Correctly measured Extruder Steps

Cleanup
Disable auto stepper deactivation because it causes problems with the mesh leveling
2021-06-25 12:09:04 +02:00 · 2021-06-25 09:19:15 +02:00 · 2021-06-25 08:39:44 +02:00 · 2021-06-24 22:39:06 +02:00 · 2021-06-24 10:53:17 +02:00 · 2021-06-24 10:35:21 +02:00
27 changed files with 3419 additions and 6739 deletions
--- a/.github/ISSUE_TEMPLATE/bug_report.md
+++ b/.github/ISSUE_TEMPLATE/bug_report.md
@@ -1,6 +1,6 @@
 ---
 name: Bug report
-about: Report a bug in Marlin
+about: Report a bug in Knutwurst's Marlin Firmware
 title: "[BUG] (short description)"
 labels: ''
 assignees: ''
@@ -9,11 +9,12 @@ assignees: ''

 <!--

-Have you read Marlin's Code of Conduct? By filing an Issue, you are expected to comply with it, including treating everyone with respect: https://github.com/MarlinFirmware/Marlin/blob/master/.github/code_of_conduct.md
+------ PLEASE USE THIS TEMPLATE! --------

-Do you want to ask a question? Are you looking for support? Please don't post here. Instead please use one of the support links at https://github.com/MarlinFirmware/Marlin/issues/new/choose
+Have you read all Wiki articles in cluding the FAQ?
+https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki

-Before filing an issue be sure to test the "bugfix" branches to see whether the issue has been resolved.
+Do you want to ask a question? Are you looking for support? Please don't post here. Instead please use one of the support links at https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/issues/new/choose

 -->

@@ -21,10 +22,6 @@ Before filing an issue be sure to test the "bugfix" branches to see whether the

 <!-- Description of the bug -->

-### My Configurations
-
-**Required:** Please include a ZIP file containing your `Configuration.h` and `Configuration_adv.h` files.
-
 ### Steps to Reproduce

 <!-- Please describe the steps needed to reproduce the issue -->
--- a/.github/ISSUE_TEMPLATE/config.yml
+++ b/.github/ISSUE_TEMPLATE/config.yml
@@ -1,17 +1,14 @@
 blank_issues_enabled: false
 contact_links:
-  - name: Marlin Documentation
-    url: http://marlinfw.org/
-    about: Lots of documentation on installing and using Marlin.
-  - name: MarlinFirmware Facebook group
-    url: https://www.facebook.com/groups/1049718498464482
-    about: Please ask and answer questions here.
-  - name: Marlin on Discord
-    url: https://discord.gg/n5NJ59y
-    about: Join the Discord server for support and discussion.
-  - name: Marlin Discussion Forum
-    url: http://forums.reprap.org/list.php?415
-    about: A searchable web forum hosted by RepRap dot org.
-  - name: Marlin Videos on YouTube
-    url: https://www.youtube.com/results?search_query=marlin+firmware
-    about: Tutorials and more from Marlin users all around the world. Great for new users!
+  - name: Knutwurst Wiki
+    url: https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki
+    about: Lots of documentation on installing and using Knutwurst Firmware.
+  - name: FAQ
+    url: https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/FAQ-(english)
+    about: Please look for your question here
+  - name: Official Facebook Group (german)
+    url: https://www.facebook.com/groups/3094090037303577
+    about: If you need general help (english/german), please ask your question here
+  - name: Knuwturst Videos on YouTube
+    url: https://www.youtube.com/results?search_query=knutwurst+firmware
+    about: Tutorials and more from Knutwurst users all around the world. Great for new users!
--- a/.github/ISSUE_TEMPLATE/feature_request.md
+++ b/.github/ISSUE_TEMPLATE/feature_request.md
@@ -9,14 +9,16 @@ assignees: ''

 <!--

-Have you read Marlin's Code of Conduct? By filing an Issue, you are expected to comply with it, including treating everyone with respect: https://github.com/MarlinFirmware/Marlin/blob/master/.github/code_of_conduct.md
+------ PLEASE USE THIS TEMPLATE! --------

-Do you want to ask a question? Are you looking for support? Please don't post here. Instead please use one of the support links at https://github.com/MarlinFirmware/Marlin/issues/new/choose
+Have you read all Wiki articles in cluding the FAQ?
+https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki

-Before filing an issue be sure to test the "bugfix" branches to see whether the issue has been resolved.
+Do you want to ask a question? Are you looking for support? Please don't post here. Instead please use one of the support links at https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/issues/new/choose

 -->

+
 ### Description

 <!-- Description of the requested feature -->
@@ -32,4 +34,3 @@ Before filing an issue be sure to test the "bugfix" branches to see whether the
 #### Additional Information

 * Provide pictures or links that demonstrate a similar feature or concept.
-* See [How Can I Contribute](#how-can-i-contribute) for additional guidelines.
--- a/.github/lock.yml
+++ b/.github/lock.yml
@@ -3,7 +3,7 @@
 #

 # Number of days of inactivity before a closed issue or pull request is locked
-daysUntilLock: 60
+daysUntilLock: 180

 # Skip issues and pull requests created before a given timestamp. Timestamp must
 # follow ISO 8601 (`YYYY-MM-DD`). Set to `false` to disable
--- a/.github/workflows/build-all.yml
+++ b/.github/workflows/build-all.yml
@@ -59,12 +59,22 @@ jobs:
         - MEGA_X_BLT_11
         - MEGA_X_TMC_BLT_10
         - MEGA_X_TMC_BLT_11
+         - MEGA_X_DGUS
+         - MEGA_X_DGUS_TMC
+         - MEGA_X_DGUS_BLT_10
+         - MEGA_X_DGUS_BLT_11
+         - MEGA_X_DGUS_TMC_BLT_10
+         - MEGA_X_DGUS_TMC_BLT_11
         - MEGA_P
         - MEGA_P_TMC
         - MEGA_P_BLT_10
         - MEGA_P_BLT_11
         - MEGA_P_TMC_BLT_10
         - MEGA_P_TMC_BLT_11
+         - CHIRON
+         - CHIRON_TMC
+         - CHIRON_DGUS
+         - CHIRON_DGUS_TMC

    steps:

@@ -88,15 +98,10 @@ jobs:

    - name: Compile Firmware with PlatformIO
      run: platformio run --environment ${{ matrix.platform }}
-    
-    - name: Set Environment Variables
-      run: |
-         CUSTOM_BUILD_VERSION=$(egrep -o "([0-9]{1,}\.)+[0-9]{1,}" Marlin/src/inc/Version.h -m2 | tail -n1) && \
-         echo "::set-env name=CUSTOM_BUILD_VER::$CUSTOM_BUILD_VERSION"

    - name: Rename Output Files
      run: |
-        CUSTOM_BUILD_VERSION=$(egrep -o "([0-9]{1,}\.)+[0-9]{1,}" Marlin/src/inc/Version.h -m2 | tail -n1) && \
+        CUSTOM_BUILD_VERSION=$(egrep -o "([0-9]{1,}\.)+[a-zA-Z0-9_.-]{1,}" Marlin/src/inc/Version.h -m2 | tail -n1) && \
        mv .pio/build/${{ matrix.platform }}/firmware.hex .pio/build/${{ matrix.platform }}/${{ matrix.platform }}_v$CUSTOM_BUILD_VERSION.hex

    #- name: Archive artifacts into single Files
@@ -109,6 +114,6 @@ jobs:
    - name: Archive all artifacts into one ZIP file
      uses: actions/upload-artifact@master
      with:
-        name: Knuwurst-all-in-one_v$CUSTOM_BUILD_VER
+        name: Knuwurst-all-in-one-${{github.sha}}
        path: |
         .pio/build/${{ matrix.platform }}/${{ matrix.platform }}_v*.hex
--- a/.github/workflows/bump-date.yml
+++ b/.github/workflows/bump-date.yml
@@ -1,31 +0,0 @@
-#
-# bump-date.yml
-# Bump the distribution date once per day
-#
-
-name: Bump Distribution Date
-
-on:
-  schedule:
-    - cron: '0 0 * * *'
-
-jobs:
-  bump_date:
-    name: Bump Distribution Date
-  
-    runs-on: ubuntu-latest
-
-    steps:
-
-    - uses: actions/checkout@master
-
-    - name: Bump Distribution Date
-      run: |
-        # Inline Bump Script
-        DIST=$( date +"%Y-%m-%d" )
-        eval "sed -E -i 's/(#define +STRING_DISTRIBUTION_DATE) .*$/\1 \"$DIST\"/g' Marlin/src/inc/Version.h" && \
-        git config user.name "${GITHUB_ACTOR}" && \
-        git config user.email "${GITHUB_ACTOR}@users.noreply.github.com" && \
-        git add . && \
-        git commit -m "[cron] Bump distribution date ($DIST)" && \
-        git push
--- a/.github/workflows/check-pr.yml
+++ b/.github/workflows/check-pr.yml
@@ -1,31 +0,0 @@
-#
-# check-pr.yml
-# Close PRs directed at release branches
-#
-
-name: PR Bad Target
-
-on:
-  pull_request:
-    branches:
-    - 2.0.x
-
-jobs:
-  bad_target:
-    name: PR Bad Target
-    if: github.repository == 'knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S'
-
-    runs-on: ubuntu-latest
-
-    steps:
-    - uses: peter-evans/close-pull@v1
-      with:
-        delete-branch: false
-        comment: >
-          Thanks for your contribution! Unfortunately we can't accept PRs directed at release branches. We make patches to the bugfix branches and only later do we push them out as releases.
-
-          Please redo this PR starting with the `bugfix-2.0.x` branch and be careful to target `bugfix-2.0.x` when resubmitting the PR.
-
-          It may help to set your fork's default branch to `bugfix-2.0.x`.
-
-          See [this page](http://marlinfw.org/docs/development/getting_started_pull_requests.html) for full instructions.
--- a/.github/workflows/nightly_cleanup.yml
+++ b/.github/workflows/nightly_cleanup.yml
@@ -0,0 +1,13 @@
+name: 'nightly artifacts cleanup'
+on:
+  schedule:
+    - cron: '0 1 * * *' # every night at 1 am UTC
+
+jobs:
+  delete-artifacts:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: kolpav/purge-artifacts-action@v1
+        with:
+          token: ${{ secrets.GITHUB_TOKEN }}
+          expire-in: 30days # Set this to 0 to delete all artifacts
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -38,137 +38,59 @@
 */
 #define CONFIGURATION_H_VERSION 020005

+
+/********************************************************************************************
+# **                                                                                       **
+# **   If you want to select a specific configuration for your                             **
+# **   printer, just open the PlatformIO tab on the left, select                           **
+# **   PROJECT TASKS and then "env:i3_MEGA*" (your desired config)                         **
+# **   From there you can build and upload your code.                                      **
+# **                                                                                       **
+# *******************************************************************************************/
+
+
+
 #define ANYCUBIC_TOUCHSCREEN
 #define ANYCUBIC_FILAMENT_RUNOUT_SENSOR
+#define KNUTWURST_SPECIAL_MENU
+#define KNUTWURST_SPECIAL_MENU_WO_SD
 //#define ANYCUBIC_TFT_DEBUG
 //#define POWER_OUTAGE_TEST

-/*******************************************************************************************
- **                                                                                       **
- **                                                                                       **
- **   WARNING:                                                                            **
- **   THE FOLLOWING SETTINGS ARE NORMALLY SET BY PLATFORMIO!                              **
- **                                                                                       **
- **   IF YOU CHANGE THEM WITHIN THE SOURCECODE, DO NOT COMMIT                             **
- **   TO MASTER BRANCH OR BUILD WITH PLATFORMIO ENVIRONMENT!                              **
- **   OTHERWISE SOME SETTINGS MIGHT BE OVERWRITTEN AND YOU END                            **
- **   UP WITH A NON FUNCTIONING FIRMWARE!                                                 **
- **                                                                                       **
- **   If you want to select a specific configuration for your                             **
- **   printer, just open the PlatformIO tab on the left, select                           **
- **   PROJECT TASKS and then "env:i3_MEGA*" (your desired config)                         **
- **   From there you can build and upload your code.                                      **
- **                                                                                       **
- **                                                                                       **
- *******************************************************************************************/
- 
-
-/*
- * Select your printer.
- * DO NOT ENABLE MORE THAN ONE LINE!
- * 
- * MEGA is the normal i3 Version without spool holder and the cassic extruder
- * MEGA_S is the S version with Titan clone extruder
- * MEGA_X is the big version with 310x310mm Bed
- * MEGA_P is the "Pro" Version with BMG Extruder, 2 TMC Steppers and Laser
- * 
- * PLEASE READ THE WARNING ABOVE!
- * 
- */
-//#define KNUTWURST_MEGA
-//#define KNUTWURST_MEGA_S
-//#define KNUTWURST_MEGA_X
-//#define KNUTWURST_MEGA_P
-
-/*
- * If you own the first generation i3 Mega
- * with only one Z endstop, you need to activate
- * KNUTWURST_MEGA and also this to disable
- * the left endstop and switch the Z Motors.
- * 
- * If the option is disabled, two Z endstops
- * are used by default.
- * 
- * PLEASE READ THE WARNING ABOVE!
- * 
- */
-//#define KNUTWURST_ONE_Z_ENDSTOP
-
-/*
- * If you have defined the MEGA_X or if
- * you have the "new" Mega S with the blue/yellow
- * Touchscreen display, you need to enable the
- * DGUS2 switch to get the special menu to work
- * 
- * PLEASE READ THE WARNING ABOVE!
- * 
- */
-//#define KNUTWURST_DGUS2_TFT
-
-/*
- * Enable Support for Trinamic Stepper drivers.
- * This also inverts the X,Y,Z and Extruder motor
- * outputs/directions.
- * 
- * PLEASE READ THE WARNING ABOVE!
- */
-//#define KNUTWURST_TMC
-
-/*
- * Invert E0 Stepper driver for
- * Bondtech Mini Geared (BMG) Extruders
- * 
- * This flag is mandatory if you own a
- * MEGA Pro, which has this Extruder by
- * default.
- * 
- */
-//#define KNUTWURST_BMG
-
-/*
- * This enables the BLTouch Support and also 
- * activates the BLTouch Menu item in the 
- * special menu. It also removes all manual 
- * leveling features because they are not 
- * neccessary at all.
- * 
- * PLEASE READ THE WARNING ABOVE!
- * 
- */
-//#define KNUTWURST_BLTOUCH
+#define EXT_LEVEL_HIGH 0.1

 /*
 * This feature is for debugging purpose only.
 * It enabled more console output and should be
 * disabled in production. It can cause the
 * printer to stutter.
- * 
- * PLEASE READ THE WARNING ABOVE!
- * 
 */
 //#define KNUTWURST_DEBUG


-/*******************************************************************************************
- **                                                                                       **
- **                                                                                       **
- **   WARNING:                                                                            **
- **   THE SETTINGS ABOVE ARE NORMALLY SET BY PLATFORMIO!                                  **
- **                                                                                       **
- **   IF YOU CHANGE THEM WITHIN THE SOURCECODE, DO NOT COMMIT                             **
- **   TO MASTER BRANCH OR BUILD WITH PLATFORMIO ENVIRONMENT!                              **
- **   OTHERWISE SOME SETTINGS MIGHT BE OVERWRITTEN AND YOU END                            **
- **   UP WITH A NON FUNCTIONING FIRMWARE!                                                 **
- **                                                                                       **
- **   If you want to select a specific configuration for your                             **
- **   printer, just open the PlatformIO tab on the left, select                           **
- **   PROJECT TASKS and then "env:i3_MEGA*" (your desired config)                         **
- **   From there you can build and upload your code.                                      **
- **                                                                                       **
- **                                                                                       **
- *******************************************************************************************/
+/*
+ * This enabled the integrated Laser engaving feature
+ * in the anycubic touchscreen. It's currently only
+ * supported by the Anycubic MEGA Pro and therefore it
+ * is automatically set if the MEGA_P is enabled.
+ * 
+ */
+#if ENABLED(KNUTWURST_MEGA_P)
+  //#define KNUTWURST_MEGA_P_LASER
+#endif


