made prior to this.
+
+1. Modified `uotghs_device_due.c` to resolve race conditions that could leave interrupts asserted when freezing the peripheral clock, resulting in hangs and watchdog resets due to the ensuing interrupt storm.
+
+## Version Information
+
+We don't know the exact version of ASF used as the source. However, the copyright information in the files indicates they are from 2015.
+
+## Upgrade Considerations
+
+We looked at the ASF 3.52.0 files released in 2022 but saw no immediate benefits to justify an upgrade. It's important to note that the files in Marlin don't follow the same folder structure as the files in ASF, which complicates the process of comparing and applying updated files.
+
+When these files are updated it's important to carefully compare them to Marlin's versions so any improvements in the Marlin sources are brought forward.
+
+It would be best to make Marlin's directory structure align with ASF or at least document the source of each file to ease future updates.

Marlin/src/HAL/DUE/usb/compiler.h

@@ -142,7 +142,6 @@
  */
 #define COMPILER_PACK_RESET()          COMPILER_PRAGMA(pack())
 
-
 /**
  * \brief Set aligned boundary.
  */
@@ -283,7 +282,6 @@ typedef double                  F64;  //!< 64-bit floating-point number.
 typedef uint32_t                iram_size_t;
 //! @}
 
-
 /*! \name Status Types
  */
 //! @{
@@ -291,7 +289,6 @@ typedef bool                Status_bool_t;  //!< Boolean status.
 typedef U8                  Status_t;       //!< 8-bit-coded status.
 //! @}
 
-
 /*! \name Aliasing Aggregate Types
  */
 //! @{
@@ -462,7 +459,6 @@ typedef struct
 #endif
 //! @}
 
-
 #ifndef __ASSEMBLY__ // not for assembling.
 
 //! \name Optimization Control
@@ -581,7 +577,6 @@ typedef struct
 
 //! @}
 
-
 /*! \name Zero-Bit Counting
  *
  * Under GCC, __builtin_clz and __builtin_ctz behave like macros when
@@ -692,7 +687,6 @@ typedef struct
 
 //! @}
 
-
 /*! \name Bit Reversing
  */
 //! @{
@@ -732,7 +726,6 @@ typedef struct
 
 //! @}
 
-
 /*! \name Alignment
  */
 //! @{
@@ -798,7 +791,6 @@ typedef struct
  */
 #define Long_call(addr)                   ((*(void (*)(void))(addr))())
 
-
 /*! \name MCU Endianism Handling
  * ARM is MCU little endianism.
  */
@@ -868,7 +860,6 @@ typedef struct
 #define  CPU_TO_BE32(x) swap32(x)
 //! @}
 
-
 /*! \name Endianism Conversion
  *
  * The same considerations as for clz and ctz apply here but GCC's
@@ -955,7 +946,6 @@ typedef struct
 
 //! @}
 
-
 /*! \name Target Abstraction
  */
 //! @{
@@ -997,7 +987,6 @@ typedef U8                  Byte;       //!< 8-bit unsigned integer.
 
 #endif  // #ifndef __ASSEMBLY__
 
-
 #ifdef __ICCARM__
 #define SHORTENUM           __packed
 #elif defined(__GNUC__)

Marlin/src/HAL/DUE/usb/conf_access.h

@@ -81,7 +81,6 @@
 #define LUN_0_NAME                              "\"SD/MMC Card\""
 //! @}
 
-
 /*! \name Actions Associated with Memory Accesses
  *
  * Write here the action to associate with each memory access.
@@ -112,5 +111,4 @@
 #define GLOBAL_WR_PROTECT    false   //!< Management of a global write protection.
 //! @}
 
-
 #endif // _CONF_ACCESS_H_

Marlin/src/HAL/DUE/usb/conf_clock.h

@@ -96,5 +96,4 @@
 // - UPLL frequency: 480MHz
 // - USB clock: 480 / 1 = 480MHz
 
-
 #endif /* CONF_CLOCK_H_INCLUDED */

Marlin/src/HAL/DUE/usb/conf_usb.h

@@ -88,7 +88,6 @@
 #endif
 //@}
 
-
 /**
  * USB Device Callbacks definitions (Optional)
  * @{
@@ -101,7 +100,7 @@
 #define  USB_DEVICE_SPECIFIC_REQUEST()  usb_task_other_requests()
 //@}
 
-#if ENABLED(SDSUPPORT)
+#if HAS_MEDIA
   /**
    * USB Device low level configuration
    * When only one interface is used, these configurations are defined by the class module.
@@ -150,7 +149,6 @@
 
 //@}
 
-
 /**
  * USB Interface Configuration
  * @{
@@ -185,7 +183,7 @@
 //! Enable id string of interface to add an extra USB string
 #define  UDI_CDC_IAD_STRING_ID            4
 
-#if ENABLED(SDSUPPORT)
+#if HAS_MEDIA
   /**
    * USB CDC low level configuration
    * In standalone these configurations are defined by the CDC module.
@@ -210,7 +208,6 @@
   //@}
   //@}
 
-
   /**
    * Configuration of MSC interface
    * @{
@@ -245,7 +242,6 @@
 
   //@}
 
-
   /**
    * Description of Composite Device
    * @{

Marlin/src/HAL/DUE/usb/ctrl_access.c

@@ -68,7 +68,6 @@
 #endif
 #include "ctrl_access.h"
 
-
 //_____ D E F I N I T I O N S ______________________________________________
 
 #ifdef FREERTOS_USED
@@ -112,7 +111,6 @@ static xSemaphoreHandle ctrl_access_semphr = NULL;
 
 #endif  // FREERTOS_USED
 
-
 #if MAX_LUN
 
 /*! \brief Initializes an entry of the LUN descriptor table.
@@ -242,17 +240,14 @@ static const struct
 
 #endif
 
-
 #if GLOBAL_WR_PROTECT == true
 bool g_wr_protect;
 #endif
 
-
 /*! \name Control Interface
  */
 //! @{
 
-
 #ifdef FREERTOS_USED
 
 bool ctrl_access_init(void)
@@ -270,7 +265,6 @@ bool ctrl_access_init(void)
   return true;
 }
 
-
 /*! \brief Locks accesses to LUNs.
  *
  * \return \c true if the access was successfully locked, else \c false.
@@ -288,7 +282,6 @@ static bool ctrl_access_lock(void)
 
 #endif  // FREERTOS_USED
 
-
 U8 get_nb_lun(void)
 {
 #if MEM_USB == ENABLE
@@ -309,13 +302,11 @@ U8 get_nb_lun(void)
 #endif
 }
 
-
 U8 get_cur_lun(void)
 {
   return LUN_ID_0;
 }
 
-
 Ctrl_status mem_test_unit_ready(U8 lun)
 {
   Ctrl_status status;
@@ -337,7 +328,6 @@ Ctrl_status mem_test_unit_ready(U8 lun)
   return status;
 }
 
-
 Ctrl_status mem_read_capacity(U8 lun, U32 *u32_nb_sector)
 {
   Ctrl_status status;
@@ -359,7 +349,6 @@ Ctrl_status mem_read_capacity(U8 lun, U32 *u32_nb_sector)
   return status;
 }
 
-
 U8 mem_sector_size(U8 lun)
 {
   U8 sector_size;
@@ -381,7 +370,6 @@ U8 mem_sector_size(U8 lun)
   return sector_size;
 }
 
-
 bool mem_unload(U8 lun, bool unload)
 {
   bool unloaded;
@@ -433,7 +421,6 @@ bool mem_wr_protect(U8 lun)
   return wr_protect;
 }
 
-
 bool mem_removal(U8 lun)
 {
   bool removal;
@@ -458,7 +445,6 @@ bool mem_removal(U8 lun)
   return removal;
 }
 
-
 const char *mem_name(U8 lun)
 {
 #if MAX_LUN==0
@@ -475,17 +461,14 @@ const char *mem_name(U8 lun)
 #endif
 }
 
-
 //! @}
 
-
 #if ACCESS_USB == true
 
 /*! \name MEM <-> USB Interface
  */
 //! @{
 
-
 Ctrl_status memory_2_usb(U8 lun, U32 addr, U16 nb_sector)
 {
   Ctrl_status status;
@@ -505,7 +488,6 @@ Ctrl_status memory_2_usb(U8 lun, U32 addr, U16 nb_sector)
   return status;
 }
 
-
 Ctrl_status usb_2_memory(U8 lun, U32 addr, U16 nb_sector)
 {
   Ctrl_status status;
@@ -525,19 +507,16 @@ Ctrl_status usb_2_memory(U8 lun, U32 addr, U16 nb_sector)
   return status;
 }
 
-
 //! @}
 
 #endif  // ACCESS_USB == true
 
-
 #if ACCESS_MEM_TO_RAM == true
 
 /*! \name MEM <-> RAM Interface
  */
 //! @{
 
-
 Ctrl_status memory_2_ram(U8 lun, U32 addr, void *ram)
 {
   Ctrl_status status;
@@ -564,7 +543,6 @@ Ctrl_status memory_2_ram(U8 lun, U32 addr, void *ram)
   return status;
 }
 
-
 Ctrl_status ram_2_memory(U8 lun, U32 addr, const void *ram)
 {
   Ctrl_status status;
@@ -591,19 +569,16 @@ Ctrl_status ram_2_memory(U8 lun, U32 addr, const void *ram)
   return status;
 }
 
-
 //! @}
 
 #endif  // ACCESS_MEM_TO_RAM == true
 
-
 #if ACCESS_STREAM == true
 
 /*! \name Streaming MEM <-> MEM Interface
  */
 //! @{
 
-
   #if ACCESS_MEM_TO_MEM == true
 
 #include "fat.h"
@@ -625,21 +600,18 @@ Ctrl_status stream_mem_to_mem(U8 src_lun, U32 src_addr, U8 dest_lun, U32 dest_ad
 
   #endif  // ACCESS_MEM_TO_MEM == true
 
-
 Ctrl_status stream_state(U8 id)
 {
   UNUSED(id);
   return CTRL_GOOD;
 }
 
-
 U16 stream_stop(U8 id)
 {
   UNUSED(id);
   return 0;
 }
 
-
 //! @}
 
 #endif // ACCESS_STREAM

Marlin/src/HAL/DUE/usb/ctrl_access.h

@@ -56,7 +56,6 @@
  * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
-
 #ifndef _CTRL_ACCESS_H_
 #define _CTRL_ACCESS_H_
 
@@ -89,7 +88,6 @@ typedef enum
   CTRL_BUSY       = FAIL + 2  //!< Memory not initialized or changed.
 } Ctrl_status;
 
-
 // FYI: Each Logical Unit Number (LUN) corresponds to a memory.
 
