Correctly measured Extruder Steps

This reverts commit 527fbf1699.

.github/FUNDING.yml

@@ -0,0 +1 @@
+custom: ["https://paypal.me/oliverkoester"]

.github/ISSUE_TEMPLATE/bug_report.md

@@ -0,0 +1,40 @@
+---
+name: Bug report
+about: Report a bug in Knutwurst's Marlin Firmware
+title: "[BUG] (short description)"
+labels: ''
+assignees: ''
+
+---
+
+<!--
+
+------ PLEASE USE THIS TEMPLATE! --------
+
+Have you read all Wiki articles in cluding the FAQ?
+https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki
+
+Do you want to ask a question? Are you looking for support? Please don't post here. Instead please use one of the support links at https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/issues/new/choose
+
+-->
+
+### Bug Description
+
+<!-- Description of the bug -->
+
+### Steps to Reproduce
+
+<!-- Please describe the steps needed to reproduce the issue -->
+
+1. [First Step]
+2. [Second Step]
+3. [and so on...]
+
+**Expected behavior:** [What you expect to happen]
+
+**Actual behavior:** [What actually happens]
+
+#### Additional Information
+
+* Provide pictures or links to videos that clearly demonstrate the issue.
+* See [How Can I Contribute](#how-can-i-contribute) for additional guidelines.

.github/ISSUE_TEMPLATE/config.yml

@@ -0,0 +1,14 @@
+blank_issues_enabled: false
+contact_links:
+  - name: Knutwurst Wiki
+    url: https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki
+    about: Lots of documentation on installing and using Knutwurst Firmware.
+  - name: FAQ
+    url: https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/FAQ-(english)
+    about: Please look for your question here
+  - name: Official Facebook Group (german)
+    url: https://www.facebook.com/groups/3094090037303577
+    about: If you need general help (english/german), please ask your question here
+  - name: Knuwturst Videos on YouTube
+    url: https://www.youtube.com/results?search_query=knutwurst+firmware
+    about: Tutorials and more from Knutwurst users all around the world. Great for new users!

.github/ISSUE_TEMPLATE/feature_request.md

@@ -0,0 +1,36 @@
+---
+name: Feature request
+about: Request a Feature
+title: "[FR] (feature request title)"
+labels: ''
+assignees: ''
+
+---
+
+<!--
+
+------ PLEASE USE THIS TEMPLATE! --------
+
+Have you read all Wiki articles in cluding the FAQ?
+https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki
+
+Do you want to ask a question? Are you looking for support? Please don't post here. Instead please use one of the support links at https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/issues/new/choose
+
+-->
+
+
+### Description
+
+<!-- Description of the requested feature -->
+
+### Feature Workflow
+
+<!-- Please describe the feature's behavior, user interaction, etc. -->
+
+1. [First Action]
+2. [Second Action]
+3. [and so on...]
+
+#### Additional Information
+
+* Provide pictures or links that demonstrate a similar feature or concept.

.github/issue_template.md

@@ -0,0 +1,11 @@
+# NO SUPPORT REQUESTS PLEASE
+
+Do you want to ask a question? Are you looking for support? Please don't post here. Support Requests posted here will be automatically closed!
+
+Instead use one of the following options:
+
+- The Marlin Firmware forum at https://reprap.org/forum/list.php?415
+- The MarlinFirmware Facebook Group at https://www.facebook.com/groups/1049718498464482/
+- The MarlinFirmware Discord Server at https://discord.gg/n5NJ59y.
+
+Before filing an issue be sure to test the latest "bugfix" branch to see whether the issue is already addressed.

.github/lock.yml

@@ -0,0 +1,40 @@
+#
+# Configuration for Lock Threads - https://github.com/dessant/lock-threads-app
+#
+
+# Number of days of inactivity before a closed issue or pull request is locked
+daysUntilLock: 180
+
+# Skip issues and pull requests created before a given timestamp. Timestamp must
+# follow ISO 8601 (`YYYY-MM-DD`). Set to `false` to disable
+skipCreatedBefore: false
+
+# Issues and pull requests with these labels will be ignored. Set to `[]` to disable
+exemptLabels: [ 'no-locking' ]
+
+# Label to add before locking, such as `outdated`. Set to `false` to disable
+lockLabel: false
+
+# Comment to post before locking. Set to `false` to disable
+lockComment: >
+  This thread has been automatically locked since there has not been
+  any recent activity after it was closed. Please open a new issue for
+  related bugs.
+
+# Assign `resolved` as the reason for locking. Set to `false` to disable
+setLockReason: true
+
+# Limit to only `issues` or `pulls`
+# only: issues
+
+# Optionally, specify configuration settings just for `issues` or `pulls`
+# issues:
+#   exemptLabels:
+#     - help-wanted
+#   lockLabel: outdated
+
+# pulls:
+#   daysUntilLock: 30
+
+# Repository to extend settings from
+# _extends: repo

.github/pull_request_template.md

@@ -0,0 +1,23 @@
+### Requirements
+
+* Filling out this template is required. Pull Requests without a clear description may be closed at the maintainers' discretion.
+
+### Description
+
+<!--
+
+We must be able to understand your proposed change from this description. If we can't understand what the code will do from this description, the Pull Request may be closed at the maintainers' discretion. Keep in mind that the maintainer reviewing this PR may not be familiar with or have worked with the code recently, so please walk us through the concepts.
+
+-->
+
+### Benefits
+
+<!-- What does this fix or improve? -->
+
+### Configurations
+
+<!-- Attach any Configuration.h, Configuration_adv.h, or platformio.ini files needed to compile/test your Pull Request. -->
+
+### Related Issues
+
+<!-- Whether this fixes a bug or fulfills a feature request, please list any related Issues here. -->

.github/workflows/build-all.yml

@@ -0,0 +1,119 @@
+name: Build All Firmware Variants
+
+on:
+  #pull_request:
+  #  branches:
+  #  - master
+  #  paths-ignore:
+  #  - config/**
+  #  - data/**
+  #  - docs/**
+  #  - '**/*.md'
+  push:
+    branches:
+    - master
+    paths-ignore:
+    - config/**
+    - data/**
+    - docs/**
+    - '**/*.md'
+
+jobs:
+  build:
+    name: Build
+    if: github.repository == 'knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S'
+
+    runs-on: ubuntu-latest
+
+    strategy:
+       matrix:
+         platform:
+         # Knutwurst Base Environments
+         - MEGA_1G
+         - MEGA_1G_TMC
+         - MEGA_1G_BLT_10
+         - MEGA_1G_BLT_11
+         - MEGA_1G_TMC_BLT_10
+         - MEGA_1G_TMC_BLT_11
+         - MEGA
+         - MEGA_TMC
+         - MEGA_BLT_10
+         - MEGA_BLT_11
+         - MEGA_TMC_BLT_10
+         - MEGA_TMC_BLT_11
+         - MEGA_S
+         - MEGA_S_TMC
+         - MEGA_S_BLT_10
+         - MEGA_S_BLT_11
+         - MEGA_S_TMC_BLT_10
+         - MEGA_S_TMC_BLT_11
+         - MEGA_S_DGUS
+         - MEGA_S_DGUS_TMC
+         - MEGA_S_DGUS_BLT_10
+         - MEGA_S_DGUS_BLT_11
+         - MEGA_S_DGUS_TMC_BLT_10
+         - MEGA_S_DGUS_TMC_BLT_11
+         - MEGA_X
+         - MEGA_X_TMC
+         - MEGA_X_BLT_10
+         - MEGA_X_BLT_11
+         - MEGA_X_TMC_BLT_10
+         - MEGA_X_TMC_BLT_11
+         - MEGA_X_DGUS
+         - MEGA_X_DGUS_TMC
+         - MEGA_X_DGUS_BLT_10
+         - MEGA_X_DGUS_BLT_11
+         - MEGA_X_DGUS_TMC_BLT_10
+         - MEGA_X_DGUS_TMC_BLT_11
+         - MEGA_P
+         - MEGA_P_TMC
+         - MEGA_P_BLT_10
+         - MEGA_P_BLT_11
+         - MEGA_P_TMC_BLT_10
+         - MEGA_P_TMC_BLT_11
+         - CHIRON
+         - CHIRON_TMC
+         - CHIRON_DGUS
+         - CHIRON_DGUS_TMC
+
+    steps:
+
+    - name: Setup Python 3.7
+      uses: actions/setup-python@v1
+      with:
+        python-version: '3.7' # Version range or exact version of a Python version to use, using semvers version range syntax.
+        architecture: 'x64' # optional x64 or x86. Defaults to x64 if not specified
+
+    - name: Install PlatformIO
+      run: |
+        pip install -U https://github.com/platformio/platformio-core/archive/develop.zip
+        platformio update
+
+    - name: Install PlatformIO dependencies
+      run: |
+        python -m pip install --upgrade pip
+        pip install platformio
+    
+    - uses: actions/checkout@master
+
+    - name: Compile Firmware with PlatformIO
+      run: platformio run --environment ${{ matrix.platform }}
+
+    - name: Rename Output Files
+      run: |
+        CUSTOM_BUILD_VERSION=$(egrep -o "([0-9]{1,}\.)+[a-zA-Z0-9_.-]{1,}" Marlin/src/inc/Version.h -m2 | tail -n1) && \
+        mv .pio/build/${{ matrix.platform }}/firmware.hex .pio/build/${{ matrix.platform }}/${{ matrix.platform }}_v$CUSTOM_BUILD_VERSION.hex
+
+    #- name: Archive artifacts into single Files
+    #  uses: actions/upload-artifact@master
+    #  with:
+    #    name: Knutwurst_${{ matrix.platform }}
+    #    path: |
+    #     .pio/build/${{ matrix.platform }}/${{ matrix.platform }}_v*.hex
+
+    - name: Archive all artifacts into one ZIP file
+      uses: actions/upload-artifact@master
+      with:
+        name: Knuwurst-all-in-one-${{github.sha}}
+        path: |
+         .pio/build/${{ matrix.platform }}/${{ matrix.platform }}_v*.hex

.github/workflows/close-stale.yml

@@ -0,0 +1,27 @@
+#
+# close-stale.yml
+# Close open issues after a period of inactivity
+#
+
+name: Close Stale Issues
+
+on:
+  schedule:
+  - cron: "22 1 * * *"
+
+jobs:
+  stale:
+    name: Close Stale Issues
+    if: github.repository == 'knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S'
+
+    runs-on: ubuntu-latest
+
+    steps:
+    - uses: actions/stale@v3
+      with:
+        repo-token: ${{ secrets.GITHUB_TOKEN }}
+        stale-issue-message: 'This issue is stale because it has been open 30 days with no activity. Remove stale label / comment or this will be closed in 5 days.'
+        days-before-stale: 30
+        days-before-close: 5
+        stale-issue-label: 'stale-closing-soon'
+        exempt-issue-labels: 'T: Feature Request'

.github/workflows/lock-closed.yml

@@ -0,0 +1,32 @@
+#
+# lock-closed.yml
+# Lock closed issues after a period of inactivity
+#
+
+name: Lock Closed Issues
+
+on:
+  schedule:
+    - cron: '0 1/13 * * *'
+
+jobs:
+  lock:
+    name: Lock Closed Issues
+    if: github.repository == 'knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S'
+
+    runs-on: ubuntu-latest
+
+    steps:
+    - uses: dessant/lock-threads@v2
+      with:
+        github-token: ${{ github.token }}
+        process-only: 'issues'
+        issue-lock-inactive-days: '60'
+        issue-exclude-created-before: ''
+        issue-exclude-labels: 'no-locking'
+        issue-lock-labels: ''
+        issue-lock-comment: >
+          This issue has been automatically locked since there
+          has not been any recent activity after it was closed.
+          Please open a new issue for related bugs.
+        issue-lock-reason: ''

.github/workflows/nightly_cleanup.yml

@@ -0,0 +1,13 @@
+name: 'nightly artifacts cleanup'
+on:
+  schedule:
+    - cron: '0 1 * * *' # every night at 1 am UTC
+
+jobs:
+  delete-artifacts:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: kolpav/purge-artifacts-action@v1
+        with:
+          token: ${{ secrets.GITHUB_TOKEN }}
+          expire-in: 30days # Set this to 0 to delete all artifacts

.github/workflows/unlock-reopened.yml

@@ -0,0 +1,22 @@
+#
+# unlock-reopened.yml
+# Unlock an issue whenever it is re-opened
+#
+
+name: "Unlock reopened issue"
+
+on:
+  issues:
+    types: [reopened]
+
+jobs:
+  unlock:
+    name: Unlock Reopened
+    if: github.repository == 'knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S'
+
+    runs-on: ubuntu-latest
+
+    steps:
+    - uses: OSDKDev/unlock-issues@v1.1
+      with:
+        repo-token: "${{ secrets.GITHUB_TOKEN }}"

Marlin/Configuration_adv.h

@@ -33,6 +33,9 @@
  */
 #define CONFIGURATION_ADV_H_VERSION 020005
 
+#define KNUTWURST_MEGAS_ADV
+#define KNUTWURST_TMC_ADV
+
 // @section temperature
 
 //===========================================================================
@@ -149,42 +152,61 @@
  * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD
  */
 #if ENABLED(THERMAL_PROTECTION_HOTENDS)
-  #define THERMAL_PROTECTION_PERIOD 3        // Seconds
-  #define THERMAL_PROTECTION_HYSTERESIS 15     // Degrees Celsius
+	#if ENABLED(KNUTWURST_CHIRON)
+	  #define THERMAL_PROTECTION_PERIOD     60     // Seconds
+	  #define THERMAL_PROTECTION_HYSTERESIS 20     // Degrees Celsius		
+	  
+	  #define WATCH_TEMP_PERIOD   60               // Seconds
+	  #define WATCH_TEMP_INCREASE 10               // Degrees Celsius
+	#else
+	  #define THERMAL_PROTECTION_PERIOD 10        // Seconds
+	  #define THERMAL_PROTECTION_HYSTERESIS 15     // Degrees Celsius
 
-  //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
-    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
-  #endif
+	  //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+	  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
+		//#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+	  #endif
 
-  /**
-   * Whenever an M104, M109, or M303 increases the target temperature, the
-   * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
-   * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and
-   * requires a hard reset. This test restarts with any M104/M109/M303, but only
-   * if the current temperature is far enough below the target for a reliable
-   * test.
-   *
-   * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD
-   * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set
-   * below 2.
-   */
-  #define WATCH_TEMP_PERIOD 35                // Seconds
-  #define WATCH_TEMP_INCREASE 5               // Degrees Celsius
+	  /**
+	   * Whenever an M104, M109, or M303 increases the target temperature, the
+	   * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
+	   * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and
+	   * requires a hard reset. This test restarts with any M104/M109/M303, but only
+	   * if the current temperature is far enough below the target for a reliable
+	   * test.
+	   *
+	   * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD
+	   * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set
+	   * below 2.
+	   */
+	  #define WATCH_TEMP_PERIOD 30                // Seconds
+	  #define WATCH_TEMP_INCREASE 3               // Degrees Celsius
+	#endif
 #endif
 
 /**
  * Thermal Protection parameters for the bed are just as above for hotends.
  */
 #if ENABLED(THERMAL_PROTECTION_BED)
-  #define THERMAL_PROTECTION_BED_PERIOD        20 // Seconds
-  #define THERMAL_PROTECTION_BED_HYSTERESIS     2 // Degrees Celsius
+	#if ENABLED(KNUTWURST_CHIRON)
+	  #define THERMAL_PROTECTION_BED_PERIOD         40 // Seconds
+	  #define THERMAL_PROTECTION_BED_HYSTERESIS     10 // Degrees Celsius
 
-  /**
-   * As described above, except for the bed (M140/M190/M303).
-   */
-  #define WATCH_BED_TEMP_PERIOD                60 // Seconds
-  #define WATCH_BED_TEMP_INCREASE               2 // Degrees Celsius
+	  /**
+	   * As described above, except for the bed (M140/M190/M303).
+	   */
+	  #define WATCH_BED_TEMP_PERIOD                120 // Seconds
+	  #define WATCH_BED_TEMP_INCREASE               10 // Degrees Celsius
+	#else
+	  #define THERMAL_PROTECTION_BED_PERIOD        20 // Seconds
+	  #define THERMAL_PROTECTION_BED_HYSTERESIS     2 // Degrees Celsius
+
+	  /**
+	   * As described above, except for the bed (M140/M190/M303).
+	   */
+	  #define WATCH_BED_TEMP_PERIOD                60 // Seconds
+	  #define WATCH_BED_TEMP_INCREASE               2 // Degrees Celsius
+	#endif
 #endif
 
 /**
@@ -303,7 +325,13 @@
 
 // The number of consecutive low temperature errors that can occur
 // before a min_temp_error is triggered. (Shouldn't be more than 10.)
-//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0
+
+
+#if ENABLED(KNUTWURST_CHIRON)
+	#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 3
+#else
+	//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0
+#endif
 
 // The number of milliseconds a hotend will preheat before starting to check
 // the temperature. This value should NOT be set to the time it takes the
@@ -338,7 +366,7 @@
  * Controller Fan
  * To cool down the stepper drivers and MOSFETs.
  *
- * The fan turns on automatically whenever any driver is enabled and turns
+ * The fan turns on automatically  whenever any driver is enabled and turns
  * off (or reduces to idle speed) shortly after drivers are turned off.
  *
  */
@@ -420,6 +448,7 @@
  * Multiple extruders can be assigned to the same pin in which case
  * the fan will turn on when any selected extruder is above the threshold.
  */
+
 #define E0_AUTO_FAN_PIN FAN2_PIN
 #define E1_AUTO_FAN_PIN -1
 #define E2_AUTO_FAN_PIN -1
@@ -428,6 +457,7 @@
 #define E5_AUTO_FAN_PIN -1
 #define CHAMBER_AUTO_FAN_PIN -1
 
+
 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
 #define EXTRUDER_AUTO_FAN_SPEED 255   // 255 == full speed
 #define CHAMBER_AUTO_FAN_TEMPERATURE 30
@@ -520,19 +550,28 @@
 #define NUM_Z_STEPPER_DRIVERS 2   // (1-4) Z options change based on how many
 