+/*
+ * This enabled the integrated leveling features
+ * in the anycubic touchscreen. It's currently only
+ * supported by the Anycubic Chiron and therefore it
+ * is automatically set if the chiron is enabled.
+ * 
+ */
+#if ENABLED(KNUTWURST_CHIRON)
+  #define KNUTWURST_TFT_LEVELING
+#endif
+
 /*
 * Here you can set the default preheat-Temperatures
 * which are set when you use the builtin preheat
@@ -276,9 +198,10 @@
 *
 * BOARD_TRIGORILLA_14     = Default Trigorilla
 * BOARD_TRIGORILLA_14_11  = Newer Trigorilla v1.1 (first seen late 2018)
+ * BOARD_TRIGORILLA_CHIRON = EFB Version for Anycubic Chiron
 *
- * The only major difference is a slight change on the servo pin mapping.
- * This setting only is relevant if you want to use BLtouch or similar
+ * The only major difference between 14 and 14_11 is a slight change on the servo
+ * pin mapping. This setting only is relevant if you want to use BLtouch or similar
 * mods to be used via servo pins.
 * The new version is to be identified by a "TRIGORILLA1.1" lettering
 * on the upper left of the PCB silkscreen.
@@ -593,20 +516,20 @@

 // Below this temperature the heater will be switched off
 // because it probably indicates a broken thermistor wire.
-#define HEATER_0_MINTEMP   5
-#define HEATER_1_MINTEMP   5
-#define HEATER_2_MINTEMP   5
-#define HEATER_3_MINTEMP   5
-#define HEATER_4_MINTEMP   5
-#define HEATER_5_MINTEMP   5
-#define HEATER_6_MINTEMP   5
-#define HEATER_7_MINTEMP   5
-#define BED_MINTEMP        5
+#define HEATER_0_MINTEMP   1
+#define HEATER_1_MINTEMP   1
+#define HEATER_2_MINTEMP   1
+#define HEATER_3_MINTEMP   1
+#define HEATER_4_MINTEMP   1
+#define HEATER_5_MINTEMP   1
+#define HEATER_6_MINTEMP   1
+#define HEATER_7_MINTEMP   1
+#define BED_MINTEMP        1

 // Above this temperature the heater will be switched off.
 // This can protect components from overheating, but NOT from shorts and failures.
 // (Use MINTEMP for thermistor short/failure protection.)
-#define HEATER_0_MAXTEMP 295
+#define HEATER_0_MAXTEMP 300
 #define HEATER_1_MAXTEMP 275
 #define HEATER_2_MAXTEMP 275
 #define HEATER_3_MAXTEMP 275
@@ -639,25 +562,23 @@

  // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it

-  // i3 Mega stock v5 hotend, 40W heater cartridge (3.6Ω @ 22°C)
-  #define  DEFAULT_Kp 15.94
-  #define  DEFAULT_Ki 1.17
-  #define  DEFAULT_Kd 54.19
+  #if ANY(KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_P)
+    #define  DEFAULT_Kp 15.94
+    #define  DEFAULT_Ki 1.17
+    #define  DEFAULT_Kd 54.19
+  #endif

-  // Ultimaker
-  // #define DEFAULT_Kp 22.2
-  // #define DEFAULT_Ki 1.08
-  // #define DEFAULT_Kd 114
+  #if ENABLED(KNUTWURST_MEGA_X)
+    #define  DEFAULT_Kp 15.94
+    #define  DEFAULT_Ki 1.17
+    #define  DEFAULT_Kd 54.19
+  #endif

-  // MakerGear
-  //#define DEFAULT_Kp 7.0
-  //#define DEFAULT_Ki 0.1
-  //#define DEFAULT_Kd 12
-
-  // Mendel Parts V9 on 12V
-  //#define DEFAULT_Kp 63.0
-  //#define DEFAULT_Ki 2.25
-  //#define DEFAULT_Kd 440
+  #if ENABLED(KNUTWURST_CHIRON)
+    #define DEFAULT_Kp 20
+    #define DEFAULT_Ki 0.5
+    #define DEFAULT_Kd 106.55
+  #endif

 #endif // PIDTEMP

@@ -694,10 +615,24 @@
  //#define MIN_BED_POWER 0
  //#define PID_BED_DEBUG // Sends debug data to the serial port.

-  //Anycubic i3 Mega Ultrabase (0.9Ω @ 22°C)
-  #define DEFAULT_bedKp 251.78
-  #define DEFAULT_bedKi 49.57
-  #define DEFAULT_bedKd 319.73
+  #if ANY(KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_P)
+    #define DEFAULT_bedKp 251.78
+    #define DEFAULT_bedKi 49.57
+    #define DEFAULT_bedKd 319.73
+  #endif
+
+  #if ENABLED(KNUTWURST_MEGA_X)
+    #define DEFAULT_bedKp 251.78
+    #define DEFAULT_bedKi 49.57
+    #define DEFAULT_bedKd 319.73
+  #endif
+
+  #if ENABLED(KNUTWURST_CHIRON)
+    #define DEFAULT_bedKp 97.10
+    #define DEFAULT_bedKi 1.41
+    #define DEFAULT_bedKd 1675.16
+  #endif
+

  //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
  //from pidautotune
@@ -779,6 +714,11 @@
 #if DISABLED(KNUTWURST_ONE_Z_ENDSTOP)
  #define USE_XMAX_PLUG
 #endif
+
+#if ENABLED(KNUTWURST_CHIRON)
+  //#define USE_ZMAX_PLUG
+#endif
+
 //#define USE_YMAX_PLUG
 //#define USE_ZMAX_PLUG

@@ -808,7 +748,7 @@
  //#define ENDSTOPPULLDOWN_ZMIN_PROBE
 #endif

-#if ENABLED(KNUTWURST_MEGA) || ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_P)
+#if ANY(KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_P)
    // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
    #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
    #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
@@ -830,6 +770,16 @@
    //#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
 #endif

+#if ENABLED(KNUTWURST_CHIRON)
+    // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
+    #define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
+    #define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
+    #define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+    #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+    #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+    #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+    #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#endif

 /**
 * Stepper Drivers
@@ -851,38 +801,19 @@
    #define X_DRIVER_TYPE  TMC2208_STANDALONE
    #define Y_DRIVER_TYPE  TMC2208_STANDALONE
    #define Z_DRIVER_TYPE  TMC2208_STANDALONE
-    //#define X2_DRIVER_TYPE TMC2208_STANDALONE
-    //#define Y2_DRIVER_TYPE TMC2208_STANDALONE
-    //#define Z2_DRIVER_TYPE TMC2208_STANDALONE
-    //#define Z3_DRIVER_TYPE TMC2208_STANDALONE
-    //#define Z4_DRIVER_TYPE TMC2208_STANDALONE
    #define E0_DRIVER_TYPE TMC2208_STANDALONE
    #define E1_DRIVER_TYPE TMC2208_STANDALONE
-    //#define E2_DRIVER_TYPE TMC2208_STANDALONE
-    //#define E3_DRIVER_TYPE TMC2208_STANDALONE
-    //#define E4_DRIVER_TYPE TMC2208_STANDALONE
-    //#define E5_DRIVER_TYPE TMC2208_STANDALONE
-    //#define E6_DRIVER_TYPE TMC2208_STANDALONE
-    //#define E7_DRIVER_TYPE TMC2208_STANDALONE
-#endif
-
-#if DISABLED(KNUTWURST_TMC)
-    #define X_DRIVER_TYPE  A4988
-    #define Y_DRIVER_TYPE  A4988
+#else
+    #if ENABLED(KNUTWURST_MEGA_P)
+        #define X_DRIVER_TYPE  TMC2208_STANDALONE
+        #define Y_DRIVER_TYPE  TMC2208_STANDALONE
+    #else
+        #define X_DRIVER_TYPE  A4988
+        #define Y_DRIVER_TYPE  A4988
+    #endif
    #define Z_DRIVER_TYPE  A4988
-    //#define X2_DRIVER_TYPE A4988
-    //#define Y2_DRIVER_TYPE A4988
-    //#define Z2_DRIVER_TYPE A4988
-    //#define Z3_DRIVER_TYPE A4988
-    //#define Z4_DRIVER_TYPE A4988
    #define E0_DRIVER_TYPE A4988
    #define E1_DRIVER_TYPE A4988
-    //#define E2_DRIVER_TYPE A4988
-    //#define E3_DRIVER_TYPE A4988
-    //#define E4_DRIVER_TYPE A4988
-    //#define E5_DRIVER_TYPE A4988
-    //#define E6_DRIVER_TYPE A4988
-    //#define E7_DRIVER_TYPE A4988
 #endif

 // Enable this feature if all enabled endstop pins are interrupt-capable.
@@ -933,7 +864,7 @@
 #endif

 #if ENABLED(KNUTWURST_MEGA_S)
-    #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 392 }
+    #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 393 }
 #endif

 #if ENABLED(KNUTWURST_MEGA_X)
@@ -944,6 +875,11 @@
    #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 415 }
 #endif

+#if ENABLED(KNUTWURST_CHIRON)
+    #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 100, 400, 415 }
+#endif
+
+

 /**
 * Default Max Feed Rate (mm/s)
@@ -952,22 +888,35 @@
 */
 #if ENABLED(KNUTWURST_MEGA)
    #if ENABLED(KNUTWURST_BMG)
-        #define DEFAULT_MAX_FEEDRATE          { 500, 500, 8, 30 }
+        #define DEFAULT_MAX_FEEDRATE          { 500, 500, 6, 30 }
    #else
-        #define DEFAULT_MAX_FEEDRATE          { 500, 500, 8, 60 }
+        #define DEFAULT_MAX_FEEDRATE          { 500, 500, 6, 60 }
    #endif 
 #endif

 #if ENABLED(KNUTWURST_MEGA_S)
-    #define DEFAULT_MAX_FEEDRATE          { 500, 500, 8, 30 }
+    #define DEFAULT_MAX_FEEDRATE          { 500, 500, 6, 30 } // same feedrate for BMG
 #endif

 #if ENABLED(KNUTWURST_MEGA_X)
-    #define DEFAULT_MAX_FEEDRATE            { 120, 120, 18, 80 } // thanks to Simon Geis
+    #if ENABLED(KNUTWURST_BMG)
+        #define DEFAULT_MAX_FEEDRATE            { 120, 120, 18, 30 } // correct for BMG?
+    #else
+        #define DEFAULT_MAX_FEEDRATE            { 120, 120, 18, 80 } // thanks to Simon Geis
+        //#define DEFAULT_MAX_FEEDRATE            { 400, 400, 18, 80 } // thanks to DanJunior78 
+    #endif 
 #endif

 #if ENABLED(KNUTWURST_MEGA_P)
-    #define DEFAULT_MAX_FEEDRATE          { 500, 500, 8, 30 }
+    #define DEFAULT_MAX_FEEDRATE          { 500, 500, 6, 30 }
+#endif
+
+#if ENABLED(KNUTWURST_CHIRON)
+    #if ENABLED(KNUTWURST_BMG)
+        #define DEFAULT_MAX_FEEDRATE          { 100, 100, 20, 30 }
+    #else
+        #define DEFAULT_MAX_FEEDRATE          { 100, 100, 20, 80 }
+    #endif
 #endif


@@ -982,15 +931,18 @@
 * Override with M201
 *                                      X, Y, Z, E0 [, E1[, E2...]]
 */
-#if ENABLED(KNUTWURST_MEGA) || ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_P)
+#if ANY(KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_P)
    #define DEFAULT_MAX_ACCELERATION      { 3000, 2000,  60, 10000 }
 #endif

 #if ENABLED(KNUTWURST_MEGA_X)
-    #define DEFAULT_MAX_ACCELERATION      { 400, 400, 60, 10000 }
+    #define DEFAULT_MAX_ACCELERATION      { 400, 400, 60, 10000 } //Original Values
+    //#define DEFAULT_MAX_ACCELERATION      { 2000, 1500, 60, 10000 } 
 #endif

-
+#if ENABLED(KNUTWURST_CHIRON)
+   #define DEFAULT_MAX_ACCELERATION      { 350, 350, 50, 20000 }
+#endif


 //#define LIMITED_MAX_ACCEL_EDITING     // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
@@ -1008,7 +960,7 @@
 */

 #if ENABLED(KNUTWURST_MEGA)
-    #define DEFAULT_ACCELERATION          1600    // X, Y, Z and E acceleration for printing moves
+    #define DEFAULT_ACCELERATION          1500    // X, Y, Z and E acceleration for printing moves
    #if ENABLED(KNUTWURST_BMG)
        #define DEFAULT_RETRACT_ACCELERATION  1500    // E acceleration for retracts
    #else
@@ -1019,7 +971,7 @@
 #endif

 #if ENABLED(KNUTWURST_MEGA_S)
-    #define DEFAULT_ACCELERATION          1600    // X, Y, Z and E acceleration for printing moves
+    #define DEFAULT_ACCELERATION          1500    // X, Y, Z and E acceleration for printing moves
    #define DEFAULT_RETRACT_ACCELERATION  1500    // E acceleration for retracts
    #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
 #endif
@@ -1031,11 +983,17 @@
 #endif

 #if ENABLED(KNUTWURST_MEGA_P)
-    #define DEFAULT_ACCELERATION          1600    // X, Y, Z and E acceleration for printing moves
+    #define DEFAULT_ACCELERATION          1500    // X, Y, Z and E acceleration for printing moves
    #define DEFAULT_RETRACT_ACCELERATION  1500    // E acceleration for retracts
    #define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
 #endif

+#if ENABLED(KNUTWURST_CHIRON)
+    #define DEFAULT_ACCELERATION          350    // X, Y, Z and E acceleration for printing moves
+    #define DEFAULT_RETRACT_ACCELERATION  2000//3000    // E acceleration for retracts
+    #define DEFAULT_TRAVEL_ACCELERATION   350    // X, Y, Z acceleration for travel (non printing) moves
+#endif
+
 /**
 * Default Jerk limits (mm/s)
 * Override with M205 X Y Z E
@@ -1044,32 +1002,29 @@
 * When changing speed and direction, if the difference is less than the
 * value set here, it may happen instantaneously.
 */
-//#define CLASSIC_JERK

-// I Know.. it's useless to put it here ;)
-#if ENABLED(KNUTWURST_MEGA) || ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_P)
-    //#define CLASSIC_JERK
-#endif
-
-#if ENABLED(KNUTWURST_MEGA_X)
-    //#define CLASSIC_JERK
+#if ANY(KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_P, KNUTWURST_MEGA_X, KNUTWURST_CHIRON)
+    #define CLASSIC_JERK
 #endif

 #if ENABLED(CLASSIC_JERK)
+  #if ANY(KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_P)
+      #define DEFAULT_XJERK  8.0
+      #define DEFAULT_YJERK  8.0
+      #define DEFAULT_ZJERK  0.4
+  #endif

-#if ENABLED(KNUTWURST_MEGA) || ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_P)
-    #define DEFAULT_XJERK  10.0
-    #define DEFAULT_YJERK  10.0
-    #define DEFAULT_ZJERK  0.4
-#endif
-
-#if ENABLED(KNUTWURST_MEGA_X)
-    #define DEFAULT_XJERK  4.0
-    #define DEFAULT_YJERK  4.0
-    #define DEFAULT_ZJERK  0.2
-#endif
-
+  #if ENABLED(KNUTWURST_MEGA_X)
+      #define DEFAULT_XJERK  4.0
+      #define DEFAULT_YJERK  4.0
+      #define DEFAULT_ZJERK  0.2
+  #endif

+  #if ENABLED(KNUTWURST_CHIRON)
+      #define DEFAULT_XJERK                 4
+      #define DEFAULT_YJERK                 4
+      #define DEFAULT_ZJERK                 0.4
+  #endif

  //#define TRAVEL_EXTRA_XYJERK 0.0     // Additional jerk allowance for all travel moves

@@ -1079,7 +1034,7 @@
  #endif
 #endif

-#if ENABLED(KNUTWURST_MEGA) || ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_P)
+#if ANY(KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_P)
    #define DEFAULT_EJERK    5.0  // May be used by Linear Advance
 #endif

@@ -1087,6 +1042,10 @@
    #define DEFAULT_EJERK    8.0  // May be used by Linear Advance
 #endif

+#if ENABLED(KNUTWURST_CHIRON)
+    #define DEFAULT_EJERK    15.0  // May be used by Linear Advance
+#endif
+
 /**
 * Junction Deviation Factor
 *
@@ -1095,12 +1054,16 @@
 *   http://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
 */
 #if DISABLED(CLASSIC_JERK)
-    #if ENABLED(KNUTWURST_MEGA) || ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_P)
+    #if ANY(KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_P)
        #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge
    #endif