 // Check LUN defines.
@@ -136,7 +134,6 @@ typedef enum
 #define LUN_ID_USB      (MAX_LUN)           //!< First dynamic LUN (USB host mass storage).
 //! @}
 
-
 // Include LUN header files.
 #if LUN_0 == ENABLE
   #include LUN_0_INCLUDE
@@ -166,13 +163,11 @@ typedef enum
   #include LUN_USB_INCLUDE
 #endif
 
-
 // Check the configuration of write protection in conf_access.h.
 #ifndef GLOBAL_WR_PROTECT
   #error GLOBAL_WR_PROTECT must be defined as true or false in conf_access.h
 #endif
 
-
 #if GLOBAL_WR_PROTECT == true
 
 //! Write protect.
@@ -180,7 +175,6 @@ extern bool g_wr_protect;
 
 #endif
 
-
 /*! \name Control Interface
  */
 //! @{
@@ -279,7 +273,6 @@ extern const char *mem_name(U8 lun);
 
 //! @}
 
-
 #if ACCESS_USB == true
 
 /*! \name MEM <-> USB Interface
@@ -310,7 +303,6 @@ extern Ctrl_status usb_2_memory(U8 lun, U32 addr, U16 nb_sector);
 
 #endif  // ACCESS_USB == true
 
-
 #if ACCESS_MEM_TO_RAM == true
 
 /*! \name MEM <-> RAM Interface
@@ -341,7 +333,6 @@ extern Ctrl_status ram_2_memory(U8 lun, U32 addr, const void *ram);
 
 #endif  // ACCESS_MEM_TO_RAM == true
 
-
 #if ACCESS_STREAM == true
 
 /*! \name Streaming MEM <-> MEM Interface

Marlin/src/HAL/DUE/usb/genclk.h

@@ -108,31 +108,23 @@ struct genclk_config {
   uint32_t ctrl;
 };
 
-static inline void genclk_config_defaults(struct genclk_config *p_cfg,
-		uint32_t ul_id)
-{
+static inline void genclk_config_defaults(struct genclk_config *p_cfg, uint32_t ul_id) {
   ul_id = ul_id;
   p_cfg->ctrl = 0;
 }
 
-static inline void genclk_config_read(struct genclk_config *p_cfg,
-		uint32_t ul_id)
-{
+static inline void genclk_config_read(struct genclk_config *p_cfg, uint32_t ul_id) {
   p_cfg->ctrl = PMC->PMC_PCK[ul_id];
 }
 
-static inline void genclk_config_write(const struct genclk_config *p_cfg,
-		uint32_t ul_id)
-{
+static inline void genclk_config_write(const struct genclk_config *p_cfg, uint32_t ul_id) {
   PMC->PMC_PCK[ul_id] = p_cfg->ctrl;
 }
 
 //! \name Programmable Clock Source and Prescaler configuration
 //@{
 
-static inline void genclk_config_set_source(struct genclk_config *p_cfg,
-		enum genclk_source e_src)
-{
+static inline void genclk_config_set_source(struct genclk_config *p_cfg, enum genclk_source e_src) {
   p_cfg->ctrl &= (~PMC_PCK_CSS_Msk);
 
   switch (e_src) {
@@ -164,29 +156,23 @@ static inline void genclk_config_set_source(struct genclk_config *p_cfg,
   }
 }
 
-static inline void genclk_config_set_divider(struct genclk_config *p_cfg,
-		uint32_t e_divider)
-{
+static inline void genclk_config_set_divider(struct genclk_config *p_cfg, uint32_t e_divider) {
   p_cfg->ctrl &= ~PMC_PCK_PRES_Msk;
   p_cfg->ctrl |= e_divider;
 }
 
 //@}
 
-static inline void genclk_enable(const struct genclk_config *p_cfg,
-		uint32_t ul_id)
-{
+static inline void genclk_enable(const struct genclk_config *p_cfg, uint32_t ul_id) {
   PMC->PMC_PCK[ul_id] = p_cfg->ctrl;
   pmc_enable_pck(ul_id);
 }
 
-static inline void genclk_disable(uint32_t ul_id)
-{
+static inline void genclk_disable(uint32_t ul_id) {
   pmc_disable_pck(ul_id);
 }
 
-static inline void genclk_enable_source(enum genclk_source e_src)
-{
+static inline void genclk_enable_source(enum genclk_source e_src) {
   switch (e_src) {
   case GENCLK_PCK_SRC_SLCK_RC:
     if (!osc_is_ready(OSC_SLCK_32K_RC)) {

Marlin/src/HAL/DUE/usb/mrepeat.h

@@ -57,7 +57,6 @@
 
 #include "preprocessor.h"
 
-
 //! Maximal number of repetitions supported by MREPEAT.
 #define MREPEAT_LIMIT   256
 

Marlin/src/HAL/DUE/usb/osc.h

@@ -115,8 +115,7 @@ extern "C" {
 #define OSC_MAINCK_BYPASS_HZ        BOARD_FREQ_MAINCK_BYPASS        //!< External bypass oscillator.
 //@}
 
-static inline void osc_enable(uint32_t ul_id)
-{
+static inline void osc_enable(uint32_t ul_id) {
   switch (ul_id) {
   case OSC_SLCK_32K_RC:
     break;
@@ -129,7 +128,6 @@ static inline void osc_enable(uint32_t ul_id)
     pmc_switch_sclk_to_32kxtal(PMC_OSC_BYPASS);
     break;
 
-
   case OSC_MAINCK_4M_RC:
     pmc_switch_mainck_to_fastrc(CKGR_MOR_MOSCRCF_4_MHz);
     break;
@@ -142,7 +140,6 @@ static inline void osc_enable(uint32_t ul_id)
     pmc_switch_mainck_to_fastrc(CKGR_MOR_MOSCRCF_12_MHz);
     break;
 
-
   case OSC_MAINCK_XTAL:
     pmc_switch_mainck_to_xtal(PMC_OSC_XTAL/*,
       pmc_us_to_moscxtst(BOARD_OSC_STARTUP_US,
@@ -157,8 +154,7 @@ static inline void osc_enable(uint32_t ul_id)
   }
 }
 
-static inline void osc_disable(uint32_t ul_id)
-{
+static inline void osc_disable(uint32_t ul_id) {
   switch (ul_id) {
   case OSC_SLCK_32K_RC:
   case OSC_SLCK_32K_XTAL:
@@ -181,8 +177,7 @@ static inline void osc_disable(uint32_t ul_id)
   }
 }
 
-static inline bool osc_is_ready(uint32_t ul_id)
-{
+static inline bool osc_is_ready(uint32_t ul_id) {
   switch (ul_id) {
   case OSC_SLCK_32K_RC:
     return 1;
@@ -202,8 +197,7 @@ static inline bool osc_is_ready(uint32_t ul_id)
   return 0;
 }
 
-static inline uint32_t osc_get_rate(uint32_t ul_id)
-{
+static inline uint32_t osc_get_rate(uint32_t ul_id) {
   switch (ul_id) {
   case OSC_SLCK_32K_RC:
     return OSC_SLCK_32K_RC_HZ;
@@ -241,8 +235,7 @@ static inline uint32_t osc_get_rate(uint32_t ul_id)
  *
  * \param id A number identifying the oscillator to wait for.
  */
-static inline void osc_wait_ready(uint8_t id)
-{
+static inline void osc_wait_ready(uint8_t id) {
   while (!osc_is_ready(id)) {
     /* Do nothing */
   }

Marlin/src/HAL/DUE/usb/pll.h

@@ -113,15 +113,15 @@ struct pll_config {
  * is hidden in this implementation. Use mul as mul effective value.
  */
 static inline void pll_config_init(struct pll_config *p_cfg,
-		enum pll_source e_src, uint32_t ul_div, uint32_t ul_mul)
-{
+    enum pll_source e_src, uint32_t ul_div, uint32_t ul_mul) {
   uint32_t vco_hz;
 
   Assert(e_src < PLL_NR_SOURCES);
 
   if (ul_div == 0 && ul_mul == 0) { /* Must only be true for UTMI PLL */
     p_cfg->ctrl = CKGR_UCKR_UPLLCOUNT(PLL_COUNT);
-	} else { /* PLLA */
+  }
+  else { /* PLLA */
     /* Calculate internal VCO frequency */
     vco_hz = osc_get_rate(e_src) / ul_div;
     Assert(vco_hz >= PLL_INPUT_MIN_HZ);
@@ -142,68 +142,55 @@ static inline void pll_config_init(struct pll_config *p_cfg,
       CONFIG_PLL##pll_id##_DIV,           \
       CONFIG_PLL##pll_id##_MUL)
 
-static inline void pll_config_read(struct pll_config *p_cfg, uint32_t ul_pll_id)
-{
+static inline void pll_config_read(struct pll_config *p_cfg, uint32_t ul_pll_id) {
   Assert(ul_pll_id < NR_PLLS);
-
-	if (ul_pll_id == PLLA_ID) {
-		p_cfg->ctrl = PMC->CKGR_PLLAR;
-	} else {
-		p_cfg->ctrl = PMC->CKGR_UCKR;
-	}
+  p_cfg->ctrl = ul_pll_id == PLLA_ID ? PMC->CKGR_PLLAR : PMC->CKGR_UCKR;
 }
 
-static inline void pll_config_write(const struct pll_config *p_cfg, uint32_t ul_pll_id)
-{
+static inline void pll_config_write(const struct pll_config *p_cfg, uint32_t ul_pll_id) {
   Assert(ul_pll_id < NR_PLLS);
 
   if (ul_pll_id == PLLA_ID) {
     pmc_disable_pllack(); // Always stop PLL first!
     PMC->CKGR_PLLAR = CKGR_PLLAR_ONE | p_cfg->ctrl;
-	} else {
+  }
+  else
     PMC->CKGR_UCKR = p_cfg->ctrl;
 }
-}
 
-static inline void pll_enable(const struct pll_config *p_cfg, uint32_t ul_pll_id)
-{
+static inline void pll_enable(const struct pll_config *p_cfg, uint32_t ul_pll_id) {
   Assert(ul_pll_id < NR_PLLS);
 
   if (ul_pll_id == PLLA_ID) {
     pmc_disable_pllack(); // Always stop PLL first!
     PMC->CKGR_PLLAR = CKGR_PLLAR_ONE | p_cfg->ctrl;
-	} else {
-		PMC->CKGR_UCKR = p_cfg->ctrl | CKGR_UCKR_UPLLEN;
   }
+  else
+    PMC->CKGR_UCKR = p_cfg->ctrl | CKGR_UCKR_UPLLEN;
 }
 