 #if NUM_Z_STEPPER_DRIVERS > 1
-  #define Z_MULTI_ENDSTOPS
-  #if ENABLED(Z_MULTI_ENDSTOPS)
-    #define Z2_USE_ENDSTOP          _XMAX_
-    #define Z2_ENDSTOP_ADJUSTMENT   0
-    #if NUM_Z_STEPPER_DRIVERS >= 3
-      #define Z3_USE_ENDSTOP        _YMAX_
-      #define Z3_ENDSTOP_ADJUSTMENT 0
-    #endif
-    #if NUM_Z_STEPPER_DRIVERS >= 4
-      #define Z4_USE_ENDSTOP        _ZMAX_
-      #define Z4_ENDSTOP_ADJUSTMENT 0
-    #endif
+  #if DISABLED(KNUTWURST_ONE_Z_ENDSTOP)
+    #define Z_MULTI_ENDSTOPS
   #endif
+    #if ENABLED(Z_MULTI_ENDSTOPS)
+      #if ANY(KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_P, KNUTWURST_MEGA_X)
+          #define Z2_USE_ENDSTOP      _XMAX_
+      #endif
+      
+      #if ENABLED(KNUTWURST_CHIRON)
+          #define Z2_USE_ENDSTOP      _XMAX_
+      #endif
+
+      #define Z2_ENDSTOP_ADJUSTMENT   0
+      #if NUM_Z_STEPPER_DRIVERS >= 3
+        #define Z3_USE_ENDSTOP        _YMAX_
+        #define Z3_ENDSTOP_ADJUSTMENT 0
+      #endif
+      #if NUM_Z_STEPPER_DRIVERS >= 4
+        #define Z4_USE_ENDSTOP        _ZMAX_
+        #define Z4_ENDSTOP_ADJUSTMENT 0
+      #endif
+    #endif
 #endif
 
 /**
@@ -596,8 +635,9 @@
 #define Z_HOME_BUMP_MM 2
 #define HOMING_BUMP_DIVISOR { 2, 2, 4 }  // Re-Bump Speed Divisor (Divides the Homing Feedrate)
 //#define QUICK_HOME                     // If homing includes X and Y, do a diagonal move initially
-//#define HOMING_BACKOFF_MM { 2, 2, 2 }  // (mm) Move away from the endstops after homing
-
+#if DISABLED(KNUTWURST_CHIRON)
+    #define HOMING_BACKOFF_MM { 2, 2, 0 }  // (mm) Move away from the endstops after homing
+#endif
 // When G28 is called, this option will make Y home before X
 //#define HOME_Y_BEFORE_X
 
@@ -664,7 +704,7 @@
    * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
    * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
    */
-  //#define BLTOUCH_HS_MODE
+  #define BLTOUCH_HS_MODE
 
   // Safety: Enable voltage mode settings in the LCD menu.
   //#define BLTOUCH_LCD_VOLTAGE_MENU
@@ -746,7 +786,7 @@
 // Default stepper release if idle. Set to 0 to deactivate.
 // Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true.
 // Time can be set by M18 and M84.
-#define DEFAULT_STEPPER_DEACTIVE_TIME 120
+#define DEFAULT_STEPPER_DEACTIVE_TIME 0
 #define DISABLE_INACTIVE_X true
 #define DISABLE_INACTIVE_Y true
 #define DISABLE_INACTIVE_Z true  // Set to false if the nozzle will fall down on your printed part when print has finished.
@@ -1468,7 +1508,7 @@
  *
  * Warning: Does not respect endstops!
  */
-//#define BABYSTEPPING
+#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
   //#define INTEGRATED_BABYSTEPPING         // EXPERIMENTAL integration of babystepping into the Stepper ISR
   //#define BABYSTEP_WITHOUT_HOMING
@@ -1517,7 +1557,8 @@
  */
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
-  #define LIN_ADVANCE_K 0	  // Unit: mm compression per 1mm/s extruder speed
+  //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants
+  #define LIN_ADVANCE_K 0.0	  // Unit: mm compression per 1mm/s extruder speed
   //#define LA_DEBUG          // If enabled, this will generate debug information output over USB.
 #endif
 
@@ -1553,19 +1594,21 @@
  * probe points will follow. This prevents any change from causing
  * the probe to be unable to reach any points.
  */
-#if PROBE_SELECTED && !IS_KINEMATIC
-  //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE
-  //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE
-  //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE
-  //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE
+#if ENABLED(KNUTWURST_BLTOUCH)
+  #if PROBE_SELECTED && !IS_KINEMATIC
+    #define MIN_PROBE_EDGE_LEFT 10
+    #define MIN_PROBE_EDGE_RIGHT 10
+    #define MIN_PROBE_EDGE_FRONT 10
+    #define MIN_PROBE_EDGE_BACK 10
+  #endif
 #endif
 
 #if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
   // Override the mesh area if the automatic (max) area is too large
-  //#define MESH_MIN_X MESH_INSET
-  //#define MESH_MIN_Y MESH_INSET
-  //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
-  //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
+  #define MESH_MIN_X MESH_INSET
+  #define MESH_MIN_Y MESH_INSET
+  #define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
+  #define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
 #endif
 
 /**
@@ -1630,13 +1673,13 @@
 //
 #define ARC_SUPPORT                 // Disable this feature to save ~3226 bytes
 #if ENABLED(ARC_SUPPORT)
-  #define MM_PER_ARC_SEGMENT      1 // (mm) Length (or minimum length) of each arc segment
+  #define MM_PER_ARC_SEGMENT      1 // (mm) Length (or minimum length) of each arc segment (default: 1)
   //#define ARC_SEGMENTS_PER_R    1 // Max segment length, MM_PER = Min
-  #define MIN_ARC_SEGMENTS       24 // Minimum number of segments in a complete circle
+  #define MIN_ARC_SEGMENTS        24 // Minimum number of segments in a complete circle (default: 24)
   //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
   #define N_ARC_CORRECTION       25 // Number of interpolated segments between corrections
-  //#define ARC_P_CIRCLES           // Enable the 'P' parameter to specify complete circles
-  //#define CNC_WORKSPACE_PLANES    // Allow G2/G3 to operate in XY, ZX, or YZ planes
+  #define ARC_P_CIRCLES             // Enable the 'P' parameter to specify complete circles
+  #define CNC_WORKSPACE_PLANES      // Allow G2/G3 to operate in XY, ZX, or YZ planes
 #endif
 
 // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
@@ -1671,8 +1714,10 @@
  *
  * Override the default value based on the driver type set in Configuration.h.
  */
-//#define MINIMUM_STEPPER_POST_DIR_DELAY 650
-//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650
+#if NONE(KNUTWURST_MEGA_P, KNUTWURST_TMC)
+  //#define MINIMUM_STEPPER_POST_DIR_DELAY 200
+  //#define MINIMUM_STEPPER_PRE_DIR_DELAY 200
+#endif
 
 /**
  * Minimum stepper driver pulse width (in µs)
@@ -1685,8 +1730,9 @@
  *
  * Override the default value based on the driver type set in Configuration.h.
  */
-//#define MINIMUM_STEPPER_PULSE 2
-
+#if NONE(KNUTWURST_MEGA_P, KNUTWURST_TMC)
+    //#define MINIMUM_STEPPER_PULSE 1
+#endif
 /**
  * Maximum stepping rate (in Hz) the stepper driver allows
  *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
@@ -1712,39 +1758,54 @@
 
 // @section hidden
 
-// The number of linear motions that can be in the plan at any give time.
-// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering.
-#if ENABLED(SDSUPPORT)
-  #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
+/*
+#if ENABLED(KNUTWURST_CHIRON)
+    #if ENABLED(SDSUPPORT)
+      #define BLOCK_BUFFER_SIZE 8 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
+    #else
+      #define BLOCK_BUFFER_SIZE 16 // maximize block buffer
+    #endif
+
+    #define MAX_CMD_SIZE 96
+    #define BUFSIZE 4
+    #define TX_BUFFER_SIZE 0
+    #define RX_BUFFER_SIZE 64
 #else
-  #define BLOCK_BUFFER_SIZE 16 // maximize block buffer
-#endif
+*/
+    // The number of linear motions that can be in the plan at any give time.
+    // THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering.
+    #if ENABLED(SDSUPPORT)
+      #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
+    #else
+      #define BLOCK_BUFFER_SIZE 16 // maximize block buffer
+    #endif
 
-// @section serial
+    // @section serial
 
-// The ASCII buffer for serial input
-#define MAX_CMD_SIZE 128
-#define BUFSIZE 8
+    // The ASCII buffer for serial input
+    #define MAX_CMD_SIZE 128
+    #define BUFSIZE 8
 
-// Transmission to Host Buffer Size
-// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
-// To buffer a simple "ok" you need 4 bytes.
-// For ADVANCED_OK (M105) you need 32 bytes.
-// For debug-echo: 128 bytes for the optimal speed.
-// Other output doesn't need to be that speedy.
-// :[0, 2, 4, 8, 16, 32, 64, 128, 256]
-#define TX_BUFFER_SIZE 4
+    // Transmission to Host Buffer Size
+    // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
+    // To buffer a simple "ok" you need 4 bytes.
+    // For ADVANCED_OK (M105) you need 32 bytes.
+    // For debug-echo: 128 bytes for the optimal speed.
+    // Other output doesn't need to be that speedy.
+    // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
+    #define TX_BUFFER_SIZE 0
 
-// Host Receive Buffer Size
-// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
-// To use flow control, set this buffer size to at least 1024 bytes.
-// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
-#define RX_BUFFER_SIZE 256
+    // Host Receive Buffer Size
+    // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
+    // To use flow control, set this buffer size to at least 1024 bytes.
+    // :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
+    #define RX_BUFFER_SIZE 256
+//#endif
 
 #if RX_BUFFER_SIZE >= 1024
   // Enable to have the controller send XON/XOFF control characters to
   // the host to signal the RX buffer is becoming full.
-  //#define SERIAL_XON_XOFF
+  #define SERIAL_XON_XOFF
 #endif
 
 // Add M575 G-code to change the baud rate
@@ -1867,7 +1928,7 @@
  * Requires NOZZLE_PARK_FEATURE.
  * This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
  */
-//#define ADVANCED_PAUSE_FEATURE
+#define ADVANCED_PAUSE_FEATURE
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
   #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
   #define PAUSE_PARK_RETRACT_LENGTH            4  // (mm) Initial retract.
@@ -3142,3 +3203,6 @@
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
+
+//#define KNUTWURST_MEGAS_ADV
+//#define KNUTWURST_TMC_ADV

Marlin/Version.h

@@ -28,7 +28,7 @@
 /**
  * Marlin release version identifier
  */
-//#define SHORT_BUILD_VERSION "2.0.5.3"
+//#define SHORT_BUILD_VERSION "2.0.5.4"
 
 /**
  * Verbose version identifier which should contain a reference to the location
@@ -41,7 +41,7 @@
  * here we define this default string as the date where the latest release
  * version was tagged.
  */
-//#define STRING_DISTRIBUTION_DATE "2020-01-31"
+//#define STRING_DISTRIBUTION_DATE "2020-07-09"
 
 /**
  * Defines a generic printer name to be output to the LCD after booting Marlin.

Marlin/src/core/boards.h

@@ -104,6 +104,7 @@
 #define BOARD_TANGO                   1148  // BIQU Tango V1
 #define BOARD_MKS_GEN_L_V2            1149  // MKS GEN L V2
 #define BOARD_COPYMASTER_3D           1150  // Copymaster 3D
+#define BOARD_TRIGORILLA_CHIRON       1151  // TriGorilla Anycubic version 1.4 based on RAMPS EFB for Chiron
 
 //
 // RAMBo and derivatives

Marlin/src/core/language.h

@@ -126,7 +126,7 @@
 #define STR_INVALID_E_STEPPER               "Invalid E stepper"
 #define STR_E_STEPPER_NOT_SPECIFIED         "E stepper not specified"
 #define STR_INVALID_SOLENOID                "Invalid solenoid"
-#define STR_M115_REPORT                     "FIRMWARE_NAME:Marlin " DETAILED_BUILD_VERSION " MARLIN-AI3M_VERSION:" CUSTOM_BUILD_VERSION " SOURCE_CODE_URL:" SOURCE_CODE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID
+#define STR_M115_REPORT                     "FIRMWARE_NAME:Marlin " DETAILED_BUILD_VERSION " KNUTWURST_AI3M_VERSION:" CUSTOM_BUILD_VERSION " DISTRIBUTION_DATE:" STRING_DISTRIBUTION_DATE " SOURCE_CODE_URL:" SOURCE_CODE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" MACHINE_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID
 #define STR_MARLIN_AI3M                     "Marlin-AI3M"
 #define STR_COUNT_X                         " Count X:"
 #define STR_COUNT_A                         " Count A:"

Marlin/src/core/types.h

@@ -347,14 +347,14 @@ struct XYZval {
   FI XYZval<T>  operator* (const XYZEval<T> &rs)       { XYZval<T> ls = *this; ls.x *= rs.x; ls.y *= rs.y; ls.z *= rs.z; return ls; }
   FI XYZval<T>  operator/ (const XYZEval<T> &rs) const { XYZval<T> ls = *this; ls.x /= rs.x; ls.y /= rs.y; ls.z /= rs.z; return ls; }
   FI XYZval<T>  operator/ (const XYZEval<T> &rs)       { XYZval<T> ls = *this; ls.x /= rs.x; ls.y /= rs.y; ls.z /= rs.z; return ls; }
-  FI XYZval<T>  operator* (const float &v)       const { XYZval<T> ls = *this; ls.x *= v;    ls.y *= v;    ls.z *= z;    return ls; }
-  FI XYZval<T>  operator* (const float &v)             { XYZval<T> ls = *this; ls.x *= v;    ls.y *= v;    ls.z *= z;    return ls; }
-  FI XYZval<T>  operator* (const int &v)         const { XYZval<T> ls = *this; ls.x *= v;    ls.y *= v;    ls.z *= z;    return ls; }
-  FI XYZval<T>  operator* (const int &v)               { XYZval<T> ls = *this; ls.x *= v;    ls.y *= v;    ls.z *= z;    return ls; }
-  FI XYZval<T>  operator/ (const float &v)       const { XYZval<T> ls = *this; ls.x /= v;    ls.y /= v;    ls.z /= z;    return ls; }
-  FI XYZval<T>  operator/ (const float &v)             { XYZval<T> ls = *this; ls.x /= v;    ls.y /= v;    ls.z /= z;    return ls; }
-  FI XYZval<T>  operator/ (const int &v)         const { XYZval<T> ls = *this; ls.x /= v;    ls.y /= v;    ls.z /= z;    return ls; }
-  FI XYZval<T>  operator/ (const int &v)               { XYZval<T> ls = *this; ls.x /= v;    ls.y /= v;    ls.z /= z;    return ls; }
+  FI XYZval<T>  operator* (const float &v)       const { XYZval<T> ls = *this; ls.x *= v;    ls.y *= v;    ls.z *= v;    return ls; }
+  FI XYZval<T>  operator* (const float &v)             { XYZval<T> ls = *this; ls.x *= v;    ls.y *= v;    ls.z *= v;    return ls; }
+  FI XYZval<T>  operator* (const int &v)         const { XYZval<T> ls = *this; ls.x *= v;    ls.y *= v;    ls.z *= v;    return ls; }
+  FI XYZval<T>  operator* (const int &v)               { XYZval<T> ls = *this; ls.x *= v;    ls.y *= v;    ls.z *= v;    return ls; }
+  FI XYZval<T>  operator/ (const float &v)       const { XYZval<T> ls = *this; ls.x /= v;    ls.y /= v;    ls.z /= v;    return ls; }
+  FI XYZval<T>  operator/ (const float &v)             { XYZval<T> ls = *this; ls.x /= v;    ls.y /= v;    ls.z /= v;    return ls; }
+  FI XYZval<T>  operator/ (const int &v)         const { XYZval<T> ls = *this; ls.x /= v;    ls.y /= v;    ls.z /= v;    return ls; }
+  FI XYZval<T>  operator/ (const int &v)               { XYZval<T> ls = *this; ls.x /= v;    ls.y /= v;    ls.z /= v;    return ls; }
   FI XYZval<T>  operator>>(const int &v)         const { XYZval<T> ls = *this; _RS(ls.x); _RS(ls.y); _RS(ls.z); return ls; }
   FI XYZval<T>  operator>>(const int &v)               { XYZval<T> ls = *this; _RS(ls.x); _RS(ls.y); _RS(ls.z); return ls; }
   FI XYZval<T>  operator<<(const int &v)         const { XYZval<T> ls = *this; _LS(ls.x); _LS(ls.y); _LS(ls.z); return ls; }

Marlin/src/gcode/bedlevel/abl/G29.cpp

@@ -36,6 +36,10 @@
 #include "../../../module/probe.h"
 #include "../../queue.h"
 
+#if ENABLED(KNUTWURST_TFT_LEVELING)
+    #include "../../../lcd/HardwareSerial.h"
+#endif
+
 #if ENABLED(PROBE_TEMP_COMPENSATION)
   #include "../../../feature/probe_temp_comp.h"
   #include "../../../module/temperature.h"
@@ -811,6 +815,11 @@ G29_TYPE GcodeSuite::G29() {
       if (!dryrun) extrapolate_unprobed_bed_level();
       print_bilinear_leveling_grid();
 
+      #if ENABLED(KNUTWURST_TFT_LEVELING)
+          HARDWARE_SERIAL_PROTOCOLPGM("J25"); // Autoleveling done!
+          HARDWARE_SERIAL_ENTER();
+      #endif
+
       refresh_bed_level();
 
       #if ENABLED(ABL_BILINEAR_SUBDIVISION)

Marlin/src/gcode/motion/G2_G3.cpp

@@ -216,7 +216,7 @@ void plan_arc(
       planner.apply_leveling(raw);
     #endif
 
-    if (!planner.buffer_line(raw, scaled_fr_mm_s, active_extruder, seg_length
+    if (!planner.buffer_line(raw, scaled_fr_mm_s, active_extruder, 0 /* seg_length */
       #if ENABLED(SCARA_FEEDRATE_SCALING)
         , inv_duration
       #endif

Marlin/src/inc/Version.h

@@ -25,23 +25,26 @@
  * Release version. Leave the Marlin version or apply a custom scheme.
  */
 #ifndef SHORT_BUILD_VERSION
-  #define SHORT_BUILD_VERSION "2.0.5.3"
+  #define SHORT_BUILD_VERSION "2.0.x"
 #endif
 
-  /**
-   * Verbose version identifier which should contain a reference to the location
-   * from where the binary was downloaded or the source code was compiled.
-   */
+/**
+ * Verbose version identifier containing a unique identifier, such as the
+ * vendor name, download location, GitHub account, etc.
+ */
+#ifndef DETAILED_BUILD_VERSION
   #define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION " (knutwurst, Github)"
+#endif
 
 /**
- * Defines the version of the Marlin build. Not to be confused with
- * Marlin's own build number, e.g. 2.0.x.
+ * The STRING_DISTRIBUTION_DATE represents when the binary file was built,
+ * here we define this default string as the date where the latest release
+ * version was tagged.
  */
- #define CUSTOM_BUILD_VERSION "1.0.2"
+ #define CUSTOM_BUILD_VERSION "1.2.0"
 
 #ifndef STRING_DISTRIBUTION_DATE
-  #define STRING_DISTRIBUTION_DATE "2020-03-31"
+  #define STRING_DISTRIBUTION_DATE "2021-06-24"
 #endif
 
 /**
@@ -68,18 +71,21 @@
   #define PROTOCOL_VERSION "1.0"
 #endif
 
-  /**
-   * Defines a generic printer name to be output to the LCD after booting Marlin.
-   */
-  #define MACHINE_NAME "Anycubic i3 MEGA S"
+/**
+ * Define a generic printer name to be output to the LCD after booting Marlin.
+ */
+#ifndef MACHINE_NAME
+  #define MACHINE_NAME "Knutwurst's Anycubic Printer"
+#endif
 
-  /**
-   * The SOURCE_CODE_URL is the location where users will find the Marlin Source
-   * Code which is installed on the device. In most cases —unless the manufacturer
-   * has a distinct Github fork— the Source Code URL should just be the main
-   * Marlin repository.
-   */
+/**
+ * Website where users can find Marlin source code for the binary installed on the
+ * device. Override this if you provide public source code download. (GPLv3 requires
+ * providing the source code to your customers.)
+ */
+#ifndef SOURCE_CODE_URL
   #define SOURCE_CODE_URL "https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S"
+#endif
 
 /**
  * Default generic printer UUID.