    #if ENABLED(KNUTWURST_MEGA_X)
-        #define JUNCTION_DEVIATION_MM 0.16 // (mm) Distance from real junction edge
+        #define JUNCTION_DEVIATION_MM 0.016 // (mm) Distance from real junction edge
+    #endif
+
+    #if ENABLED(KNUTWURST_CHIRON)
+        #define JUNCTION_DEVIATION_MM 0.018 // (mm) Distance from real junction edge
    #endif
 #endif

@@ -1146,7 +1109,7 @@
 *      - normally-open switches to 5V and D32.
 *
 */
-#if ENABLED(KNUTWURST_BLTOUCH)
+#if ENABLED(KNUTWURST_BLTOUCH, KNUTWURST_CHIRON)
    #define Z_MIN_PROBE_PIN 2 // Pin 32 is the RAMPS default
 #endif

@@ -1162,8 +1125,8 @@
 * Use G29 repeatedly, adjusting the Z height at each point with movement commands
 * or (with LCD_BED_LEVELING) the LCD controller.
 */
-#if DISABLED(KNUTWURST_BLTOUCH)
-#define PROBE_MANUALLY
+#if NONE(KNUTWURST_BLTOUCH, KNUTWURST_TFT_LEVELING)
+  #define PROBE_MANUALLY
 #endif

 //#define MANUAL_PROBE_START_Z 0.2
@@ -1183,6 +1146,10 @@
 /**
 * Z Servo Probe, such as an endstop switch on a rotating arm.
 */
+#if ENABLED(KNUTWURST_TFT_LEVELING)
+    #define Z_PROBE_SERVO_NR 0
+    #define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
+#endif
 //#define Z_PROBE_SERVO_NR 0       // Defaults to SERVO 0 connector.
 //#define Z_SERVO_ANGLES { 70, 0 } // Z Servo Deploy and Stow angles

@@ -1268,19 +1235,30 @@
    //#define NOZZLE_TO_PROBE_OFFSET { 29, -15, 0 } //X-Carriage
 #endif

-#if DISABLED(KNUTWURST_BLTOUCH)
+#if ENABLED(KNUTWURST_TFT_LEVELING)
+    //#define NOZZLE_TO_PROBE_OFFSET { 0, 0, -17 } // Chiron Default Value!
+    #define NOZZLE_TO_PROBE_OFFSET { 0, 0, -16.8 }
+#endif
+
+#if NONE(KNUTWURST_BLTOUCH, KNUTWURST_TFT_LEVELING)
    #define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
 #endif

 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
-#define MIN_PROBE_EDGE 30
+
+
+#if ENABLED(KNUTWURST_CHIRON)
+    #define MIN_PROBE_EDGE 15
+#else
+    #define MIN_PROBE_EDGE 30
+#endif

 // X and Y axis travel speed (mm/m) between probes
 #define XY_PROBE_SPEED 8000

 // Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2)
-#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
+#define Z_PROBE_SPEED_FAST 600//HOMING_FEEDRATE_Z

 // Feedrate (mm/m) for the "accurate" probe of each point
 #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
@@ -1311,7 +1289,7 @@
 * Example: `M851 Z-5` with a CLEARANCE of 4  =>  9mm from bed to nozzle.
 *     But: `M851 Z+1` with a CLEARANCE of 2  =>  2mm from bed to nozzle.
 */
-#define Z_CLEARANCE_DEPLOY_PROBE   10 // Z Clearance for Deploy/Stow
+#define Z_CLEARANCE_DEPLOY_PROBE   20 // Z Clearance for Deploy/Stow
 #define Z_CLEARANCE_BETWEEN_PROBES  5 // Z Clearance between probe points
 #define Z_CLEARANCE_MULTI_PROBE     5 // Z Clearance between multiple probes
 //#define Z_AFTER_PROBING           5 // Z position after probing is done
@@ -1321,7 +1299,7 @@
 #endif

 #if DISABLED(KNUTWURST_BLTOUCH)
-    #define Z_PROBE_LOW_POINT          -2 // Farthest distance below the trigger-point to go before stopping
+    #define Z_PROBE_LOW_POINT          -12 // Farthest distance below the trigger-point to go before stopping
 #endif


@@ -1380,7 +1358,7 @@

 #if DISABLED(KNUTWURST_TMC)

-    #if ENABLED(KNUTWURST_MEGA) || ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_X)
+    #if ANY(KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_X)
        // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
        #define INVERT_X_DIR true // set to true for stock drivers or TMC2208 with reversed connectors
        #define INVERT_Y_DIR false // set to false for stock drivers or TMC2208 with reversed connectors
@@ -1411,13 +1389,36 @@

        // @section extruder

+        // For direct drive extruder v9 set to true, for geared extruder set to false.
+        #if ENABLED(KNUTWURST_BMG)
+            #define INVERT_E0_DIR false // set to false for stock drivers or TMC2208 with reversed connectors
+        #else
+            #define INVERT_E0_DIR true // set to false for stock drivers or TMC2208 with reversed connectors
+        #endif
+        #define INVERT_E1_DIR false // set to false for stock drivers or TMC2208 with reversed connectors
+        #define INVERT_E2_DIR false
+        #define INVERT_E3_DIR false
+        #define INVERT_E4_DIR false
+        #define INVERT_E5_DIR false
+        #define INVERT_E6_DIR false
+        #define INVERT_E7_DIR false
+    #endif
+
+    #if ENABLED(KNUTWURST_CHIRON)
+        // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
+        #define INVERT_X_DIR true // set to true for stock drivers or TMC2208 with reversed connectors
+        #define INVERT_Y_DIR true // set to false for stock drivers or TMC2208 with reversed connectors
+        #define INVERT_Z_DIR true // set to false for stock drivers or TMC2208 with reversed connectors
+
+        // @section extruder
+
        // For direct drive extruder v9 set to true, for geared extruder set to false.
        #if ENABLED(KNUTWURST_BMG)
            #define INVERT_E0_DIR true // set to false for stock drivers or TMC2208 with reversed connectors
        #else
            #define INVERT_E0_DIR false // set to false for stock drivers or TMC2208 with reversed connectors
        #endif
-        #define INVERT_E1_DIR false // set to false for stock drivers or TMC2208 with reversed connectors
+        #define INVERT_E1_DIR true // set to false for stock drivers or TMC2208 with reversed connectors
        #define INVERT_E2_DIR false
        #define INVERT_E3_DIR false
        #define INVERT_E4_DIR false
@@ -1428,7 +1429,7 @@
 #endif

 #if ENABLED(KNUTWURST_TMC)
-    #if ENABLED(KNUTWURST_MEGA) || ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_X)
+    #if ANY(KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_X)
        // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
        #define INVERT_X_DIR false // set to true for stock drivers or TMC2208 with reversed connectors
        #define INVERT_Y_DIR true // set to false for stock drivers or TMC2208 with reversed connectors
@@ -1458,13 +1459,36 @@

        // @section extruder

+        // For direct drive extruder v9 set to true, for geared extruder set to false.
+        #if ENABLED(KNUTWURST_BMG)
+            #define INVERT_E0_DIR true // set to false for stock drivers or TMC2208 with reversed connectors
+        #else
+            #define INVERT_E0_DIR false // set to false for stock drivers or TMC2208 with reversed connectors
+        #endif
+        #define INVERT_E1_DIR true // set to false for stock drivers or TMC2208 with reversed connectors
+        #define INVERT_E2_DIR false
+        #define INVERT_E3_DIR false
+        #define INVERT_E4_DIR false
+        #define INVERT_E5_DIR false
+        #define INVERT_E6_DIR false
+        #define INVERT_E7_DIR false
+    #endif
+
+    #if ENABLED(KNUTWURST_CHIRON)
+        // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
+        #define INVERT_X_DIR false // set to true for stock drivers or TMC2208 with reversed connectors
+        #define INVERT_Y_DIR false // set to false for stock drivers or TMC2208 with reversed connectors
+        #define INVERT_Z_DIR false // set to false for stock drivers or TMC2208 with reversed connectors
+
+        // @section extruder
+
        // For direct drive extruder v9 set to true, for geared extruder set to false.
        #if ENABLED(KNUTWURST_BMG)
            #define INVERT_E0_DIR false // set to false for stock drivers or TMC2208 with reversed connectors
        #else
            #define INVERT_E0_DIR true // set to false for stock drivers or TMC2208 with reversed connectors
        #endif
-        #define INVERT_E1_DIR true // set to false for stock drivers or TMC2208 with reversed connectors
+        #define INVERT_E1_DIR false // set to false for stock drivers or TMC2208 with reversed connectors
        #define INVERT_E2_DIR false
        #define INVERT_E3_DIR false
        #define INVERT_E4_DIR false
@@ -1494,25 +1518,58 @@
 // @section machine

 // The size of the print bed
-#if ENABLED(KNUTWURST_MEGA) || ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_P)
+/*
+#if ENABLED(KNUTWURST_MEGA)
+    #define X_BED_SIZE 215
+    #define Y_BED_SIZE 215
+    #define Z_BED_HEIGHT 206
+#endif
+*/
+
+#if ENABLED(KNUTWURST_MEGA)
+    #define X_MIN_POS 0
+    #define Y_MIN_POS 0
+    #define Z_MIN_POS 0
+    #define X_BED_SIZE 215
+    #define Y_BED_SIZE 215
+    #define Z_MAX_POS 206
+    #define X_MAX_POS X_BED_SIZE
+    #define Y_MAX_POS Y_BED_SIZE
+#endif
+
+#if ANY(KNUTWURST_MEGA_S, KNUTWURST_MEGA_P)
+    #define X_MIN_POS 0
+    #define Y_MIN_POS 0
+    #define Z_MIN_POS 0
    #define X_BED_SIZE 225
    #define Y_BED_SIZE 220
-    #define Z_BED_HEIGHT 210
+    #define Z_MAX_POS 210
+    #define X_MAX_POS X_BED_SIZE
+    #define Y_MAX_POS Y_BED_SIZE
 #endif

 #if ENABLED(KNUTWURST_MEGA_X)
+    #define X_MIN_POS 0
+    #define Y_MIN_POS 0
+    #define Z_MIN_POS 0
    #define X_BED_SIZE 310
    #define Y_BED_SIZE 310
-    #define Z_BED_HEIGHT 305
+    #define Z_MAX_POS 305
+    #define X_MAX_POS X_BED_SIZE
+    #define Y_MAX_POS Y_BED_SIZE
+#endif
+
+#if ENABLED(KNUTWURST_CHIRON)
+    #define X_MIN_POS -10
+    #define Y_MIN_POS 0
+    #define Z_MIN_POS 0
+    #define X_BED_SIZE 400
+    #define Y_BED_SIZE 400
+    #define Z_MAX_POS 455
+    #define X_MAX_POS X_BED_SIZE +10
+    #define Y_MAX_POS Y_BED_SIZE +10
 #endif

-// Travel limits (mm) after homing, corresponding to endstop positions.
-#define X_MIN_POS 0
-#define Y_MIN_POS 0
-#define Z_MIN_POS 0
-#define X_MAX_POS X_BED_SIZE
-#define Y_MAX_POS Y_BED_SIZE
-#define Z_MAX_POS Z_BED_HEIGHT

 /**
 * Software Endstops
@@ -1613,7 +1670,7 @@
 *   leveling in steps so you can manually adjust the Z height at each grid-point.
 *   With an LCD controller the process is guided step-by-step.
 */
-#if ENABLED(KNUTWURST_BLTOUCH)
+#if EITHER(KNUTWURST_BLTOUCH, KNUTWURST_TFT_LEVELING)
    //#define AUTO_BED_LEVELING_3POINT
    //#define AUTO_BED_LEVELING_LINEAR
    #define AUTO_BED_LEVELING_BILINEAR
@@ -1621,7 +1678,7 @@
    //#define MESH_BED_LEVELING
 #endif

-#if DISABLED(KNUTWURST_BLTOUCH)
+#if NONE(KNUTWURST_BLTOUCH, KNUTWURST_TFT_LEVELING)
    //#define AUTO_BED_LEVELING_3POINT
    //#define AUTO_BED_LEVELING_LINEAR
    //#define AUTO_BED_LEVELING_BILINEAR
@@ -1633,7 +1690,7 @@
 * Normally G28 leaves leveling disabled on completion. Enable
 * this option to have G28 restore the prior leveling state.
 */
-#define RESTORE_LEVELING_AFTER_G28
+#define RESTORE_LEVELING_AFTER_G28 // Disabled due to some bugs regarding BLTouch leveling

 /**
 * Enable detailed logging of G28, G29, M48, etc.
@@ -1641,7 +1698,7 @@
 * NOTE: Requires a lot of PROGMEM!
 */
 #if ENABLED(KNUTWURST_DEBUG)
-#define DEBUG_LEVELING_FEATURE
+   #define DEBUG_LEVELING_FEATURE
 #endif

 #if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
@@ -1680,6 +1737,7 @@
  // Probe along the Y axis, advancing X after each column
  //#define PROBE_Y_FIRST

+  
  #if ENABLED(AUTO_BED_LEVELING_BILINEAR)

    // Beyond the probed grid, continue the implied tilt?
@@ -1722,9 +1780,15 @@
  //=================================== Mesh ==================================
  //===========================================================================

-  #define MESH_INSET 10          // Set Mesh bounds as an inset region of the bed
-  #define GRID_MAX_POINTS_X 5    // Don't use more than 7 points per axis, implementation limited.
-  #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
+  #if ENABLED(KNUTWURST_CHIRON)
+      #define MESH_INSET 10          // Set Mesh bounds as an inset region of the bed
+      #define GRID_MAX_POINTS_X 3    // Don't use more than 7 points per axis, implementation limited.
+      #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
+  #else
+      #define MESH_INSET 10          // Set Mesh bounds as an inset region of the bed
+      #define GRID_MAX_POINTS_X 5    // Don't use more than 7 points per axis, implementation limited.
+      #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
+  #endif

  //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS

@@ -1786,10 +1850,10 @@
  #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2)    // Y point for Z homing when homing all axes (G28).
 #endif

-#if ENABLED(KNUTWURST_MEGA) || ENABLED(KNUTWURST_MEGA_S) || ENABLED(KNUTWURST_MEGA_P)
+#if ANY(KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_P)
    // Homing speeds (mm/m)
    #define HOMING_FEEDRATE_XY (50*60)
-    #define HOMING_FEEDRATE_Z  (5*60)
+    #define HOMING_FEEDRATE_Z  (4*60)
 #endif

 #if ENABLED(KNUTWURST_MEGA_X)
@@ -1798,6 +1862,12 @@
    #define HOMING_FEEDRATE_Z  (6*60)
 #endif

+#if ENABLED(KNUTWURST_CHIRON)
+    // Homing speeds (mm/m)
+    #define HOMING_FEEDRATE_XY (30*60)
+    #define HOMING_FEEDRATE_Z  (6*60)
+#endif
+

 // Validate that endstops are triggered on homing moves
 #define VALIDATE_HOMING_ENDSTOPS
@@ -2686,7 +2756,9 @@
 * Set this manually if there are extra servos needing manual control.
 * Leave undefined or set to 0 to entirely disable the servo subsystem.
 */
-//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command
+#if ENABLED(KNUTWURST_TFT_LEVELING)
+    #define NUM_SERVOS 1 // Servo index starts with 0 for M280 command
+#endif

 // (ms) Delay  before the next move will start, to give the servo time to reach its target angle.
 // 300ms is a good value but you can try less delay.
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -152,42 +152,61 @@
 * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD
 */
 #if ENABLED(THERMAL_PROTECTION_HOTENDS)
-  #define THERMAL_PROTECTION_PERIOD 3        // Seconds
-  #define THERMAL_PROTECTION_HYSTERESIS 15     // Degrees Celsius
+	#if ENABLED(KNUTWURST_CHIRON)
+	  #define THERMAL_PROTECTION_PERIOD     60     // Seconds
+	  #define THERMAL_PROTECTION_HYSTERESIS 20     // Degrees Celsius		
+	  
+	  #define WATCH_TEMP_PERIOD   60               // Seconds
+	  #define WATCH_TEMP_INCREASE 10               // Degrees Celsius
+	#else
+	  #define THERMAL_PROTECTION_PERIOD 10        // Seconds
+	  #define THERMAL_PROTECTION_HYSTERESIS 15     // Degrees Celsius