 /**
  * \note This will only disable the selected PLL, not the underlying oscillator (mainck).
  */
-static inline void pll_disable(uint32_t ul_pll_id)
-{
+static inline void pll_disable(uint32_t ul_pll_id) {
   Assert(ul_pll_id < NR_PLLS);
 
-	if (ul_pll_id == PLLA_ID) {
+  if (ul_pll_id == PLLA_ID)
     pmc_disable_pllack();
-	} else {
+  else
     PMC->CKGR_UCKR &= ~CKGR_UCKR_UPLLEN;
 }
-}
 
-static inline uint32_t pll_is_locked(uint32_t ul_pll_id)
-{
+static inline uint32_t pll_is_locked(uint32_t ul_pll_id) {
   Assert(ul_pll_id < NR_PLLS);
 
-	if (ul_pll_id == PLLA_ID) {
+  if (ul_pll_id == PLLA_ID)
     return pmc_is_locked_pllack();
-	} else {
+  else
     return pmc_is_locked_upll();
 }
-}
 
-static inline void pll_enable_source(enum pll_source e_src)
-{
+static inline void pll_enable_source(enum pll_source e_src) {
   switch (e_src) {
   case PLL_SRC_MAINCK_4M_RC:
   case PLL_SRC_MAINCK_8M_RC:
@@ -220,13 +207,11 @@ static inline void pll_enable_source(enum pll_source e_src)
   }
 }
 
-static inline void pll_enable_config_defaults(unsigned int ul_pll_id)
-{
+static inline void pll_enable_config_defaults(unsigned int ul_pll_id) {
   struct pll_config pllcfg;
 
-	if (pll_is_locked(ul_pll_id)) {
-		return; // Pll already running
-	}
+  if (pll_is_locked(ul_pll_id)) return; // Pll already running
+
   switch (ul_pll_id) {
     #ifdef CONFIG_PLL0_SOURCE
       case 0:
@@ -264,13 +249,10 @@ static inline void pll_enable_config_defaults(unsigned int ul_pll_id)
  * \retval STATUS_OK The PLL is now locked.
  * \retval ERR_TIMEOUT Timed out waiting for PLL to become locked.
  */
-static inline int pll_wait_for_lock(unsigned int pll_id)
-{
+static inline int pll_wait_for_lock(unsigned int pll_id) {
   Assert(pll_id < NR_PLLS);
 
-	while (!pll_is_locked(pll_id)) {
-		/* Do nothing */
-	}
+  while (!pll_is_locked(pll_id)) { /* Do nothing */ }
 
   return 0;
 }

Marlin/src/HAL/DUE/usb/preprocessor.h

@@ -51,5 +51,4 @@
 #include "stringz.h"
 #include "mrepeat.h"
 
-
 #endif  // _PREPROCESSOR_H_

Marlin/src/HAL/DUE/usb/sbc_protocol.h

@@ -57,7 +57,6 @@
 #ifndef _SBC_PROTOCOL_H_
 #define _SBC_PROTOCOL_H_
 
-
 /**
  * \ingroup usb_msc_protocol
  * \defgroup usb_sbc_protocol SCSI Block Commands protocol definitions
@@ -87,7 +86,6 @@ enum scsi_sbc_mode {
   SCSI_MS_MODE_CACHING = 0x08,    //!< Caching mode page
 };
 
-
 //! \name SBC-2 Device-Specific Parameter
 //@{
 #define SCSI_MS_SBC_WP              0x80    //!< Write Protected

Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.cpp

@@ -6,7 +6,7 @@
 
 #include "../../../inc/MarlinConfig.h"
 
-#if ENABLED(SDSUPPORT)
+#if HAS_MEDIA
 
 #include "../../../sd/cardreader.h"
 extern "C" {
@@ -18,30 +18,30 @@ extern "C" {
 void sd_mmc_spi_mem_init() {
 }
 
-Ctrl_status sd_mmc_spi_test_unit_ready() {
-  #ifdef DISABLE_DUE_SD_MMC
-    return CTRL_NO_PRESENT;
-  #endif
-  if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isMounted())
-    return CTRL_NO_PRESENT;
-  return CTRL_GOOD;
-}
-
-// NOTE: This function is defined as returning the address of the last block
-// in the card, which is cardSize() - 1
-Ctrl_status sd_mmc_spi_read_capacity(uint32_t *nb_sector) {
-  if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isMounted())
-    return CTRL_NO_PRESENT;
-  *nb_sector = card.diskIODriver()->cardSize() - 1;
-  return CTRL_GOOD;
+inline bool media_ready() {
+  return IS_SD_INSERTED() && !IS_SD_PRINTING() && !IS_SD_FILE_OPEN() && card.isMounted();
 }
 
 bool sd_mmc_spi_unload(bool) { return true; }
 
 bool sd_mmc_spi_wr_protect() { return false; }
 
-bool sd_mmc_spi_removal() {
-  return (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isMounted());
+bool sd_mmc_spi_removal() { return !media_ready(); }
+
+Ctrl_status sd_mmc_spi_test_unit_ready() {
+  #ifdef DISABLE_DUE_SD_MMC
+    return CTRL_NO_PRESENT;
+  #endif
+  if (sd_mmc_spi_removal()) return CTRL_NO_PRESENT;
+  return CTRL_GOOD;
+}
+
+// NOTE: This function is defined as returning the address of the last block
+// in the card, which is cardSize() - 1
+Ctrl_status sd_mmc_spi_read_capacity(uint32_t *nb_sector) {
+  if (sd_mmc_spi_removal()) return CTRL_NO_PRESENT;
+  *nb_sector = card.diskIODriver()->cardSize() - 1;
+  return CTRL_GOOD;
 }
 
 #if ACCESS_USB == true
@@ -61,8 +61,7 @@ Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector) {
   #ifdef DISABLE_DUE_SD_MMC
     return CTRL_NO_PRESENT;
   #endif
-  if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isMounted())
-    return CTRL_NO_PRESENT;
+  if (sd_mmc_spi_removal()) return CTRL_NO_PRESENT;
 
   #ifdef DEBUG_MMC
   {
@@ -101,8 +100,7 @@ Ctrl_status sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector) {
   #ifdef DISABLE_DUE_SD_MMC
     return CTRL_NO_PRESENT;
   #endif
-  if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isMounted())
-    return CTRL_NO_PRESENT;
+  if (sd_mmc_spi_removal()) return CTRL_NO_PRESENT;
 
   #ifdef DEBUG_MMC
   {
@@ -138,5 +136,5 @@ Ctrl_status sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector) {
 
 #endif // ACCESS_USB == true
 
-#endif // SDSUPPORT
+#endif // HAS_MEDIA
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.h

@@ -45,7 +45,6 @@
  * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
  */
 
-
 #ifndef _SD_MMC_SPI_MEM_H_
 #define _SD_MMC_SPI_MEM_H_
 
@@ -63,22 +62,19 @@
   #error sd_mmc_spi_mem.h is #included although SD_MMC_SPI_MEM is disabled
 #endif
 
-
 #include "ctrl_access.h"
 
-
 //_____ D E F I N I T I O N S ______________________________________________
 
 #define   SD_MMC_REMOVED       0
 #define   SD_MMC_INSERTED      1
 #define   SD_MMC_REMOVING      2
 
-
 //---- CONTROL FUNCTIONS ----
 //!
 //! @brief This function initializes the hw/sw resources required to drive the SD_MMC_SPI.
 //!/
-extern void           sd_mmc_spi_mem_init(void);
+void sd_mmc_spi_mem_init();
 
 //!
 //! @brief This function tests the state of the SD_MMC memory and sends it to the Host.
@@ -91,7 +87,7 @@ extern void           sd_mmc_spi_mem_init(void);
 //!   Media not present    ->    CTRL_NO_PRESENT
 //!   Media has changed    ->    CTRL_BUSY
 //!/
-extern Ctrl_status    sd_mmc_spi_test_unit_ready(void);
+Ctrl_status sd_mmc_spi_test_unit_ready();
 
 //!
 //! @brief This function gives the address of the last valid sector.
@@ -102,7 +98,7 @@ extern Ctrl_status    sd_mmc_spi_test_unit_ready(void);
 //!   Media ready          ->  CTRL_GOOD
 //!   Media not present    ->  CTRL_NO_PRESENT
 //!/
-extern Ctrl_status    sd_mmc_spi_read_capacity(uint32_t *nb_sector);
+Ctrl_status sd_mmc_spi_read_capacity(uint32_t *nb_sector);
 
 /*! \brief Unload/Load the SD/MMC card selected
  *
@@ -113,7 +109,7 @@ extern Ctrl_status    sd_mmc_spi_read_capacity(uint32_t *nb_sector);
  *
  * \return \c true if unload/load done success.
  */
-extern bool sd_mmc_spi_unload(bool unload);
+bool sd_mmc_spi_unload(bool unload);
 
 //!
 //! @brief This function returns the write protected status of the memory.
@@ -124,15 +120,14 @@ extern bool sd_mmc_spi_unload(bool unload);
 //!
 //! @return false  -> the memory is not write-protected (always)
 //!/
-extern bool           sd_mmc_spi_wr_protect(void);
+bool sd_mmc_spi_wr_protect();
 
 //!
 //! @brief This function tells if the memory has been removed or not.
 //!
 //! @return false  -> The memory isn't removed
 //!
-extern bool           sd_mmc_spi_removal(void);
-
+bool sd_mmc_spi_removal();
 
 //---- ACCESS DATA FUNCTIONS ----
 
@@ -152,7 +147,7 @@ extern bool           sd_mmc_spi_removal(void);
 //!   It is ready    ->    CTRL_GOOD
 //!   A error occur  ->    CTRL_FAIL
 //!
-extern Ctrl_status    sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector);
+Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector);
 
 //! This function initializes the SD/MMC memory for a write operation
 //!
@@ -166,7 +161,7 @@ extern Ctrl_status    sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector);
 //!   It is ready    ->    CTRL_GOOD
 //!   An error occurs  ->    CTRL_FAIL
 //!
-extern Ctrl_status    sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector);
+Ctrl_status sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector);
 
 #endif // #if ACCESS_USB == true
 

Marlin/src/HAL/DUE/usb/spc_protocol.h

@@ -200,7 +200,6 @@ enum scsi_vpd_page_code {
 
 #define  SCSI_VPD_ID_TYPE_T10       1
 
-
 /* Sense keys */
 enum scsi_sense_key {
   SCSI_SK_NO_SENSE = 0x0,
@@ -272,7 +271,6 @@ struct spc_control_page_info_execpt {
   be32_t report_count;
 };
 