Marlin/src/lcd/HardwareSerial.cpp

@@ -37,14 +37,16 @@
 
 #include "HardwareSerial.h"
 
+millis_t previous_cmd_ms = 0;
+
 // Define constants and variables for buffering incoming serial data.  We're
 // using a ring buffer (I think), in which head is the index of the location
 // to which to write the next incoming character and tail is the index of the
 // location from which to read.
 #if (RAMEND < 1000)
-  #define SERIAL_BUFFER_SIZE 64
+  #define SERIAL_BUFFER_SIZE 16
 #else
-  #define SERIAL_BUFFER_SIZE 128
+  #define SERIAL_BUFFER_SIZE 64
 #endif
 
 struct ring_buffer

Marlin/src/lcd/anycubic_touchscreen.h

@@ -21,8 +21,20 @@
 #ifndef anycubic_touchscreen_h
 #define anycubic_touchscreen_h
 
-#include <stdio.h>
-#include "../inc/MarlinConfig.h"
+//#include <stdio.h>
+//#include "../inc/MarlinConfig.h"
+//#include "../module/configuration_store.h"
+
+#include "./src/inc/MarlinConfigPre.h"
+#include "./src/feature/bedlevel/bedlevel.h"
+#include "./src/feature/bedlevel/abl/abl.h"
+#include "src/module/probe.h"
+
+
+enum axis_t     : uint8_t { X, Y, Z, X2, Y2, Z2, Z3, Z4 };
+enum extruder_t : uint8_t { E0, E1, E2, E3, E4, E5, E6, E7 };
+void setAxisPosition_mm(const float, const axis_t, const feedRate_t=0);
+void initializeGrid();
 
 char *itostr2(const uint8_t &x);
 
@@ -33,7 +45,14 @@ char *ftostr32(const float &);
 
 #define TFTBUFSIZE 4
 #define TFT_MAX_CMD_SIZE 96
-#define MSG_MY_VERSION "V116"
+#define MSG_MY_VERSION CUSTOM_BUILD_VERSION
+#define MAX_PRINTABLE_FILENAME_LEN 30
+
+#if ENABLED(KNUTWURST_CHIRON)
+  #define FILAMENT_RUNOUT_PIN 33
+#else
+  #define FILAMENT_RUNOUT_PIN 19
+#endif
 
 #define ANYCUBIC_TFT_STATE_IDLE 0
 #define ANYCUBIC_TFT_STATE_SDPRINT 1
@@ -43,6 +62,167 @@ char *ftostr32(const float &);
 #define ANYCUBIC_TFT_STATE_SDSTOP_REQ 5
 #define ANYCUBIC_TFT_STATE_SDOUTAGE 99
 
+#if DISABLED(KNUTWURST_DGUS2_TFT)
+#define SM_DIR_UP_L           "/.."
+#define SM_DIR_UP_S           ".."
+#define SM_SPECIAL_MENU_L     "<Special Menu>"
+#define SM_SPECIAL_MENU_S     "<SPECM>"
+#define SM_PID_HOTEND_L       "<PID Tune Hotend>"
+#define SM_PID_HOTEND_S       "<PIDHE>"
+#define SM_PID_BED_L          "<PID Tune Ultrabase>"
+#define SM_PID_BED_S          "<PIDUB>"
+#define SM_SAVE_EEPROM_L      "<Save EEPROM>"
+#define SM_SAVE_EEPROM_S      "<SAVEE>"
+#define SM_LOAD_DEFAULTS_L    "<Load FW Defaults>"
+#define SM_LOAD_DEFAULTS_S    "<LDDEF>"
+#define SM_PREHEAT_BED_L      "<Preheat Ultrabase>"
+#define SM_PREHEAT_BED_S      "<PREHE>"
+#define SM_MESH_MENU_L        "<Mesh Leveling>"
+#define SM_MESH_MENU_S        "<MESHL>"
+#define SM_MESH_START_L       "<Start Mesh Leveling>"
+#define SM_MESH_START_S       "<SMESH>"
+#define SM_MESH_NEXT_L        "<Next Mesh Point>"
+#define SM_MESH_NEXT_S        "<NEXTM>"
+#define SM_Z_UP_01_L          "<Z Up 0.1>"
+#define SM_Z_UP_01_S          "<ZUP01>"
+#define SM_Z_DN_01_L          "<Z Down 0.1>"
+#define SM_Z_DN_01_S          "<ZDN01>"
+#define SM_Z_UP_002_L         "<Z Up 0.02>"
+#define SM_Z_UP_002_S         "<ZUP002>"
+#define SM_Z_DN_002_L         "<Z Down 0.02>"
+#define SM_Z_DN_002_S         "<ZDN002>"
+#define SM_Z_UP_001_L         "<Z Up 0.01>"
+#define SM_Z_UP_001_S         "<ZUP001>"
+#define SM_Z_DN_001_L         "<Z Down 0.01>"
+#define SM_Z_DN_001_S         "<ZDN001>"
+#define SM_BLTOUCH_L          "<Start Auto Leveling>"
+#define SM_BLTOUCH_S          "<BLTCH>"
+#define SM_RESETLV_L          "<Reset Level Grid>"
+#define SM_RESETLV_S          "<RSTLV>"
+#define SM_PAUSE_L            "<Fil. Change Pause>"
+#define SM_PAUSE_S            "<PAUSE>"
+#define SM_RESUME_L           "<Fil. Change Resume>"
+#define SM_RESUME_S           "<RESUM>"
+#define SM_DIS_FILSENS_L      "<Disable Fil. Sensor>"
+#define SM_DIS_FILSENS_S      "<DISSEN>"
+#define SM_EN_FILSENS_L       "<Enable Fil. Sensor>"
+#define SM_EN_FILSENS_S       "<ENSEN>"
+#define SM_EXIT_L             "<Exit>"
+#define SM_EXIT_S             "<EXIT>"
+
+#define SM_BACK_L             "<End Mesh Leveling>"
+#define SM_BACK_S             "<BACK>"
+
+#define SM_FLOWMENU_L         "<Set Flowrate>"
+#define SM_FLOWMENU_S         "<SETFLO>"
+#define SM_FLOW_DISP_L        "<Flow is XXX>"
+#define SM_FLOW_DISP_S        "<FLDISP>"
+#define SM_FLOW_UP_L          "<Up>"
+#define SM_FLOW_UP_S          "<UP>"
+#define SM_FLOW_DN_L          "<Down>"
+#define SM_FLOW_DN_S          "<DOWN>"
+#define SM_FLOW_EXIT_L        "<End Flow Settings>"
+#define SM_FLOW_EXIT_S        "<EXTFLW>"
+
+#define SM_EZLVL_MENU_L       "<Easy 4 Point Level>"
+#define SM_EZLVL_MENU_S       "<EZLVLM>"
+#define SM_EZLVL_P1_L         "<Point A>"
+#define SM_EZLVL_P1_S         "<EZLPA>"
+#define SM_EZLVL_P2_L         "<Point B>"
+#define SM_EZLVL_P2_S         "<EZLPB>"
+#define SM_EZLVL_P3_L         "<Point C>"
+#define SM_EZLVL_P3_S         "<EZLPC>"
+#define SM_EZLVL_P4_L         "<Point D>"
+#define SM_EZLVL_P4_S         "<EZLPD>"
+#define SM_EZLVL_EXIT_L       "<End Easy Leveling>"
+#define SM_EZLVL_EXIT_S       "<EZLEXT>"
+
+#endif
+
+#if ENABLED(KNUTWURST_DGUS2_TFT)
+#define SM_DIR_UP_L           "<<< BACK <<<        .gcode"
+#define SM_DIR_UP_S           "DIR_UP~1.GCO"
+#define SM_SPECIAL_MENU_L     "<Special Menu>      .gcode"
+#define SM_SPECIAL_MENU_S     "<SPECI~1.GCO"
+#define SM_PID_HOTEND_L       "<PID Tune Hotend>   .gcode"
+#define SM_PID_HOTEND_S       "<PIDTU~1.GCO"
+#define SM_PID_BED_L          "<PID Tune Ultrabase>.gcode"
+#define SM_PID_BED_S          "<PIDTU~2.GCO"
+#define SM_SAVE_EEPROM_L      "<Save EEPROM>       .gcode"
+#define SM_SAVE_EEPROM_S      "<SAVEE~1.GCO"
+#define SM_LOAD_DEFAULTS_L    "<Load FW Defaults>  .gcode"
+#define SM_LOAD_DEFAULTS_S    "<LOADF~1.GCO"
+#define SM_PREHEAT_BED_L      "<Preheat Ultrabase> .gcode"
+#define SM_PREHEAT_BED_S      "<PREHE~1.GCO"
+#define SM_MESH_MENU_L        "<Mesh Leveling>     .gcode"
+#define SM_MESH_MENU_S        "<MESHL~1.GCO"
+#define SM_MESH_START_L       "<Start MeshLeveling>.gcode"
+#define SM_MESH_START_S       "<START~1.GCO"
+#define SM_MESH_NEXT_L        "<Next Mesh Point>   .gcode"
+#define SM_MESH_NEXT_S        "<NEXTM~1.GCO"
+#define SM_Z_UP_01_L          "<Z Up 0.1>          .gcode"
+#define SM_Z_UP_01_S          "<ZUP01~1.GCO"
+#define SM_Z_DN_01_L          "<Z Down 0.1>        .gcode"
+#define SM_Z_DN_01_S          "<ZDOWN~1.GCO"
+#define SM_Z_UP_002_L         "<Z Up 0.02>         .gcode"
+#define SM_Z_UP_002_S         "<ZUP00~1.GCO"
+#define SM_Z_DN_002_L         "<Z Down 0.02>       .gcode"
+#define SM_Z_DN_002_S         "<ZDOWN~2.GCO"
+#define SM_Z_UP_001_L         "<Z Up 0.01>         .gcode"
+#define SM_Z_UP_001_S         "<ZUP00~2.GCO"
+#define SM_Z_DN_001_L         "<Z Down 0.01>       .gcode"
+#define SM_Z_DN_001_S         "<ZDOWN~3.GCO"
+#define SM_BLTOUCH_L          "<Start AutoLeveling>.gcode"
+#define SM_BLTOUCH_S          "<BLTOU~1.GCO"
+#define SM_RESETLV_L          "<Reset Level Grid>  .gcode"
+#define SM_RESETLV_S          "<RSTLV~1.GCO>"
+#define SM_PAUSE_L            "<Fil. Change Pause> .gcode"
+#define SM_PAUSE_S            "<FILCH~2.GCO"
+#define SM_RESUME_L           "<Fil. Change Resume>.gcode"
+#define SM_RESUME_S           "<FILCH~1.GCO"
+#define SM_DIS_FILSENS_L      "<Disable Fil.Sensor>.gcode"
+#define SM_DIS_FILSENS_S      "<DISAB~1.GCO"
+#define SM_EN_FILSENS_L       "<Enable Fil. Sensor>.gcode"
+#define SM_EN_FILSENS_S       "<ENABL~1.GCO"
+#define SM_EXIT_L             "<Exit>              .gcode"
+#define SM_EXIT_S             "<EXIT_~1.GCO"
+
+#define SM_BACK_L             "<End Mesh Leveling> .gcode"
+#define SM_BACK_S             "<BACK_~1.GCO"
+
+#define SM_FLOWMENU_L         "<Set Flowrate>      .gcode"
+#define SM_FLOWMENU_S         "<SETFLO1.GCO"
+#define SM_FLOW_DISP_L        "<Flow is XXX%>      .gcode"
+#define SM_FLOW_DISP_S        "<FLDISPL.GCO"
+#define SM_FLOW_UP_L          "<Up>                .gcode"
+#define SM_FLOW_UP_S          "<UPFLOW1.GCO"
+#define SM_FLOW_DN_L          "<Down>              .gcode"
+#define SM_FLOW_DN_S          "<DWNFLOW.GCO"
+#define SM_FLOW_EXIT_L        "<End Flow Settings> .gcode"
+#define SM_FLOW_EXIT_S        "<EXTFLW1.GCO"
+
+#define SM_EZLVL_MENU_L       "<Easy 4 Point Level>.gcode"
+#define SM_EZLVL_MENU_S       "<EZLVLM1.GCO"
+#define SM_EZLVL_P1_L         "<Point A>           .gcode"
+#define SM_EZLVL_P1_S         "<EZLPA01.GCO"
+#define SM_EZLVL_P2_L         "<Point B>           .gcode"
+#define SM_EZLVL_P2_S         "<EZLPB01.GCO"
+#define SM_EZLVL_P3_L         "<Point C>           .gcode"
+#define SM_EZLVL_P3_S         "<EZLPC01.GCO"
+#define SM_EZLVL_P4_L         "<Point D>           .gcode"
+#define SM_EZLVL_P4_S         "<EZLPD01.GCO"
+#define SM_EZLVL_EXIT_L       "<End Easy Leveling> .gcode"
+#define SM_EZLVL_EXIT_S       "<EZLEXT1.GCO"
+#endif
+
+#if ENABLED(KNUTWURST_TFT_LEVELING)
+  // eeprom_index
+  extern int z_values_index;
+  extern int z_values_size;
+  // temp value which needs to be saved
+  extern float SAVE_zprobe_zoffset;
+#endif
+
 class AnycubicTouchscreenClass
 {
 public:
@@ -85,7 +265,9 @@ private:
   char LastSDstatus = 0;
   uint16_t HeaterCheckCount = 0;
   bool IsParked = false;
+  int currentFlowRate = 0;
 
+#if defined(POWER_OUTAGE_TEST)
   struct OutageDataStruct
   {
     char OutageDataVersion;
@@ -95,13 +277,12 @@ private:
     float last_hotend_temp;
     long lastSDposition;
   } OutageData;
+#endif
 
-  void WriteOutageEEPromData();
-  void ReadOutageEEPromData();
-
+  int CodeValueInt();
   float CodeValue();
   bool CodeSeen(char);
-  void Ls();
+  void PrintList();
   void StartPrint();
   void PausePrint();
   void StopPrint();
@@ -115,14 +296,81 @@ private:
   void ReheatNozzle();
   void ParkAfterStop();
 
-  char SelectedDirectory[30];
+  char currentTouchscreenSelection[64];
+  char currentFileOrDirectory[64];
+  String flowRateBuffer;
+  uint16_t MyFileNrCnt = 0;
+  uint8_t FilamentSensorEnabled = true;
+
   uint8_t SpecialMenu = false;
+  uint8_t MMLMenu = false;
+  uint8_t FlowMenu = false;
+  uint8_t LevelMenu = false;  
 
 #if ENABLED(ANYCUBIC_FILAMENT_RUNOUT_SENSOR)
   char FilamentTestStatus = false;
   char FilamentTestLastStatus = false;
   bool FilamentSetMillis = true;
+  int FilamentRunoutCounter = 0;
 #endif
+
+
+#if ENABLED(KNUTWURST_MEGA_P_LASER)
+
+typedef struct { 
+    unsigned char       bfType[2]; 
+    unsigned char       bfSize[4]; 
+    unsigned char       bfReserved1[2]; 
+    unsigned char       bfReserved2[2]; 
+    unsigned char       bfOffBits[4];
+    unsigned char       biSize[4]; 
+    unsigned char       biWidth[4]; 
+    unsigned char       biHeight[4]; 
+    unsigned char       biPlanes[2]; 
+    unsigned char       biBitCount[2]; 
+    unsigned char      biCompression[4]; 
+    unsigned char      biSizeImage[4]; 
+    unsigned char      biXPelsPerMeter[4]; 
+    unsigned char      biYPelsPerMeter[4]; 
+    unsigned char      biClrUsed[4]; 
+    unsigned char      biClrImportant[4]; 
+}BMP_HEAD;
+
+
+typedef struct 
+{
+    unsigned long pic_file_size;
+    unsigned long pic_ptr;
+    unsigned long pic_start;
+
+    float pic_pixel_distance;
+    float laser_height;
+    float x_offset;
+    float y_offset;
+
+    unsigned int  pic_realy_widht;
+    unsigned int  pic_widht;
+    unsigned int  pic_hight;
+    unsigned char pic_bit;
+    unsigned char pic_widht_odd; 
+    unsigned char pic_hight_odd; 
+
+    unsigned char pic_print_status;
+    unsigned char pic_dir;
+
+    unsigned char pic_vector;
+    unsigned char pic_x_mirror;
+    unsigned char pic_y_mirror;
+    unsigned char pic_laser_time;
+}PRINTER_STRUCT;
+
+#define PIC_FIXED 0.1f //  //  POINT/MM
+#define PIC_OPEN  50 //  //  ms
+#define PIC_SPEDD 20000
+#define MIN_GRAY_VLAUE  20
+#define LASER_PRINT_SPEED 30  //50*60
+#endif
+
 };
 
 extern AnycubicTouchscreenClass AnycubicTouchscreen;

Marlin/src/module/configuration_store.cpp

@@ -51,11 +51,14 @@
 #include "stepper.h"
 #include "temperature.h"
 #include "../lcd/ultralcd.h"
+#include "../lcd/anycubic_touchscreen.h"
 #include "../core/language.h"
 #include "../libs/vector_3.h"   // for matrix_3x3
 #include "../gcode/gcode.h"
 #include "../MarlinCore.h"
 
+#include "../sd/cardreader.h"
+
 #if EITHER(EEPROM_SETTINGS, SD_FIRMWARE_UPDATE)
   #include "../HAL/shared/eeprom_api.h"
 #endif
@@ -522,6 +525,9 @@ void MarlinSettings::postprocess() {
   #define EEPROM_READ_ALWAYS(VAR) do{ persistentStore.read_data(eeprom_index, (uint8_t*)&VAR, sizeof(VAR), &working_crc);               }while(0)
   #define EEPROM_ASSERT(TST,ERR)  do{ if (!(TST)) { SERIAL_ERROR_MSG(ERR); eeprom_error = true; } }while(0)
 