-  //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
-  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
-    //#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
-  #endif
+	  //#define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
+	  #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
+		//#define NO_FAN_SLOWING_IN_PID_TUNING    // Don't slow fan speed during M303
+	  #endif

-  /**
-   * Whenever an M104, M109, or M303 increases the target temperature, the
-   * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
-   * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and
-   * requires a hard reset. This test restarts with any M104/M109/M303, but only
-   * if the current temperature is far enough below the target for a reliable
-   * test.
-   *
-   * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD
-   * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set
-   * below 2.
-   */
-  #define WATCH_TEMP_PERIOD 35                // Seconds
-  #define WATCH_TEMP_INCREASE 5               // Degrees Celsius
+	  /**
+	   * Whenever an M104, M109, or M303 increases the target temperature, the
+	   * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
+	   * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and
+	   * requires a hard reset. This test restarts with any M104/M109/M303, but only
+	   * if the current temperature is far enough below the target for a reliable
+	   * test.
+	   *
+	   * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD
+	   * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set
+	   * below 2.
+	   */
+	  #define WATCH_TEMP_PERIOD 30                // Seconds
+	  #define WATCH_TEMP_INCREASE 3               // Degrees Celsius
+	#endif
 #endif

 /**
 * Thermal Protection parameters for the bed are just as above for hotends.
 */
 #if ENABLED(THERMAL_PROTECTION_BED)
-  #define THERMAL_PROTECTION_BED_PERIOD        20 // Seconds
-  #define THERMAL_PROTECTION_BED_HYSTERESIS     2 // Degrees Celsius
+	#if ENABLED(KNUTWURST_CHIRON)
+	  #define THERMAL_PROTECTION_BED_PERIOD         40 // Seconds
+	  #define THERMAL_PROTECTION_BED_HYSTERESIS     10 // Degrees Celsius

-  /**
-   * As described above, except for the bed (M140/M190/M303).
-   */
-  #define WATCH_BED_TEMP_PERIOD                60 // Seconds
-  #define WATCH_BED_TEMP_INCREASE               2 // Degrees Celsius
+	  /**
+	   * As described above, except for the bed (M140/M190/M303).
+	   */
+	  #define WATCH_BED_TEMP_PERIOD                120 // Seconds
+	  #define WATCH_BED_TEMP_INCREASE               10 // Degrees Celsius
+	#else
+	  #define THERMAL_PROTECTION_BED_PERIOD        20 // Seconds
+	  #define THERMAL_PROTECTION_BED_HYSTERESIS     2 // Degrees Celsius
+
+	  /**
+	   * As described above, except for the bed (M140/M190/M303).
+	   */
+	  #define WATCH_BED_TEMP_PERIOD                60 // Seconds
+	  #define WATCH_BED_TEMP_INCREASE               2 // Degrees Celsius
+	#endif
 #endif

 /**
@@ -306,7 +325,13 @@

 // The number of consecutive low temperature errors that can occur
 // before a min_temp_error is triggered. (Shouldn't be more than 10.)
-//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0
+
+
+#if ENABLED(KNUTWURST_CHIRON)
+	#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 3
+#else
+	//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0
+#endif

 // The number of milliseconds a hotend will preheat before starting to check
 // the temperature. This value should NOT be set to the time it takes the
@@ -341,7 +366,7 @@
 * Controller Fan
 * To cool down the stepper drivers and MOSFETs.
 *
- * The fan turns on automatically whenever any driver is enabled and turns
+ * The fan turns on automatically  whenever any driver is enabled and turns
 * off (or reduces to idle speed) shortly after drivers are turned off.
 *
 */
@@ -424,25 +449,13 @@
 * the fan will turn on when any selected extruder is above the threshold.
 */

-#if EITHER(KNUTWURST_MEGA, KNUTWURST_MEGA_S)
-    #define E0_AUTO_FAN_PIN FAN2_PIN
-    #define E1_AUTO_FAN_PIN -1
-    #define E2_AUTO_FAN_PIN -1
-    #define E3_AUTO_FAN_PIN -1
-    #define E4_AUTO_FAN_PIN -1
-    #define E5_AUTO_FAN_PIN -1
-    #define CHAMBER_AUTO_FAN_PIN -1
-#endif
-
-#if ENABLED(KNUTWURST_MEGAX)
-    #define E0_AUTO_FAN_PIN -1
-    #define E1_AUTO_FAN_PIN -1
-    #define E2_AUTO_FAN_PIN -1
-    #define E3_AUTO_FAN_PIN -1
-    #define E4_AUTO_FAN_PIN -1
-    #define E5_AUTO_FAN_PIN -1
-    #define CHAMBER_AUTO_FAN_PIN -1
-#endif
+#define E0_AUTO_FAN_PIN FAN2_PIN
+#define E1_AUTO_FAN_PIN -1
+#define E2_AUTO_FAN_PIN -1
+#define E3_AUTO_FAN_PIN -1
+#define E4_AUTO_FAN_PIN -1
+#define E5_AUTO_FAN_PIN -1
+#define CHAMBER_AUTO_FAN_PIN -1


 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50
@@ -541,7 +554,14 @@
    #define Z_MULTI_ENDSTOPS
  #endif
    #if ENABLED(Z_MULTI_ENDSTOPS)
-      #define Z2_USE_ENDSTOP          _XMAX_
+      #if ANY(KNUTWURST_MEGA, KNUTWURST_MEGA_S, KNUTWURST_MEGA_P, KNUTWURST_MEGA_X)
+          #define Z2_USE_ENDSTOP      _XMAX_
+      #endif
+      
+      #if ENABLED(KNUTWURST_CHIRON)
+          #define Z2_USE_ENDSTOP      _XMAX_
+      #endif
+
      #define Z2_ENDSTOP_ADJUSTMENT   0
      #if NUM_Z_STEPPER_DRIVERS >= 3
        #define Z3_USE_ENDSTOP        _YMAX_
@@ -615,8 +635,9 @@
 #define Z_HOME_BUMP_MM 2
 #define HOMING_BUMP_DIVISOR { 2, 2, 4 }  // Re-Bump Speed Divisor (Divides the Homing Feedrate)
 //#define QUICK_HOME                     // If homing includes X and Y, do a diagonal move initially
-//#define HOMING_BACKOFF_MM { 2, 2, 2 }  // (mm) Move away from the endstops after homing
-
+#if DISABLED(KNUTWURST_CHIRON)
+    #define HOMING_BACKOFF_MM { 2, 2, 0 }  // (mm) Move away from the endstops after homing
+#endif
 // When G28 is called, this option will make Y home before X
 //#define HOME_Y_BEFORE_X

@@ -683,7 +704,7 @@
   * This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
   * If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
   */
-  //#define BLTOUCH_HS_MODE
+  #define BLTOUCH_HS_MODE

  // Safety: Enable voltage mode settings in the LCD menu.
  //#define BLTOUCH_LCD_VOLTAGE_MENU
@@ -765,7 +786,7 @@
 // Default stepper release if idle. Set to 0 to deactivate.
 // Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true.
 // Time can be set by M18 and M84.
-#define DEFAULT_STEPPER_DEACTIVE_TIME 120
+#define DEFAULT_STEPPER_DEACTIVE_TIME 0
 #define DISABLE_INACTIVE_X true
 #define DISABLE_INACTIVE_Y true
 #define DISABLE_INACTIVE_Z true  // Set to false if the nozzle will fall down on your printed part when print has finished.
@@ -1487,9 +1508,7 @@
 *
 * Warning: Does not respect endstops!
 */
-#if ENABLED(KNUTWURST_BLTOUCH)
-    #define BABYSTEPPING
-#endif
+#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
  //#define INTEGRATED_BABYSTEPPING         // EXPERIMENTAL integration of babystepping into the Stepper ISR
  //#define BABYSTEP_WITHOUT_HOMING
@@ -1539,7 +1558,7 @@
 #define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
  //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants
-  #define LIN_ADVANCE_K 0	  // Unit: mm compression per 1mm/s extruder speed
+  #define LIN_ADVANCE_K 0.0	  // Unit: mm compression per 1mm/s extruder speed
  //#define LA_DEBUG          // If enabled, this will generate debug information output over USB.
 #endif

@@ -1576,29 +1595,20 @@
 * the probe to be unable to reach any points.
 */
 #if ENABLED(KNUTWURST_BLTOUCH)
-#if PROBE_SELECTED && !IS_KINEMATIC
-  #define MIN_PROBE_EDGE_LEFT 10
-  #define MIN_PROBE_EDGE_RIGHT 10
-  #define MIN_PROBE_EDGE_FRONT 10
-  #define MIN_PROBE_EDGE_BACK 10
-#endif
-#endif
-
-#if DISABLED(KNUTWURST_BLTOUCH)
-#if PROBE_SELECTED && !IS_KINEMATIC
-  //#define MIN_PROBE_EDGE_LEFT MIN_PROBE_EDGE
-  //#define MIN_PROBE_EDGE_RIGHT MIN_PROBE_EDGE
-  //#define MIN_PROBE_EDGE_FRONT MIN_PROBE_EDGE
-  //#define MIN_PROBE_EDGE_BACK MIN_PROBE_EDGE
-#endif
+  #if PROBE_SELECTED && !IS_KINEMATIC
+    #define MIN_PROBE_EDGE_LEFT 10
+    #define MIN_PROBE_EDGE_RIGHT 10
+    #define MIN_PROBE_EDGE_FRONT 10
+    #define MIN_PROBE_EDGE_BACK 10
+  #endif
 #endif

 #if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
  // Override the mesh area if the automatic (max) area is too large
-  //#define MESH_MIN_X MESH_INSET
-  //#define MESH_MIN_Y MESH_INSET
-  //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
-  //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
+  #define MESH_MIN_X MESH_INSET
+  #define MESH_MIN_Y MESH_INSET
+  #define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
+  #define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
 #endif

 /**
@@ -1661,15 +1671,15 @@
 //
 // G2/G3 Arc Support
 //
-//#define ARC_SUPPORT                 // Disable this feature to save ~3226 bytes
+#define ARC_SUPPORT                 // Disable this feature to save ~3226 bytes
 #if ENABLED(ARC_SUPPORT)
-  #define MM_PER_ARC_SEGMENT      1 // (mm) Length (or minimum length) of each arc segment
+  #define MM_PER_ARC_SEGMENT      1 // (mm) Length (or minimum length) of each arc segment (default: 1)
  //#define ARC_SEGMENTS_PER_R    1 // Max segment length, MM_PER = Min
-  #define MIN_ARC_SEGMENTS       24 // Minimum number of segments in a complete circle
+  #define MIN_ARC_SEGMENTS        24 // Minimum number of segments in a complete circle (default: 24)
  //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
  #define N_ARC_CORRECTION       25 // Number of interpolated segments between corrections
-  //#define ARC_P_CIRCLES           // Enable the 'P' parameter to specify complete circles
-  //#define CNC_WORKSPACE_PLANES    // Allow G2/G3 to operate in XY, ZX, or YZ planes
+  #define ARC_P_CIRCLES             // Enable the 'P' parameter to specify complete circles
+  #define CNC_WORKSPACE_PLANES      // Allow G2/G3 to operate in XY, ZX, or YZ planes
 #endif

 // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
@@ -1704,8 +1714,10 @@
 *
 * Override the default value based on the driver type set in Configuration.h.
 */
-//#define MINIMUM_STEPPER_POST_DIR_DELAY 650
-//#define MINIMUM_STEPPER_PRE_DIR_DELAY 650
+#if NONE(KNUTWURST_MEGA_P, KNUTWURST_TMC)
+  //#define MINIMUM_STEPPER_POST_DIR_DELAY 200
+  //#define MINIMUM_STEPPER_PRE_DIR_DELAY 200
+#endif

 /**
 * Minimum stepper driver pulse width (in µs)
@@ -1718,8 +1730,9 @@
 *
 * Override the default value based on the driver type set in Configuration.h.
 */
-//#define MINIMUM_STEPPER_PULSE 2
-
+#if NONE(KNUTWURST_MEGA_P, KNUTWURST_TMC)
+    //#define MINIMUM_STEPPER_PULSE 1
+#endif
 /**
 * Maximum stepping rate (in Hz) the stepper driver allows
 *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
@@ -1745,39 +1758,54 @@

 // @section hidden

-// The number of linear motions that can be in the plan at any give time.
-// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering.
-#if ENABLED(SDSUPPORT)
-  #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
+/*
+#if ENABLED(KNUTWURST_CHIRON)
+    #if ENABLED(SDSUPPORT)
+      #define BLOCK_BUFFER_SIZE 8 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
+    #else
+      #define BLOCK_BUFFER_SIZE 16 // maximize block buffer
+    #endif
+
+    #define MAX_CMD_SIZE 96
+    #define BUFSIZE 4
+    #define TX_BUFFER_SIZE 0
+    #define RX_BUFFER_SIZE 64
 #else
-  #define BLOCK_BUFFER_SIZE 16 // maximize block buffer
-#endif
+*/
+    // The number of linear motions that can be in the plan at any give time.
+    // THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering.
+    #if ENABLED(SDSUPPORT)
+      #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
+    #else
+      #define BLOCK_BUFFER_SIZE 16 // maximize block buffer
+    #endif

-// @section serial
+    // @section serial

-// The ASCII buffer for serial input
-#define MAX_CMD_SIZE 128
-#define BUFSIZE 8
+    // The ASCII buffer for serial input
+    #define MAX_CMD_SIZE 128
+    #define BUFSIZE 8

-// Transmission to Host Buffer Size
-// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
-// To buffer a simple "ok" you need 4 bytes.
-// For ADVANCED_OK (M105) you need 32 bytes.
-// For debug-echo: 128 bytes for the optimal speed.
-// Other output doesn't need to be that speedy.
-// :[0, 2, 4, 8, 16, 32, 64, 128, 256]
-#define TX_BUFFER_SIZE 4
+    // Transmission to Host Buffer Size
+    // To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
+    // To buffer a simple "ok" you need 4 bytes.
+    // For ADVANCED_OK (M105) you need 32 bytes.
+    // For debug-echo: 128 bytes for the optimal speed.
+    // Other output doesn't need to be that speedy.
+    // :[0, 2, 4, 8, 16, 32, 64, 128, 256]
+    #define TX_BUFFER_SIZE 0

-// Host Receive Buffer Size
-// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
-// To use flow control, set this buffer size to at least 1024 bytes.
-// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
-#define RX_BUFFER_SIZE 256
+    // Host Receive Buffer Size
+    // Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
+    // To use flow control, set this buffer size to at least 1024 bytes.
+    // :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
+    #define RX_BUFFER_SIZE 256
+//#endif

 #if RX_BUFFER_SIZE >= 1024
  // Enable to have the controller send XON/XOFF control characters to
  // the host to signal the RX buffer is becoming full.
-  //#define SERIAL_XON_XOFF
+  #define SERIAL_XON_XOFF
 #endif

 // Add M575 G-code to change the baud rate
--- a/Marlin/src/core/boards.h
+++ b/Marlin/src/core/boards.h
@@ -104,6 +104,7 @@
 #define BOARD_TANGO                   1148  // BIQU Tango V1
 #define BOARD_MKS_GEN_L_V2            1149  // MKS GEN L V2
 #define BOARD_COPYMASTER_3D           1150  // Copymaster 3D
+#define BOARD_TRIGORILLA_CHIRON       1151  // TriGorilla Anycubic version 1.4 based on RAMPS EFB for Chiron

 //
 // RAMBo and derivatives
--- a/Marlin/src/gcode/bedlevel/abl/G29.cpp
+++ b/Marlin/src/gcode/bedlevel/abl/G29.cpp
@@ -36,6 +36,10 @@
 #include "../../../module/probe.h"
 #include "../../queue.h"

+#if ENABLED(KNUTWURST_TFT_LEVELING)
+    #include "../../../lcd/HardwareSerial.h"
+#endif
+
 #if ENABLED(PROBE_TEMP_COMPENSATION)
  #include "../../../feature/probe_temp_comp.h"
  #include "../../../module/temperature.h"
@@ -811,6 +815,11 @@ G29_TYPE GcodeSuite::G29() {
      if (!dryrun) extrapolate_unprobed_bed_level();
      print_bilinear_leveling_grid();