-
 enum scsi_spc_mode_sense_pc {
   SCSI_MS_SENSE_PC_CURRENT = 0,
   SCSI_MS_SENSE_PC_CHANGEABLE = 1,
@@ -280,20 +278,15 @@ enum scsi_spc_mode_sense_pc {
   SCSI_MS_SENSE_PC_SAVED = 3,
 };
 
-
-
-static inline bool scsi_mode_sense_dbd_is_set(const uint8_t * cdb)
-{
+static inline bool scsi_mode_sense_dbd_is_set(const uint8_t * cdb) {
   return (cdb[1] >> 3) & 1;
 }
 
-static inline uint8_t scsi_mode_sense_get_page_code(const uint8_t * cdb)
-{
+static inline uint8_t scsi_mode_sense_get_page_code(const uint8_t * cdb) {
   return cdb[2] & 0x3F;
 }
 
-static inline uint8_t scsi_mode_sense_get_pc(const uint8_t * cdb)
-{
+static inline uint8_t scsi_mode_sense_get_pc(const uint8_t * cdb) {
   return cdb[2] >> 6;
 }
 

Marlin/src/HAL/DUE/usb/sysclk.h

@@ -212,7 +212,6 @@ extern "C" {
   #define CONFIG_USBCLK_DIV
 #endif
 
-
 extern void sysclk_enable_usb(void);
 extern void sysclk_disable_usb(void);
 

Marlin/src/HAL/DUE/usb/udc.c

@@ -83,7 +83,6 @@ static usb_iface_desc_t UDC_DESC_STORAGE *udc_ptr_iface;
 
 //! @}
 
-
 //! \name Internal structure to store the USB device main strings
 //! @{
 

Marlin/src/HAL/DUE/usb/udc.h

@@ -172,8 +172,7 @@ extern "C" {
   }
 \endcode
  */
-static inline bool udc_include_vbus_monitoring(void)
-{
+static inline bool udc_include_vbus_monitoring(void) {
   return udd_include_vbus_monitoring();
 }
 
@@ -192,32 +191,26 @@ void udc_stop(void);
  * then it will attach device when an acceptable Vbus
  * level from the host is detected.
  */
-static inline void udc_attach(void)
-{
+static inline void udc_attach(void) {
   udd_attach();
 }
 
-
 /**
  * \brief Detaches the device from the bus
  *
  * The driver must remove pull-up on USB line D- or D+.
  */
-static inline void udc_detach(void)
-{
+static inline void udc_detach(void) {
   udd_detach();
 }
 
-
 /*! \brief The USB driver sends a resume signal called \e "Upstream Resume"
  * This is authorized only when the remote wakeup feature is enabled by host.
  */
-static inline void udc_remotewakeup(void)
-{
+static inline void udc_remotewakeup(void) {
   udd_send_remotewakeup();
 }
 
-
 /**
  * \brief Returns a pointer on the current interface descriptor
  *
@@ -692,6 +685,4 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc(void);
    } \endcode
  */
 
-
-
 #endif // _UDC_H_

Marlin/src/HAL/DUE/usb/udc_desc.h

@@ -92,8 +92,6 @@ extern "C" {
   #define UDC_BSS(x)    COMPILER_ALIGNED(x)
 #endif
 
-
-
 /**
  * \brief Configuration descriptor and UDI link for one USB speed
  */
@@ -104,7 +102,6 @@ typedef struct {
   udi_api_t UDC_DESC_STORAGE *UDC_DESC_STORAGE * udi_apis;
 } udc_config_speed_t;
 
-
 /**
  * \brief All information about the USB Device
  */

Marlin/src/HAL/DUE/usb/udd.h

@@ -103,20 +103,16 @@ typedef struct {
 extern udd_ctrl_request_t udd_g_ctrlreq;
 
 //! Return true if the setup request \a udd_g_ctrlreq indicates IN data transfer
-#define  Udd_setup_is_in()       \
-      (USB_REQ_DIR_IN == (udd_g_ctrlreq.req.bmRequestType & USB_REQ_DIR_MASK))
+#define  Udd_setup_is_in()     (USB_REQ_DIR_IN == (udd_g_ctrlreq.req.bmRequestType & USB_REQ_DIR_MASK))
 
 //! Return true if the setup request \a udd_g_ctrlreq indicates OUT data transfer
-#define  Udd_setup_is_out()      \
-      (USB_REQ_DIR_OUT == (udd_g_ctrlreq.req.bmRequestType & USB_REQ_DIR_MASK))
+#define  Udd_setup_is_out()    (USB_REQ_DIR_OUT == (udd_g_ctrlreq.req.bmRequestType & USB_REQ_DIR_MASK))
 
 //! Return the type of the SETUP request \a udd_g_ctrlreq. \see usb_reqtype.
-#define  Udd_setup_type()        \
-      (udd_g_ctrlreq.req.bmRequestType & USB_REQ_TYPE_MASK)
+#define  Udd_setup_type()      (udd_g_ctrlreq.req.bmRequestType & USB_REQ_TYPE_MASK)
 
 //! Return the recipient of the SETUP request \a udd_g_ctrlreq. \see usb_recipient
-#define  Udd_setup_recipient()   \
-      (udd_g_ctrlreq.req.bmRequestType & USB_REQ_RECIP_MASK)
+#define  Udd_setup_recipient() (udd_g_ctrlreq.req.bmRequestType & USB_REQ_RECIP_MASK)
 
 /**
  * \brief End of halt callback function type.
@@ -134,8 +130,7 @@ typedef void (*udd_callback_halt_cleared_t)(void);
  * \param status     UDD_EP_TRANSFER_ABORT, if transfer is aborted
  * \param n          number of data transferred
  */
-typedef void (*udd_callback_trans_t) (udd_ep_status_t status,
-		iram_size_t nb_transferred, udd_ep_id_t ep);
+typedef void (*udd_callback_trans_t) (udd_ep_status_t status, iram_size_t nb_transferred, udd_ep_id_t ep);
 
 /**
  * \brief Authorizes the VBUS event
@@ -218,7 +213,6 @@ void udd_send_remotewakeup(void);
  */
 void udd_set_setup_payload( uint8_t *payload, uint16_t payload_size );
 
-
 /**
  * \name Endpoint Management
  *
@@ -239,8 +233,7 @@ void udd_set_setup_payload( uint8_t *payload, uint16_t payload_size );
  *
  * \return \c 1 if the endpoint is enabled, otherwise \c 0.
  */
-bool udd_ep_alloc(udd_ep_id_t ep, uint8_t bmAttributes,
-		uint16_t MaxEndpointSize);
+bool udd_ep_alloc(udd_ep_id_t ep, uint8_t bmAttributes, uint16_t MaxEndpointSize);
 
 /**
  * \brief Disables an endpoint
@@ -294,8 +287,7 @@ bool udd_ep_clear_halt(udd_ep_id_t ep);
  *
  * \return \c 1 if the register is accepted, otherwise \c 0.
  */
-bool udd_ep_wait_stall_clear(udd_ep_id_t ep,
-		udd_callback_halt_cleared_t callback);
+bool udd_ep_wait_stall_clear(udd_ep_id_t ep, udd_callback_halt_cleared_t callback);
 
 /**
  * \brief Allows to receive or send data on an endpoint
@@ -321,9 +313,8 @@ bool udd_ep_wait_stall_clear(udd_ep_id_t ep,
  *
  * \return \c 1 if function was successfully done, otherwise \c 0.
  */
-bool udd_ep_run(udd_ep_id_t ep, bool b_shortpacket,
-		uint8_t * buf, iram_size_t buf_size,
-		udd_callback_trans_t callback);
+bool udd_ep_run(udd_ep_id_t ep, bool b_shortpacket, uint8_t * buf, iram_size_t buf_size, udd_callback_trans_t callback);
+
 /**
  * \brief Aborts transfer on going on endpoint
  *
@@ -339,7 +330,6 @@ void udd_ep_abort(udd_ep_id_t ep);
 
 //@}
 
-
 /**
  * \name High speed test mode management
  *
@@ -352,7 +342,6 @@ void udd_test_mode_se0_nak(void);
 void udd_test_mode_packet(void);
 //@}
 
-
 /**
  * \name UDC callbacks to provide for UDD
  *

Marlin/src/HAL/DUE/usb/udi_cdc.c

@@ -457,7 +457,6 @@ void udi_cdc_data_sof_notify(void)
 #endif
 }
 
-
 // ------------------------
 //------- Internal routines to control serial line
 
@@ -520,7 +519,6 @@ static void udi_cdc_ctrl_state_change(uint8_t port, bool b_set, le16_t bit_mask)
 	udi_cdc_ctrl_state_notify(port, ep_comm);
 }
 
-
 static void udi_cdc_ctrl_state_notify(uint8_t port, udd_ep_id_t ep)
 {
 #if UDI_CDC_PORT_NB == 1 // To optimize code
@@ -542,7 +540,6 @@ static void udi_cdc_ctrl_state_notify(uint8_t port, udd_ep_id_t ep)
 	}
 }
 
-
 static void udi_cdc_serial_state_msg_sent(udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep)
 {
 	uint8_t port;
@@ -578,11 +575,9 @@ static void udi_cdc_serial_state_msg_sent(udd_ep_status_t status, iram_size_t n,
 	udi_cdc_ctrl_state_notify(port, ep);
 }
 
-
 // ------------------------
 //------- Internal routines to process data transfer
 
-
 static bool udi_cdc_rx_start(uint8_t port)
 {
 	irqflags_t flags;
@@ -632,7 +627,6 @@ static bool udi_cdc_rx_start(uint8_t port)
 			udi_cdc_data_received);
 }
 
-
 static void udi_cdc_data_received(udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep)
 {
 	uint8_t buf_sel_trans;
@@ -668,7 +662,6 @@ static void udi_cdc_data_received(udd_ep_status_t status, iram_size_t n, udd_ep_
 	udi_cdc_rx_start(port);
 }
 
-
 static void udi_cdc_data_sent(udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep)
 {
 	uint8_t port;
@@ -700,7 +693,6 @@ static void udi_cdc_data_sent(udd_ep_status_t status, iram_size_t n, udd_ep_id_t
 	udi_cdc_tx_send(port);
 }
 