+  #define EEPROM_WRITE_VAR(pos, value) persistentStore.write_data(pos, (uint8_t*)&value, sizeof(value))
+  #define EEPROM_READ_VAR(pos, value) persistentStore.read_data(pos, (uint8_t*)&value, sizeof(value))
+
   #if ENABLED(DEBUG_EEPROM_READWRITE)
     #define _FIELD_TEST(FIELD) \
       EEPROM_ASSERT( \
@@ -1557,6 +1563,12 @@ void MarlinSettings::postprocess() {
             if (!validating) set_bed_leveling_enabled(false);
             EEPROM_READ(bilinear_grid_spacing);        // 2 ints
             EEPROM_READ(bilinear_start);               // 2 ints
+
+            #if ENABLED(KNUTWURST_TFT_LEVELING)
+              z_values_index = eeprom_index;
+              z_values_size = sizeof(z_values);
+            #endif
+
             EEPROM_READ(z_values);                     // 9 to 256 floats
           }
           else // EEPROM data is stale
@@ -3682,6 +3694,45 @@ void MarlinSettings::reset() {
     #endif
   }
 
+
+#ifdef POWER_OUTAGE_TEST
+float last_position[4] = { 0.0,0.0,0.0,0.0 };
+long last_sd_position[1] = { 0 };
+
+void OutageSave()
+{
+  char ver[4] = "000";
+  int j = 20;
+  EEPROM_WRITE_VAR(j,ver);
+  last_sd_position[0] = card.GetLastSDpos();
+  last_position[0] = current_position[E_AXIS];
+  last_position[1] = current_position[Z_AXIS];
+  last_position[2] = current_position[Y_AXIS];
+  last_position[3] = current_position[X_AXIS]; 
+  
+  EEPROM_WRITE_VAR(j,last_sd_position[0]);
+  EEPROM_WRITE_VAR(j,last_position[0]); //E 
+  EEPROM_WRITE_VAR(j,last_position[1]); //Z
+  EEPROM_WRITE_VAR(j,last_position[2]); //Y
+  EEPROM_WRITE_VAR(j,last_position[3]);  //X  
+}
+
+
+void OutageRead()
+{
+    int i = 20;
+    char stored_ver[4];
+    char ver[4] = EEPROM_VERSION; 
+    EEPROM_READ_VAR(i,stored_ver);  
+    EEPROM_READ_VAR(i,last_sd_position[0]);  
+    EEPROM_READ_VAR(i,last_position[0]); //E
+    EEPROM_READ_VAR(i,last_position[1]); //Z
+    EEPROM_READ_VAR(i,last_position[2]); //Y
+    EEPROM_READ_VAR(i,last_position[3]); //X
+}
+
+#endif
+
 #endif // !DISABLE_M503
 
 #pragma pack(pop)

Marlin/src/module/configuration_store.h

@@ -27,6 +27,15 @@
   #include "../HAL/shared/eeprom_api.h"
 #endif
 
+#ifdef POWER_OUTAGE_TEST
+
+static bool RestartFlag = false;
+void OutageSave();
+void OutageRead();
+extern float last_position[4];
+extern long last_sd_position[1];
+#endif
+
 class MarlinSettings {
   public:
     static uint16_t datasize();

Marlin/src/module/temperature.cpp

@@ -835,7 +835,7 @@ void Temperature::min_temp_error(const heater_ind_t heater) {
 
 #if HOTENDS
   #if ENABLED(PID_DEBUG)
-    extern bool PID_Debug_Flag;
+    extern bool pid_debug_flag;
   #endif
 
   float Temperature::get_pid_output_hotend(const uint8_t E_NAME) {
@@ -918,7 +918,7 @@ void Temperature::min_temp_error(const heater_ind_t heater) {
       #endif // PID_OPENLOOP
 
       #if ENABLED(PID_DEBUG)
-        if (ee == active_extruder && PID_Debug_Flag) {
+        if (ee == active_extruder && pid_debug_flag) {
           SERIAL_ECHO_START();
           SERIAL_ECHOPAIR(STR_PID_DEBUG, ee, STR_PID_DEBUG_INPUT, temp_hotend[ee].celsius, STR_PID_DEBUG_OUTPUT, pid_output);
           #if DISABLED(PID_OPENLOOP)
@@ -2071,22 +2071,11 @@ void Temperature::init() {
 
       case TRRunaway:
         _temp_error(heater_id, str_t_thermal_runaway, GET_TEXT(MSG_THERMAL_RUNAWAY));
-        BUZZ(2000, 1108);
-        BUZZ(2000, 1661);
-        BUZZ(2000, 1108);
-        BUZZ(2000, 1661);
-        BUZZ(2000, 1108);
-        BUZZ(2000, 1661);
-        BUZZ(2000, 1108);
-        BUZZ(2000, 1661);
-        BUZZ(2000, 1108);
-        BUZZ(2000, 1661);
-        BUZZ(2000, 1108);
-        BUZZ(2000, 1661);
-        BUZZ(2000, 1108);
-        BUZZ(2000, 1661);
-        BUZZ(2000, 1108);
-        BUZZ(2000, 1661);
+        for(uint8_t i = 0; i < 30; i++)
+        {
+          BUZZ(2000, 1108);
+          BUZZ(2000, 1661);
+        }
     }
   }
 

Marlin/src/pins/pins.h

@@ -190,6 +190,8 @@
   #include "ramps/pins_MKS_GEN_L_V2.h"          // ATmega2560                             env:mega2560
 #elif MB(COPYMASTER_3D)
   #include "ramps/pins_COPYMASTER_3D.h"         // ATmega2560                             env:mega2560
+#elif MB(TRIGORILLA_CHIRON)
+  #include "ramps/pins_TRIGORILLA_CHIRON.h"     // ATmega2560                             env:mega2560
 
 //
 // RAMBo and derivatives

Marlin/src/pins/ramps/pins_RAMPS_CHIRON.h

@@ -0,0 +1,723 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Arduino Mega with RAMPS v1.4 (or v1.3) pin assignments
+ *
+ * Applies to the following boards:
+ *
+ *  RAMPS_14_EFB (Hotend, Fan, Bed)
+ *  RAMPS_14_EEB (Hotend0, Hotend1, Bed)
+ *  RAMPS_14_EFF (Hotend, Fan0, Fan1)
+ *  RAMPS_14_EEF (Hotend0, Hotend1, Fan)
+ *  RAMPS_14_SF  (Spindle, Controller Fan)
+ *
+ *  RAMPS_13_EFB (Hotend, Fan, Bed)
+ *  RAMPS_13_EEB (Hotend0, Hotend1, Bed)
+ *  RAMPS_13_EFF (Hotend, Fan0, Fan1)
+ *  RAMPS_13_EEF (Hotend0, Hotend1, Fan)
+ *  RAMPS_13_SF  (Spindle, Controller Fan)
+ *
+ *  Other pins_MYBOARD.h files may override these defaults
+ *
+ *  Differences between
+ *  RAMPS_13 | RAMPS_14
+ *         7 | 11
+ */
+
+#ifdef TARGET_LPC1768
+  #error "Oops! Set MOTHERBOARD to an LPC1768-based board when building for LPC1768."
+#elif defined(__STM32F1__)
+  #error "Oops! Set MOTHERBOARD to an STM32F1-based board when building for STM32F1."
+#endif
+
+#if NONE(IS_RAMPS_SMART, IS_RAMPS_DUO, IS_RAMPS4DUE, TARGET_LPC1768)
+  #if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
+    #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
+  #endif
+#endif
+
+#ifndef BOARD_INFO_NAME
+  #define BOARD_INFO_NAME "RAMPS 1.4"
+#endif
+
+//
+// Servos
+//
+#ifndef SERVO0_PIN
+  #ifdef IS_RAMPS_13
+    #define SERVO0_PIN                         7
+  #else
+    #define SERVO0_PIN                        11
+  #endif
+#endif
+#ifndef SERVO1_PIN
+  #define SERVO1_PIN                           6
+#endif
+#ifndef SERVO2_PIN
+  #define SERVO2_PIN                           5
+#endif
+#ifndef SERVO3_PIN
+  #define SERVO3_PIN                           4
+#endif
+
+//
+// Limit Switches
+//
+#ifndef X_STOP_PIN
+  #ifndef X_MIN_PIN
+    #define X_MIN_PIN                          3
+  #endif
+  #ifndef X_MAX_PIN
+    #define X_MAX_PIN                         43
+  #endif
+#endif
+#ifndef Y_STOP_PIN
+  #ifndef Y_MIN_PIN
+    #define Y_MIN_PIN                         42
+  #endif
+  #ifndef Y_MAX_PIN
+    #define Y_MAX_PIN                         -1
+  #endif
+#endif
+#ifndef Z_STOP_PIN
+  #ifndef Z_MIN_PIN
+    #define Z_MIN_PIN                         18
+  #endif
+  #ifndef Z_MAX_PIN
+    #define Z_MAX_PIN                         43
+  #endif
+#endif
+
+//
+// Z Probe (when not Z_MIN_PIN)
+//
+#ifndef Z_MIN_PROBE_PIN
+  #define Z_MIN_PROBE_PIN                      2
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            54
+#define X_DIR_PIN                             55
+#define X_ENABLE_PIN                          38
+#ifndef X_CS_PIN
+  #define X_CS_PIN                            53
+#endif
+
+#define Y_STEP_PIN                            60
+#define Y_DIR_PIN                             61
+#define Y_ENABLE_PIN                          56
+#ifndef Y_CS_PIN
+  #define Y_CS_PIN                            49
+#endif
+
+#ifndef Z_STEP_PIN
+  #define Z_STEP_PIN                          46
+#endif
+#define Z_DIR_PIN                             48
+#define Z_ENABLE_PIN                          62
+#ifndef Z_CS_PIN
+  #define Z_CS_PIN                            40
+#endif
+
+#define E0_STEP_PIN                           26
+#define E0_DIR_PIN                            28
+#define E0_ENABLE_PIN                         24
+#ifndef E0_CS_PIN
+  #define E0_CS_PIN                           42
+#endif
+
+#define E1_STEP_PIN                           36
+#define E1_DIR_PIN                            34
+#define E1_ENABLE_PIN                         30
+#ifndef E1_CS_PIN
+  #define E1_CS_PIN                           44
+#endif
+
+//
+// Temperature Sensors
+//
+#ifndef TEMP_0_PIN
+  #define TEMP_0_PIN                          13  // Analog Input
+#endif
+#ifndef TEMP_1_PIN
+  #define TEMP_1_PIN                          15  // Analog Input
+#endif
+#ifndef TEMP_BED_PIN
+  #define TEMP_BED_PIN                        14  // Analog Input
+#endif
+
+//
+// SPI for Max6675 or Max31855 Thermocouple
+//
+#ifndef MAX6675_SS_PIN
+  #define MAX6675_SS_PIN                      66  // Don't use 53 if using Display/SD card (SDSS) or 49 (SD_DETECT_PIN)
+#endif
+
+//
+// Augmentation for auto-assigning RAMPS plugs
+//
+#if NONE(IS_RAMPS_EEB, IS_RAMPS_EEF, IS_RAMPS_EFB, IS_RAMPS_EFF, IS_RAMPS_SF) && !PIN_EXISTS(MOSFET_D)
+  #if HOTENDS > 1
+    #if TEMP_SENSOR_BED
+      #define IS_RAMPS_EEB
+    #else
+      #define IS_RAMPS_EEF
+    #endif
+  #elif TEMP_SENSOR_BED
+    #define IS_RAMPS_EFB
+  #else
+    #define IS_RAMPS_EFF
+  #endif
+#endif
+
+//
+// Heaters / Fans
+//
+#ifndef MOSFET_D_PIN
+  #define MOSFET_D_PIN                        -1
+#endif
+#ifndef RAMPS_D8_PIN
+  #define RAMPS_D8_PIN                         8
+#endif
+#ifndef RAMPS_D9_PIN
+  #define RAMPS_D9_PIN                         9
+#endif
+#ifndef RAMPS_D10_PIN
+  #define RAMPS_D10_PIN                       10
+#endif
+
+#define HEATER_0_PIN               RAMPS_D10_PIN
+
+#if ENABLED(IS_RAMPS_EFB)                         // Hotend, Fan, Bed
+  #define HEATER_BED_PIN            45 //RAMPS_D8_PIN
+#elif ENABLED(IS_RAMPS_EEF)                       // Hotend, Hotend, Fan
+  #define HEATER_1_PIN              RAMPS_D9_PIN
+#elif ENABLED(IS_RAMPS_EEB)                       // Hotend, Hotend, Bed
+  #define HEATER_1_PIN              RAMPS_D9_PIN
+  #define HEATER_BED_PIN            RAMPS_D8_PIN
+#elif ENABLED(IS_RAMPS_EFF)                       // Hotend, Fan, Fan
+  #define FAN1_PIN                  RAMPS_D8_PIN
+#elif DISABLED(IS_RAMPS_SF)                       // Not Spindle, Fan (i.e., "EFBF" or "EFBE")
+  #define HEATER_BED_PIN            RAMPS_D8_PIN
+  #if HOTENDS == 1
+    #define FAN1_PIN                MOSFET_D_PIN
+  #else
+    #define HEATER_1_PIN            MOSFET_D_PIN
+  #endif
+#endif
+
+#ifndef FAN_PIN
+  #if EITHER(IS_RAMPS_EFB, IS_RAMPS_EFF)          // Hotend, Fan, Bed or Hotend, Fan, Fan
+    #define FAN_PIN                 RAMPS_D9_PIN
+  #elif EITHER(IS_RAMPS_EEF, IS_RAMPS_SF)         // Hotend, Hotend, Fan or Spindle, Fan
+    #define FAN_PIN                 RAMPS_D8_PIN
+  #elif ENABLED(IS_RAMPS_EEB)                     // Hotend, Hotend, Bed
+    #define FAN_PIN                            4  // IO pin. Buffer needed
+  #else                                           // Non-specific are "EFB" (i.e., "EFBF" or "EFBE")
+    #define FAN_PIN                 RAMPS_D9_PIN
+  #endif
+#endif
+
+//
+// Misc. Functions
+//
+#define SDSS                                  53
+#define LED_PIN                               13
+
+#ifndef FILWIDTH_PIN
+  #define FILWIDTH_PIN                         5  // Analog Input on AUX2
+#endif
+
+// RAMPS 1.4 DIO 4 on the servos connector
+#ifndef FIL_RUNOUT_PIN
+  #define FIL_RUNOUT_PIN                       4
+#endif
+
+#ifndef PS_ON_PIN
+  #define PS_ON_PIN                           12
+#endif
+
+#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN)
+  #if NUM_SERVOS <= 1                             // Prefer the servo connector
+    #define CASE_LIGHT_PIN                     6  // Hardware PWM
+  #elif HAS_FREE_AUX2_PINS
+    #define CASE_LIGHT_PIN                    44  // Hardware PWM
+  #endif
+#endif
+
+//
+// M3/M4/M5 - Spindle/Laser Control
+//
+#if HAS_CUTTER && !defined(SPINDLE_LASER_ENA_PIN)
+  #if !NUM_SERVOS                                 // Use servo connector if possible
+    #define SPINDLE_LASER_ENA_PIN              4  // Pullup or pulldown!
+    #define SPINDLE_LASER_PWM_PIN              6  // Hardware PWM
+    #define SPINDLE_DIR_PIN                    5
+  #elif HAS_FREE_AUX2_PINS
+    #define SPINDLE_LASER_ENA_PIN             40  // Pullup or pulldown!
+    #define SPINDLE_LASER_PWM_PIN             44  // Hardware PWM
+    #define SPINDLE_DIR_PIN                   65
+  #else
+    #error "No auto-assignable Spindle/Laser pins available."
+  #endif
+#endif
+
+//
+// TMC software SPI
+//
+#if ENABLED(TMC_USE_SW_SPI)
+  #ifndef TMC_SW_MOSI
+    #define TMC_SW_MOSI                       66
+  #endif
+  #ifndef TMC_SW_MISO
+    #define TMC_SW_MISO                       44
+  #endif
+  #ifndef TMC_SW_SCK
+    #define TMC_SW_SCK                        64
+  #endif
+#endif
+
+#if HAS_TMC_UART
+  /**
+   * TMC2208/TMC2209 stepper drivers
+   *
+   * Hardware serial communication ports.
+   * If undefined software serial is used according to the pins below
+   */
+  //#define X_HARDWARE_SERIAL Serial1
+  //#define X2_HARDWARE_SERIAL Serial1
+  //#define Y_HARDWARE_SERIAL Serial1
+  //#define Y2_HARDWARE_SERIAL Serial1
+  //#define Z_HARDWARE_SERIAL Serial1
+  //#define Z2_HARDWARE_SERIAL Serial1
+  //#define E0_HARDWARE_SERIAL Serial1
+  //#define E1_HARDWARE_SERIAL Serial1
+  //#define E2_HARDWARE_SERIAL Serial1
+  //#define E3_HARDWARE_SERIAL Serial1
+  //#define E4_HARDWARE_SERIAL Serial1
+
+  //
+  // Software serial
+  //
+
+  #ifndef X_SERIAL_TX_PIN
+    #define X_SERIAL_TX_PIN                   40
+  #endif
+  #ifndef X_SERIAL_RX_PIN
+    #define X_SERIAL_RX_PIN                   63
+  #endif
+  #ifndef X2_SERIAL_TX_PIN
+    #define X2_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef X2_SERIAL_RX_PIN
+    #define X2_SERIAL_RX_PIN                  -1
+  #endif
+
+  #ifndef Y_SERIAL_TX_PIN
+    #define Y_SERIAL_TX_PIN                   59
+  #endif
+  #ifndef Y_SERIAL_RX_PIN
+    #define Y_SERIAL_RX_PIN                   64
+  #endif
+  #ifndef Y2_SERIAL_TX_PIN
+    #define Y2_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef Y2_SERIAL_RX_PIN
+    #define Y2_SERIAL_RX_PIN                  -1
+  #endif
+
+  #ifndef Z_SERIAL_TX_PIN
+    #define Z_SERIAL_TX_PIN                   42
+  #endif
+  #ifndef Z_SERIAL_RX_PIN
+    #define Z_SERIAL_RX_PIN                   65
+  #endif
+  #ifndef Z2_SERIAL_TX_PIN
+    #define Z2_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef Z2_SERIAL_RX_PIN
+    #define Z2_SERIAL_RX_PIN                  -1
+  #endif
+
+  #ifndef E0_SERIAL_TX_PIN
+    #define E0_SERIAL_TX_PIN                  44
+  #endif
+  #ifndef E0_SERIAL_RX_PIN
+    #define E0_SERIAL_RX_PIN                  66
+  #endif
+  #ifndef E1_SERIAL_TX_PIN
+    #define E1_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef E1_SERIAL_RX_PIN
+    #define E1_SERIAL_RX_PIN                  -1
+  #endif
+  #ifndef E2_SERIAL_TX_PIN
+    #define E2_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef E2_SERIAL_RX_PIN
+    #define E2_SERIAL_RX_PIN                  -1
+  #endif
+  #ifndef E3_SERIAL_TX_PIN
+    #define E3_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef E3_SERIAL_RX_PIN
+    #define E3_SERIAL_RX_PIN                  -1
+  #endif
+  #ifndef E4_SERIAL_TX_PIN
+    #define E4_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef E4_SERIAL_RX_PIN
+    #define E4_SERIAL_RX_PIN                  -1
+  #endif
+  #ifndef E5_SERIAL_TX_PIN
+    #define E5_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef E5_SERIAL_RX_PIN
+    #define E5_SERIAL_RX_PIN                  -1
+  #endif
+  #ifndef E6_SERIAL_TX_PIN
+    #define E6_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef E6_SERIAL_RX_PIN
+    #define E6_SERIAL_RX_PIN                  -1
+  #endif
+  #ifndef E7_SERIAL_TX_PIN
+    #define E7_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef E7_SERIAL_RX_PIN
+    #define E7_SERIAL_RX_PIN                  -1
+  #endif
+#endif
+
+//
+// Průša i3 MK2 Multiplexer Support
+//
+#ifndef E_MUX0_PIN
+  #define E_MUX0_PIN                          40  // Z_CS_PIN
+#endif
+#ifndef E_MUX1_PIN
+  #define E_MUX1_PIN                          42  // E0_CS_PIN
+#endif
+#ifndef E_MUX2_PIN
+  #define E_MUX2_PIN                          44  // E1_CS_PIN
+#endif
+
+//////////////////////////
+// LCDs and Controllers //
+//////////////////////////
+
+#if HAS_SPI_LCD
+
+  //
+  // LCD Display output pins
+  //
+  #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
+
+    #define LCD_PINS_RS                       49  // CS chip select /SS chip slave select
+    #define LCD_PINS_ENABLE                   51  // SID (MOSI)
+    #define LCD_PINS_D4                       52  // SCK (CLK) clock
+
+  #elif BOTH(NEWPANEL, PANEL_ONE)
+
+    #define LCD_PINS_RS                       40
+    #define LCD_PINS_ENABLE                   42
+    #define LCD_PINS_D4                       65
+    #define LCD_PINS_D5                       66
+    #define LCD_PINS_D6                       44
+    #define LCD_PINS_D7                       64
+
+  #else
+
+    #if ENABLED(CR10_STOCKDISPLAY)
+
+      #define LCD_PINS_RS                     27
+      #define LCD_PINS_ENABLE                 29
+      #define LCD_PINS_D4                     25
+
+      #if DISABLED(NEWPANEL)
+        #define BEEPER_PIN                    37
+      #endif
+
+    #elif ENABLED(ZONESTAR_LCD)
+
+      #define LCD_PINS_RS                     64
+      #define LCD_PINS_ENABLE                 44
+      #define LCD_PINS_D4                     63
+      #define LCD_PINS_D5                     40
+      #define LCD_PINS_D6                     42
+      #define LCD_PINS_D7                     65
+
+    #else
+
+      #if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306)
+        #define LCD_PINS_DC                   25  // Set as output on init
+        #define LCD_PINS_RS                   27  // Pull low for 1s to init
+        // DOGM SPI LCD Support
+        #define DOGLCD_CS                     16
+        #define DOGLCD_MOSI                   17
+        #define DOGLCD_SCK                    23
+        #define DOGLCD_A0            LCD_PINS_DC
+      #else
+        #define LCD_PINS_RS                   16
+        #define LCD_PINS_ENABLE               17
+        #define LCD_PINS_D4                   23
+        #define LCD_PINS_D5                   25
+        #define LCD_PINS_D6                   27
+      #endif
+
+      #define LCD_PINS_D7                     29
+
+      #if DISABLED(NEWPANEL)
+        #define BEEPER_PIN                    33
+      #endif
+
+    #endif
+
+    #if DISABLED(NEWPANEL)
+      // Buttons attached to a shift register
+      // Not wired yet
+      //#define SHIFT_CLK                     38
+      //#define SHIFT_LD                      42
+      //#define SHIFT_OUT                     40
+      //#define SHIFT_EN                      17
+    #endif
+
+  #endif
+
+  //
+  // LCD Display input pins
+  //
+  #if ENABLED(NEWPANEL)
+
+    #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
+
+      #define BEEPER_PIN                      37
+
+      #if ENABLED(CR10_STOCKDISPLAY)
+        #define BTN_EN1                       17
+        #define BTN_EN2                       23
+      #else
+        #define BTN_EN1                       31
+        #define BTN_EN2                       33
+      #endif
+
+      #define BTN_ENC                         35
+      #ifndef SD_DETECT_PIN
+        #define SD_DETECT_PIN                 49
+      #endif
+      #ifndef KILL_PIN
+        #define KILL_PIN                      41
+      #endif
+
+      #if ENABLED(BQ_LCD_SMART_CONTROLLER)
+        #define LCD_BACKLIGHT_PIN             39
+      #endif
+
+    #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
+
+      #define BTN_EN1                         64
+      #define BTN_EN2                         59
+      #define BTN_ENC                         63
+      #define SD_DETECT_PIN                   42
+
+    #elif ENABLED(LCD_I2C_PANELOLU2)
+
+      #define BTN_EN1                         47
+      #define BTN_EN2                         43
+      #define BTN_ENC                         32
+      #define LCD_SDSS                      SDSS
+      #define KILL_PIN                        41
+
+    #elif ENABLED(LCD_I2C_VIKI)
+
+      #define BTN_EN1                         40  // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
+      #define BTN_EN2                         42
+      #define BTN_ENC                         -1
+
+      #define LCD_SDSS                      SDSS
+      #define SD_DETECT_PIN                   49
+
+    #elif ANY(VIKI2, miniVIKI)
+
+      #define DOGLCD_CS                       45
+      #define DOGLCD_A0                       44
+      #define LCD_SCREEN_ROT_180
+
+      #define BEEPER_PIN                      33
+      #define STAT_LED_RED_PIN                32
+      #define STAT_LED_BLUE_PIN               35
+
+      #define BTN_EN1                         22
+      #define BTN_EN2                          7
+      #define BTN_ENC                         39
+
+      #define SD_DETECT_PIN                   -1  // Pin 49 for display SD interface, 72 for easy adapter board
+      #define KILL_PIN                        31
+
+    #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
+
+      #define DOGLCD_CS                       29
+      #define DOGLCD_A0                       27
+
+      #define BEEPER_PIN                      23
+      #define LCD_BACKLIGHT_PIN               33
+
+      #define BTN_EN1                         35
+      #define BTN_EN2                         37
+      #define BTN_ENC                         31
+
+      #define LCD_SDSS                      SDSS
+      #define SD_DETECT_PIN                   49
+      #define KILL_PIN                        41
+
+    #elif EITHER(MKS_MINI_12864, FYSETC_MINI_12864)
+
+      #define BEEPER_PIN                      37
+      #define BTN_ENC                         35
+      #define SD_DETECT_PIN                   49
+
+      #ifndef KILL_PIN
+        #define KILL_PIN                      41
+      #endif
+
+      #if ENABLED(MKS_MINI_12864)                 // Added in Marlin 1.1.6
+
+        #define DOGLCD_A0                     27
+        #define DOGLCD_CS                     25
+
+        // GLCD features
+        // Uncomment screen orientation
+        //#define LCD_SCREEN_ROT_90
+        //#define LCD_SCREEN_ROT_180
+        //#define LCD_SCREEN_ROT_270
+
+        // not connected to a pin
+        #define LCD_BACKLIGHT_PIN             -1  // 65 (MKS mini12864 can't adjust backlight by software!)
+
+        #define BTN_EN1                       31
+        #define BTN_EN2                       33
+
+      #elif ENABLED(FYSETC_MINI_12864)
+
+        // From https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8
+
+        #define DOGLCD_A0                     16
+        #define DOGLCD_CS                     17
+
+        #define BTN_EN1                       33
+        #define BTN_EN2                       31
+
+        //#define FORCE_SOFT_SPI                  // Use this if default of hardware SPI causes display problems
+                                                  //   results in LCD soft SPI mode 3, SD soft SPI mode 0
+
+        #define LCD_RESET_PIN                 23  // Must be high or open for LCD to operate normally.
+
+        #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
+          #ifndef RGB_LED_R_PIN
+            #define RGB_LED_R_PIN             25
+          #endif
+          #ifndef RGB_LED_G_PIN
+            #define RGB_LED_G_PIN             27
+          #endif
+          #ifndef RGB_LED_B_PIN
+            #define RGB_LED_B_PIN             29
+          #endif
+        #elif ENABLED(FYSETC_MINI_12864_2_1)
+          #define NEOPIXEL_PIN                25
+        #endif
+
+      #endif
+
+    #elif ENABLED(MINIPANEL)
+
+      #define BEEPER_PIN                      42
+      // not connected to a pin
+      #define LCD_BACKLIGHT_PIN               65  // backlight LED on A11/D65
+
+      #define DOGLCD_A0                       44
+      #define DOGLCD_CS                       66
+
+      // GLCD features
+      // Uncomment screen orientation
+      //#define LCD_SCREEN_ROT_90
+      //#define LCD_SCREEN_ROT_180
+      //#define LCD_SCREEN_ROT_270
+
+      #define BTN_EN1                         40
+      #define BTN_EN2                         63
+      #define BTN_ENC                         59
+
+      #define SD_DETECT_PIN                   49
+      #define KILL_PIN                        64
+
+    #elif ENABLED(ZONESTAR_LCD)
+
+      #define ADC_KEYPAD_PIN                  12
+
+    #elif ENABLED(AZSMZ_12864)
+
+      // Pins only defined for RAMPS_SMART currently
+
+    #else
+
+      // Beeper on AUX-4
+      #define BEEPER_PIN                      33
+
+      // Buttons are directly attached to AUX-2
+      #if ENABLED(PANEL_ONE)
+        #define BTN_EN1                       59  // AUX2 PIN 3
+        #define BTN_EN2                       63  // AUX2 PIN 4
+        #define BTN_ENC                       49  // AUX3 PIN 7
+      #else
+        #define BTN_EN1                       37
+        #define BTN_EN2                       35
+        #define BTN_ENC                       31
+      #endif
+
+      #if ENABLED(G3D_PANEL)
+        #define SD_DETECT_PIN                 49
+        #define KILL_PIN                      41
+      #endif
+
+    #endif
+  #endif // NEWPANEL
+
+#endif // HAS_SPI_LCD
+
+#if ENABLED(REPRAPWORLD_KEYPAD)
+  #define SHIFT_OUT                           40
+  #define SHIFT_CLK                           44
+  #define SHIFT_LD                            42
+  #ifndef BTN_EN1
+    #define BTN_EN1                           64
+  #endif
+  #ifndef BTN_EN2
+    #define BTN_EN2                           59
+  #endif
+  #ifndef BTN_ENC
+    #define BTN_ENC                           63
+  #endif
+#endif