+      #if ENABLED(KNUTWURST_TFT_LEVELING)
+          HARDWARE_SERIAL_PROTOCOLPGM("J25"); // Autoleveling done!
+          HARDWARE_SERIAL_ENTER();
+      #endif
+
      refresh_bed_level();

      #if ENABLED(ABL_BILINEAR_SUBDIVISION)
--- a/Marlin/src/gcode/motion/G2_G3.cpp
+++ b/Marlin/src/gcode/motion/G2_G3.cpp
@@ -216,7 +216,7 @@ void plan_arc(
      planner.apply_leveling(raw);
    #endif

-    if (!planner.buffer_line(raw, scaled_fr_mm_s, active_extruder, seg_length
+    if (!planner.buffer_line(raw, scaled_fr_mm_s, active_extruder, 0 /* seg_length */
      #if ENABLED(SCARA_FEEDRATE_SCALING)
        , inv_duration
      #endif
--- a/Marlin/src/inc/Version.h
+++ b/Marlin/src/inc/Version.h
@@ -25,7 +25,7 @@
 * Release version. Leave the Marlin version or apply a custom scheme.
 */
 #ifndef SHORT_BUILD_VERSION
-  #define SHORT_BUILD_VERSION "2.0.5.4"
+  #define SHORT_BUILD_VERSION "2.0.x"
 #endif

 /**
@@ -41,10 +41,10 @@
 * here we define this default string as the date where the latest release
 * version was tagged.
 */
- #define CUSTOM_BUILD_VERSION "1.1.6"
+ #define CUSTOM_BUILD_VERSION "1.2.0"

 #ifndef STRING_DISTRIBUTION_DATE
-  #define STRING_DISTRIBUTION_DATE "2020-09-11"
+  #define STRING_DISTRIBUTION_DATE "2021-06-24"
 #endif

 /**
@@ -75,7 +75,7 @@
 * Define a generic printer name to be output to the LCD after booting Marlin.
 */
 #ifndef MACHINE_NAME
-  #define MACHINE_NAME "Knutwurst's Anycubic i3 MEGA"
+  #define MACHINE_NAME "Knutwurst's Anycubic Printer"
 #endif

 /**
--- a/Marlin/src/lcd/anycubic_touchscreen.cpp
+++ b/Marlin/src/lcd/anycubic_touchscreen.cpp
--- a/Marlin/src/lcd/anycubic_touchscreen.h
+++ b/Marlin/src/lcd/anycubic_touchscreen.h
@@ -21,8 +21,20 @@
 #ifndef anycubic_touchscreen_h
 #define anycubic_touchscreen_h

-#include <stdio.h>
-#include "../inc/MarlinConfig.h"
+//#include <stdio.h>
+//#include "../inc/MarlinConfig.h"
+//#include "../module/configuration_store.h"
+
+#include "./src/inc/MarlinConfigPre.h"
+#include "./src/feature/bedlevel/bedlevel.h"
+#include "./src/feature/bedlevel/abl/abl.h"
+#include "src/module/probe.h"
+
+
+enum axis_t     : uint8_t { X, Y, Z, X2, Y2, Z2, Z3, Z4 };
+enum extruder_t : uint8_t { E0, E1, E2, E3, E4, E5, E6, E7 };
+void setAxisPosition_mm(const float, const axis_t, const feedRate_t=0);
+void initializeGrid();

 char *itostr2(const uint8_t &x);

@@ -36,7 +48,11 @@ char *ftostr32(const float &);
 #define MSG_MY_VERSION CUSTOM_BUILD_VERSION
 #define MAX_PRINTABLE_FILENAME_LEN 30

-#define FILAMENT_RUNOUT_PIN 19
+#if ENABLED(KNUTWURST_CHIRON)
+  #define FILAMENT_RUNOUT_PIN 33
+#else
+  #define FILAMENT_RUNOUT_PIN 19
+#endif

 #define ANYCUBIC_TFT_STATE_IDLE 0
 #define ANYCUBIC_TFT_STATE_SDPRINT 1
@@ -79,8 +95,10 @@ char *ftostr32(const float &);
 #define SM_Z_UP_001_S         "<ZUP001>"
 #define SM_Z_DN_001_L         "<Z Down 0.01>"
 #define SM_Z_DN_001_S         "<ZDN001>"
-#define SM_BLTOUCH_L          "<BLTouch Leveling>"
+#define SM_BLTOUCH_L          "<Start Auto Leveling>"
 #define SM_BLTOUCH_S          "<BLTCH>"
+#define SM_RESETLV_L          "<Reset Level Grid>"
+#define SM_RESETLV_S          "<RSTLV>"
 #define SM_PAUSE_L            "<Fil. Change Pause>"
 #define SM_PAUSE_S            "<PAUSE>"
 #define SM_RESUME_L           "<Fil. Change Resume>"
@@ -105,6 +123,20 @@ char *ftostr32(const float &);
 #define SM_FLOW_DN_S          "<DOWN>"
 #define SM_FLOW_EXIT_L        "<End Flow Settings>"
 #define SM_FLOW_EXIT_S        "<EXTFLW>"
+
+#define SM_EZLVL_MENU_L       "<Easy 4 Point Level>"
+#define SM_EZLVL_MENU_S       "<EZLVLM>"
+#define SM_EZLVL_P1_L         "<Point A>"
+#define SM_EZLVL_P1_S         "<EZLPA>"
+#define SM_EZLVL_P2_L         "<Point B>"
+#define SM_EZLVL_P2_S         "<EZLPB>"
+#define SM_EZLVL_P3_L         "<Point C>"
+#define SM_EZLVL_P3_S         "<EZLPC>"
+#define SM_EZLVL_P4_L         "<Point D>"
+#define SM_EZLVL_P4_S         "<EZLPD>"
+#define SM_EZLVL_EXIT_L       "<End Easy Leveling>"
+#define SM_EZLVL_EXIT_S       "<EZLEXT>"
+
 #endif

 #if ENABLED(KNUTWURST_DGUS2_TFT)
@@ -140,8 +172,10 @@ char *ftostr32(const float &);
 #define SM_Z_UP_001_S         "<ZUP00~2.GCO"
 #define SM_Z_DN_001_L         "<Z Down 0.01>       .gcode"
 #define SM_Z_DN_001_S         "<ZDOWN~3.GCO"
-#define SM_BLTOUCH_L          "<BLTouch Leveling>  .gcode"
+#define SM_BLTOUCH_L          "<Start AutoLeveling>.gcode"
 #define SM_BLTOUCH_S          "<BLTOU~1.GCO"
+#define SM_RESETLV_L          "<Reset Level Grid>  .gcode"
+#define SM_RESETLV_S          "<RSTLV~1.GCO>"
 #define SM_PAUSE_L            "<Fil. Change Pause> .gcode"
 #define SM_PAUSE_S            "<FILCH~2.GCO"
 #define SM_RESUME_L           "<Fil. Change Resume>.gcode"
@@ -166,8 +200,28 @@ char *ftostr32(const float &);
 #define SM_FLOW_DN_S          "<DWNFLOW.GCO"
 #define SM_FLOW_EXIT_L        "<End Flow Settings> .gcode"
 #define SM_FLOW_EXIT_S        "<EXTFLW1.GCO"
+
+#define SM_EZLVL_MENU_L       "<Easy 4 Point Level>.gcode"
+#define SM_EZLVL_MENU_S       "<EZLVLM1.GCO"
+#define SM_EZLVL_P1_L         "<Point A>           .gcode"
+#define SM_EZLVL_P1_S         "<EZLPA01.GCO"
+#define SM_EZLVL_P2_L         "<Point B>           .gcode"
+#define SM_EZLVL_P2_S         "<EZLPB01.GCO"
+#define SM_EZLVL_P3_L         "<Point C>           .gcode"
+#define SM_EZLVL_P3_S         "<EZLPC01.GCO"
+#define SM_EZLVL_P4_L         "<Point D>           .gcode"
+#define SM_EZLVL_P4_S         "<EZLPD01.GCO"
+#define SM_EZLVL_EXIT_L       "<End Easy Leveling> .gcode"
+#define SM_EZLVL_EXIT_S       "<EZLEXT1.GCO"
 #endif

+#if ENABLED(KNUTWURST_TFT_LEVELING)
+  // eeprom_index
+  extern int z_values_index;
+  extern int z_values_size;
+  // temp value which needs to be saved
+  extern float SAVE_zprobe_zoffset;
+#endif

 class AnycubicTouchscreenClass
 {
@@ -225,7 +279,7 @@ private:
  } OutageData;
 #endif

-
+  int CodeValueInt();
  float CodeValue();
  bool CodeSeen(char);
  void PrintList();
@@ -244,18 +298,79 @@ private:

  char currentTouchscreenSelection[64];
  char currentFileOrDirectory[64];
+  String flowRateBuffer;
  uint16_t MyFileNrCnt = 0;
  uint8_t FilamentSensorEnabled = true;

  uint8_t SpecialMenu = false;
  uint8_t MMLMenu = false;
-  uint8_t FlowMenu = false;  
+  uint8_t FlowMenu = false;
+  uint8_t LevelMenu = false;  

 #if ENABLED(ANYCUBIC_FILAMENT_RUNOUT_SENSOR)
  char FilamentTestStatus = false;
  char FilamentTestLastStatus = false;
  bool FilamentSetMillis = true;
+  int FilamentRunoutCounter = 0;
 #endif
+
+
+#if ENABLED(KNUTWURST_MEGA_P_LASER)
+
+typedef struct { 
+    unsigned char       bfType[2]; 
+    unsigned char       bfSize[4]; 
+    unsigned char       bfReserved1[2]; 
+    unsigned char       bfReserved2[2]; 
+    unsigned char       bfOffBits[4];
+    unsigned char       biSize[4]; 
+    unsigned char       biWidth[4]; 
+    unsigned char       biHeight[4]; 
+    unsigned char       biPlanes[2]; 
+    unsigned char       biBitCount[2]; 
+    unsigned char      biCompression[4]; 
+    unsigned char      biSizeImage[4]; 
+    unsigned char      biXPelsPerMeter[4]; 
+    unsigned char      biYPelsPerMeter[4]; 
+    unsigned char      biClrUsed[4]; 
+    unsigned char      biClrImportant[4]; 
+}BMP_HEAD;
+
+
+typedef struct 
+{
+    unsigned long pic_file_size;
+    unsigned long pic_ptr;
+    unsigned long pic_start;
+
+    float pic_pixel_distance;
+    float laser_height;
+    float x_offset;
+    float y_offset;
+
+    unsigned int  pic_realy_widht;
+    unsigned int  pic_widht;
+    unsigned int  pic_hight;
+    unsigned char pic_bit;
+    unsigned char pic_widht_odd; 
+    unsigned char pic_hight_odd; 
+
+    unsigned char pic_print_status;
+    unsigned char pic_dir;
+
+    unsigned char pic_vector;
+    unsigned char pic_x_mirror;
+    unsigned char pic_y_mirror;
+    unsigned char pic_laser_time;
+}PRINTER_STRUCT;
+
+#define PIC_FIXED 0.1f //  //  POINT/MM
+#define PIC_OPEN  50 //  //  ms
+#define PIC_SPEDD 20000
+#define MIN_GRAY_VLAUE  20
+#define LASER_PRINT_SPEED 30  //50*60
+#endif
+
 };

 extern AnycubicTouchscreenClass AnycubicTouchscreen;
--- a/Marlin/src/module/configuration_store.cpp
+++ b/Marlin/src/module/configuration_store.cpp
@@ -51,6 +51,7 @@
 #include "stepper.h"
 #include "temperature.h"
 #include "../lcd/ultralcd.h"
+#include "../lcd/anycubic_touchscreen.h"
 #include "../core/language.h"
 #include "../libs/vector_3.h"   // for matrix_3x3
 #include "../gcode/gcode.h"
@@ -1562,6 +1563,12 @@ void MarlinSettings::postprocess() {
            if (!validating) set_bed_leveling_enabled(false);
            EEPROM_READ(bilinear_grid_spacing);        // 2 ints
            EEPROM_READ(bilinear_start);               // 2 ints
+
+            #if ENABLED(KNUTWURST_TFT_LEVELING)
+              z_values_index = eeprom_index;
+              z_values_size = sizeof(z_values);
+            #endif
+
            EEPROM_READ(z_values);                     // 9 to 256 floats
          }
          else // EEPROM data is stale
--- a/Marlin/src/pins/pins.h
+++ b/Marlin/src/pins/pins.h
@@ -190,6 +190,8 @@
  #include "ramps/pins_MKS_GEN_L_V2.h"          // ATmega2560                             env:mega2560
 #elif MB(COPYMASTER_3D)
  #include "ramps/pins_COPYMASTER_3D.h"         // ATmega2560                             env:mega2560
+#elif MB(TRIGORILLA_CHIRON)
+  #include "ramps/pins_TRIGORILLA_CHIRON.h"     // ATmega2560                             env:mega2560