-
 static void udi_cdc_tx_send(uint8_t port)
 {
 	irqflags_t flags;
@@ -780,11 +772,9 @@ static void udi_cdc_tx_send(uint8_t port)
 			udi_cdc_data_sent);
 }
 
-
 // ------------------------
 //------- Application interface
 
-
 //------- Application interface
 
 void udi_cdc_ctrl_signal_dcd(bool b_set)

Marlin/src/HAL/DUE/usb/udi_cdc.h

@@ -106,7 +106,6 @@ typedef struct {
   usb_ep_desc_t ep_notify;
 } udi_cdc_comm_desc_t;
 
-
 /**
  * \brief Data Class interface descriptor
  *
@@ -121,7 +120,6 @@ typedef struct {
   usb_ep_desc_t ep_out;
 } udi_cdc_data_desc_t;
 
-
 //! CDC communication endpoints size for all speeds
 #define UDI_CDC_COMM_EP_SIZE        64
 //! CDC data endpoints size for FS speed (8B, 16B, 32B, 64B)
@@ -240,7 +238,6 @@ typedef struct {
 #define UDI_CDC_DATA_DESC_6_HS  UDI_CDC_DATA_DESC_HS(6)
 //@}
 
-
 //! Content of CDC IAD interface descriptor for all speeds
 #define UDI_CDC_IAD_DESC(port) { \
    .bLength                      = sizeof(usb_iad_desc_t),\
@@ -627,18 +624,15 @@ iram_size_t udi_cdc_multi_write_buf(uint8_t port, const void* buf, iram_size_t s
  * Add to application C-file:
  * \code
   static bool my_flag_autorize_cdc_transfert = false;
-	 bool my_callback_cdc_enable(void)
-	 {
+  bool my_callback_cdc_enable(void) {
     my_flag_autorize_cdc_transfert = true;
     return true;
   }
-	 void my_callback_cdc_disable(void)
-	 {
+  void my_callback_cdc_disable(void) {
     my_flag_autorize_cdc_transfert = false;
   }
 
-	 void task(void)
-	 {
+  void task(void) {
     if (my_flag_autorize_cdc_transfert) {
       udi_cdc_putc('A');
       udi_cdc_getc();

Marlin/src/HAL/DUE/usb/udi_cdc_desc.c

@@ -51,7 +51,7 @@
 #include "udc_desc.h"
 #include "udi_cdc.h"
 
-#if DISABLED(SDSUPPORT)
+#if !HAS_MEDIA
 
 /**
  * \defgroup udi_cdc_group_single_desc USB device descriptors for a single interface
@@ -109,7 +109,6 @@ UDC_DESC_STORAGE usb_dev_desc_t udc_device_desc = {
   .bNumConfigurations = 1
 };
 
-
 #ifdef USB_DEVICE_HS_SUPPORT
 //! USB Device Qualifier Descriptor for HS
 COMPILER_WORD_ALIGNED
@@ -256,6 +255,6 @@ UDC_DESC_STORAGE udc_config_t udc_config = {
 //@}
 //@}
 
-#endif // SDSUPPORT
+#endif // HAS_MEDIA
 
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/usb/udi_composite_desc.c

@@ -50,7 +50,7 @@
 #include "udd.h"
 #include "udc_desc.h"
 
-#if ENABLED(SDSUPPORT)
+#if HAS_MEDIA
 
 /**
  * \defgroup udi_group_desc Descriptors for a USB Device
@@ -93,7 +93,6 @@ UDC_DESC_STORAGE usb_dev_desc_t udc_device_desc = {
   .bNumConfigurations        = 1
 };
 
-
 #ifdef USB_DEVICE_HS_SUPPORT
 //! USB Device Qualifier Descriptor for HS
 COMPILER_WORD_ALIGNED
@@ -147,7 +146,6 @@ UDC_DESC_STORAGE udc_desc_t udc_desc_hs = {
 };
 #endif
 
-
 /**
  * \name UDC structures which contains all USB Device definitions
  */
@@ -189,4 +187,4 @@ UDC_DESC_STORAGE udc_config_t udc_config = {
 
 #endif // ARDUINO_ARCH_SAM
 
-#endif // SDSUPPORT
+#endif // HAS_MEDIA

Marlin/src/HAL/DUE/usb/udi_msc.c

@@ -57,7 +57,7 @@
 #include "ctrl_access.h"
 #include <string.h>
 
-#if ENABLED(SDSUPPORT)
+#if HAS_MEDIA
 
 #ifndef UDI_MSC_NOTIFY_TRANS_EXT
 #  define UDI_MSC_NOTIFY_TRANS_EXT()
@@ -86,7 +86,6 @@ UDC_DESC_STORAGE udi_api_t udi_api_msc = {
 };
 //@}
 
-
 /**
  * \ingroup udi_msc_group
  * \defgroup udi_msc_group_internal Implementation of UDI MSC
@@ -137,7 +136,6 @@ volatile bool udi_msc_b_reset_trans = true;
 
 //@}
 
-
 /**
  * \name Internal routines
  */
@@ -190,7 +188,6 @@ static void udi_msc_cbw_received(udd_ep_status_t status,
 static bool udi_msc_cbw_validate(uint32_t alloc_len, uint8_t dir_flag);
 //@}
 
-
 /**
  * \name Routines to process small data packet
  */
@@ -217,7 +214,6 @@ static void udi_msc_data_sent(udd_ep_status_t status, iram_size_t nb_sent,
     udd_ep_id_t ep);
 //@}
 
-
 /**
  * \name Routines to process CSW packet
  */
@@ -250,7 +246,6 @@ static void udi_msc_csw_sent(udd_ep_status_t status, iram_size_t nb_sent,
     udd_ep_id_t ep);
 //@}
 
-
 /**
  * \name Routines manage sense data
  */
@@ -307,7 +302,6 @@ static void udi_msc_sense_fail_cdb_invalid(void);
 static void udi_msc_sense_command_invalid(void);
 //@}
 
-
 /**
  * \name Routines manage SCSI Commands
  */
@@ -372,9 +366,7 @@ static void udi_msc_sbc_trans(bool b_read);
 
 //@}
 
-
-bool udi_msc_enable(void)
-{
+bool udi_msc_enable(void) {
   uint8_t lun;
   udi_msc_b_trans_req = false;
   udi_msc_b_cbw_invalid = false;
@@ -397,18 +389,14 @@ bool udi_msc_enable(void)
   return true;
 }
 
-
-void udi_msc_disable(void)
-{
+void udi_msc_disable(void) {
   udi_msc_b_trans_req = false;
   udi_msc_b_ack_trans = true;
   udi_msc_b_reset_trans = true;
   UDI_MSC_DISABLE_EXT();
 }
 
-
-bool udi_msc_setup(void)
-{
+bool udi_msc_setup(void) {
   if (Udd_setup_is_in()) {
     // Requests Interface GET
     if (Udd_setup_type() == USB_REQ_TYPE_CLASS) {
@@ -451,17 +439,14 @@ bool udi_msc_setup(void)
   return false; // Not supported request
 }
 
-uint8_t udi_msc_getsetting(void)
-{
+uint8_t udi_msc_getsetting(void) {
   return 0; // MSC don't have multiple alternate setting
 }
 
-
 // ------------------------
 //------- Routines to process CBW packet
 
-static void udi_msc_cbw_invalid(void)
-{
+static void udi_msc_cbw_invalid(void) {
   if (!udi_msc_b_cbw_invalid)
     return; // Don't re-stall endpoint if error reset by setup
   udd_ep_set_halt(UDI_MSC_EP_OUT);
@@ -469,8 +454,7 @@ static void udi_msc_cbw_invalid(void)
   udd_ep_wait_stall_clear(UDI_MSC_EP_OUT, udi_msc_cbw_invalid);
 }
 
-static void udi_msc_csw_invalid(void)
-{
+static void udi_msc_csw_invalid(void) {
   if (!udi_msc_b_cbw_invalid)
     return; // Don't re-stall endpoint if error reset by setup
   udd_ep_set_halt(UDI_MSC_EP_IN);
@@ -478,8 +462,7 @@ static void udi_msc_csw_invalid(void)
   udd_ep_wait_stall_clear(UDI_MSC_EP_IN, udi_msc_csw_invalid);
 }
 
-static void udi_msc_cbw_wait(void)
-{
+static void udi_msc_cbw_wait(void) {
   // Register buffer and callback on OUT endpoint
   if (!udd_ep_run(UDI_MSC_EP_OUT, true,
           (uint8_t *) & udi_msc_cbw,
@@ -490,10 +473,8 @@ static void udi_msc_cbw_wait(void)
   }
 }
 
-
 static void udi_msc_cbw_received(udd_ep_status_t status,
-    iram_size_t nb_received, udd_ep_id_t ep)
-{
+    iram_size_t nb_received, udd_ep_id_t ep) {
   UNUSED(ep);
   // Check status of transfer
   if (UDD_EP_TRANSFER_OK != status) {
@@ -582,9 +563,7 @@ static void udi_msc_cbw_received(udd_ep_status_t status,
   }
 }
 
-
-static bool udi_msc_cbw_validate(uint32_t alloc_len, uint8_t dir_flag)
-{
+static bool udi_msc_cbw_validate(uint32_t alloc_len, uint8_t dir_flag) {
   /*
    * The following cases should result in a phase error:
    *  - Case  2: Hn < Di
@@ -612,12 +591,10 @@ static bool udi_msc_cbw_validate(uint32_t alloc_len, uint8_t dir_flag)
   return true;
 }
 
-
 // ------------------------
 //------- Routines to process small data packet
 
-static void udi_msc_data_send(uint8_t * buffer, uint8_t buf_size)
-{
+static void udi_msc_data_send(uint8_t * buffer, uint8_t buf_size) {
   // Sends data on IN endpoint
   if (!udd_ep_run(UDI_MSC_EP_IN, true,
           buffer, buf_size, udi_msc_data_sent)) {
@@ -627,10 +604,8 @@ static void udi_msc_data_send(uint8_t * buffer, uint8_t buf_size)
   }
 }
 
-
 static void udi_msc_data_sent(udd_ep_status_t status, iram_size_t nb_sent,
-    udd_ep_id_t ep)
-{
+    udd_ep_id_t ep) {
   UNUSED(ep);
   if (UDD_EP_TRANSFER_OK != status) {
     // Error protocol
@@ -644,12 +619,10 @@ static void udi_msc_data_sent(udd_ep_status_t status, iram_size_t nb_sent,
   udi_msc_csw_process();
 }
 