Marlin/src/pins/ramps/pins_TRIGORILLA_14.h

@@ -90,6 +90,11 @@
 #define FAN2_PIN                     TG_FAN2_PIN
 #define ORIG_E0_AUTO_FAN_PIN         TG_FAN2_PIN  // Used in Anycubic Kossel example config
 
+#ifdef POWER_OUTAGE_TEST
+  #define OUTAGETEST_PIN       79
+  #define OUTAGECON_PIN        58
+#endif
+
 #include "pins_RAMPS.h"
 
 //

Marlin/src/pins/ramps/pins_TRIGORILLA_CHIRON.h

@@ -0,0 +1,132 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Arduino Mega with RAMPS v1.4 for Anycubic
+ */
+
+#define BOARD_INFO_NAME "Anycubic RAMPS 1.4"
+
+#define IS_RAMPS_EFB
+
+//
+// Servos
+//
+#if MB(TRIGORILLA_14_11)
+  #define SERVO0_PIN                           5
+  #define SERVO1_PIN                           4
+  #define SERVO2_PIN                          11
+  #define SERVO3_PIN                           6
+#endif
+
+//
+// Custom Limit Switches
+//
+//#define ANYCUBIC_4_MAX_PRO_ENDSTOPS
+#if ENABLED(ANYCUBIC_4_MAX_PRO_ENDSTOPS)
+  #define X_MAX_PIN                           43
+  #define Y_MIN_PIN                           19
+#endif
+
+// Labeled pins
+#define TG_HEATER_BED_PIN                      8
+#define TG_HEATER_0_PIN                       10
+#define TG_HEATER_1_PIN                       45  // Anycubic Kossel: Unused
+
+#define TG_FAN0_PIN                            9  // Anycubic Kossel: Usually the part cooling fan
+#define TG_FAN1_PIN                            7  // Anycubic Kossel: Unused
+#define TG_FAN2_PIN                           44  // Anycubic Kossel: Hotend fan
+#define CONTROLLER_FAN_PIN  		              TG_FAN1_PIN
+#define FIL_RUNOUT_PIN                        19
+#define BEEPER_PIN                            31
+#define SDSS                                  53
+#define LED_PIN                               13
+#define SD_DETECT_PIN                         49
+// Remap MOSFET pins to common usages:
+
+#define RAMPS_D10_PIN            TG_HEATER_0_PIN  // HEATER_0_PIN is always RAMPS_D10_PIN in pins_RAMPS.h
+
+#if HOTENDS > 1                                   // EEF and EEB
+  #define RAMPS_D9_PIN           TG_HEATER_1_PIN
+  #if !TEMP_SENSOR_BED
+    // EEF
+    #define RAMPS_D8_PIN             TG_FAN0_PIN
+  #else
+    // EEB
+    #define RAMPS_D8_PIN       TG_HEATER_BED_PIN
+    #define FAN_PIN                  TG_FAN0_PIN  // Override pin 4 in pins_RAMPS.h
+  #endif
+#elif TEMP_SENSOR_BED
+  // EFB (Anycubic Kossel default)
+  #define RAMPS_D9_PIN               TG_FAN0_PIN
+  #define RAMPS_D8_PIN         TG_HEATER_BED_PIN
+#else
+  // EFF
+  #define RAMPS_D9_PIN               TG_FAN1_PIN
+  #define RAMPS_D8_PIN               TG_FAN0_PIN
+#endif
+
+#if HOTENDS > 1 || TEMP_SENSOR_BED                // EEF, EEB, EFB
+  #define FAN1_PIN                   TG_FAN1_PIN
+#endif
+#define FAN2_PIN                     TG_FAN2_PIN
+#define ORIG_E0_AUTO_FAN_PIN         TG_FAN2_PIN  // Used in Anycubic Kossel example config
+
+#ifdef POWER_OUTAGE_TEST
+  #define OUTAGETEST_PIN       79
+  #define OUTAGECON_PIN        58
+#endif
+
+#include "pins_RAMPS_CHIRON.h"
+
+//
+// AnyCubic made the following changes to 1.1.0-RC8
+// If these are appropriate for your LCD let us know.
+//
+#if 0 && HAS_SPI_LCD
+
+  // LCD Display output pins
+  #if BOTH(NEWPANEL, PANEL_ONE)
+    #undef LCD_PINS_D6
+    #define LCD_PINS_D6                       57
+  #endif
+
+  // LCD Display input pins
+  #if ENABLED(NEWPANEL)
+    #if ANY(VIKI2, miniVIKI)
+      #undef DOGLCD_A0
+      #define DOGLCD_A0                       23
+    #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
+      #undef BEEPER_PIN
+      #define BEEPER_PIN                      33
+      #undef LCD_BACKLIGHT_PIN
+      #define LCD_BACKLIGHT_PIN               67
+    #endif
+  #elif ENABLED(MINIPANEL)
+    #undef BEEPER_PIN
+    #define BEEPER_PIN                        33
+    #undef DOGLCD_A0
+    #define DOGLCD_A0                         42
+  #endif
+
+#endif // HAS_SPI_LCD

Marlin/src/sd/cardreader.cpp

@@ -34,6 +34,11 @@
 #include "../gcode/queue.h"
 #include "../module/configuration_store.h"
 
+#if defined(POWER_OUTAGE_TEST)
+extern unsigned char PowerTestFlag;
+extern char seekdataflag;
+#endif
+
 #if ENABLED(EMERGENCY_PARSER)
   #include "../feature/e_parser.h"
 #endif

Marlin/src/sd/cardreader.h

@@ -153,6 +153,7 @@ public:
   static inline int16_t get() { sdpos = file.curPosition(); return (int16_t)file.read(); }
   static inline int16_t read(void* buf, uint16_t nbyte) { return file.isOpen() ? file.read(buf, nbyte) : -1; }
   static inline int16_t write(void* buf, uint16_t nbyte) { return file.isOpen() ? file.write(buf, nbyte) : -1; }
+  static inline long GetLastSDpos() { return sdpos; };
 
   static Sd2Card& getSd2Card() { return sd2card; }
 

README.md

@@ -1,89 +1,145 @@
-# Knutwurst's i3 MEGA S Firmware (based on Marlin 2.0.5.3)
+# Knutwurst's i3 MEGA M/S/P/X und Chiron Firmware <br>(based on Marlin 2.0.x)
 
-## Readme - German (english below)
+<span style="color: red;">(BITTE GENAU DURCHLESEN! / PLEASE READ CAREFULLY!)</span>
 
----
+### Wenn dir gefällt, was ich mache, kannst du mir hier einen Kaffee spendieren*: [![Donate](https://img.shields.io/badge/Donate-PayPal-green.svg)](https://paypal.me/oliverkoester)
+<sub>*Es muss jetzt keine großzügige Spende sein. Ein paar Cent reichen um mir zu zeigen, wer überhaupt Interesse daran hat und wem die Weiterentwicklung wichtig ist. So bleibt die Motivation da und ich weiß einfach, dass ich nicht für die Tonne programmiere ;)<sub>
 
-Diese Firmwarekonfiguration aktiviert viele neue erweitere Funktionen der Marlin Firmware:
 