 //
 // RAMBo and derivatives
--- a/Marlin/src/pins/ramps/pins_RAMPS_CHIRON.h
+++ b/Marlin/src/pins/ramps/pins_RAMPS_CHIRON.h
@@ -0,0 +1,723 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Arduino Mega with RAMPS v1.4 (or v1.3) pin assignments
+ *
+ * Applies to the following boards:
+ *
+ *  RAMPS_14_EFB (Hotend, Fan, Bed)
+ *  RAMPS_14_EEB (Hotend0, Hotend1, Bed)
+ *  RAMPS_14_EFF (Hotend, Fan0, Fan1)
+ *  RAMPS_14_EEF (Hotend0, Hotend1, Fan)
+ *  RAMPS_14_SF  (Spindle, Controller Fan)
+ *
+ *  RAMPS_13_EFB (Hotend, Fan, Bed)
+ *  RAMPS_13_EEB (Hotend0, Hotend1, Bed)
+ *  RAMPS_13_EFF (Hotend, Fan0, Fan1)
+ *  RAMPS_13_EEF (Hotend0, Hotend1, Fan)
+ *  RAMPS_13_SF  (Spindle, Controller Fan)
+ *
+ *  Other pins_MYBOARD.h files may override these defaults
+ *
+ *  Differences between
+ *  RAMPS_13 | RAMPS_14
+ *         7 | 11
+ */
+
+#ifdef TARGET_LPC1768
+  #error "Oops! Set MOTHERBOARD to an LPC1768-based board when building for LPC1768."
+#elif defined(__STM32F1__)
+  #error "Oops! Set MOTHERBOARD to an STM32F1-based board when building for STM32F1."
+#endif
+
+#if NONE(IS_RAMPS_SMART, IS_RAMPS_DUO, IS_RAMPS4DUE, TARGET_LPC1768)
+  #if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
+    #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
+  #endif
+#endif
+
+#ifndef BOARD_INFO_NAME
+  #define BOARD_INFO_NAME "RAMPS 1.4"
+#endif
+
+//
+// Servos
+//
+#ifndef SERVO0_PIN
+  #ifdef IS_RAMPS_13
+    #define SERVO0_PIN                         7
+  #else
+    #define SERVO0_PIN                        11
+  #endif
+#endif
+#ifndef SERVO1_PIN
+  #define SERVO1_PIN                           6
+#endif
+#ifndef SERVO2_PIN
+  #define SERVO2_PIN                           5
+#endif
+#ifndef SERVO3_PIN
+  #define SERVO3_PIN                           4
+#endif
+
+//
+// Limit Switches
+//
+#ifndef X_STOP_PIN
+  #ifndef X_MIN_PIN
+    #define X_MIN_PIN                          3
+  #endif
+  #ifndef X_MAX_PIN
+    #define X_MAX_PIN                         43
+  #endif
+#endif
+#ifndef Y_STOP_PIN
+  #ifndef Y_MIN_PIN
+    #define Y_MIN_PIN                         42
+  #endif
+  #ifndef Y_MAX_PIN
+    #define Y_MAX_PIN                         -1
+  #endif
+#endif
+#ifndef Z_STOP_PIN
+  #ifndef Z_MIN_PIN
+    #define Z_MIN_PIN                         18
+  #endif
+  #ifndef Z_MAX_PIN
+    #define Z_MAX_PIN                         43
+  #endif
+#endif
+
+//
+// Z Probe (when not Z_MIN_PIN)
+//
+#ifndef Z_MIN_PROBE_PIN
+  #define Z_MIN_PROBE_PIN                      2
+#endif
+
+//
+// Steppers
+//
+#define X_STEP_PIN                            54
+#define X_DIR_PIN                             55
+#define X_ENABLE_PIN                          38
+#ifndef X_CS_PIN
+  #define X_CS_PIN                            53
+#endif
+
+#define Y_STEP_PIN                            60
+#define Y_DIR_PIN                             61
+#define Y_ENABLE_PIN                          56
+#ifndef Y_CS_PIN
+  #define Y_CS_PIN                            49
+#endif
+
+#ifndef Z_STEP_PIN
+  #define Z_STEP_PIN                          46
+#endif
+#define Z_DIR_PIN                             48
+#define Z_ENABLE_PIN                          62
+#ifndef Z_CS_PIN
+  #define Z_CS_PIN                            40
+#endif
+
+#define E0_STEP_PIN                           26
+#define E0_DIR_PIN                            28
+#define E0_ENABLE_PIN                         24
+#ifndef E0_CS_PIN
+  #define E0_CS_PIN                           42
+#endif
+
+#define E1_STEP_PIN                           36
+#define E1_DIR_PIN                            34
+#define E1_ENABLE_PIN                         30
+#ifndef E1_CS_PIN
+  #define E1_CS_PIN                           44
+#endif
+
+//
+// Temperature Sensors
+//
+#ifndef TEMP_0_PIN
+  #define TEMP_0_PIN                          13  // Analog Input
+#endif
+#ifndef TEMP_1_PIN
+  #define TEMP_1_PIN                          15  // Analog Input
+#endif
+#ifndef TEMP_BED_PIN
+  #define TEMP_BED_PIN                        14  // Analog Input
+#endif
+
+//
+// SPI for Max6675 or Max31855 Thermocouple
+//
+#ifndef MAX6675_SS_PIN
+  #define MAX6675_SS_PIN                      66  // Don't use 53 if using Display/SD card (SDSS) or 49 (SD_DETECT_PIN)
+#endif
+
+//
+// Augmentation for auto-assigning RAMPS plugs
+//
+#if NONE(IS_RAMPS_EEB, IS_RAMPS_EEF, IS_RAMPS_EFB, IS_RAMPS_EFF, IS_RAMPS_SF) && !PIN_EXISTS(MOSFET_D)
+  #if HOTENDS > 1
+    #if TEMP_SENSOR_BED
+      #define IS_RAMPS_EEB
+    #else
+      #define IS_RAMPS_EEF
+    #endif
+  #elif TEMP_SENSOR_BED
+    #define IS_RAMPS_EFB
+  #else
+    #define IS_RAMPS_EFF
+  #endif
+#endif
+
+//
+// Heaters / Fans
+//
+#ifndef MOSFET_D_PIN
+  #define MOSFET_D_PIN                        -1
+#endif
+#ifndef RAMPS_D8_PIN
+  #define RAMPS_D8_PIN                         8
+#endif
+#ifndef RAMPS_D9_PIN
+  #define RAMPS_D9_PIN                         9
+#endif
+#ifndef RAMPS_D10_PIN
+  #define RAMPS_D10_PIN                       10
+#endif
+
+#define HEATER_0_PIN               RAMPS_D10_PIN
+
+#if ENABLED(IS_RAMPS_EFB)                         // Hotend, Fan, Bed
+  #define HEATER_BED_PIN            45 //RAMPS_D8_PIN
+#elif ENABLED(IS_RAMPS_EEF)                       // Hotend, Hotend, Fan
+  #define HEATER_1_PIN              RAMPS_D9_PIN
+#elif ENABLED(IS_RAMPS_EEB)                       // Hotend, Hotend, Bed
+  #define HEATER_1_PIN              RAMPS_D9_PIN
+  #define HEATER_BED_PIN            RAMPS_D8_PIN
+#elif ENABLED(IS_RAMPS_EFF)                       // Hotend, Fan, Fan
+  #define FAN1_PIN                  RAMPS_D8_PIN
+#elif DISABLED(IS_RAMPS_SF)                       // Not Spindle, Fan (i.e., "EFBF" or "EFBE")
+  #define HEATER_BED_PIN            RAMPS_D8_PIN
+  #if HOTENDS == 1
+    #define FAN1_PIN                MOSFET_D_PIN
+  #else
+    #define HEATER_1_PIN            MOSFET_D_PIN
+  #endif
+#endif
+
+#ifndef FAN_PIN
+  #if EITHER(IS_RAMPS_EFB, IS_RAMPS_EFF)          // Hotend, Fan, Bed or Hotend, Fan, Fan
+    #define FAN_PIN                 RAMPS_D9_PIN
+  #elif EITHER(IS_RAMPS_EEF, IS_RAMPS_SF)         // Hotend, Hotend, Fan or Spindle, Fan
+    #define FAN_PIN                 RAMPS_D8_PIN
+  #elif ENABLED(IS_RAMPS_EEB)                     // Hotend, Hotend, Bed
+    #define FAN_PIN                            4  // IO pin. Buffer needed
+  #else                                           // Non-specific are "EFB" (i.e., "EFBF" or "EFBE")
+    #define FAN_PIN                 RAMPS_D9_PIN
+  #endif
+#endif
+
+//
+// Misc. Functions
+//
+#define SDSS                                  53
+#define LED_PIN                               13
+
+#ifndef FILWIDTH_PIN
+  #define FILWIDTH_PIN                         5  // Analog Input on AUX2
+#endif
+
+// RAMPS 1.4 DIO 4 on the servos connector
+#ifndef FIL_RUNOUT_PIN
+  #define FIL_RUNOUT_PIN                       4
+#endif
+
+#ifndef PS_ON_PIN
+  #define PS_ON_PIN                           12
+#endif
+
+#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN)
+  #if NUM_SERVOS <= 1                             // Prefer the servo connector
+    #define CASE_LIGHT_PIN                     6  // Hardware PWM
+  #elif HAS_FREE_AUX2_PINS
+    #define CASE_LIGHT_PIN                    44  // Hardware PWM
+  #endif
+#endif
+
+//
+// M3/M4/M5 - Spindle/Laser Control
+//
+#if HAS_CUTTER && !defined(SPINDLE_LASER_ENA_PIN)
+  #if !NUM_SERVOS                                 // Use servo connector if possible
+    #define SPINDLE_LASER_ENA_PIN              4  // Pullup or pulldown!
+    #define SPINDLE_LASER_PWM_PIN              6  // Hardware PWM
+    #define SPINDLE_DIR_PIN                    5
+  #elif HAS_FREE_AUX2_PINS
+    #define SPINDLE_LASER_ENA_PIN             40  // Pullup or pulldown!
+    #define SPINDLE_LASER_PWM_PIN             44  // Hardware PWM
+    #define SPINDLE_DIR_PIN                   65
+  #else
+    #error "No auto-assignable Spindle/Laser pins available."
+  #endif
+#endif
+
+//
+// TMC software SPI
+//
+#if ENABLED(TMC_USE_SW_SPI)
+  #ifndef TMC_SW_MOSI
+    #define TMC_SW_MOSI                       66
+  #endif
+  #ifndef TMC_SW_MISO
+    #define TMC_SW_MISO                       44
+  #endif
+  #ifndef TMC_SW_SCK
+    #define TMC_SW_SCK                        64
+  #endif
+#endif
+
+#if HAS_TMC_UART
+  /**
+   * TMC2208/TMC2209 stepper drivers
+   *
+   * Hardware serial communication ports.
+   * If undefined software serial is used according to the pins below
+   */
+  //#define X_HARDWARE_SERIAL Serial1
+  //#define X2_HARDWARE_SERIAL Serial1
+  //#define Y_HARDWARE_SERIAL Serial1
+  //#define Y2_HARDWARE_SERIAL Serial1
+  //#define Z_HARDWARE_SERIAL Serial1
+  //#define Z2_HARDWARE_SERIAL Serial1
+  //#define E0_HARDWARE_SERIAL Serial1
+  //#define E1_HARDWARE_SERIAL Serial1
+  //#define E2_HARDWARE_SERIAL Serial1
+  //#define E3_HARDWARE_SERIAL Serial1
+  //#define E4_HARDWARE_SERIAL Serial1
+
+  //
+  // Software serial
+  //
+
+  #ifndef X_SERIAL_TX_PIN
+    #define X_SERIAL_TX_PIN                   40
+  #endif
+  #ifndef X_SERIAL_RX_PIN
+    #define X_SERIAL_RX_PIN                   63
+  #endif
+  #ifndef X2_SERIAL_TX_PIN
+    #define X2_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef X2_SERIAL_RX_PIN
+    #define X2_SERIAL_RX_PIN                  -1
+  #endif
+
+  #ifndef Y_SERIAL_TX_PIN
+    #define Y_SERIAL_TX_PIN                   59
+  #endif
+  #ifndef Y_SERIAL_RX_PIN
+    #define Y_SERIAL_RX_PIN                   64
+  #endif
+  #ifndef Y2_SERIAL_TX_PIN
+    #define Y2_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef Y2_SERIAL_RX_PIN
+    #define Y2_SERIAL_RX_PIN                  -1
+  #endif
+
+  #ifndef Z_SERIAL_TX_PIN
+    #define Z_SERIAL_TX_PIN                   42
+  #endif
+  #ifndef Z_SERIAL_RX_PIN
+    #define Z_SERIAL_RX_PIN                   65
+  #endif
+  #ifndef Z2_SERIAL_TX_PIN
+    #define Z2_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef Z2_SERIAL_RX_PIN
+    #define Z2_SERIAL_RX_PIN                  -1
+  #endif
+
+  #ifndef E0_SERIAL_TX_PIN
+    #define E0_SERIAL_TX_PIN                  44
+  #endif
+  #ifndef E0_SERIAL_RX_PIN
+    #define E0_SERIAL_RX_PIN                  66
+  #endif
+  #ifndef E1_SERIAL_TX_PIN
+    #define E1_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef E1_SERIAL_RX_PIN
+    #define E1_SERIAL_RX_PIN                  -1
+  #endif
+  #ifndef E2_SERIAL_TX_PIN
+    #define E2_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef E2_SERIAL_RX_PIN
+    #define E2_SERIAL_RX_PIN                  -1
+  #endif
+  #ifndef E3_SERIAL_TX_PIN
+    #define E3_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef E3_SERIAL_RX_PIN
+    #define E3_SERIAL_RX_PIN                  -1
+  #endif
+  #ifndef E4_SERIAL_TX_PIN
+    #define E4_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef E4_SERIAL_RX_PIN
+    #define E4_SERIAL_RX_PIN                  -1
+  #endif
+  #ifndef E5_SERIAL_TX_PIN
+    #define E5_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef E5_SERIAL_RX_PIN
+    #define E5_SERIAL_RX_PIN                  -1
+  #endif
+  #ifndef E6_SERIAL_TX_PIN
+    #define E6_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef E6_SERIAL_RX_PIN
+    #define E6_SERIAL_RX_PIN                  -1
+  #endif
+  #ifndef E7_SERIAL_TX_PIN
+    #define E7_SERIAL_TX_PIN                  -1
+  #endif
+  #ifndef E7_SERIAL_RX_PIN
+    #define E7_SERIAL_RX_PIN                  -1
+  #endif
+#endif
+
+//
+// Průša i3 MK2 Multiplexer Support
+//
+#ifndef E_MUX0_PIN
+  #define E_MUX0_PIN                          40  // Z_CS_PIN
+#endif
+#ifndef E_MUX1_PIN
+  #define E_MUX1_PIN                          42  // E0_CS_PIN
+#endif
+#ifndef E_MUX2_PIN
+  #define E_MUX2_PIN                          44  // E1_CS_PIN
+#endif
+
+//////////////////////////
+// LCDs and Controllers //
+//////////////////////////
+
+#if HAS_SPI_LCD
+
+  //
+  // LCD Display output pins
+  //
+  #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
+
+    #define LCD_PINS_RS                       49  // CS chip select /SS chip slave select
+    #define LCD_PINS_ENABLE                   51  // SID (MOSI)
+    #define LCD_PINS_D4                       52  // SCK (CLK) clock
+
+  #elif BOTH(NEWPANEL, PANEL_ONE)
+
+    #define LCD_PINS_RS                       40
+    #define LCD_PINS_ENABLE                   42
+    #define LCD_PINS_D4                       65
+    #define LCD_PINS_D5                       66
+    #define LCD_PINS_D6                       44
+    #define LCD_PINS_D7                       64
+
+  #else
+
+    #if ENABLED(CR10_STOCKDISPLAY)
+
+      #define LCD_PINS_RS                     27
+      #define LCD_PINS_ENABLE                 29
+      #define LCD_PINS_D4                     25
+
+      #if DISABLED(NEWPANEL)
+        #define BEEPER_PIN                    37
+      #endif
+
+    #elif ENABLED(ZONESTAR_LCD)
+
+      #define LCD_PINS_RS                     64
+      #define LCD_PINS_ENABLE                 44
+      #define LCD_PINS_D4                     63
+      #define LCD_PINS_D5                     40
+      #define LCD_PINS_D6                     42
+      #define LCD_PINS_D7                     65
+
+    #else
+
+      #if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306)
+        #define LCD_PINS_DC                   25  // Set as output on init
+        #define LCD_PINS_RS                   27  // Pull low for 1s to init
+        // DOGM SPI LCD Support
+        #define DOGLCD_CS                     16
+        #define DOGLCD_MOSI                   17
+        #define DOGLCD_SCK                    23
+        #define DOGLCD_A0            LCD_PINS_DC
+      #else
+        #define LCD_PINS_RS                   16
+        #define LCD_PINS_ENABLE               17
+        #define LCD_PINS_D4                   23
+        #define LCD_PINS_D5                   25
+        #define LCD_PINS_D6                   27
+      #endif
+
+      #define LCD_PINS_D7                     29
+
+      #if DISABLED(NEWPANEL)
+        #define BEEPER_PIN                    33
+      #endif
+
+    #endif
+
+    #if DISABLED(NEWPANEL)
+      // Buttons attached to a shift register
+      // Not wired yet
+      //#define SHIFT_CLK                     38
+      //#define SHIFT_LD                      42
+      //#define SHIFT_OUT                     40
+      //#define SHIFT_EN                      17
+    #endif
+
+  #endif
+
+  //
+  // LCD Display input pins
+  //
+  #if ENABLED(NEWPANEL)
+
+    #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
+
+      #define BEEPER_PIN                      37
+
+      #if ENABLED(CR10_STOCKDISPLAY)
+        #define BTN_EN1                       17
+        #define BTN_EN2                       23
+      #else
+        #define BTN_EN1                       31
+        #define BTN_EN2                       33
+      #endif
+
+      #define BTN_ENC                         35
+      #ifndef SD_DETECT_PIN
+        #define SD_DETECT_PIN                 49
+      #endif
+      #ifndef KILL_PIN
+        #define KILL_PIN                      41
+      #endif
+
+      #if ENABLED(BQ_LCD_SMART_CONTROLLER)
+        #define LCD_BACKLIGHT_PIN             39
+      #endif
+
+    #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
+
+      #define BTN_EN1                         64
+      #define BTN_EN2                         59
+      #define BTN_ENC                         63
+      #define SD_DETECT_PIN                   42
+
+    #elif ENABLED(LCD_I2C_PANELOLU2)
+
+      #define BTN_EN1                         47
+      #define BTN_EN2                         43
+      #define BTN_ENC                         32
+      #define LCD_SDSS                      SDSS
+      #define KILL_PIN                        41
+
+    #elif ENABLED(LCD_I2C_VIKI)
+
+      #define BTN_EN1                         40  // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
+      #define BTN_EN2                         42
+      #define BTN_ENC                         -1
+
+      #define LCD_SDSS                      SDSS
+      #define SD_DETECT_PIN                   49
+
+    #elif ANY(VIKI2, miniVIKI)
+
+      #define DOGLCD_CS                       45
+      #define DOGLCD_A0                       44
+      #define LCD_SCREEN_ROT_180
+
+      #define BEEPER_PIN                      33
+      #define STAT_LED_RED_PIN                32
+      #define STAT_LED_BLUE_PIN               35
+
+      #define BTN_EN1                         22
+      #define BTN_EN2                          7
+      #define BTN_ENC                         39
+
+      #define SD_DETECT_PIN                   -1  // Pin 49 for display SD interface, 72 for easy adapter board
+      #define KILL_PIN                        31
+
+    #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
+
+      #define DOGLCD_CS                       29
+      #define DOGLCD_A0                       27
+
+      #define BEEPER_PIN                      23
+      #define LCD_BACKLIGHT_PIN               33
+
+      #define BTN_EN1                         35
+      #define BTN_EN2                         37
+      #define BTN_ENC                         31
+
+      #define LCD_SDSS                      SDSS
+      #define SD_DETECT_PIN                   49
+      #define KILL_PIN                        41
+
+    #elif EITHER(MKS_MINI_12864, FYSETC_MINI_12864)
+
+      #define BEEPER_PIN                      37
+      #define BTN_ENC                         35
+      #define SD_DETECT_PIN                   49
+
+      #ifndef KILL_PIN
+        #define KILL_PIN                      41
+      #endif
+
+      #if ENABLED(MKS_MINI_12864)                 // Added in Marlin 1.1.6
+
+        #define DOGLCD_A0                     27
+        #define DOGLCD_CS                     25
+
+        // GLCD features
+        // Uncomment screen orientation
+        //#define LCD_SCREEN_ROT_90
+        //#define LCD_SCREEN_ROT_180
+        //#define LCD_SCREEN_ROT_270
+
+        // not connected to a pin
+        #define LCD_BACKLIGHT_PIN             -1  // 65 (MKS mini12864 can't adjust backlight by software!)
+
+        #define BTN_EN1                       31
+        #define BTN_EN2                       33
+
+      #elif ENABLED(FYSETC_MINI_12864)
+
+        // From https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8
+
+        #define DOGLCD_A0                     16
+        #define DOGLCD_CS                     17
+
+        #define BTN_EN1                       33
+        #define BTN_EN2                       31
+
+        //#define FORCE_SOFT_SPI                  // Use this if default of hardware SPI causes display problems
+                                                  //   results in LCD soft SPI mode 3, SD soft SPI mode 0
+
+        #define LCD_RESET_PIN                 23  // Must be high or open for LCD to operate normally.
+
+        #if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
+          #ifndef RGB_LED_R_PIN
+            #define RGB_LED_R_PIN             25
+          #endif
+          #ifndef RGB_LED_G_PIN
+            #define RGB_LED_G_PIN             27
+          #endif
+          #ifndef RGB_LED_B_PIN
+            #define RGB_LED_B_PIN             29
+          #endif
+        #elif ENABLED(FYSETC_MINI_12864_2_1)
+          #define NEOPIXEL_PIN                25
+        #endif
+
+      #endif
+
+    #elif ENABLED(MINIPANEL)
+
+      #define BEEPER_PIN                      42
+      // not connected to a pin
+      #define LCD_BACKLIGHT_PIN               65  // backlight LED on A11/D65
+
+      #define DOGLCD_A0                       44
+      #define DOGLCD_CS                       66
+
+      // GLCD features
+      // Uncomment screen orientation
+      //#define LCD_SCREEN_ROT_90
+      //#define LCD_SCREEN_ROT_180
+      //#define LCD_SCREEN_ROT_270
+
+      #define BTN_EN1                         40
+      #define BTN_EN2                         63
+      #define BTN_ENC                         59
+
+      #define SD_DETECT_PIN                   49
+      #define KILL_PIN                        64
+
+    #elif ENABLED(ZONESTAR_LCD)
+
+      #define ADC_KEYPAD_PIN                  12
+
+    #elif ENABLED(AZSMZ_12864)
+
+      // Pins only defined for RAMPS_SMART currently
+
+    #else
+
+      // Beeper on AUX-4
+      #define BEEPER_PIN                      33
+
+      // Buttons are directly attached to AUX-2
+      #if ENABLED(PANEL_ONE)
+        #define BTN_EN1                       59  // AUX2 PIN 3
+        #define BTN_EN2                       63  // AUX2 PIN 4
+        #define BTN_ENC                       49  // AUX3 PIN 7
+      #else
+        #define BTN_EN1                       37
+        #define BTN_EN2                       35
+        #define BTN_ENC                       31
+      #endif
+
+      #if ENABLED(G3D_PANEL)
+        #define SD_DETECT_PIN                 49
+        #define KILL_PIN                      41
+      #endif
+
+    #endif
+  #endif // NEWPANEL
+
+#endif // HAS_SPI_LCD
+
+#if ENABLED(REPRAPWORLD_KEYPAD)
+  #define SHIFT_OUT                           40
+  #define SHIFT_CLK                           44
+  #define SHIFT_LD                            42
+  #ifndef BTN_EN1
+    #define BTN_EN1                           64
+  #endif
+  #ifndef BTN_EN2
+    #define BTN_EN2                           59
+  #endif
+  #ifndef BTN_ENC
+    #define BTN_ENC                           63
+  #endif
+#endif
--- a/Marlin/src/pins/ramps/pins_TRIGORILLA_CHIRON.h
+++ b/Marlin/src/pins/ramps/pins_TRIGORILLA_CHIRON.h
@@ -0,0 +1,132 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Arduino Mega with RAMPS v1.4 for Anycubic
+ */
+
+#define BOARD_INFO_NAME "Anycubic RAMPS 1.4"
+
+#define IS_RAMPS_EFB
+
+//
+// Servos
+//
+#if MB(TRIGORILLA_14_11)
+  #define SERVO0_PIN                           5
+  #define SERVO1_PIN                           4
+  #define SERVO2_PIN                          11
+  #define SERVO3_PIN                           6
+#endif
+
+//
+// Custom Limit Switches
+//
+//#define ANYCUBIC_4_MAX_PRO_ENDSTOPS
+#if ENABLED(ANYCUBIC_4_MAX_PRO_ENDSTOPS)
+  #define X_MAX_PIN                           43
+  #define Y_MIN_PIN                           19
+#endif
+
+// Labeled pins
+#define TG_HEATER_BED_PIN                      8
+#define TG_HEATER_0_PIN                       10
+#define TG_HEATER_1_PIN                       45  // Anycubic Kossel: Unused
+
+#define TG_FAN0_PIN                            9  // Anycubic Kossel: Usually the part cooling fan
+#define TG_FAN1_PIN                            7  // Anycubic Kossel: Unused
+#define TG_FAN2_PIN                           44  // Anycubic Kossel: Hotend fan
+#define CONTROLLER_FAN_PIN  		              TG_FAN1_PIN
+#define FIL_RUNOUT_PIN                        19
+#define BEEPER_PIN                            31
+#define SDSS                                  53
+#define LED_PIN                               13
+#define SD_DETECT_PIN                         49
+// Remap MOSFET pins to common usages:
+
+#define RAMPS_D10_PIN            TG_HEATER_0_PIN  // HEATER_0_PIN is always RAMPS_D10_PIN in pins_RAMPS.h
+
+#if HOTENDS > 1                                   // EEF and EEB
+  #define RAMPS_D9_PIN           TG_HEATER_1_PIN
+  #if !TEMP_SENSOR_BED
+    // EEF
+    #define RAMPS_D8_PIN             TG_FAN0_PIN
+  #else
+    // EEB
+    #define RAMPS_D8_PIN       TG_HEATER_BED_PIN
+    #define FAN_PIN                  TG_FAN0_PIN  // Override pin 4 in pins_RAMPS.h
+  #endif
+#elif TEMP_SENSOR_BED
+  // EFB (Anycubic Kossel default)
+  #define RAMPS_D9_PIN               TG_FAN0_PIN
+  #define RAMPS_D8_PIN         TG_HEATER_BED_PIN
+#else
+  // EFF
+  #define RAMPS_D9_PIN               TG_FAN1_PIN
+  #define RAMPS_D8_PIN               TG_FAN0_PIN
+#endif
+
+#if HOTENDS > 1 || TEMP_SENSOR_BED                // EEF, EEB, EFB
+  #define FAN1_PIN                   TG_FAN1_PIN
+#endif
+#define FAN2_PIN                     TG_FAN2_PIN
+#define ORIG_E0_AUTO_FAN_PIN         TG_FAN2_PIN  // Used in Anycubic Kossel example config
+
+#ifdef POWER_OUTAGE_TEST
+  #define OUTAGETEST_PIN       79
+  #define OUTAGECON_PIN        58
+#endif
+
+#include "pins_RAMPS_CHIRON.h"
+
+//
+// AnyCubic made the following changes to 1.1.0-RC8
+// If these are appropriate for your LCD let us know.
+//
+#if 0 && HAS_SPI_LCD
+
+  // LCD Display output pins
+  #if BOTH(NEWPANEL, PANEL_ONE)
+    #undef LCD_PINS_D6
+    #define LCD_PINS_D6                       57
+  #endif
+
+  // LCD Display input pins
+  #if ENABLED(NEWPANEL)
+    #if ANY(VIKI2, miniVIKI)
+      #undef DOGLCD_A0
+      #define DOGLCD_A0                       23
+    #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
+      #undef BEEPER_PIN
+      #define BEEPER_PIN                      33
+      #undef LCD_BACKLIGHT_PIN
+      #define LCD_BACKLIGHT_PIN               67
+    #endif
+  #elif ENABLED(MINIPANEL)
+    #undef BEEPER_PIN
+    #define BEEPER_PIN                        33
+    #undef DOGLCD_A0
+    #define DOGLCD_A0                         42
+  #endif
+
+#endif // HAS_SPI_LCD
--- a/README.md
+++ b/README.md
@@ -1,4 +1,4 @@
-# Knutwurst's i3 MEGA (M/S/P/X) Firmware <br>(based on Marlin 2.0.x)
+# Knutwurst's i3 MEGA M/S/P/X und Chiron Firmware <br>(based on Marlin 2.0.x)