-
 // ------------------------
 //------- Routines to process CSW packet
 
-static void udi_msc_csw_process(void)
-{
+static void udi_msc_csw_process(void) {
   if (0 != udi_msc_csw.dCSWDataResidue) {
     // Residue not NULL
     // then STALL next request from USB host on corresponding endpoint
@@ -664,9 +637,7 @@ static void udi_msc_csw_process(void)
   udi_msc_csw_send();
 }
 
-
-void udi_msc_csw_send(void)
-{
+void udi_msc_csw_send(void) {
   // Sends CSW on IN endpoint
   if (!udd_ep_run(UDI_MSC_EP_IN, false,
           (uint8_t *) & udi_msc_csw,
@@ -678,10 +649,8 @@ void udi_msc_csw_send(void)
   }
 }
 
-
 static void udi_msc_csw_sent(udd_ep_status_t status, iram_size_t nb_sent,
-    udd_ep_id_t ep)
-{
+    udd_ep_id_t ep) {
   UNUSED(ep);
   UNUSED(status);
   UNUSED(nb_sent);
@@ -690,20 +659,17 @@ static void udi_msc_csw_sent(udd_ep_status_t status, iram_size_t nb_sent,
   udi_msc_cbw_wait();
 }
 
-
 // ------------------------
 //------- Routines manage sense data
 
-static void udi_msc_clear_sense(void)
-{
+static void udi_msc_clear_sense(void) {
   memset((uint8_t*)&udi_msc_sense, 0, sizeof(struct scsi_request_sense_data));
   udi_msc_sense.valid_reponse_code = SCSI_SENSE_VALID | SCSI_SENSE_CURRENT;
   udi_msc_sense.AddSenseLen = SCSI_SENSE_ADDL_LEN(sizeof(udi_msc_sense));
 }
 
 static void udi_msc_sense_fail(uint8_t sense_key, uint16_t add_sense,
-    uint32_t lba)
-{
+    uint32_t lba) {
   udi_msc_clear_sense();
   udi_msc_csw.bCSWStatus = USB_CSW_STATUS_FAIL;
   udi_msc_sense.sense_flag_key = sense_key;
@@ -715,53 +681,39 @@ static void udi_msc_sense_fail(uint8_t sense_key, uint16_t add_sense,
   udi_msc_sense.AddSnsCodeQlfr = add_sense;
 }
 
-static void udi_msc_sense_pass(void)
-{
+static void udi_msc_sense_pass(void) {
   udi_msc_clear_sense();
   udi_msc_csw.bCSWStatus = USB_CSW_STATUS_PASS;
 }
 
-
-static void udi_msc_sense_fail_not_present(void)
-{
+static void udi_msc_sense_fail_not_present(void) {
   udi_msc_sense_fail(SCSI_SK_NOT_READY, SCSI_ASC_MEDIUM_NOT_PRESENT, 0);
 }
 
-static void udi_msc_sense_fail_busy_or_change(void)
-{
-  udi_msc_sense_fail(SCSI_SK_UNIT_ATTENTION,
-      SCSI_ASC_NOT_READY_TO_READY_CHANGE, 0);
+static void udi_msc_sense_fail_busy_or_change(void) {
+  udi_msc_sense_fail(SCSI_SK_UNIT_ATTENTION, SCSI_ASC_NOT_READY_TO_READY_CHANGE, 0);
 }
 
-static void udi_msc_sense_fail_hardware(void)
-{
-  udi_msc_sense_fail(SCSI_SK_HARDWARE_ERROR,
-      SCSI_ASC_NO_ADDITIONAL_SENSE_INFO, 0);
+static void udi_msc_sense_fail_hardware(void) {
+  udi_msc_sense_fail(SCSI_SK_HARDWARE_ERROR, SCSI_ASC_NO_ADDITIONAL_SENSE_INFO, 0);
 }
 
-static void udi_msc_sense_fail_protected(void)
-{
+static void udi_msc_sense_fail_protected(void) {
   udi_msc_sense_fail(SCSI_SK_DATA_PROTECT, SCSI_ASC_WRITE_PROTECTED, 0);
 }
 
-static void udi_msc_sense_fail_cdb_invalid(void)
-{
-  udi_msc_sense_fail(SCSI_SK_ILLEGAL_REQUEST,
-      SCSI_ASC_INVALID_FIELD_IN_CDB, 0);
+static void udi_msc_sense_fail_cdb_invalid(void) {
+  udi_msc_sense_fail(SCSI_SK_ILLEGAL_REQUEST, SCSI_ASC_INVALID_FIELD_IN_CDB, 0);
 }
 
-static void udi_msc_sense_command_invalid(void)
-{
-  udi_msc_sense_fail(SCSI_SK_ILLEGAL_REQUEST,
-      SCSI_ASC_INVALID_COMMAND_OPERATION_CODE, 0);
+static void udi_msc_sense_command_invalid(void) {
+  udi_msc_sense_fail(SCSI_SK_ILLEGAL_REQUEST, SCSI_ASC_INVALID_COMMAND_OPERATION_CODE, 0);
 }
 
-
 // ------------------------
 //------- Routines manage SCSI Commands
 
-static void udi_msc_spc_requestsense(void)
-{
+static void udi_msc_spc_requestsense(void) {
   uint8_t length = udi_msc_cbw.CDB[4];
 
   // Can't send more than sense data length
@@ -774,9 +726,7 @@ static void udi_msc_spc_requestsense(void)
   udi_msc_data_send((uint8_t*)&udi_msc_sense, length);
 }
 
-
-static void udi_msc_spc_inquiry(void)
-{
+static void udi_msc_spc_inquiry(void) {
   uint8_t length, i;
   UDC_DATA(4)
   // Constant inquiry data for all LUNs
@@ -835,9 +785,7 @@ static void udi_msc_spc_inquiry(void)
   udi_msc_data_send((uint8_t *) & udi_msc_inquiry_data, length);
 }
 
-
-static bool udi_msc_spc_testunitready_global(void)
-{
+static bool udi_msc_spc_testunitready_global(void) {
   switch (mem_test_unit_ready(udi_msc_cbw.bCBWLUN)) {
   case CTRL_GOOD:
     return true;  // Don't change sense data
@@ -855,9 +803,7 @@ static bool udi_msc_spc_testunitready_global(void)
   return false;
 }
 
-
-static void udi_msc_spc_testunitready(void)
-{
+static void udi_msc_spc_testunitready(void) {
   if (udi_msc_spc_testunitready_global()) {
     // LUN ready, then update sense data with status pass
     udi_msc_sense_pass();
@@ -866,9 +812,7 @@ static void udi_msc_spc_testunitready(void)
   udi_msc_csw_process();
 }
 
-
-static void udi_msc_spc_mode_sense(bool b_sense10)
-{
+static void udi_msc_spc_mode_sense(bool b_sense10) {
   // Union of all mode sense structures
   union sense_6_10 {
     struct {
@@ -943,9 +887,7 @@ static void udi_msc_spc_mode_sense(bool b_sense10)
   udi_msc_data_send((uint8_t *) & sense, request_lgt);
 }
 
-
-static void udi_msc_spc_prevent_allow_medium_removal(void)
-{
+static void udi_msc_spc_prevent_allow_medium_removal(void) {
   uint8_t prevent = udi_msc_cbw.CDB[4];
   if (0 == prevent) {
     udi_msc_sense_pass();
@@ -955,9 +897,7 @@ static void udi_msc_spc_prevent_allow_medium_removal(void)
   udi_msc_csw_process();
 }
 
-
-static void udi_msc_sbc_start_stop(void)
-{
+static void udi_msc_sbc_start_stop(void) {
   bool start = 0x1 & udi_msc_cbw.CDB[4];
   bool loej = 0x2 & udi_msc_cbw.CDB[4];
   if (loej) {
@@ -967,9 +907,7 @@ static void udi_msc_sbc_start_stop(void)
   udi_msc_csw_process();
 }
 
-
-static void udi_msc_sbc_read_capacity(void)
-{
+static void udi_msc_sbc_read_capacity(void) {
   UDC_BSS(4) static struct sbc_read_capacity10_data udi_msc_capacity;
 
   if (!udi_msc_cbw_validate(sizeof(udi_msc_capacity),
@@ -1003,9 +941,7 @@ static void udi_msc_sbc_read_capacity(void)
       sizeof(udi_msc_capacity));
 }
 
-
-static void udi_msc_sbc_trans(bool b_read)
-{
+static void udi_msc_sbc_trans(bool b_read) {
   uint32_t trans_size;
 
   if (!b_read) {
@@ -1038,9 +974,7 @@ static void udi_msc_sbc_trans(bool b_read)
   UDI_MSC_NOTIFY_TRANS_EXT();
 }
 
-
-bool udi_msc_process_trans(void)
-{
+bool udi_msc_process_trans(void) {
   Ctrl_status status;
 
   if (!udi_msc_b_trans_req)
@@ -1084,10 +1018,8 @@ bool udi_msc_process_trans(void)
   return true;
 }
 
-
 static void udi_msc_trans_ack(udd_ep_status_t status, iram_size_t n,
-    udd_ep_id_t ep)
-{
+    udd_ep_id_t ep) {
   UNUSED(ep);
   UNUSED(n);
   // Update variable to signal the end of transfer
@@ -1095,10 +1027,8 @@ static void udi_msc_trans_ack(udd_ep_status_t status, iram_size_t n,
   udi_msc_b_ack_trans = true;
 }
 
-
 bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size,
-    void (*callback) (udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep))
-{
+    void (*callback) (udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep)) {
   if (!udi_msc_b_ack_trans)
     return false; // No possible, transfer on going
 
@@ -1127,6 +1057,6 @@ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size,
 
 //@}
 
-#endif // SDSUPPORT
+#endif // HAS_MEDIA
 
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/usb/udi_msc.h

@@ -129,7 +129,6 @@ typedef struct {
    }
 //@}
 
-
 /**
  * \ingroup udi_group
  * \defgroup udi_msc_group USB Device Interface (UDI) for Mass Storage Class (MSC)
@@ -170,7 +169,6 @@ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size,
 }
 #endif
 
-
 /**
  * \page udi_msc_quickstart Quick start guide for USB device Mass Storage module (UDI MSC)
  *
@@ -215,18 +213,15 @@ bool udi_msc_trans_block(bool b_read, uint8_t * block, iram_size_t block_size,
  * Add to application C-file:
  * \code
   static bool my_flag_autorize_msc_transfert = false;
-	 bool my_callback_msc_enable(void)
-	 {
+  bool my_callback_msc_enable(void) {
     my_flag_autorize_msc_transfert = true;
     return true;
   }
-	 void my_callback_msc_disable(void)
-	 {
+  void my_callback_msc_disable(void) {
     my_flag_autorize_msc_transfert = false;
   }
 
-	 void task(void)
-	 {
+  void task(void) {
     udi_msc_process_trans();
   }
 \endcode

Marlin/src/HAL/DUE/usb/uotghs_device_due.c

@@ -116,6 +116,23 @@
 //#define dbg_print printf
 #define dbg_print(...)
 