- * Mesh-Bed Kalibrierung
+Wenn Du Fragen hast, schaue gern in der offiziellen [Facebook-Gruppe](https://www.facebook.com/groups/3094090037303577/) vorbei.
+
+
+# Inhaltsverzeichnis (Deutsch)
+<b>WARNUNG:</b> Der Mega Pro / Mega P Support befindet sich noch in der Entwicklung. Aktuell wird der Laser noch nicht unterstützt, ebensowenig wie das Piezo-Leveling!
+
+- [Funktionen](#funktionen)
+- [Häufig gestellte Fragen (FAQ)](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/FAQ-(deutsch))
+- [Fotos / Bilder](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/Pictures)
+- [Downloads](#downloads)
+
+
+# Table of Contents (English)
+<b>WARNING:</b> The Mega Pro / Mega P support is still under development. The laser is currently not supported, nor is piezo leveling!
+
+- [Features](#features)
+- [Frequently asked questions (FAQ)](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/FAQ-(english))
+- [Photos / Pictures](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/Pictures)
+- [Download](#download)
+
+
+# Readme - German
+
+## Funktionen
+
+ * 4-Punkt Leveling-Hilfe "Easy Leveling"
+ * Mesh-Bed Kalibrierung / Autokalibrierung mit [BLTouch (Installations-Anleitung)](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/BLTouch-Installation-(deutsch))
  * S-Kurven Beschleunigung
- * "Juction Deviation" statt des klassischen "Jerk" 
+ * "Linear Pressure Control v1.5" aktiviert (kann mit M900 konfiguriert werden)
  * Babystepping während des Druckvorgangs
- * Biliniar Bed Leveling (BBL)
+ * Bilinear Bed Leveling (BBL)
  * Manuelles Editieren der Messpunkte
- * Volle Anycubic Touchscreen Unterstützung
+ * Volle Unterstützung aller [Anycubic Touchscreens](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/Types-of-Anycubic-Touchscreens)
+ * Bauteilkühler läuft nun auf 100% statt maximal 70%
  * Pause & Filamentwechselfunktion
-
-Besser im Vergleich zu anderen Firmwares (Bugfixes):
- * Aufgeräumtes Special-Menü
- * Drucker hängt sich nicht auf, wenn man Dateien mit Sonderzeichen (oder Chinesisch) auf der SD Karte hat
- * Kein dummes "wackeln" der Düse nach Stoppen eines Druckvorgangs
- * Kein Abstürzen bei zu vielen Dateien auf der SD Karte
- * Kein Abstürzen bei SD-Karten über 16 GB
- * Fehler "Melodie" bei Thermal Runaway Protection
- * Kein Aufhängen, wenn SD Karte + USB gleichzeitig genutzt wird
- * Kein Aufhängen wenn man Pause drückt
- * Kein Aufhängen, wenn das Filament leer ist.
-
-Bevor du irgendwas machst, nachdem du die Firmware geupdated hast, gehe zu `Special Menu > Load FW Defaults` um alte Einstellungen zu löschen!
-
----
-
-### FAQ:
-
->Knutwurst, wieso machst du auch noch so eine Firmware? Es gibt doch schon so viele?
-
-Weil ich bisher keine gesehen habe, die nicht die blöden Bugs enthält, wie z.B. dass sie abszürzt, wenn man Dateien mit Sonderzeichen auf der SD Karte hat.
-
-
->Ist deine Firmware besser als andere?
-
-Nein. Aber sicher auch nicht schlechter.
-
-
->Wo sind die Downloads?
-
-Weiter unten.
-
-
->Muss ich bei TMC Treibern die Stecker drehen?
-
-Nö. Lade dir einfach die korrekte Version herunter.
-
-
->Welche TMC Motortreiber sollte ich kaufen? Lieber die V2 oder die Bigtreetech V3?
-
-Weder noch! Es gibt keine "V2" oder "V3". Die offizielle letzte Version von Trinamic ist v1.2 und die beiden großen priämären Hersteller für die echten SilentStepSticks sind FYSTEC und WATTERROTT. Lass bloß die Finger von Bigtreetech.
-
-
->Als ich die Treiber eingebaut habe, qualmte mein Mainboard in der Mitte rechts. Ist das normal?
-
-Nein. Du hast die Treiber falsch herum eingebaut. Jetzt ist die Z-Diode (733A) verbrannt. Tausche sie aus und alles funktioniert wieder. Deine falsch gesteckten Treiber kannst du aber vermutlich wegschmeißen.
-
-
->Muss ich wie bei anderen Firmwares noch die E-Steps einstellen, wenn ich einen Mega S besitze?
-
-Nein, lade dir einfach die korrekte Version herunter. Trotzdem solltest du die Steps noch kalibrieren.
+ * Automatische EEPROM Initialisierung
+ * Filament Runout Sensor kann im Menü temporär deaktiviert werden
+ * [Druckbettgröße erweitert auf 225 x 220 x 210 mm](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/Set-new-print-bed-size)
+ * Automatischer 'Slowdown', falls Daten nicht schnell genug fließen
+ * Vollautomatisches Hotend und Ultrabase PID Tuning
+ * Optimierungen für [Trinamic TMC Schrittmotortreiber](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/Schrittmotortreiber-gegen-TMC2xxx-tauschen)
 
 
 ---
 
-### Download
+# Downloads
 
-Du kannst die fertigen Binärdateien hier herunterladen: https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/releases. Natürlich kannst du die Firmware mit PlatformIO oder der Arduino IDE auch selbst kompilieren.
+Du kannst die fertigen Binärdateien hier herunterladen: https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/releases. Natürlich kannst du die Firmware mit PlatformIO auch [selbst kompilieren](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/Howto:-Compile-Firmware-with-PlatformIO).
 
--> `i3_Mega.hex` ist für den unmodifizierten originalen Anycubic i3 MEGA (ohne S).
+Um es übersichtlich zu gestalten, beinhalten die Dateinamen die einzelnen Features.
 
--> `i3_Mega_TMC.hex` hat Optimierungen und invertierte Ausgänge für TMC2100 and TMC2208 Motortreiber.
+<b>Das Fehlen von Zusätzen (z.B. MEGA_1.0.0.hex) bedeutet, dass die Firmware für den "normalen" i3 Mega gedacht ist, an dem keine Veränderungen vorgenommen wurden.</b>
 
--> `i3_Mega_S.hex` wird verwendet, wenn du den neuere "S" Version mit Titan-Extruder verwendest.
+`_1G` steht für die erste Generation des i3 Mega mit nur einem Z Endstop. Diese Firmware ist nicht für den normalen i3 Mega geeignet!
 
--> `i3_Mega_S_TMC.hex` benutzt du, wenn du sowohl die "S" Version mit Titan-Extruder und TMC Motortreiber verwendest.
+`_S` steht für den Mega S mit dem Titan Extruder.
+
+`_P` steht für den Mega P mit dem BMG Extruder.
+
+`_X` steht für den Mega X.
+
+`_TMC` steht für Trinamic TMC Motortreiber. Hierbei wird die Drehrichtung der Motoren invertiert. Sollten die Stecker der Motoren jedoch bereits gedreht sein, nimmt man einfach die Nicht-TMC Version.
+
+`_DGUS` steht für das "neue" blau/gelbe DGUS II Display, welches sonst kein Special-Menü anzeigen kann. (Nur für MEGA S relevant)
+
+`_BLT` steht für die BL-Touch Version mit Autoleveling-Sensor. Das manuelle Mesh-Leveling ist hier deaktiviert.
+
+`_10` steht für das Trigorilla_14 v1.0 Mainboard, welches normalerweise der Standard sein sollte. (nur für BLTouch relevant)
+
+`_11` steht für das Trigorilla_14 v1.1 Mainboard, bei welchem sich die Pinbelegung für den Servo-Port geändert hat. (nur für BLTouch relevant)
+
+<b>Anmerkung: Die Mainboard-Version 1.0 oder 1.1 ist nur für den Einbau des BLTouch Sensors relevant und kann normalerweise ignoriert werden.</b>
 
 
+Für (fast) jede Kombination gibt es eine passende Firmware im Download-Bereich. ;)
+
+---
+
+### If you like what I do you can buy me a coffee: [![Donate](https://img.shields.io/badge/Donate-PayPal-green.svg)](https://paypal.me/oliverkoester)
+<sub>*It doesn't have to be a generous donation. A few cents are enough to show me who is interested in further development. So the motivation stays and I just know that I am not programming for the bin ;)<sub>
+
+# Readme - English
+
+## Features:
+
+ * 4-Point Leveling-Assistant "Easy Leveling"
+ * Mesh bed calibration / Auto calibration with [BLTouch (Installation Manual)](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/BLTouch-Installation-(english))
+ * S-curve acceleration
+ * "Linear Pressure Control v1.5" activated (can be configured with M900)
+ * Baby stepping during the printing process
+ * Bilinear Bed Leveling (BBL)
+ * Manual editing of the measuring points
+ * Full Support for all [Anycubic Touchscreens](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/Types-of-Anycubic-Touchscreens)
+ * Part cooling fan now runs at 100% instead of 70%
+ * Pause & filament change function
+ * Automatic EEPROM initialization
+ * Filament runout sensor can be temporarily deactivated in the menu
+ * [Print bed size enlarged to 225 x 220 x 210 mm](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/Set-new-print-bed-size)
+ * Automatic 'slowdown' if data does not flow fast enough
+ * Fully automatic hotend and ultrabase PID tuning
+ * Optimizations for [Trinamic TMC Stepper drivers](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/Swap-stepper-motor-driver-for-TMC2xxx)
+
+---
+
+# Download
+
+You can download the precompiled binary files from here: https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/releases. Of course you can also [compile the firmware yourself](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/Howto:-Compile-Firmware-with-PlatformIO) with PlatformIO.
+
+In order to make it clear, the file names contain the individual features.
+
+<b>The lack of additions (e.g. MEGA_1.0.0.hex) means that the firmware is intended for the "normal" i3 Mega on which no changes have been made.</b>
+
+`_1G` stands for the firt generation i3 Mega with only one Z endstop. Do NOT use this Firmware on the regular i3 Mega!
+
+`_S` stands for the Mega S with the titan extruder.
+
+`_P` stands for the Mega P with the BMG extruder.
+
+`_X` stands for the Mega X.
+
+`_TMC` stands for Trinamic TMC motor driver. The direction of rotation of the motors is inverted. However, if the plugs of the motors are already turned, you simply take the non-TMC version. 
+
+`_DGUS` stands for the "new" blue / yellow DGUS II display, which otherwise cannot show a special menu. (Only relevant for MEGA S)
+
+`_BLT` stands for the BL-Touch version with auto-leveling sensor. Manual mesh leveling is deactivated here.
+
+`_10` stands for the Trigorilla_14 v1.0 mainboard, which should normally be the standard. (Only relevant for BLTouch)
+
+`_11` stands for the Trigorilla_14 v1.1 mainboard, on which the pin assignment for the servo port has changed. (Only relevant for BLTouch)
+
+<b>Note: The mainboard version 1.0 or 1.1 is only relevant for the installation of the BLTouch sensor and can normally be ignored.</b>
+
+For (almost) every combination there is a suitable firmware in the download area. ;)
 
 
-## Readme - English
-
-- coming soon -
+### If you like what I do you can buy me a coffee: [![Donate](https://img.shields.io/badge/Donate-PayPal-green.svg)](https://paypal.me/oliverkoester)
+<sub>*It doesn't have to be a generous donation. A few cents are enough to show me who is interested in further development. So the motivation stays and I just know that I am not programming for the bin ;)<sub>

deploy_firmware_files.sh

@@ -0,0 +1,27 @@
+#!/bin/bash
+
+BASE_PATH="$( cd "$( dirname "${BASH_SOURCE[0]}" )" >/dev/null 2>&1 && pwd )"
+CURRENT_USER="$(whoami)"
+
+VERSION_FILE="$BASE_PATH/Marlin/src/inc/Version.h"
+FIRMWARE_FOLDER="$BASE_PATH/.pio/build/"
+OUTPUT_FOLDER="/Users/$CURRENT_USER/Desktop/i3_FIRMWARE"
+
+CUSTOM_BUILD_VERSION=$(egrep -o "([0-9]{1,}\.)+[a-zA-Z0-9_.-]{1,}" $VERSION_FILE -m2 | tail -n1)
+
+if [ -d "$$OUTPUT_FOLDER/v$CUSTOM_BUILD_VERSION" ]; then
+    echo "$$OUTPUT_FOLDER/$CUSTOM_BUILD_VERSION already exists."
+else 
+    mkdir -p $OUTPUT_FOLDER/$CUSTOM_BUILD_VERSION
+fi
+
+echo "Knutwurst's Mega Firmware Version: $CUSTOM_BUILD_VERSION"
+
+pushd $FIRMWARE_FOLDER
+  for dir in $FIRMWARE_FOLDER/*/
+  do
+      dir=${dir%*/}
+      echo ${dir##*/}
+      cp ${dir##*/}/firmware.hex /$OUTPUT_FOLDER/$CUSTOM_BUILD_VERSION/${dir##*/}_v$CUSTOM_BUILD_VERSION.hex
+  done
+popd

i3_mega_envs.ini

@@ -0,0 +1,505 @@
+#
+#  i3 Mega (First generation with only one endstop)
+#
+
+[env:MEGA_1G]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_ONE_Z_ENDSTOP
+build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_CHIRON
+
+[env:MEGA_1G_TMC]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP
+build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH -DKNUTWURST_CHIRON
+
+[env:MEGA_1G_BLT_10]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP
+build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_CHIRON
+
+[env:MEGA_1G_BLT_11]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP
+build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_CHIRON
+
+[env:MEGA_1G_TMC_BLT_10]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP
+build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_CHIRON
+
+[env:MEGA_1G_TMC_BLT_11]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP
+build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_CHIRON
+
+
+#
+#  i3 Mega (normal Version)
+#
+
+[env:MEGA]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA
+build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_TMC]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_TMC
+build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_BLT_10]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_BLT_11]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_TMC_BLT_10]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_TMC_BLT_11]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+
+
+#
+#  i3 Mega S
+#
+[env:MEGA_S]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_S_TMC]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_TMC
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_S_BLT_10]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_S_BLT_11]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_S -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_S_TMC_BLT_10]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_S_TMC_BLT_11]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_S -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+
+
+#
+#  i3 Mega S (new TFT)
+#
+[env:MEGA_S_DGUS]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_S_DGUS_TMC]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_S_DGUS_BLT_10]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_S_DGUS_BLT_11]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_S_DGUS_TMC_BLT_10]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_S_DGUS_TMC_BLT_11]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+
+
+#
+#  i3 Mega X
+#
+[env:MEGA_X]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_X_TMC]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_TMC
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_X_BLT_10]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_X_BLT_11]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_X -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_X_TMC_BLT_10]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_X_TMC_BLT_11]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+
+#
+#  i3 Mega X (new TFT)
+#
+[env:MEGA_X_DGUS]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_X_DGUS_TMC]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_X_DGUS_BLT_10]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_X_DGUS_BLT_11]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_X_DGUS_TMC_BLT_10]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_X_DGUS_TMC_BLT_11]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+
+
+
+#
+#  i3 Mega P
+#
+[env:MEGA_P]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_P -DKNUTWURST_BMG -DKNUTWURST_DGUS2_TFT
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_P_TMC]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_BMG -DKNUTWURST_DGUS2_TFT
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_P_BLT_10]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_P -DKNUTWURST_BMG -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_P_BLT_11]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_P -DKNUTWURST_BMG -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_P_TMC_BLT_10]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_P -DKNUTWURST_BMG -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_P_TMC_BLT_11]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_P -DKNUTWURST_BMG -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT 
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+
+#
+#  Chiron
+#
+
+[env:CHIRON]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_CHIRON -DKNUTWURST_CHIRON
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP
+
+[env:CHIRON_TMC]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_CHIRON -DKNUTWURST_CHIRON -DKNUTWURST_TMC
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP
+
+
+#
+#  Chiron (new TFT)
+#
+
+[env:CHIRON_DGUS]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_CHIRON -DKNUTWURST_CHIRON -DKNUTWURST_DGUS2_TFT
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP
+
+[env:CHIRON_DGUS_TMC]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_CHIRON -DKNUTWURST_CHIRON -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP
+
+