 <span style="color: red;">(BITTE GENAU DURCHLESEN! / PLEASE READ CAREFULLY!)</span>

@@ -6,23 +6,22 @@
 <sub>*Es muss jetzt keine großzügige Spende sein. Ein paar Cent reichen um mir zu zeigen, wer überhaupt Interesse daran hat und wem die Weiterentwicklung wichtig ist. So bleibt die Motivation da und ich weiß einfach, dass ich nicht für die Tonne programmiere ;)<sub>


-### Wenn du Fragen hast, schaue gern in der offiziellen [Facebook-Gruppe](https://www.facebook.com/groups/3094090037303577/) vorbei.
+Wenn Du Fragen hast, schaue gern in der offiziellen [Facebook-Gruppe](https://www.facebook.com/groups/3094090037303577/) vorbei.

-### WARNUNG: Der Mega Pro / Mega P Support befindet sich noch in der Entwicklung. Aktuell wird der Laser noch nicht unterstützt, ebensowenig wie das Piezo-Leveling! 

 # Inhaltsverzeichnis (Deutsch)
+<b>WARNUNG:</b> Der Mega Pro / Mega P Support befindet sich noch in der Entwicklung. Aktuell wird der Laser noch nicht unterstützt, ebensowenig wie das Piezo-Leveling!
+
 - [Funktionen](#funktionen)
-   - [Was ist besser?](#besser-im-vergleich-zu-anderen-firmwares-bugfixes)
 - [Häufig gestellte Fragen (FAQ)](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/FAQ-(deutsch))
 - [Fotos / Bilder](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/Pictures)
 - [Downloads](#downloads)


-### WARNING: The Mega Pro / Mega P support is still under development. The laser is currently not supported, nor is piezo leveling!
+# Table of Contents (English)
+<b>WARNING:</b> The Mega Pro / Mega P support is still under development. The laser is currently not supported, nor is piezo leveling!

-# Table of Contets (english)
 - [Features](#features)
-   - [What's better?](#whats-better-in-coparison-to-other-firmwares-bug-fixes)
 - [Frequently asked questions (FAQ)](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/FAQ-(english))
 - [Photos / Pictures](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/Pictures)
 - [Download](#download)
@@ -32,9 +31,9 @@

 ## Funktionen

+ * 4-Punkt Leveling-Hilfe "Easy Leveling"
 * Mesh-Bed Kalibrierung / Autokalibrierung mit [BLTouch (Installations-Anleitung)](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/BLTouch-Installation-(deutsch))
 * S-Kurven Beschleunigung
- * "Juction Deviation" statt des klassischen "Jerk" 
 * "Linear Pressure Control v1.5" aktiviert (kann mit M900 konfiguriert werden)
 * Babystepping während des Druckvorgangs
 * Bilinear Bed Leveling (BBL)
@@ -44,36 +43,22 @@
 * Pause & Filamentwechselfunktion
 * Automatische EEPROM Initialisierung
 * Filament Runout Sensor kann im Menü temporär deaktiviert werden
- * Wiederaufnahme des Drucks nach Stromausfall (WiP)
 * [Druckbettgröße erweitert auf 225 x 220 x 210 mm](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/Set-new-print-bed-size)
 * Automatischer 'Slowdown', falls Daten nicht schnell genug fließen
 * Vollautomatisches Hotend und Ultrabase PID Tuning
 * Optimierungen für [Trinamic TMC Schrittmotortreiber](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/Schrittmotortreiber-gegen-TMC2xxx-tauschen)


-## Besser im Vergleich zu anderen Firmwares (Bugfixes):
- * Aufgeräumtes Special-Menü
- * Drucker hängt sich nicht auf, wenn man Dateien mit Sonderzeichen (Umlaute, Chinesisch etc.) auf der SD Karte hat
- * Kein dummes "wackeln" der Düse nach Stoppen eines Druckvorgangs
- * Kein Abstürzen bei zu vielen Dateien auf der SD Karte
- * Kein Abstürzen bei SD-Karten über 16 GB
- * Fehler "Melodie" bei Thermal Runaway Protection
- * Kein Aufhängen, wenn SD Karte + USB gleichzeitig genutzt wird
- * Kein Aufhängen wenn man Pause drückt
- * Kein Aufhängen, wenn das Filament leer ist
- * Keine "spezielle" BLTouch Firmware nötig. Hier ist alles drin
- * Konfiguration ganz einfach über Feature-Toggles
- * Man muss keine Grundkonfiguration per GCODE machen.
- * Man muss keinen Werksreset durchführen
-
 ---

 # Downloads

-Du kannst die fertigen Binärdateien hier herunterladen: https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/releases. Natürlich kannst du die Firmware mit PlatformIO oder der Arduino IDE auch [selbst kompilieren](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/Howto:-Compile-Firmware-with-PlatformIO).
+Du kannst die fertigen Binärdateien hier herunterladen: https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/releases. Natürlich kannst du die Firmware mit PlatformIO auch [selbst kompilieren](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/Howto:-Compile-Firmware-with-PlatformIO).

 Um es übersichtlich zu gestalten, beinhalten die Dateinamen die einzelnen Features.

+<b>Das Fehlen von Zusätzen (z.B. MEGA_1.0.0.hex) bedeutet, dass die Firmware für den "normalen" i3 Mega gedacht ist, an dem keine Veränderungen vorgenommen wurden.</b>
+
 `_1G` steht für die erste Generation des i3 Mega mit nur einem Z Endstop. Diese Firmware ist nicht für den normalen i3 Mega geeignet!

 `_S` steht für den Mega S mit dem Titan Extruder.
@@ -82,15 +67,17 @@ Um es übersichtlich zu gestalten, beinhalten die Dateinamen die einzelnen Featu

 `_X` steht für den Mega X.

-`_TMC` steht für Trinamic TMC Motortreiber. Hierbei wird auch die Drehrichtung der Motoren invertiert.
+`_TMC` steht für Trinamic TMC Motortreiber. Hierbei wird die Drehrichtung der Motoren invertiert. Sollten die Stecker der Motoren jedoch bereits gedreht sein, nimmt man einfach die Nicht-TMC Version.

-`_DGUS` steht für das "neue" blau/gelbe DGUS II Display, welches sonst kein Special-Menü anzeigen kann.
+`_DGUS` steht für das "neue" blau/gelbe DGUS II Display, welches sonst kein Special-Menü anzeigen kann. (Nur für MEGA S relevant)

 `_BLT` steht für die BL-Touch Version mit Autoleveling-Sensor. Das manuelle Mesh-Leveling ist hier deaktiviert.