+// Marlin modification: Redefine the otg_freeze_clock and otg_unfreeze_clock macros
+// to add memory barriers to ensure that any accesses to USB registers aren't re-ordered
+// to occur while the clock is frozen.
+#undef otg_freeze_clock
+#undef otg_unfreeze_clock
+
+#define otg_freeze_clock() do { \
+	__DSB(); \
+	Set_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_FRZCLK); \
+} while (0)
+
+#define otg_unfreeze_clock() \
+do { \
+	Clr_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_FRZCLK); \
+	__DSB(); \
+} while (0)
+
 /**
  * \ingroup udd_group
  * \defgroup udd_udphs_group USB On-The-Go High-Speed Port for device mode (UOTGHS)
@@ -276,7 +293,6 @@
 # endif
 #endif
 
-
 /**
  * \name Power management routine.
  */
@@ -293,7 +309,6 @@ static bool udd_b_idle;
 //! State of sleep manager
 static bool udd_b_sleep_initialized = false;
 
-
 /*! \brief Authorize or not the CPU powerdown mode
  *
  * \param b_enable true to authorize idle mode
@@ -321,7 +336,6 @@ static void udd_sleep_mode(bool b_idle)
 
 //@}
 
-
 /**
  * \name Control endpoint low level management routine.
  *
@@ -393,7 +407,6 @@ static void udd_ctrl_send_zlp_out(void);
 //! \brief Call callback associated to setup request
 static void udd_ctrl_endofrequest(void);
 
-
 /**
  * \brief Main interrupt routine for control endpoint
  *
@@ -405,7 +418,6 @@ static bool udd_ctrl_interrupt(void);
 
 //@}
 
-
 /**
  * \name Management of bulk/interrupt/isochronous endpoints
  *
@@ -443,7 +455,6 @@ typedef struct {
 	uint8_t stall_requested:1;
 } udd_ep_job_t;
 
-
 //! Array to register a job on bulk/interrupt/isochronous endpoint
 static udd_ep_job_t udd_ep_job[USB_DEVICE_MAX_EP];
 
@@ -505,7 +516,6 @@ static bool udd_ep_interrupt(void);
 #endif // (0!=USB_DEVICE_MAX_EP)
 //@}
 
-
 // ------------------------
 //--- INTERNAL ROUTINES TO MANAGED GLOBAL EVENTS
 
@@ -611,6 +621,18 @@ ISR(UDD_USB_INT_FUN)
 		// The wakeup interrupt is automatic acked when a suspend occur
 		udd_disable_wake_up_interrupt();
 		udd_enable_suspend_interrupt();
+
+		// Marlin modification: The RESET, SOF, and MSOF interrupts were previously
+		// enabled in udd_attach, which caused a race condition where they could
+		// be raised and unclearable with the clock is frozen. They are now
+		// enabled here, after the clock has been unfrozen in response to the wake
+		// interrupt.
+		udd_enable_reset_interrupt();
+		udd_enable_sof_interrupt();
+#ifdef USB_DEVICE_HS_SUPPORT
+		udd_enable_msof_interrupt();
+#endif
+
 		udd_sleep_mode(true); // Enter in IDLE mode
 #ifdef UDC_RESUME_EVENT
 		UDC_RESUME_EVENT();
@@ -642,13 +664,11 @@ udd_interrupt_sof_end:
 	return;
 }
 
-
 bool udd_include_vbus_monitoring(void)
 {
 	return true;
 }
 
-
 void udd_enable(void)
 {
 	irqflags_t flags;
@@ -735,7 +755,6 @@ void udd_enable(void)
 	cpu_irq_restore(flags);
 }
 
-
 void udd_disable(void)
 {
 	irqflags_t flags;
@@ -776,6 +795,27 @@ void udd_disable(void)
 	cpu_irq_restore(flags);
 }
 
+// Marlin modification: The original implementation did not use a memory
+// barrier between disabling and clearing interrupts. This sometimes
+// allowed interrupts to remain raised and unclearable after the clock
+// was frozen. This helper was added to ensure that memory barriers
+// are used consistently from all places where interrupts are disabled.
+static void disable_and_ack_sync_interrupts()
+{
+	// Disable USB line events
+	udd_disable_reset_interrupt();
+	udd_disable_sof_interrupt();
+#ifdef USB_DEVICE_HS_SUPPORT
+	udd_disable_msof_interrupt();
+#endif
+	__DSB();
+	udd_ack_reset();
+	udd_ack_sof();
+#ifdef USB_DEVICE_HS_SUPPORT
+	udd_ack_msof();
+#endif
+	__DSB();
+}
 
 void udd_attach(void)
 {
@@ -796,17 +836,16 @@ void udd_attach(void)
 	udd_attach_device();
 
 	// Enable USB line events
-	udd_enable_reset_interrupt();
 	udd_enable_suspend_interrupt();
 	udd_enable_wake_up_interrupt();
-	udd_enable_sof_interrupt();
-#ifdef USB_DEVICE_HS_SUPPORT
-	udd_enable_msof_interrupt();
-#endif
-	// Reset following interrupts flag
-	udd_ack_reset();
-	udd_ack_sof();
-	udd_ack_msof();
+
+	// Marlin modification: The RESET, SOF, and MSOF interrupts were previously
+	// enabled here, which caused a race condition where they could be raised
+	// and unclearable with the clock is frozen. They are now enabled in the
+	// wake interrupt handler, after the clock has been unfrozen. They are now
+	// explicitly disabled here to ensure that they cannot be raised before
+	// the clock is frozen.
+	disable_and_ack_sync_interrupts();
 
 	// The first suspend interrupt must be forced
 	// The first suspend interrupt is not detected else raise it
@@ -817,18 +856,22 @@ void udd_attach(void)
 	cpu_irq_restore(flags);
 }
 
-
 void udd_detach(void)
 {
 	otg_unfreeze_clock();
 
 	// Detach device from the bus
 	udd_detach_device();
+
+	// Marlin modification: Added the explicit disabling of the RESET, SOF, and
+	// MSOF interrupts here, to ensure that they cannot be raised after the
+	// clock is frozen.
+	disable_and_ack_sync_interrupts();
+
 	otg_freeze_clock();
 	udd_sleep_mode(false);
 }
 
-
 bool udd_is_high_speed(void)
 {
 #ifdef USB_DEVICE_HS_SUPPORT
@@ -838,7 +881,6 @@ bool udd_is_high_speed(void)
 #endif
 }
 
-
 void udd_set_address(uint8_t address)
 {
 	udd_disable_address();
@@ -846,13 +888,11 @@ void udd_set_address(uint8_t address)
 	udd_enable_address();
 }
 
-
 uint8_t udd_getaddress(void)
 {
 	return udd_get_configured_address();
 }
 
-
 uint16_t udd_get_frame_number(void)
 {
 	return udd_frame_number();
@@ -875,14 +915,12 @@ void udd_send_remotewakeup(void)
 	}
 }
 
-
 void udd_set_setup_payload(uint8_t *payload, uint16_t payload_size)
 {
 	udd_g_ctrlreq.payload = payload;
 	udd_g_ctrlreq.payload_size = payload_size;
 }
 
-
 #if (0 != USB_DEVICE_MAX_EP)
 bool udd_ep_alloc(udd_ep_id_t ep, uint8_t bmAttributes,
 		uint16_t MaxEndpointSize)
@@ -1006,7 +1044,6 @@ bool udd_ep_alloc(udd_ep_id_t ep, uint8_t bmAttributes,
 	return true;
 }
 
-
 void udd_ep_free(udd_ep_id_t ep)
 {
 	uint8_t ep_index = ep & USB_EP_ADDR_MASK;
@@ -1019,14 +1056,12 @@ void udd_ep_free(udd_ep_id_t ep)
 	udd_ep_job[ep_index - 1].stall_requested = false;
 }
 
-
 bool udd_ep_is_halted(udd_ep_id_t ep)
 {
 	uint8_t ep_index = ep & USB_EP_ADDR_MASK;
 	return Is_udd_endpoint_stall_requested(ep_index);
 }
 
-
 bool udd_ep_set_halt(udd_ep_id_t ep)
 {
 	uint8_t ep_index = ep & USB_EP_ADDR_MASK;
@@ -1067,7 +1102,6 @@ bool udd_ep_set_halt(udd_ep_id_t ep)
 	return true;
 }
 
-
 bool udd_ep_clear_halt(udd_ep_id_t ep)
 {
 	uint8_t ep_index = ep & USB_EP_ADDR_MASK;
@@ -1108,7 +1142,6 @@ bool udd_ep_clear_halt(udd_ep_id_t ep)
 	return true;
 }
 
-
 bool udd_ep_run(udd_ep_id_t ep, bool b_shortpacket,
 		uint8_t * buf, iram_size_t buf_size,
 		udd_callback_trans_t callback)
@@ -1175,7 +1208,6 @@ bool udd_ep_run(udd_ep_id_t ep, bool b_shortpacket,
 #endif
 }
 
-
 void udd_ep_abort(udd_ep_id_t ep)
 {
 	uint8_t ep_index = ep & USB_EP_ADDR_MASK;
@@ -1204,7 +1236,6 @@ void udd_ep_abort(udd_ep_id_t ep)
 	udd_ep_abort_job(ep);
 }
 
-
 bool udd_ep_wait_stall_clear(udd_ep_id_t ep,
 		udd_callback_halt_cleared_t callback)
 {
@@ -1239,7 +1270,6 @@ bool udd_ep_wait_stall_clear(udd_ep_id_t ep,
 }
 #endif // (0 != USB_DEVICE_MAX_EP)
 
-
 #ifdef USB_DEVICE_HS_SUPPORT
 
 void udd_test_mode_j(void)
@@ -1248,20 +1278,17 @@ void udd_test_mode_j(void)
 	udd_enable_hs_test_mode_j();
 }
 
-
 void udd_test_mode_k(void)
 {
 	udd_enable_hs_test_mode();
 	udd_enable_hs_test_mode_k();
 }
 
-
 void udd_test_mode_se0_nak(void)
 {
 	udd_enable_hs_test_mode();
 }
 
-
 void udd_test_mode_packet(void)
 {
 	uint8_t i;
@@ -1305,8 +1332,6 @@ void udd_test_mode_packet(void)
 }
 #endif // USB_DEVICE_HS_SUPPORT
 