platformio.ini

@@ -0,0 +1,922 @@
+#
+# Marlin Firmware
+# PlatformIO Configuration File
+#
+# For detailed documentation with EXAMPLES:
+#
+# http://docs.platformio.org/en/latest/projectconf.html
+#
+
+# Automatic targets - enable auto-uploading
+# targets = upload
+
+#
+# By default platformio build will abort after 5 errors.
+# Remove '-fmax-errors=5' from build_flags below to see all.
+#
+
+
+
+# *******************************************************************************************
+# **                                                                                       **
+# **   If you want to select a specific configuration for your                             **
+# **   printer, just open the PlatformIO tab on the left, select                           **
+# **   PROJECT TASKS and then "env:i3_MEGA*" (your desired config)                         **
+# **   From there you can build and upload your code.                                      **
+# **                                                                                       **
+# *******************************************************************************************
+
+[platformio]
+src_dir      = Marlin
+boards_dir   = buildroot/share/PlatformIO/boards
+extra_configs = i3_mega_envs.ini
+default_envs =
+  MEGA_1G
+  MEGA_1G_TMC
+  MEGA_1G_BLT_10
+  MEGA_1G_BLT_11
+  MEGA_1G_TMC_BLT_10
+  MEGA_1G_TMC_BLT_11
+  MEGA
+  MEGA_TMC
+  MEGA_BLT_10
+  MEGA_BLT_11
+  MEGA_TMC_BLT_10
+  MEGA_TMC_BLT_11
+  MEGA_S
+  MEGA_S_TMC
+  MEGA_S_BLT_10
+  MEGA_S_BLT_11
+  MEGA_S_TMC_BLT_10
+  MEGA_S_TMC_BLT_11
+  MEGA_S_DGUS
+  MEGA_S_DGUS_TMC
+  MEGA_S_DGUS_BLT_10
+  MEGA_S_DGUS_BLT_11
+  MEGA_S_DGUS_TMC_BLT_10
+  MEGA_S_DGUS_TMC_BLT_11
+  MEGA_X
+  MEGA_X_TMC
+  MEGA_X_BLT_10
+  MEGA_X_BLT_11
+  MEGA_X_TMC_BLT_10
+  MEGA_X_TMC_BLT_11
+  MEGA_X_DGUS
+  MEGA_X_DGUS_TMC
+  MEGA_X_DGUS_BLT_10
+  MEGA_X_DGUS_BLT_11
+  MEGA_X_DGUS_TMC_BLT_10
+  MEGA_X_DGUS_TMC_BLT_11
+  MEGA_P
+  MEGA_P_TMC
+  MEGA_P_BLT_10
+  MEGA_P_BLT_11
+  MEGA_P_TMC_BLT_10
+  MEGA_P_TMC_BLT_11
+  CHIRON
+  CHIRON_TMC
+  CHIRON_DGUS
+  CHIRON_DGUS_TMC
+
+# *******************************************************************************************
+# **                                                                                       **
+# **   If you want to select a specific configuration for your                             **
+# **   printer, just open the PlatformIO tab on the left, select                           **
+# **   PROJECT TASKS and then "env:i3_MEGA*" (your desired config)                         **
+# **   From there you can build and upload your code.                                      **
+# **                                                                                       **
+# *******************************************************************************************
+
+
+
+[common]
+default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
+extra_scripts = pre:buildroot/share/PlatformIO/scripts/common-cxxflags.py
+build_flags = -fmax-errors=5 -g -D__MARLIN_FIRMWARE__ -fmerge-all-constants
+lib_deps =
+  LiquidCrystal@1.5.0
+  TMCStepper@~0.7.1
+  Adafruit NeoPixel@1.5.0
+  U8glib-HAL@0.4.1
+  Adafruit MAX31865 library@~1.1.0
+  LiquidTWI2@1.2.7
+  Arduino-L6470@0.8.0
+  SlowSoftI2CMaster
+  SailfishLCD=https://github.com/mikeshub/SailfishLCD/archive/master.zip
+  SailfishRGB_LED=https://github.com/mikeshub/SailfishRGB_LED/archive/master.zip
+
+# Globally defined properties
+# inherited by all environments
+[env]
+framework     = arduino
+build_flags   = ${common.build_flags}
+lib_deps      = ${common.lib_deps}
+monitor_speed = 250000
+
+#################################
+#                               #
+#   Unique Core Architectures   #
+#                               #
+#  Add a new "env" below if no  #
+# entry has values suitable to  #
+#   build for a given board.    #
+#                               #
+#################################
+
+#
+# ATmega2560
+#
+[env:mega2560]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+
+#
+# ATmega1280
+#
+[env:mega1280]
+platform          = atmelavr
+board             = megaatmega1280
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+
+#
+# RAMBo
+#
+[env:rambo]
+platform          = atmelavr
+board             = reprap_rambo
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+
+#
+# FYSETC F6 V1.3
+#
+[env:FYSETC_F6_13]
+platform          = atmelavr
+board             = fysetc_f6_13
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+
+#
+# FYSETC F6 V1.4
+#
+[env:FYSETC_F6_14]
+platform          = atmelavr
+board             = fysetc_f6_14
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+
+#
+# Sanguinololu (ATmega644p)
+#
+[env:sanguino644p]
+platform      = atmelavr
+board         = sanguino_atmega644p
+lib_deps      = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter    = ${common.default_src_filter} +<src/HAL/AVR>
+
+#
+# Sanguinololu (ATmega1284p)
+#
+[env:sanguino1284p]
+platform      = atmelavr
+board         = sanguino_atmega1284p
+lib_deps      = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter    = ${common.default_src_filter} +<src/HAL/AVR>
+
+#
+# Melzi and clones (ATmega1284p)
+#
+[env:melzi]
+platform      = atmelavr
+board         = sanguino_atmega1284p
+lib_deps      = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter    = ${common.default_src_filter} +<src/HAL/AVR>
+lib_ignore    = TMCStepper
+upload_speed  = 57600
+
+#
+# Melzi and clones (Optiboot bootloader)
+#
+[env:melzi_optiboot]
+platform      = atmelavr
+board         = sanguino_atmega1284p
+lib_deps      = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter    = ${common.default_src_filter} +<src/HAL/AVR>
+lib_ignore    = TMCStepper
+upload_speed  = 115200
+
+#
+# AT90USB1286 boards using CDC bootloader
+# - BRAINWAVE
+# - BRAINWAVE_PRO
+# - SAV_MKI
+# - TEENSYLU
+#
+[env:at90usb1286_cdc]
+platform      = teensy
+board         = at90usb1286
+lib_deps      = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+lib_ignore    = TMCStepper
+src_filter    = ${common.default_src_filter} +<src/HAL/AVR>
+
+#
+# AT90USB1286 boards using DFU bootloader
+# - PrintrBoard
+# - PrintrBoard Rev.F
+# - ? 5DPRINT ?
+#
+[env:at90usb1286_dfu]
+platform      = teensy
+board         = at90usb1286
+lib_deps      = ${common.lib_deps}
+lib_ignore    = TMCStepper
+src_filter    = ${common.default_src_filter} +<src/HAL/AVR>
+
+#
+# Due (Atmel SAM3X8E ARM Cortex-M3)
+#
+#  - RAMPS4DUE
+#  - RADDS
+#
+[env:DUE]
+platform      = atmelsam
+board         = due
+src_filter    = ${common.default_src_filter} +<src/HAL/DUE>
+
+[env:DUE_USB]
+platform      = atmelsam
+board         = dueUSB
+src_filter    = ${common.default_src_filter} +<src/HAL/DUE>
+
+[env:DUE_debug]
+# Used when WATCHDOG_RESET_MANUAL is enabled
+platform      = atmelsam
+board         = due
+src_filter    = ${common.default_src_filter} +<src/HAL/DUE>
+build_flags   = ${common.build_flags}
+  -funwind-tables
+  -mpoke-function-name
+
+#
+# NXP LPC176x ARM Cortex-M3
+#
+[env:LPC1768]
+platform          = https://github.com/p3p/pio-nxplpc-arduino-lpc176x/archive/0.1.2.zip
+board             = nxp_lpc1768
+build_flags       = -DU8G_HAL_LINKS -IMarlin/src/HAL/LPC1768/include -IMarlin/src/HAL/LPC1768/u8g ${common.build_flags}
+# debug options for backtrace
+#  -funwind-tables
+#  -mpoke-function-name
+lib_ldf_mode      = off
+lib_compat_mode   = strict
+extra_scripts     = Marlin/src/HAL/LPC1768/upload_extra_script.py
+src_filter        = ${common.default_src_filter} +<src/HAL/LPC1768>
+lib_deps          = Servo
+  LiquidCrystal@1.0.0
+  U8glib-HAL@0.4.1
+  TMCStepper@~0.7.1
+  Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/1.5.0.zip
+  SailfishLCD=https://github.com/mikeshub/SailfishLCD/archive/master.zip
+
+[env:LPC1769]
+platform          = https://github.com/p3p/pio-nxplpc-arduino-lpc176x/archive/0.1.2.zip
+board             = nxp_lpc1769
+build_flags       = -DU8G_HAL_LINKS -IMarlin/src/HAL/LPC1768/include -IMarlin/src/HAL/LPC1768/u8g ${common.build_flags}
+# debug options for backtrace
+#  -funwind-tables
+#  -mpoke-function-name
+lib_ldf_mode      = off
+lib_compat_mode   = strict
+extra_scripts     = Marlin/src/HAL/LPC1768/upload_extra_script.py
+src_filter        = ${common.default_src_filter} +<src/HAL/LPC1768>
+lib_deps          = Servo
+  LiquidCrystal@1.0.0
+  U8glib-HAL@0.4.1
+  TMCStepper@~0.7.1
+  Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/1.5.0.zip
+  SailfishLCD=https://github.com/mikeshub/SailfishLCD/archive/master.zip
+
+#
+# STM32F103RC
+#
+[env:STM32F103RC]
+platform          = ststm32@<6.2.0
+board             = genericSTM32F103RC
+platform_packages = tool-stm32duino
+build_flags       = !python Marlin/src/HAL/STM32F1/build_flags.py
+  ${common.build_flags} -std=gnu++14
+build_unflags     = -std=gnu++11
+src_filter        = ${common.default_src_filter} +<src/HAL/STM32F1>
+lib_deps          = ${common.lib_deps}
+  SoftwareSerialM=https://github.com/FYSETC/SoftwareSerialM/archive/master.zip
+lib_ignore        = Adafruit NeoPixel, SPI
+monitor_speed     = 115200
+
+#
+# STM32F103RC_fysetc
+#
+[env:STM32F103RC_fysetc]
+platform          = ststm32@<6.2.0
+board             = genericSTM32F103RC
+#board_build.core = maple
+platform_packages = tool-stm32duino
+build_flags       = !python Marlin/src/HAL/STM32F1/build_flags.py
+  ${common.build_flags} -std=gnu++14 -DDEBUG_LEVEL=0 -DHAVE_SW_SERIAL
+build_unflags     = -std=gnu++11
+extra_scripts     = buildroot/share/PlatformIO/scripts/STM32F103RC_fysetc.py
+src_filter        = ${common.default_src_filter} +<src/HAL/STM32F1>
+lib_deps          = ${common.lib_deps}
+  SoftwareSerialM=https://github.com/FYSETC/SoftwareSerialM/archive/master.zip
+lib_ignore        = Adafruit NeoPixel, SPI
+lib_ldf_mode      = chain
+debug_tool        = stlink
+upload_protocol   = serial
+
+#
+# BigTree SKR Mini V1.1 / SKR mini E3 / SKR E3 DIP (STM32F103RCT6 ARM Cortex-M3)
+#
+#   STM32F103RC_btt ............. RCT6 with 256K
+#   STM32F103RC_btt_USB ......... RCT6 with 256K (USB mass storage)
+#   STM32F103RC_btt_512K ........ RCT6 with 512K
+#   STM32F103RC_btt_512K_USB .... RCT6 with 512K (USB mass storage)
+#
+
+[env:STM32F103RC_btt]
+platform          = ststm32@<6.2.0
+board             = genericSTM32F103RC
+platform_packages = tool-stm32duino
+build_flags       = !python Marlin/src/HAL/STM32F1/build_flags.py
+  ${common.build_flags} -DDEBUG_LEVEL=0 -std=gnu++14 -DHAVE_SW_SERIAL -DSS_TIMER=4
+build_unflags     = -std=gnu++11
+extra_scripts     = buildroot/share/PlatformIO/scripts/STM32F103RC_SKR_MINI.py
+src_filter        = ${common.default_src_filter} +<src/HAL/STM32F1>
+lib_deps          = ${common.lib_deps}
+  SoftwareSerialM=https://github.com/FYSETC/SoftwareSerialM/archive/master.zip
+  USBComposite for STM32F1@==0.91
+lib_ignore        = Adafruit NeoPixel, SPI
+monitor_speed     = 115200
+
+[env:STM32F103RC_btt_USB]
+platform          = ststm32@<6.2.0
+board             = genericSTM32F103RC
+platform_packages = tool-stm32duino
+build_flags       = !python Marlin/src/HAL/STM32F1/build_flags.py
+  ${common.build_flags} -DDEBUG_LEVEL=0 -std=gnu++14 -DHAVE_SW_SERIAL -DSS_TIMER=4 -DUSE_USB_COMPOSITE
+build_unflags     = -std=gnu++11
+extra_scripts     = buildroot/share/PlatformIO/scripts/STM32F103RC_SKR_MINI.py
+src_filter        = ${common.default_src_filter} +<src/HAL/STM32F1>
+lib_deps          = ${common.lib_deps}
+  SoftwareSerialM=https://github.com/FYSETC/SoftwareSerialM/archive/master.zip
+  USBComposite for STM32F1@==0.91
+lib_ignore        = Adafruit NeoPixel, SPI
+monitor_speed     = 115200
+
+[env:STM32F103RC_btt_512K]
+platform          = ststm32@<6.2.0
+board             = genericSTM32F103RC
+board_upload.maximum_size=524288
+platform_packages = tool-stm32duino
+build_flags       = !python Marlin/src/HAL/STM32F1/build_flags.py
+  ${common.build_flags} -DDEBUG_LEVEL=0 -std=gnu++14 -DHAVE_SW_SERIAL -DSS_TIMER=4 -DSTM32_FLASH_SIZE=512
+build_unflags     = -std=gnu++11
+extra_scripts     = buildroot/share/PlatformIO/scripts/STM32F103RC_SKR_MINI.py
+src_filter        = ${common.default_src_filter} +<src/HAL/STM32F1>
+lib_deps          = ${common.lib_deps}
+  SoftwareSerialM=https://github.com/FYSETC/SoftwareSerialM/archive/master.zip
+  USBComposite for STM32F1@==0.91
+lib_ignore        = Adafruit NeoPixel, SPI
+monitor_speed     = 115200
+
+[env:STM32F103RC_btt_512K_USB]
+platform          = ststm32@<6.2.0
+board             = genericSTM32F103RC
+board_upload.maximum_size=524288
+platform_packages = tool-stm32duino
+build_flags       = !python Marlin/src/HAL/STM32F1/build_flags.py
+  ${common.build_flags} -DDEBUG_LEVEL=0 -std=gnu++14 -DHAVE_SW_SERIAL -DSS_TIMER=4 -DSTM32_FLASH_SIZE=512 -DUSE_USB_COMPOSITE
+build_unflags     = -std=gnu++11
+extra_scripts     = buildroot/share/PlatformIO/scripts/STM32F103RC_SKR_MINI.py
+src_filter        = ${common.default_src_filter} +<src/HAL/STM32F1>
+lib_deps          = ${common.lib_deps}
+  SoftwareSerialM=https://github.com/FYSETC/SoftwareSerialM/archive/master.zip
+  USBComposite for STM32F1@==0.91
+lib_ignore        = Adafruit NeoPixel, SPI
+monitor_speed     = 115200
+
+#
+# STM32F103RE
+#
+[env:STM32F103RE]
+platform          = ststm32@<6.2.0
+board             = genericSTM32F103RE
+platform_packages = tool-stm32duino
+build_flags       = !python Marlin/src/HAL/STM32F1/build_flags.py
+  ${common.build_flags} -std=gnu++14
+build_unflags     = -std=gnu++11
+src_filter        = ${common.default_src_filter} +<src/HAL/STM32F1>
+lib_deps          = ${common.lib_deps}
+  SoftwareSerialM=https://github.com/FYSETC/SoftwareSerialM/archive/master.zip
+lib_ignore        = Adafruit NeoPixel, SPI
+monitor_speed     = 115200
+
+#
+#   STM32F103RE_btt ............. RET6
+#   STM32F103RE_btt_USB ......... RET6 (USB mass storage)
+#
+[env:STM32F103RE_btt]
+platform          = ststm32@<6.2.0
+board             = genericSTM32F103RE
+platform_packages = tool-stm32duino
+build_flags       = !python Marlin/src/HAL/STM32F1/build_flags.py
+  ${common.build_flags} -DDEBUG_LEVEL=0 -std=gnu++14 -DHAVE_SW_SERIAL -DSS_TIMER=4
+build_unflags     = -std=gnu++11
+extra_scripts     = buildroot/share/PlatformIO/scripts/STM32F103RE_SKR_E3_DIP.py
+src_filter        = ${common.default_src_filter} +<src/HAL/STM32F1>
+lib_deps          = ${common.lib_deps}
+  SoftwareSerialM=https://github.com/FYSETC/SoftwareSerialM/archive/master.zip
+lib_ignore        = Adafruit NeoPixel, SPI
+debug_tool        = stlink
+upload_protocol   = stlink
+monitor_speed     = 115200
+
+[env:STM32F103RE_btt_USB]
+platform          = ststm32@<6.2.0
+board             = genericSTM32F103RE
+platform_packages = tool-stm32duino
+build_flags       = !python Marlin/src/HAL/STM32F1/build_flags.py
+  ${common.build_flags} -DDEBUG_LEVEL=0 -std=gnu++14 -DHAVE_SW_SERIAL -DSS_TIMER=4 -DUSE_USB_COMPOSITE
+build_unflags     = -std=gnu++11
+extra_scripts     = buildroot/share/PlatformIO/scripts/STM32F103RE_SKR_E3_DIP.py
+src_filter        = ${common.default_src_filter} +<src/HAL/STM32F1>
+lib_deps          = ${common.lib_deps}
+  SoftwareSerialM=https://github.com/FYSETC/SoftwareSerialM/archive/master.zip
+lib_ignore        = Adafruit NeoPixel, SPI
+debug_tool        = stlink
+upload_protocol   = stlink
+monitor_speed     = 115200
+
+#
+# STM32F4 with STM32GENERIC
+#
+[env:STM32F4]
+platform      = ststm32@<6.2.0
+board         = disco_f407vg
+build_flags   = ${common.build_flags} -DUSE_STM32GENERIC -DSTM32GENERIC -DSTM32F4 -DMENU_USB_SERIAL -DMENU_SERIAL=SerialUSB -DHAL_IWDG_MODULE_ENABLED
+lib_ignore    = Adafruit NeoPixel, TMCStepper
+src_filter    = ${common.default_src_filter} +<src/HAL/STM32_F4_F7> -<src/HAL/STM32_F4_F7/STM32F7>
+
+#
+# STM32F7 with STM32GENERIC
+#
+[env:STM32F7]
+platform      = ststm32@<6.2.0
+board         = remram_v1
+build_flags   = ${common.build_flags} -DUSE_STM32GENERIC -DSTM32GENERIC -DSTM32F7 -DMENU_USB_SERIAL -DMENU_SERIAL=SerialUSB -DHAL_IWDG_MODULE_ENABLED
+lib_ignore    = Adafruit NeoPixel, TMCStepper