-`_10` steht für das Trigorilla_14 v1.0 Mainboard, welches normalerweise der Standard sein sollte.
+`_10` steht für das Trigorilla_14 v1.0 Mainboard, welches normalerweise der Standard sein sollte. (nur für BLTouch relevant)

-`_11` steht für das Trigorilla_14 v1.1 Mainboard, bei welchem sich die Pinbelegung für den Server-Port geändert hat.
+`_11` steht für das Trigorilla_14 v1.1 Mainboard, bei welchem sich die Pinbelegung für den Servo-Port geändert hat. (nur für BLTouch relevant)
+
+<b>Anmerkung: Die Mainboard-Version 1.0 oder 1.1 ist nur für den Einbau des BLTouch Sensors relevant und kann normalerweise ignoriert werden.</b>


 Für (fast) jede Kombination gibt es eine passende Firmware im Download-Bereich. ;)
@@ -104,9 +91,9 @@ Für (fast) jede Kombination gibt es eine passende Firmware im Download-Bereich.

 ## Features:

+ * 4-Point Leveling-Assistant "Easy Leveling"
 * Mesh bed calibration / Auto calibration with [BLTouch (Installation Manual)](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/BLTouch-Installation-(english))
 * S-curve acceleration
- * "Juction Deviation" instead of the classic "Jerk"
 * "Linear Pressure Control v1.5" activated (can be configured with M900)
 * Baby stepping during the printing process
 * Bilinear Bed Leveling (BBL)
@@ -116,34 +103,21 @@ Für (fast) jede Kombination gibt es eine passende Firmware im Download-Bereich.
 * Pause & filament change function
 * Automatic EEPROM initialization
 * Filament runout sensor can be temporarily deactivated in the menu
- * Resumption of printing after a power failure (WiP)
 * [Print bed size enlarged to 225 x 220 x 210 mm](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/Set-new-print-bed-size)
 * Automatic 'slowdown' if data does not flow fast enough
 * Fully automatic hotend and ultrabase PID tuning
 * Optimizations for [Trinamic TMC Stepper drivers](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/Swap-stepper-motor-driver-for-TMC2xxx)

-### What's better in coparison to other firmwares (bug fixes):
- * Tidy special menu
- * Printer does not freeze if you have files with special characters (umlauts, Chinese..) on your SD card
- * No stupid "wobble" of the nozzle after stopping printing
- * No firmware crash when there are too many files on the SD card
- * No crash with SD cards over 16 GB
- * Acoustic alarm in case of a thermal runaway
- * No freezing when SD card + USB is used at the same time
- * No freezing when you press pause and try to resume
- * No freezing when the filament is empty
- * No need for a "special" BLTouch firmware. In this firmware is everything included
- * Configuration made easy via feature toggles
-
-
 ---

 # Download

-You can download the precompiled binary files from here: https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/releases. Of course you can also [compile the firmware yourself](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/Howto:-Compile-Firmware-with-PlatformIO) with PlatformIO or the Arduino IDE.
+You can download the precompiled binary files from here: https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/releases. Of course you can also [compile the firmware yourself](https://github.com/knutwurst/Marlin-2-0-x-Anycubic-i3-MEGA-S/wiki/Howto:-Compile-Firmware-with-PlatformIO) with PlatformIO.

 In order to make it clear, the file names contain the individual features.

+<b>The lack of additions (e.g. MEGA_1.0.0.hex) means that the firmware is intended for the "normal" i3 Mega on which no changes have been made.</b>
+
 `_1G` stands for the firt generation i3 Mega with only one Z endstop. Do NOT use this Firmware on the regular i3 Mega!

 `_S` stands for the Mega S with the titan extruder.
@@ -152,16 +126,17 @@ In order to make it clear, the file names contain the individual features.

 `_X` stands for the Mega X.

-`_TMC` stands for Trinamic TMC motor driver. The direction of rotation of the motors is also inverted.
+`_TMC` stands for Trinamic TMC motor driver. The direction of rotation of the motors is inverted. However, if the plugs of the motors are already turned, you simply take the non-TMC version. 

-`_DGUS` stands for the "new" blue / yellow DGUS II display, which otherwise cannot show a special menu.
+`_DGUS` stands for the "new" blue / yellow DGUS II display, which otherwise cannot show a special menu. (Only relevant for MEGA S)

 `_BLT` stands for the BL-Touch version with auto-leveling sensor. Manual mesh leveling is deactivated here.

-`_10` stands for the Trigorilla_14 v1.0 mainboard, which should normally be the standard.
+`_10` stands for the Trigorilla_14 v1.0 mainboard, which should normally be the standard. (Only relevant for BLTouch)

-`_11` stands for the Trigorilla_14 v1.1 mainboard, on which the pin assignment for the server port has changed.
+`_11` stands for the Trigorilla_14 v1.1 mainboard, on which the pin assignment for the servo port has changed. (Only relevant for BLTouch)

+<b>Note: The mainboard version 1.0 or 1.1 is only relevant for the installation of the BLTouch sensor and can normally be ignored.</b>

 For (almost) every combination there is a suitable firmware in the download area. ;)

--- a/config/default/Configuration.h
+++ b/config/default/Configuration.h
--- a/config/default/Configuration_adv.h
+++ b/config/default/Configuration_adv.h
--- a/deploy_firmware_files.sh
+++ b/deploy_firmware_files.sh
@@ -1,23 +1,27 @@
 #!/bin/bash

-VERSION_FILE="/Users/OKoester/Documents/Arduino/Marlin-2-0-x-Anycubic-i3-MEGA-S-Master/Marlin/src/inc/Version.h"
-FIRMWARE_FOLDER="/Users/OKoester/Documents/Arduino/Marlin-2-0-x-Anycubic-i3-MEGA-S-Master/.pio/build/"
-OUTPUT_FOLDER="/Users/OKoester/Desktop/i3_FIRMWARE"
+BASE_PATH="$( cd "$( dirname "${BASH_SOURCE[0]}" )" >/dev/null 2>&1 && pwd )"
+CURRENT_USER="$(whoami)"

-CUSTOM_BUILD_VERSION=$(egrep -o "([0-9]{1,}\.)+[0-9]{1,}" $VERSION_FILE -m2 | tail -n1)
+VERSION_FILE="$BASE_PATH/Marlin/src/inc/Version.h"
+FIRMWARE_FOLDER="$BASE_PATH/.pio/build/"
+OUTPUT_FOLDER="/Users/$CURRENT_USER/Desktop/i3_FIRMWARE"
+
+CUSTOM_BUILD_VERSION=$(egrep -o "([0-9]{1,}\.)+[a-zA-Z0-9_.-]{1,}" $VERSION_FILE -m2 | tail -n1)

 if [ -d "$$OUTPUT_FOLDER/v$CUSTOM_BUILD_VERSION" ]; then
    echo "$$OUTPUT_FOLDER/$CUSTOM_BUILD_VERSION already exists."
 else 
-    mkdir $OUTPUT_FOLDER/$CUSTOM_BUILD_VERSION
+    mkdir -p $OUTPUT_FOLDER/$CUSTOM_BUILD_VERSION
 fi

 echo "Knutwurst's Mega Firmware Version: $CUSTOM_BUILD_VERSION"

-cd $FIRMWARE_FOLDER
-for dir in $FIRMWARE_FOLDER/*/
-do
-    dir=${dir%*/}
-    echo ${dir##*/}
-    cp ${dir##*/}/firmware.hex /$OUTPUT_FOLDER/$CUSTOM_BUILD_VERSION/${dir##*/}_v$CUSTOM_BUILD_VERSION.hex
-done
+pushd $FIRMWARE_FOLDER
+  for dir in $FIRMWARE_FOLDER/*/
+  do
+      dir=${dir%*/}
+      echo ${dir##*/}
+      cp ${dir##*/}/firmware.hex /$OUTPUT_FOLDER/$CUSTOM_BUILD_VERSION/${dir##*/}_v$CUSTOM_BUILD_VERSION.hex
+  done
+popd
--- a/i3_mega_envs.ini
+++ b/i3_mega_envs.ini
@@ -10,7 +10,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_ONE_Z_ENDSTOP
-build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_CHIRON

 [env:MEGA_1G_TMC]
 platform          = atmelavr
@@ -20,7 +20,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP
-build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH -DKNUTWURST_CHIRON

 [env:MEGA_1G_BLT_10]
 platform          = atmelavr
@@ -30,7 +30,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP
-build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC
+build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_CHIRON

 [env:MEGA_1G_BLT_11]
 platform          = atmelavr
@@ -40,7 +40,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP
-build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC
+build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_CHIRON

 [env:MEGA_1G_TMC_BLT_10]
 platform          = atmelavr
@@ -50,7 +50,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP
-build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT
+build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_CHIRON

 [env:MEGA_1G_TMC_BLT_11]
 platform          = atmelavr
@@ -60,7 +60,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP
-build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT
+build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_CHIRON


 #
@@ -75,7 +75,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA
-build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON

 [env:MEGA_TMC]
 platform          = atmelavr
@@ -85,7 +85,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_TMC
-build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON

 [env:MEGA_BLT_10]
 platform          = atmelavr
@@ -95,7 +95,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_BLTOUCH
-build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC
+build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON

 [env:MEGA_BLT_11]
 platform          = atmelavr
@@ -105,7 +105,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA -DKNUTWURST_BLTOUCH
-build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC
+build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON

 [env:MEGA_TMC_BLT_10]
 platform          = atmelavr
@@ -115,7 +115,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
-build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT
+build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON

 [env:MEGA_TMC_BLT_11]
 platform          = atmelavr
@@ -125,7 +125,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
-build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT
+build_unflags     = -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON



@@ -140,7 +140,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON

 [env:MEGA_S_TMC]
 platform          = atmelavr
@@ -150,7 +150,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_TMC
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON

 [env:MEGA_S_BLT_10]
 platform          = atmelavr
@@ -160,7 +160,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_BLTOUCH
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON

 [env:MEGA_S_BLT_11]
 platform          = atmelavr
@@ -170,7 +170,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_S -DKNUTWURST_BLTOUCH
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON

 [env:MEGA_S_TMC_BLT_10]
 platform          = atmelavr
@@ -180,7 +180,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON

 [env:MEGA_S_TMC_BLT_11]
 platform          = atmelavr
@@ -190,7 +190,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_S -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON



@@ -205,7 +205,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON

 [env:MEGA_S_DGUS_TMC]
 platform          = atmelavr
@@ -215,7 +215,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON

 [env:MEGA_S_DGUS_BLT_10]
 platform          = atmelavr
@@ -225,7 +225,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_TMC
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON

 [env:MEGA_S_DGUS_BLT_11]
 platform          = atmelavr
@@ -235,7 +235,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_TMC
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON

 [env:MEGA_S_DGUS_TMC_BLT_10]
 platform          = atmelavr
@@ -245,7 +245,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON

 [env:MEGA_S_DGUS_TMC_BLT_11]
 platform          = atmelavr
@@ -255,7 +255,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_S -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON



@@ -270,7 +270,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON

 [env:MEGA_X_TMC]
 platform          = atmelavr
@@ -280,7 +280,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_TMC
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON

 [env:MEGA_X_BLT_10]
 platform          = atmelavr
@@ -290,7 +290,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_BLTOUCH
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_DGUS2_TFT
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON

 [env:MEGA_X_BLT_11]
 platform          = atmelavr
@@ -300,7 +300,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_X -DKNUTWURST_BLTOUCH
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_DGUS2_TFT
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON

 [env:MEGA_X_TMC_BLT_10]
 platform          = atmelavr
@@ -310,7 +310,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON

 [env:MEGA_X_TMC_BLT_11]
 platform          = atmelavr
@@ -320,7 +320,72 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+
+#
+#  i3 Mega X (new TFT)
+#
+[env:MEGA_X_DGUS]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_X_DGUS_TMC]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_X_DGUS_BLT_10]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_X_DGUS_BLT_11]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_X_DGUS_TMC_BLT_10]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+[env:MEGA_X_DGUS_TMC_BLT_11]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_X -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_P -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+



@@ -335,7 +400,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_P -DKNUTWURST_BMG -DKNUTWURST_DGUS2_TFT
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON

 [env:MEGA_P_TMC]
 platform          = atmelavr
@@ -345,7 +410,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_BMG -DKNUTWURST_DGUS2_TFT
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_BLTOUCH
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON

 [env:MEGA_P_BLT_10]
 platform          = atmelavr
@@ -355,7 +420,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_P -DKNUTWURST_BMG -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_TMC 
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON

 [env:MEGA_P_BLT_11]
 platform          = atmelavr
@@ -365,7 +430,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_P -DKNUTWURST_BMG -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_TMC 
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_TMC -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON

 [env:MEGA_P_TMC_BLT_10]
 platform          = atmelavr
@@ -375,7 +440,7 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14 -DKNUTWURST_MEGA_P -DKNUTWURST_BMG -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON

 [env:MEGA_P_TMC_BLT_11]
 platform          = atmelavr
@@ -385,4 +450,56 @@ lib_deps          = ${common.lib_deps}
  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
 src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
 build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_14_11 -DKNUTWURST_MEGA_P -DKNUTWURST_BMG -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_DGUS2_TFT 
-build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_ONE_Z_ENDSTOP -DKNUTWURST_CHIRON
+
+
+#
+#  Chiron
+#
+
+[env:CHIRON]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_CHIRON -DKNUTWURST_CHIRON
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP
+
+[env:CHIRON_TMC]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_CHIRON -DKNUTWURST_CHIRON -DKNUTWURST_TMC
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_DGUS2_TFT -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP
+
+
+#
+#  Chiron (new TFT)
+#
+
+[env:CHIRON_DGUS]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_CHIRON -DKNUTWURST_CHIRON -DKNUTWURST_DGUS2_TFT
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_TMC -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP
+
+[env:CHIRON_DGUS_TMC]
+platform          = atmelavr
+board             = megaatmega2560
+board_build.f_cpu = 16000000L
+lib_deps          = ${common.lib_deps}
+  TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
+src_filter        = ${common.default_src_filter} +<src/HAL/AVR>
+build_flags       = ${common.build_flags} -DMOTHERBOARD=BOARD_TRIGORILLA_CHIRON -DKNUTWURST_CHIRON -DKNUTWURST_DGUS2_TFT -DKNUTWURST_TMC
+build_unflags     = -DKNUTWURST_MEGA -DKNUTWURST_MEGA_S -DKNUTWURST_MEGA_X -DKNUTWURST_MEGA_P -DKNUTWURST_BLTOUCH -DKNUTWURST_ONE_Z_ENDSTOP
+
+
--- a/images/max_resolution_cura.jpg
+++ b/images/max_resolution_cura.jpg
--- a/platformio.ini
+++ b/platformio.ini
@@ -29,15 +29,14 @@
 [platformio]
 src_dir      = Marlin
 boards_dir   = buildroot/share/PlatformIO/boards
-#default_envs = mega2560
 extra_configs = i3_mega_envs.ini
 default_envs =
  MEGA_1G
  MEGA_1G_TMC
-#  MEGA_1G_BLT_10
-#  MEGA_1G_BLT_11
-#  MEGA_1G_TMC_BLT_10
-#  MEGA_1G_TMC_BLT_11
+  MEGA_1G_BLT_10
+  MEGA_1G_BLT_11
+  MEGA_1G_TMC_BLT_10
+  MEGA_1G_TMC_BLT_11
  MEGA
  MEGA_TMC
  MEGA_BLT_10
@@ -62,12 +61,22 @@ default_envs =
  MEGA_X_BLT_11
  MEGA_X_TMC_BLT_10
  MEGA_X_TMC_BLT_11
-#  MEGA_P
-#  MEGA_P_TMC
-#  MEGA_P_BLT_10
-#  MEGA_P_BLT_11
-#  MEGA_P_TMC_BLT_10
-#  MEGA_P_TMC_BLT_11
+  MEGA_X_DGUS
+  MEGA_X_DGUS_TMC
+  MEGA_X_DGUS_BLT_10
+  MEGA_X_DGUS_BLT_11
+  MEGA_X_DGUS_TMC_BLT_10
+  MEGA_X_DGUS_TMC_BLT_11
+  MEGA_P
+  MEGA_P_TMC
+  MEGA_P_BLT_10
+  MEGA_P_BLT_11
+  MEGA_P_TMC_BLT_10
+  MEGA_P_TMC_BLT_11
+  CHIRON
+  CHIRON_TMC
+  CHIRON_DGUS
+  CHIRON_DGUS_TMC

 # *******************************************************************************************
 # **                                                                                       **