-
-
 // ------------------------
 //--- INTERNAL ROUTINES TO MANAGED THE CONTROL ENDPOINT
 
@@ -1356,7 +1381,6 @@ static void udd_ctrl_init(void)
 	udd_ep_control_state = UDD_EPCTRL_SETUP;
 }
 
-
 static void udd_ctrl_setup_received(void)
 {
 	irqflags_t flags;
@@ -1418,7 +1442,6 @@ static void udd_ctrl_setup_received(void)
 	}
 }
 
-
 static void udd_ctrl_in_sent(void)
 {
 	static bool b_shortpacket = false;
@@ -1502,7 +1525,6 @@ static void udd_ctrl_in_sent(void)
 	cpu_irq_restore(flags);
 }
 
-
 static void udd_ctrl_out_received(void)
 {
 	irqflags_t flags;
@@ -1593,7 +1615,6 @@ static void udd_ctrl_out_received(void)
 	cpu_irq_restore(flags);
 }
 
-
 static void udd_ctrl_underflow(void)
 {
 	if (Is_udd_out_received(0))
@@ -1610,7 +1631,6 @@ static void udd_ctrl_underflow(void)
 	}
 }
 
-
 static void udd_ctrl_overflow(void)
 {
 	if (Is_udd_in_send(0))
@@ -1626,7 +1646,6 @@ static void udd_ctrl_overflow(void)
 	}
 }
 
-
 static void udd_ctrl_stall_data(void)
 {
 	// Stall all packets on IN & OUT control endpoint
@@ -1634,7 +1653,6 @@ static void udd_ctrl_stall_data(void)
 	udd_enable_stall_handshake(0);
 }
 
-
 static void udd_ctrl_send_zlp_in(void)
 {
 	irqflags_t flags;
@@ -1652,7 +1670,6 @@ static void udd_ctrl_send_zlp_in(void)
 	cpu_irq_restore(flags);
 }
 
-
 static void udd_ctrl_send_zlp_out(void)
 {
 	irqflags_t flags;
@@ -1668,7 +1685,6 @@ static void udd_ctrl_send_zlp_out(void)
 	cpu_irq_restore(flags);
 }
 
-
 static void udd_ctrl_endofrequest(void)
 {
 	// If a callback is registered then call it
@@ -1677,7 +1693,6 @@ static void udd_ctrl_endofrequest(void)
 	}
 }
 
-
 static bool udd_ctrl_interrupt(void)
 {
 
@@ -1728,7 +1743,6 @@ static bool udd_ctrl_interrupt(void)
 	return false;
 }
 
-
 // ------------------------
 //--- INTERNAL ROUTINES TO MANAGED THE BULK/INTERRUPT/ISOCHRONOUS ENDPOINTS
 
@@ -1743,7 +1757,6 @@ static void udd_ep_job_table_reset(void)
 	}
 }
 
-
 static void udd_ep_job_table_kill(void)
 {
 	uint8_t i;
@@ -1754,7 +1767,6 @@ static void udd_ep_job_table_kill(void)
 	}
 }
 
-
 static void udd_ep_abort_job(udd_ep_id_t ep)
 {
 	ep &= USB_EP_ADDR_MASK;
@@ -1763,7 +1775,6 @@ static void udd_ep_abort_job(udd_ep_id_t ep)
 	udd_ep_finish_job(&udd_ep_job[ep - 1], true, ep);
 }
 
-
 static void udd_ep_finish_job(udd_ep_job_t * ptr_job, bool b_abort, uint8_t ep_num)
 {
 	if (ptr_job->busy == false) {
@@ -1834,7 +1845,6 @@ static void udd_ep_trans_done(udd_ep_id_t ep)
 		udd_dma_ctrl |= UOTGHS_DEVDMACONTROL_END_BUFFIT |
 				UOTGHS_DEVDMACONTROL_CHANN_ENB;
 
-
 		// Disable IRQs to have a short sequence
 		// between read of EOT_STA and DMA enable
 		flags = cpu_irq_save();
@@ -2043,6 +2053,12 @@ static bool udd_ep_interrupt(void)
 				dbg_print("I ");
 				udd_disable_in_send_interrupt(ep);
 				// One bank is free then send a ZLP
+
+				// Marlin modification: Add a barrier to ensure in_send is disabled
+				// before it is cleared. This was not an observed problem, but
+				// other interrupts were seen to misbehave without this barrier.
+				__DSB();
+
 				udd_ack_in_send(ep);
 				udd_ack_fifocon(ep);
 				udd_ep_finish_job(ptr_job, false, ep);

Marlin/src/HAL/DUE/usb/uotghs_device_due.h

@@ -129,7 +129,6 @@ extern "C" {
 #define Is_udd_vbus_transition()          (Tst_bits(UOTGHS->UOTGHS_SR, UOTGHS_SR_VBUSTI))
 //! @}
 
-
 //! @name UOTGHS device attach control
 //! These macros manage the UOTGHS Device attach.
 //! @{
@@ -141,7 +140,6 @@ extern "C" {
 #define Is_udd_detached()                 (Tst_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_DETACH))
 //! @}
 
-
 //! @name UOTGHS device bus events control
 //! These macros manage the UOTGHS Device bus events.
 //! @{
@@ -246,7 +244,6 @@ extern "C" {
 #define udd_get_configured_address()              (Rd_bitfield(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_UADD_Msk))
 //! @}
 
-
 //! @name UOTGHS Device endpoint drivers
 //! These macros manage the common features of the endpoints.
 //! @{
@@ -330,7 +327,6 @@ extern "C" {
 #define udd_data_toggle(ep)                       (Rd_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_DTSEQ_Msk))
 //! @}
 
-
 //! @name UOTGHS Device control endpoint
 //! These macros control the endpoints.
 //! @{
@@ -530,7 +526,6 @@ extern "C" {
   //! Tests if IN sending interrupt is enabled
 #define Is_udd_in_send_interrupt_enabled(ep)      (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_TXINE))
 
-
   //! Get 64-, 32-, 16- or 8-bit access to FIFO data register of selected endpoint.
   //! @param ep Endpoint of which to access FIFO data register
   //! @param scale Data scale in bits: 64, 32, 16 or 8
@@ -652,7 +647,6 @@ typedef struct {
 //! @}
 //! @}
 
-
 /// @cond 0
 /**INDENT-OFF**/
 #ifdef __cplusplus

Marlin/src/HAL/DUE/usb/uotghs_otg.h

@@ -53,7 +53,6 @@
 extern "C" {
 #endif
 
-
 //! \ingroup usb_group
 //! \defgroup otg_group UOTGHS OTG Driver
 //! UOTGHS low-level driver for OTG features
@@ -74,7 +73,6 @@ bool otg_dual_enable(void);
  */
 void otg_dual_disable(void);
 
-
 //! @name UOTGHS OTG ID pin management
 //! The ID pin come from the USB OTG connector (A and B receptable) and
 //! allows to select the USB mode host or device.
@@ -166,7 +164,6 @@ void otg_dual_disable(void);
     Clr_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_UNLOCK),\
     Rd_bitfield(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_TIMVALUE_Msk))
 
-
   //! Get the dual-role device state of the internal USB finite state machine of the UOTGHS controller
 #define otg_get_fsm_drd_state()             (Rd_bitfield(UOTGHS->UOTGHS_FSM, UOTGHS_FSM_DRDSTATE_Msk))
 #define Is_otg_a_suspend()                  (4==otg_get_fsm_drd_state())

Marlin/src/HAL/DUE/usb/usb_protocol.h

@@ -374,7 +374,6 @@ typedef struct {
   uint8_t bNumDeviceCaps;
 } usb_dev_bos_desc_t;
 
-
 /**
  * \brief USB Device Capabilities - USB 2.0 Extension Descriptor structure
  *
@@ -411,7 +410,6 @@ typedef struct {
   uint8_t iFunction;        //!< Index of string descriptor
 } usb_association_desc_t;
 
-
 /**
  * \brief Standard USB configuration descriptor structure
  */
@@ -426,7 +424,6 @@ typedef struct {
   uint8_t bMaxPower;
 } usb_conf_desc_t;
 
-
 #define  USB_CONFIG_ATTR_MUST_SET         (1 << 7) //!< Must always be set
 #define  USB_CONFIG_ATTR_BUS_POWERED      (0 << 6) //!< Bus-powered
 #define  USB_CONFIG_ATTR_SELF_POWERED     (1 << 6) //!< Self-powered
@@ -475,7 +472,6 @@ typedef struct {
   uint8_t bInterval;
 } usb_ep_desc_t;
 
-
 /**
  * \brief A standard USB string descriptor structure
  */

Marlin/src/HAL/DUE/usb/usb_protocol_cdc.h

@@ -168,7 +168,6 @@ COMPILER_PACK_SET(1)
 //! \name USB CDC Descriptors
 //@{
 
-
 //! CDC Header Functional Descriptor
 typedef struct {
   uint8_t bFunctionLength;
@@ -203,7 +202,6 @@ typedef struct {
   uint8_t bSlaveInterface0;
 } usb_cdc_union_desc_t;
 
-
 //! \name USB CDC Call Management Capabilities
 //@{
 //! Device handles call management itself
@@ -278,7 +276,6 @@ typedef struct {
 //@}
 //@}
 
-
 //! \name USB CDC notification message
 //@{
 

Marlin/src/HAL/DUE/usb/usb_protocol_msc.h

@@ -47,7 +47,6 @@
 #ifndef _USB_PROTOCOL_MSC_H_
 #define _USB_PROTOCOL_MSC_H_
 
-
 /**
  * \ingroup usb_protocol_group
  * \defgroup usb_msc_protocol USB Mass Storage Class (MSC) protocol definitions
@@ -89,7 +88,6 @@
 #define MSC_PROTOCOL_BULK           0x50  //!< Bulk-only
 //@}
 
-
 /**
  * \brief MSC USB requests (bRequest)
  */
@@ -98,7 +96,6 @@ enum usb_reqid_msc {
   USB_REQ_MSC_GET_MAX_LUN = 0xFE  //!< Get Max LUN
 };
 
-
 COMPILER_PACK_SET(1)
 
 /**
@@ -122,7 +119,6 @@ struct usb_msc_cbw {
 #define USB_CBW_LEN_MASK            0x1F  //!< Valid bits in bCBWCBLength
 //@}
 
-
 /**
  * \name A Command Status Wrapper (CSW).
  */