+src_filter    = ${common.default_src_filter} +<src/HAL/STM32_F4_F7> -<src/HAL/STM32_F4_F7/STM32F4>
+
+#
+# ARMED (STM32)
+#
+[env:ARMED]
+platform      = ststm32@<6.2.0
+board         = armed_v1
+build_flags   = ${common.build_flags}
+  -DUSBCON -DUSBD_VID=0x0483 '-DUSB_MANUFACTURER="Unknown"' '-DUSB_PRODUCT="ARMED_V1"' -DUSBD_USE_CDC
+  -O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing -std=gnu11 -std=gnu++11
+  -IMarlin/src/HAL/STM32
+lib_ignore    = Adafruit NeoPixel, SoftwareSerial
+src_filter    = ${common.default_src_filter} +<src/HAL/STM32>
+
+#
+# Geeetech GTM32 (STM32F103VET6)
+#
+[env:STM32F103VE_GTM32]
+platform        = ststm32@<6.2.0
+board           = genericSTM32F103VE
+build_flags     = !python Marlin/src/HAL/STM32F1/build_flags.py
+  ${common.build_flags} -DDEBUG_LEVEL=DEBUG_NONE -std=gnu++14 -MMD -ffunction-sections -fdata-sections -nostdlib
+  -DBOARD_generic_stm32f103v -DARDUINO_GENERIC_STM32F103V -DARDUINO_ARCH_STM32F1
+  -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1 -DVECT_TAB_ADDR=0x8000000 -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6
+build_unflags = -std=gnu++11
+src_filter      = ${common.default_src_filter} +<src/HAL/STM32F1>
+lib_ignore      = Adafruit NeoPixel, SPI
+upload_protocol = serial
+
+#
+# Longer 3D board in Alfawise U20 (STM32F103VET6)
+#
+[env:STM32F103VE_longer]
+platform      = ststm32@<6.2.0
+board         = genericSTM32F103VE
+build_flags   = !python Marlin/src/HAL/STM32F1/build_flags.py
+  ${common.build_flags} -std=gnu++14 -USERIAL_USB
+  -DSTM32F1xx -DU20 -DTS_V12
+build_unflags = -std=gnu++11 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1 -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6
+extra_scripts = buildroot/share/PlatformIO/scripts/STM32F103VE_longer.py
+src_filter    = ${common.default_src_filter} +<src/HAL/STM32F1>
+lib_ignore    = Adafruit NeoPixel, LiquidTWI2, SPI
+
+#
+# MKS Robin Mini (STM32F103VET6)
+#
+[env:mks_robin_mini]
+platform      = ststm32@<6.2.0
+board         = genericSTM32F103VE
+build_flags   = !python Marlin/src/HAL/STM32F1/build_flags.py
+  ${common.build_flags} -std=gnu++14
+build_unflags = -std=gnu++11
+extra_scripts = buildroot/share/PlatformIO/scripts/mks_robin_mini.py
+src_filter    = ${common.default_src_filter} +<src/HAL/STM32F1>
+lib_ignore    = Adafruit NeoPixel, SPI
+
+#
+# MKS Robin Nano (STM32F103VET6)
+#
+[env:mks_robin_nano]
+platform      = ststm32@<6.2.0
+board         = genericSTM32F103VE
+platform_packages = tool-stm32duino
+build_flags   = !python Marlin/src/HAL/STM32F1/build_flags.py
+  ${common.build_flags} -std=gnu++14 -DHAVE_SW_SERIAL -DSS_TIMER=4
+build_unflags = -std=gnu++11
+extra_scripts = buildroot/share/PlatformIO/scripts/mks_robin_nano.py
+src_filter    = ${common.default_src_filter} +<src/HAL/STM32F1>
+lib_deps      = ${common.lib_deps}
+  SoftwareSerialM=https://github.com/FYSETC/SoftwareSerialM/archive/master.zip
+lib_ignore    = Adafruit NeoPixel, SPI
+
+#
+# MKS Robin (STM32F103ZET6)
+#
+[env:mks_robin]
+platform      = ststm32@<6.2.0
+board         = genericSTM32F103ZE
+build_flags   = !python Marlin/src/HAL/STM32F1/build_flags.py
+  ${common.build_flags} -std=gnu++14 -DHAVE_SW_SERIAL -DSS_TIMER=4 -DSTM32_XL_DENSITY
+build_unflags = -std=gnu++11
+extra_scripts = buildroot/share/PlatformIO/scripts/mks_robin.py
+src_filter    = ${common.default_src_filter} +<src/HAL/STM32F1>
+lib_deps      = ${common.lib_deps}
+  SoftwareSerialM=https://github.com/FYSETC/SoftwareSerialM/archive/master.zip
+lib_ignore    = Adafruit NeoPixel, SPI
+
+#
+# MKS Robin Pro (STM32F103ZET6)
+#
+[env:mks_robin_pro]
+platform      = ststm32@<6.2.0
+board         = genericSTM32F103ZE
+extra_scripts = buildroot/share/PlatformIO/scripts/mks_robin_pro.py
+build_flags   = !python Marlin/src/HAL/STM32F1/build_flags.py
+  ${common.build_flags} -std=gnu++14 -DSTM32_XL_DENSITY
+build_unflags = -std=gnu++11
+src_filter    = ${common.default_src_filter} +<src/HAL/STM32F1>
+lib_deps      = ${common.lib_deps}
+lib_ignore    = Adafruit NeoPixel, SPI, TMCStepper
+
+#
+# MKS Robin Lite/Lite2 (STM32F103RCT6)
+#
+[env:mks_robin_lite]
+platform      = ststm32@<6.2.0
+board         = genericSTM32F103RC
+build_flags   = !python Marlin/src/HAL/STM32F1/build_flags.py
+  ${common.build_flags} -std=gnu++14
+build_unflags = -std=gnu++11
+extra_scripts = buildroot/share/PlatformIO/scripts/mks_robin_lite.py
+src_filter    = ${common.default_src_filter} +<src/HAL/STM32F1>
+lib_ignore    = Adafruit NeoPixel, SPI
+
+#
+# MKS ROBIN LITE3 (STM32F103RCT6)
+#
+[env:mks_robin_lite3]
+platform      = ststm32@<6.2.0
+board         = genericSTM32F103RC
+extra_scripts = buildroot/share/PlatformIO/scripts/mks_robin_lite3.py
+build_flags   = !python Marlin/src/HAL/STM32F1/build_flags.py
+  ${common.build_flags} -std=gnu++14
+build_unflags = -std=gnu++11
+src_filter    = ${common.default_src_filter} +<src/HAL/STM32F1>
+lib_deps      = ${common.lib_deps}
+lib_ignore    = Adafruit NeoPixel, SPI
+
+#
+# JGAurora A5S A1 (STM32F103ZET6)
+#
+[env:jgaurora_a5s_a1]
+platform      = ststm32@<6.2.0
+board         = genericSTM32F103ZE
+build_flags   = !python Marlin/src/HAL/STM32F1/build_flags.py
+  ${common.build_flags} -DSTM32F1xx -std=gnu++14 -DSTM32_XL_DENSITY
+build_unflags = -std=gnu++11
+extra_scripts = buildroot/share/PlatformIO/scripts/jgaurora_a5s_a1_with_bootloader.py
+src_filter    = ${common.default_src_filter} +<src/HAL/STM32F1>
+lib_ignore    = Adafruit NeoPixel, SPI
+
+#
+# Malyan M200 (STM32F103CB)
+#
+[env:STM32F103CB_malyan]
+platform    = ststm32@<6.2.0
+board       = malyanM200
+build_flags = !python Marlin/src/HAL/STM32F1/build_flags.py -DMCU_STM32F103CB -D __STM32F1__=1 -std=c++1y -D MOTHERBOARD="BOARD_MALYAN_M200" -DSERIAL_USB -ffunction-sections -fdata-sections -Wl,--gc-sections
+  -DDEBUG_LEVEL=0 -D__MARLIN_FIRMWARE__
+src_filter  = ${common.default_src_filter} +<src/HAL/STM32F1>
+lib_ignore  = Adafruit NeoPixel, LiquidCrystal, LiquidTWI2, TMCStepper, U8glib-HAL, SPI
+
+#
+# Chitu boards like Tronxy X5s (STM32F103ZET6)
+#
+[env:chitu_f103]
+platform      = ststm32@<6.2.0
+board         = genericSTM32F103ZE
+build_flags   = !python Marlin/src/HAL/STM32F1/build_flags.py
+  ${common.build_flags} -DSTM32F1xx -std=gnu++14 -DSTM32_XL_DENSITY
+build_unflags = -std=gnu++11 -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG= -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6
+extra_scripts = buildroot/share/PlatformIO/scripts/chitu_crypt.py
+src_filter    = ${common.default_src_filter} +<src/HAL/STM32F1>
+lib_ignore    = Adafruit NeoPixel
+
+#
+# STM32F401VE
+# 'STEVAL-3DP001V1' STM32F401VE board - https://www.st.com/en/evaluation-tools/steval-3dp001v1.html
+#
+[env:STM32F401VE_STEVAL]
+platform          = ststm32@<6.2.0
+board             = STEVAL_STM32F401VE
+platform_packages = framework-arduinoststm32@>=3.107,<4
+build_flags       = ${common.build_flags}
+ -DTARGET_STM32F4 -DARDUINO_STEVAL -DSTM32F401xE
+ -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"STEVAL_F401VE\"
+ -DDISABLE_GENERIC_SERIALUSB
+ -IMarlin/src/HAL/STM32
+build_unflags     = -std=gnu++11
+extra_scripts     = pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
+  buildroot/share/PlatformIO/scripts/STEVAL__F401XX.py
+lib_ignore        = Adafruit NeoPixel, TMCStepper, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster, SoftwareSerial
+src_filter        = ${common.default_src_filter} +<src/HAL/STM32>
+
+#
+# FLYF407ZG
+#
+[env:FLYF407ZG]
+platform          = ststm32@<6.2.0
+board             = FLYF407ZG
+platform_packages = framework-arduinoststm32@>=3.107,<4
+build_flags       = ${common.build_flags}
+  -DSTM32F4 -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"STM32F407ZG\"
+  -DTARGET_STM32F4 -DVECT_TAB_OFFSET=0x8000
+  -IMarlin/src/HAL/STM32
+build_unflags     = -std=gnu++11
+extra_scripts     = pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
+lib_ignore        = Adafruit NeoPixel, TMCStepper, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster, SoftwareSerial
+src_filter        = ${common.default_src_filter} +<src/HAL/STM32>
+
+
+#
+# FYSETC S6 (STM32F446VET6 ARM Cortex-M4)
+#
+[env:FYSETC_S6]
+platform          = ststm32@<6.2.0
+board             = fysetc_s6
+platform_packages =
+   tool-stm32duino
+   framework-arduinoststm32@>=3.107,<4
+build_flags       = ${common.build_flags}
+  -DTARGET_STM32F4 -std=gnu++14
+  -DVECT_TAB_OFFSET=0x10000
+  -DUSBCON -DUSBD_USE_CDC -DHAL_PCD_MODULE_ENABLED -DUSBD_VID=0x0483 '-DUSB_PRODUCT="FYSETC_S6"'
+build_unflags     = -std=gnu++11
+extra_scripts     = pre:buildroot/share/PlatformIO/scripts/fysetc_STM32S6.py
+src_filter        = ${common.default_src_filter} +<src/HAL/STM32>
+lib_ignore        = Arduino-L6470
+debug_tool        = stlink
+#upload_protocol   = stlink
+upload_protocol   = serial
+
+#
+# STM32F407VET6 with RAMPS-like shield
+# 'Black' STM32F407VET6 board - http://wiki.stm32duino.com/index.php?title=STM32F407
+# Shield - https://github.com/jmz52/Hardware
+#
+[env:STM32F407VE_black]
+platform          = ststm32@<6.2.0
+board             = blackSTM32F407VET6
+platform_packages = framework-arduinoststm32@>=3.107,<4
+build_flags       = ${common.build_flags}
+ -DTARGET_STM32F4 -DARDUINO_BLACK_F407VE
+ -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"BLACK_F407VE\"
+  -IMarlin/src/HAL/STM32
+build_unflags     = -std=gnu++11
+extra_scripts     = pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
+lib_ignore        = Adafruit NeoPixel, TMCStepper, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster, SoftwareSerial
+src_filter        = ${common.default_src_filter} +<src/HAL/STM32>
+
+#
+# BigTreeTech SKR Pro (STM32F407ZGT6 ARM Cortex-M4)
+#
+[env:BIGTREE_SKR_PRO]
+platform          = ststm32@<6.2.0
+board             = BigTree_SKR_Pro
+platform_packages = framework-arduinoststm32@>=3.107,<4
+build_flags       = ${common.build_flags}
+  -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"STM32F407ZG\"
+  -DTARGET_STM32F4 -DSTM32F407_5ZX -DVECT_TAB_OFFSET=0x8000
+  -IMarlin/src/HAL/STM32
+build_unflags     = -std=gnu++11
+extra_scripts     = pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
+lib_ignore        = SoftwareSerial, SoftwareSerialM
+src_filter        = ${common.default_src_filter} +<src/HAL/STM32>
+#upload_protocol   = stlink
+#upload_command    = "$PROJECT_PACKAGES_DIR/tool-stm32duino/stlink/ST-LINK_CLI.exe" -c SWD -P "$BUILD_DIR/firmware.bin" 0x8008000 -Rst -Run
+debug_tool        = stlink
+debug_init_break  =
+
+#
+# Bigtreetech GTR V1.0 (STM32F407IGT6 ARM Cortex-M4)
+#
+[env:BIGTREE_GTR_V1_0]
+platform          = ststm32@>=5.7.0,<6.2.0
+framework         = arduino
+platform_packages = framework-arduinoststm32@>=3.107,<4
+board             = BigTree_SKR_Pro
+extra_scripts     = pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
+build_flags       = ${common.build_flags}
+  -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"STM32F407IG\"
+  -DTARGET_STM32F4 -DSTM32F407IX -DVECT_TAB_OFFSET=0x8000
+  -IMarlin/src/HAL/STM32
+lib_deps          =
+  U8glib-HAL@0.4.1
+  LiquidCrystal@1.5.0
+  TMCStepper@~0.7.1
+  Adafruit NeoPixel@1.5.0
+  LiquidTWI2@1.2.7
+  Arduino-L6470@0.8.0
+lib_ignore        = SoftwareSerial, SoftwareSerialM
+src_filter        = ${common.default_src_filter} +<src/HAL/STM32>
+monitor_speed     = 250000
+
+#
+# BigTreeTech BTT002 (STM32F407VET6 ARM Cortex-M4)
+#
+[env:BIGTREE_BTT002]
+platform          = ststm32@5.6.0
+board             = BigTree_Btt002
+platform_packages = framework-arduinoststm32@>=3.107,<4
+build_flags       = ${common.build_flags}
+  -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -DUSB_PRODUCT=\"STM32F407VE\"
+  -DTARGET_STM32F4 -DSTM32F407_5VX -DVECT_TAB_OFFSET=0x8000
+  -DHAVE_HWSERIAL2
+  -DHAVE_HWSERIAL3
+  -DPIN_SERIAL2_RX=PD_6
+  -DPIN_SERIAL2_TX=PD_5
+build_unflags     = -std=gnu++11
+extra_scripts     = pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
+lib_ignore        = Adafruit NeoPixel, SailfishLCD, SailfishRGB_LED, SlowSoftI2CMaster
+src_filter        = ${common.default_src_filter} +<src/HAL/STM32>
+
+#
+# Teensy 3.1 / 3.2 (ARM Cortex-M4)
+#
+[env:teensy31]
+platform      = teensy
+board         = teensy31
+lib_deps      = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+lib_ignore    = Adafruit NeoPixel
+src_filter    = ${common.default_src_filter} +<src/HAL/TEENSY31_32>
+
+#
+# Teensy 3.5 / 3.6 (ARM Cortex-M4)
+#
+[env:teensy35]
+platform      = teensy
+board         = teensy35
+lib_deps      = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+lib_ignore    = Adafruit NeoPixel
+src_filter    = ${common.default_src_filter} +<src/HAL/TEENSY35_36>
+
+#
+# Espressif ESP32
+#
+[env:esp32]
+platform      = espressif32@1.11.2
+board         = esp32dev
+build_flags   = ${common.build_flags} -DCORE_DEBUG_LEVEL=0
+lib_deps      = ${common.lib_deps}
+  AsyncTCP=https://github.com/me-no-dev/AsyncTCP/archive/master.zip
+  ESPAsyncWebServer=https://github.com/me-no-dev/ESPAsyncWebServer/archive/master.zip
+  ESP3DLib=https://github.com/luc-github/ESP3DLib.git
+  arduinoWebSockets=https://github.com/Links2004/arduinoWebSockets.git
+  ESP32SSDP=https://github.com/luc-github/ESP32SSDP.git
+lib_ignore    = LiquidCrystal, LiquidTWI2, SailfishLCD, SailfishRGB_LED, ESPAsyncTCP
+src_filter    = ${common.default_src_filter} +<src/HAL/ESP32>
+upload_speed  = 115200
+#upload_port   = marlinesp.local
+#board_build.flash_mode = qio
+
+#
+# Native
+# No supported Arduino libraries, base Marlin only
+#
+[env:linux_native]
+platform        = native
+framework       =
+build_flags     = -D__PLAT_LINUX__ -std=gnu++17 -ggdb -g -lrt -lpthread -D__MARLIN_FIRMWARE__ -Wno-expansion-to-defined
+src_build_flags = -Wall -IMarlin/src/HAL/LINUX/include
+build_unflags   = -Wall
+lib_ldf_mode    = off
+lib_deps        =
+src_filter      = ${common.default_src_filter} +<src/HAL/LINUX>
+
+#
+# Adafruit Grand Central M4 (Atmel SAMD51P20A ARM Cortex-M4)
+#
+[env:SAMD51_grandcentral_m4]
+platform       = atmelsam
+board          = adafruit_grandcentral_m4
+build_flags    = ${common.build_flags} -std=gnu++17 -Wno-register
+build_unflags  = -std=gnu++11
+src_filter     = ${common.default_src_filter} +<src/HAL/SAMD51>
+lib_deps       = ${common.lib_deps}
+  SoftwareSerialM=https://github.com/FYSETC/SoftwareSerialM/archive/master.zip
+  Adafruit_SPIFlash=https://github.com/adafruit/Adafruit_SPIFlash/archive/master.zip
+debug_tool     = jlink
+
+#
+# RUMBA32
+#
+[env:rumba32_f446ve]
+platform      = ststm32@<6.2.0
+board         = rumba32_f446ve
+build_flags   = ${common.build_flags}
+  -DSTM32F4xx
+  -DARDUINO_RUMBA32_F446VE
+  -DARDUINO_ARCH_STM32
+  "-DBOARD_NAME=\"RUMBA32_F446VE\""
+  -DSTM32F446xx
+  -DUSBCON
+  -DUSBD_VID=0x0483
+  "-DUSB_MANUFACTURER=\"Unknown\""
+  "-DUSB_PRODUCT=\"RUMBA32_F446VE\""
+  -DHAL_PCD_MODULE_ENABLED
+  -DUSBD_USE_CDC
+  -DDISABLE_GENERIC_SERIALUSB
+  -DHAL_UART_MODULE_ENABLED
+  -Os
+lib_ignore    = Adafruit NeoPixel
+src_filter    = ${common.default_src_filter} +<src/HAL/STM32>
+monitor_speed = 500000
+upload_protocol = dfu
+
+#
+# MKS RUMBA32 (adds TMC2208/2209 UART interface and AUX-1)
+#
+[env:rumba32_mks]
+platform      = ststm32@<6.2.0
+board         = rumba32_f446ve
+build_flags   = ${common.build_flags}
+ -DSTM32F4xx -DARDUINO_RUMBA32_F446VE -DARDUINO_ARCH_STM32 "-DBOARD_NAME=\"RUMBA32_F446VE\""
+ -DSTM32F446xx -DUSBCON -DUSBD_VID=0x8000
+  "-DUSB_MANUFACTURER=\"Unknown\""
+  "-DUSB_PRODUCT=\"RUMBA32_F446VE\""
+  -DHAL_PCD_MODULE_ENABLED
+  -DUSBD_USE_CDC
+  -DDISABLE_GENERIC_SERIALUSB
+  -DHAL_UART_MODULE_ENABLED
+  -Os
+lib_ignore    = Adafruit NeoPixel
+src_filter    = ${common.default_src_filter} +<src/HAL/STM32> +<src/HAL/STM32_F4_F7> -<src/HAL/STM32_F4_F7/STM32F7>
+upload_protocol = dfu
+
+#
+# Just print the dependency tree
+#
+[env:include_tree]
+platform    = atmelavr
+board       = megaatmega2560
+build_flags = -c -H -std=gnu++11 -Wall -Os -D__MARLIN_FIRMWARE__
+lib_deps    = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter  = +<src/Marlin.cpp>